How to adjust database table using ABAP code

Hi Experts,
There is any function module can use to adjust the db table?
Because I found that after I modified the database table by using FM 'DDIF_TABL_PUT' and 'DDIF_TABL_ACTIVATE',
the table feel like no changes when I check the table in SE11.
But after I switched to edit mode, then only table changed to the expected properties.
Hope anyone can some hints,
Thanks in advance.

Thanks, your answer is helpful.
But I found a answer after debug SE14,
Share the answer if anyone need:
DD_DATABASE_UTILITY

Similar Messages

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

Update MS Access Database table using ABAP

Hi All,
I have a requirement wherein I have to update the existing records in MS Access database using ABAP Code. Can someone provide sample code through which I can achieve this. Thanks!!!
Regards,
Nitish Reddy.
Edited by: Nitish Cherukupally on Mar 30, 2009 4:02 PM

hi,
please refer to this link
http://learningabap.wordpress.com/2007/04/11/get-data-from-ms-access-into-internal-table/
http://abapcode.blogspot.com/2007/05/get-data-from-ms-access-into-internal.html
http://abapcode.blogspot.com/2007/06/sample-program-to-upload-excel-document.html
MS Access Database using ABAP Program
thanks

How to bypass printer setting using abap code?

Dear All,
I want to bypass printer setting using abap code?
I am printing sticker using a code and i dont want to display printer setting .
I want direct ouput ?
Regards
Steve

Are you using reports or scripts/smart forms? You can use the parameter for no_dialog = space(use the relevant parameter).

GL Migration from Classic GL to New GL using ABAP code

Dear Experts,
In this scenario, I am trying to develop ABAP Program which will Transfer Documents from GLT0 to FAGL* Table, i want to take opinion about
Is it feasible to update Database Table using ABAP Query(Using INSERT, UPDATE or MODIFY)?
What are possibilities of Database get into inconsistent state?
Any other factors I must consider during this task?
Regard,
Pritesh Raut

Why do you want to reinvent the wheel?
Look at some documentation like
Migration to New General Ledger Accounting (General)Quick Migration for Basic Scenario
1070629 - FAQs: Migration to General Ledger Accounting (new)
Mastering the Implementation of General Ledger Functionality in SAP ERP Financials
Regards,
Raymond

In ecatt - how to check at database level using ABAP

Hi,
How to check at database level using ABAP in Ecatt tool.
say,for example I want to check a particular sales order is invoiced or not ,at the database level and if it is invoiced I have stop proceeding to invoicing of that sales order number.
Could anybody suggest on this with an example?
thanks.

Hi,
you can use the command GETTAB to access single db records.
Full specified or partitial specified keys can be use at GETTAB. It will return always only one record, also if a couple could match your selection.
For more advanced scenarios you can also use eCATTs Inline ABAP. In a block between the commands ABAP. ENDABAP. you can code ABAP statements, e.g. SELECT ... INTO TABLE ...
eCATT script parameters of type 'V' defined in that script using ABAP/ENDABAP will be transfered into the ABAP block and back to script after ABAP perform.
Best regards
Jens

How to update field values in a database table using module pool prg?

hi
how to update field values in a database table using module pool prg?
we created a customized table, and we put 2 push buttons in screen painter update and display.
but update is not working?
data is enter into screen fields and to internal table, but it is not updated in database table.
thanks in adv
vidya

HI,
we already used the update statement. but its not working.
plz check this.
*& Module Pool       ZCUST_CALL_REC
PROGRAM ZCUST_CALL_REC.
TABLES: ZCUST_CALL_REC,ZREMARKS.
data: v_kun_low like ZCUST_CALL_REC-kunnr ,
       v_kun_high like ZCUST_CALL_REC-kunnr,
       v_bud_low like ZCUST_CALL_REC-budat,
       v_bud_high like ZCUST_CALL_REC-budat.
ranges r_kunnr for ZCUST_CALL_REC-kunnr .
ranges r_budat for zcust_call_rec-budat.
DATA: ITAB TYPE STANDARD TABLE OF ZCUST_CALL_REC WITH HEADER LINE,
      JTAB TYPE STANDARD TABLE OF ZREMARKS WITH HEADER LINE.
*data:begin of itab occurs 0,
    MANDT LIKE ZCUST_CALL_REC-MANDT,
    kunnr like ZCUST_CALL_REC-kunnr,
    budat like ZCUST_CALL_REC-budat,
    code like ZCUST_CALL_REC-code,
    remarks like ZCUST_CALL_REC-remarks,
    end of itab.
*data:begin of Jtab occurs 0,
    MANDT LIKE ZCUST_CALL_REC-MANDT,
    kunnr like ZCUST_CALL_REC-kunnr,
    budat like ZCUST_CALL_REC-budat,
    code like ZCUST_CALL_REC-code,
    remarks like ZCUST_CALL_REC-remarks,
    end of Jtab.
CONTROLS:vcontrol TYPE TABLEVIEW USING SCREEN '9001'.
CONTROLS:vcontrol1 TYPE TABLEVIEW USING SCREEN '9002'.
*start-of-selection.
*&      Module USER_COMMAND_9000 INPUT
      text
MODULE USER_COMMAND_9000 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
WHEN 'ENQUIRY'.
perform multiple_selection.
perform append_CUSTOMER_code.
PERFORM SELECT_DATA.
call screen '9001'.
WHEN 'UPDATE'.
      perform append_CUSTOMER_code.
      PERFORM SELECT_DATA.
      call screen '9002'.
      perform update on commit.
WHEN 'DELETE'.
      perform append_CUSTOMER_code.
      PERFORM SELECT_DATA.
      call screen '9002'.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
*&      Module STATUS_9000 OUTPUT
      text
MODULE STATUS_9000 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9001 INPUT
      text
MODULE USER_COMMAND_9001 INPUT.
CASE sy-ucomm.
WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
SET SCREEN 0.
LEAVE SCREEN.
CLEAR sy-ucomm.
endcase.
ENDMODULE.                 " USER_COMMAND_9001 INPUT
*&      Module STATUS_9001 OUTPUT
      text
MODULE STATUS_9001 OUTPUT.
SET PF-STATUS 'ZCUSTOMER'.
SET TITLEBAR 'xxx'.
move itab-MANDT   to zcust_call_rec-MANDT.
move itab-kunnr   to zcust_call_rec-kunnr.
move itab-budat   to zcust_call_rec-budat.
move itab-code    to zcust_call_rec-code.
move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
ENDMODULE.                 " STATUS_9001 OUTPUT
*&      Module USER_COMMAND_9002 INPUT
      text
module USER_COMMAND_9002 input.
CASE sy-ucomm.
   WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
      SET SCREEN 0.
      LEAVE SCREEN.
      CLEAR sy-ucomm.
   WHEN 'UPDATE'.
         perform move_data.
     UPDATE ZCUST_CALL_REC FROM TABLE ITAB.
        IF SY-SUBRC = 0.
           MESSAGE I000(0) WITH 'RECORDS ARE UPDATED'.
         ELSE.
           MESSAGE E001(0) WITH 'RECORDS ARE NOT UPDATED'.
        ENDIF.
WHEN 'DELETE'.
         perform move_data.
         DELETE ZCUST_CALL_REC FROM TABLE ITAB.
          IF SY-SUBRC = 0.
           MESSAGE I000(0) WITH 'RECORDS ARE DELETED'.
         ELSE.
           MESSAGE E001(0) WITH 'RECORDS ARE NOT DELETED'.
        ENDIF.
endcase.
endmodule.                 " USER_COMMAND_9002 INPUT
*&      Module STATUS_9002 OUTPUT
      text
module STATUS_9002 output.
SET PF-STATUS 'ZCUSTOMER1'.
SET TITLEBAR 'xxx'.
endmodule.                 " STATUS_9002 OUTPUT
*&      Module update_table OUTPUT
      text
module update_table output.
     move itab-MANDT   to zcust_call_rec-MANDT.
     move itab-kunnr   to zcust_call_rec-kunnr.
     move itab-budat   to zcust_call_rec-budat.
     move itab-code    to zcust_call_rec-code.
     move itab-remarks to zcust_call_rec-remarks.
vcontrol-lines = sy-dbcnt.
endmodule.                 " update_table OUTPUT
***Selection Data
FORM SELECT_DATA.
SELECT mandt kunnr budat code remarks FROM zcust_call_rec INTO
                        table itab
                         WHERE kunnr IN r_kunnr AND BUDAT IN R_BUDAT.
ENDFORM.
****append vendor code
FORM APPEND_CUSTOMER_CODE.
clear r_kunnr.
clear itab.
clear r_budat.
refresh r_kunnr.
refresh itab.
refresh r_kunnr.
IF r_kunnr IS INITIAL
              AND NOT v_kun_low IS INITIAL
               AND NOT v_kun_high IS INITIAL.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                                EXPORTING
                                   input         = v_kun_low
                                IMPORTING
                                   OUTPUT        = r_kunnr-low.
                   CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                              EXPORTING
                                  input         = v_kun_high
                              IMPORTING
                                  OUTPUT        = r_kunnr-high.
                 r_kunnr-option = 'BT'.
                 r_kunnr-sign = 'I'.
                 append r_kunnr.
   PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
              AND NOT v_kun_low IS INITIAL
               AND v_kun_high IS INITIAL.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                                EXPORTING
                                   input         = v_kun_low
                                IMPORTING
                                   OUTPUT        = r_kunnr-low.
                r_kunnr-SIGN = 'I'.
                r_kunnr-OPTION = 'EQ'.
                APPEND r_kunnr.
   PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
              AND v_kun_low IS INITIAL
               AND NOT v_kun_high IS INITIAL.
                    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
                                EXPORTING
                                   input         = v_kun_low
                                IMPORTING
                                   OUTPUT        = r_kunnr-low.
                r_kunnr-SIGN = 'I'.
                r_kunnr-OPTION = 'EQ'.
                APPEND r_kunnr.
      PERFORM V_BUDAT.
ELSEIF r_kunnr IS INITIAL
              AND v_kun_low IS INITIAL
               AND v_kun_high IS INITIAL.
                    IF SY-SUBRC = 0.
                         MESSAGE I003(0) WITH 'ENTER CUSTOMER NUMBER'.
                          CALL SCREEN '9000'.
                    ENDIF.
PERFORM V_BUDAT.
ENDIF.
ENDFORM.
FORM V_BUDAT.
IF R_BUDAT IS INITIAL
               AND NOT v_BUD_low IS INITIAL
               AND NOT v_BUD_high IS INITIAL.
                 r_budat-low = v_bud_low.
                 r_budat-high = v_bud_high.
                 r_budat-option = 'BT'.
                 r_budat-sign = 'I'.
                 append r_budat.
         ELSEIF R_BUDAT IS INITIAL
               AND NOT v_BUD_low IS INITIAL
               AND v_BUD_high IS INITIAL.
                 r_budat-low = v_bud_low.
                 r_budat-high = v_bud_high.
                 r_budat-option = 'EQ'.
                 r_budat-sign = 'I'.
                 append r_budat.
         ELSEIF R_BUDAT IS INITIAL
               AND v_BUD_low IS INITIAL
               AND NOT v_BUD_high IS INITIAL.
                 r_budat-HIGH = v_bud_HIGH.
                 r_budat-option = 'EQ'.
                 r_budat-sign = 'I'.
                 append r_budat.
          ELSEIF R_BUDAT IS INITIAL
               AND v_BUD_low IS INITIAL
               AND v_BUD_high IS INITIAL.
               IF SY-SUBRC = 0.
                   MESSAGE I002(0) WITH 'ENTER POSTING DATE'.
                  CALL SCREEN '9000'.
                r_budat-low = ''.
                r_budat-option = ''.
                r_budat-sign = ''.
                ENDIF.
        ENDIF.
ENDFORM.
*&      Form update
      text
--> p1        text
<-- p2        text
form update .
commit work.
endform.                    " update
*&      Form move_data
      text
--> p1        text
<-- p2        text
form move_data .
   clear itab.
refresh itab.
       move-corresponding zcust_call_rec to itab.
       MOVE ZCUST_CALL_REC-MANDT   TO ITAB-MANDT.
       MOVE ZCUST_CALL_REC-KUNNR   TO ITAB-KUNNR.
       MOVE ZCUST_CALL_REC-BUDAT   TO ITAB-BUDAT.
       MOVE ZCUST_CALL_REC-CODE    TO ITAB-CODE.
       MOVE ZCUST_CALL_REC-REMARKS TO ITAB-REMARKS.
     APPEND ITAB.
     delete itab where kunnr is initial.
endform.                    " move_data
thanks in adv
vidya

How to generate new perner number using Abap Code in pa0002. what is the fu

how to generate new perner number using Abap Code in pa0002. what is the function Module used.

hi
define internal number ranges for ur implementation then when u run PA 40 do not input any employee number , system will generate the employee number automatically.
Regards
sameer

How to Use CMOD and SMOD in SAP using ABAP Code

Hello anyone,
Please help me How to use CMOD and SMOD in SAP using ABAP code.
Give Me Some Sample Example.
Mail ID: [email protected]
Thanks,
Regards,
S.Muthu,
SAP Developer.

Hi,
User Exits.
http://www.erpgenie.com/sap/abap/code/abap26.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
customer exits
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f1a7e790-0201-0010-0a8d-f08a4662562d
Menu Exit.
http://www.sappoint.com/abap/spmp.pdf
http://www.sappoint.com/abap/userexit.pdf
http://www.sapdevelopment.co.uk/enhance/mod_sapmenu.htm
http://www.sapdevelopment.co.uk/enhance/enhancehome.htm
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html

Access table using ABAP program in other database

Dear SAP Expert,
We have requirement that related to SAP interface.
Our SAP system run on Oracle database 11g (Unix).
Illustration: SAP system = A non SAP system = B
We need to access a table using ABAP program (from SAP system A) in other database (system B) that are not necessarily SAP database. The non-SAP system using SQL Server 2008 (Windows).
What is the best practice for this interface
Do we need database link? If yes, please help to inform me the details step to configure it.
Thanks and Regards

Hi Friend,
You try using an intermediate system..passing your input required to fetch the data..and PI should call the respective query to retrive record..once the full flow is completed you should get the return through some table in the calling program.
else.
ask the other system guy to write a function with select query and ask him to expose as RFC and that RFC we have to call it as RFC in our program to get the required values and only thing we need here is a proper connector in place.
Regards
S.Janagar

How to transfer database table contain null values, primary key, and foreign key to the another database in same server. using INSERT method.

how to transfer database table contain null values, primary key, and foreign key to the another database in same server. using INSERT method. thanks

INSERT targetdb.dbo.tbl (col1, col2, col3, ...)
SELECT col1, col2, col3, ...
FROM sourcedb.dbo.tbl
Or what is your question really about? Since you talke about foreign keys etc, I suspect that you want to transfer the entire table definition, but you cannot do that with an INSERT statement.
Erland Sommarskog, SQL Server MVP, [email protected]

Creating a long text using ABAP code.. fm SAVE_TEXT

When you create an order via IW31 one of the options is to click on the text button and create a long text. I am basically trying to mimic this action from within my ABAP code.
The text id details are as follows:
Text Name       500000015000046 which is (5000000 + order number)
Language        EN
Text ID            KOPF         Order header text
Text Object      AUFK       Order text
If i manually create the text within the transaction i am then able to view and update it via function modules READ_TEXT and SAVE_TEXT. But if the text has not already been created READ_TEXT obviously returns nothing as it does not exist and SAVE_TEXT does not seem to created it!
Anyone know how i would go about creating this text using ABAP code?
Hope this make a bit of sense
Thanks in advance
Mart

I have implemented the code as i think it should be. See below, can any see what is wrong. If i add init_text it makes no difference and adding the commit_text just makes it hang
DATA: IT_TEXTS type standard table of TLINE,
       wa_texts like line of it_texts,
       wa_txtheader type THEAD.
wa_txtheader-TDID     = 'KOPF'.
wa_txtheader-TDSPRAS = 'EN'.
wa_txtheader-TDNAME   = '500000015000056'.
wa_txtheader-TDOBJECT = 'AUFK'.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
wa_texts-tdformat = '*'.
wa_texts-tdline = 'hello'.
append wa_texts to it_texts.
CALL FUNCTION 'SAVE_TEXT'
EXPORTING
    CLIENT                = SY-MANDT
    HEADER                = wa_txtheader
    INSERT                = 'X'
   SAVEMODE_DIRECT       = ' '
   OWNER_SPECIFIED       = 'X'
LOCAL_CAT             = ' '
IMPORTING
FUNCTION              =
NEWHEADER             =
TABLES
    LINES                 = IT_TEXTS
EXCEPTIONS
   ID                    = 1
   LANGUAGE              = 2
   NAME                  = 3
   OBJECT                = 4
   OTHERS                = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

Synchronizing Two Custom Z Tables Using Abap Program

Hi,
    My requirement is Synchronizing two custom z tables using abap program me.
I have vendors in two tables, i have to select the common vendors from first which are existing in second table also.
In first table each vendor can have more than one supplier types in one field only. In second table these supplier types are divided into
different fields.
     My requirement is I have to check supplier types in first table and i have to pass X to corresponding supplier types in second table vendor.
I have to pass X value for each depending in Second table depending upon supplier type in first table.
. How to do it can any one suggest with code.
Thanks in Advance,
Vivek
<subject edited by moderator>
Message was edited by: Manish Kumar

Hi,
Imho, you need to get (meaning, extract into separate fields) the different supplier types from Table1 first. Your key for Table1 is the vendor no, which is also the key in Table2 (or the key for Table2 is Vendor no & Type).
For better performance, better select multiple/all required entries from Table1 instead of doing a select endselect.
Depending on the format of the vendortypes in Table1, put them in a new itab (for our purpose named Table1New where vendor no & type are the only 2 fields. For example, if the type length is fixed to 2 chars, or divided by space,... use your coding accordingly.
Next step is to select all vendor no's in Table2 which you have selected in Table1. If in Table2, the vendor no is the only key (and the all vendor types are filled in a single record), then loop check the vendor types from Table1New against the types in Table2.
If the key of Table2 is vendor no & vendor type, then do a read table for the key.
The logic in pseudo-code:
Select from Table1 into table. If you'd like to limit the selection size, add package size statement.
     extract the vendor types in to itab Table1New.
     Select the vendor & types from Table2 by using the for all entries option (better performance).
     loop at Table1New
          check in Table2:
               if the unique key is vendor no: check all fields for the vendor type from Table1New
               if the unique key combo is vendor no & type: check by using a read table.
          If not found => add entry to Table2
     endloop.
endselect Table1 (when using package size)
I guess the most difficult step is to extract the types from Table1 into separate fields, all the rest seems straight forward. Please keep in mind the itab type definitions for a better performance.
Good luck!
Best regards,
Zhou

HOW TO creat BAR CHART using ABAP Programming

DEAR ALL,
I want some help as to how to creat GRAPHICAL display using ABAP programing (BAR CHART) any sample codes Example will be very helpful.
Regards,
VJ

On earlier versions, you can do something like this.
[code]
REPORT ZRICH_0005 .
DATA: BEGIN OF ITAB_DATA OCCURS 0,
           DATANAME(15),
           QUANTITY1 TYPE I,
           QUANTITY2 TYPE I,
           QUANTITY3 TYPE I,
      END OF ITAB_DATA.
Data: BEGIN OF ITAB_OPTIONS OCCURS 0,
           OPTION(20),
      END OF ITAB_OPTIONS.
ITAB_DATA-DATANAME = 'Maple'.
ITAB_DATA-QUANTITY1 = 5500.
ITAB_DATA-QUANTITY2 = 6200.
ITAB_DATA-QUANTITY3 = 5900.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Oak'.
ITAB_DATA-QUANTITY1 = 3500.
ITAB_DATA-QUANTITY2 = 5200.
ITAB_DATA-QUANTITY3 = 4400.
APPEND ITAB_DATA.
ITAB_DATA-DATANAME = 'Cherry'.
ITAB_DATA-QUANTITY1 = 1800.
ITAB_DATA-QUANTITY2 = 2200.
ITAB_DATA-QUANTITY3 = 1900.
APPEND ITAB_DATA.
CALL FUNCTION 'GRAPH_MATRIX_3D'
     EXPORTING
          COL1        = 'Jan'
          COL2        = 'Feb'
          COL3        = 'Mar'
          TITL        = 'Lumber Usage in $'
     TABLES
          DATA        = ITAB_DATA
          OPTS        = ITAB_OPTIONS
     EXCEPTIONS
          OTHERS      = 1.
[/code]
Regards,
Rich Heilman

How to adjust database table using ABAP code

Similar Messages

Maybe you are looking for