How to adjust Horizontal/Vertical display of Touch Smart screen

Hi Group,
I recently purchased the IQ505 and have fallen in love with it. However, (a small thing) the monitor displays my PowerPoint slides slightly "taller" than they should be (stretched vertically) . Most monitors I have used in the past have, either a physical adjust, or a software adjust. I can't find either on this one. Sure hope it can be adjusted. Thanks.

Ok, let me google that for you,...
http://letmegooglethatforyou.com/?q=powerpoint+widescreen+display
Look at the very first article in that list,...
Make screenshow fill a wide screen display
6 Dec 2008 ... From the PowerPoint FAQ: Make screenshow fill a wide screen display -- This explains how to format your PowerPoint presentation so that it ...
www.pptfaq.com/FAQ00566.htm
HP ENVY 17-j005tx Notebook, HP ENVY Recline 27-k001a, HP ProLiant MicroServer Gen8 G2020T, HP MediaSmart EX495 Server, HP MediaVault 2020, HP ENVY 120 AiO Printer

Similar Messages

How much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?, how much is to change the ipod touch 5 screen at a London authorized apple store or technical support?

Big thank you, KP.
I will try it out Though I did try something similar before I posted to you ... and was unsuccessful

Why is my BRAND NEW touch smart screen not recognizing my touch?

I can't figure out why when I purchased my HP touch smart screen computer, at the store on display, it was working, and now when I set it all up, it doesn't recognize my finger touch!

If it doesn't even make a chirping noise when you touch the screen, it may be defective.

Purple line at the bottom of the touch smart screen

I have a purple line at the bottom of my touch smart screen , that is causing the icons to flicker rapidly . How can i resolve this .

Hello,
If you restart your system, is that purple line still there?
During the boot process into windows, do you still have that same line?
If you boot into BIOS or into safemode, is that line still there?
You can try to remove the video card driver and see if that resolves if not, better to try to update the video card driver, but for that, you need to tell me what computer model you have, the exact and entire model.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

How to adjust webpages to fully fit the C470 screen

Hi all
Appreciate any guidance on how to adjust the size of a webpage to fully fill the 21.5" screen of C470. Enlarging by Ctrl+ or Fullscreen F11 won't help as the zooming originate from the centre outwards resulting in the truncation of the height of a webpage. Thanks in advance
Regards
kh

Doesn't always work the way you think it should but you could try dropping the Broadcast Safe filter on the entire clip.
You could also just cut the clip where the brightness first appears and add the 3 way Color Corrector. Adjust it to where you like it and then add a disolve between the clips. (may or may not do it for you depending on how the bright spot comes into frame, but it's a fast workaround) Could keyframe the 3 way in if you like.
There are other things you can do with the 3 way to limit it's effect but to get a grip on it you should probably refer to the manual.
rh

How to edit the buttons on iPod Touch home screen

How do you move around/delete icons on the iPod Touch home screen?

Hold one of the buttons until they all wiggle, drag around as desired (also to new home screens) and press home button to stop the madness.
This is all provided, however, that you have the 2.0 or the January Upgrade.
Hope this helps.

Turn off touch smart screen temporarily

I can't work on the Touch Smart at night because little bugs land on the screen and change the focus. How can I temporarily disable the touch function?

Hello riverguy,
See if these steps help you.
Open Control Panel
Select "Pen and Touch"
Select the "Touch" tab
Uncheck the checkbox that says "Use your finger as an input device"
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

How do I compensate for display objects jumping when screen scaling

I am building an application that is to run at 2 difference stage sizes. 960x640 and 1024x768 (for those paying attention, you may note that those are the high res settings for the iPhone and iPad2)
The app was designed and build to run on a stage of 960x640 and when running at this size, there are no problems.
When the app loads in the 1024x768 window, it "strechs" the stage to fill the window, but keeps the aspect ratio. Everything looks good and the application runs without any problems expect for one thing.
Sometimes, display objects on the stage "jitter" when moving or animating. I have discovered that this is because the stage is "scaling" the x and y values, and is not pixel snapping the objects on the screen, even though the x and y values of the display object are indeed whole numbers.
A prime example of this is I have 2 bitmapData images. bmData_s and bmData_h.
bmData_s is 192x388 in size.
bmData_h is created from a copy of bmData_s with a glow filter stroke on it, resulting in a image that is 198x394 (6 pixels bigger due to a 3 pixel stroke)
I place it on the screen using the following code:
(Background is a bitmap object that is 960x480 and places at 0,0)
(ObjOffset is a point in my app data to position the object, it's a point set to 53,195)
MyObj.x = Background.x + ObjOffset.x + (bmData_s.width/2);
MyObj.y = Background.y + ObjOffset.y + (bmData_s.height/2);
now, when the mouse rolls over the object, I have an event listener to change MyObj.bitmapData to bmData_h
MyObj.bitmapData = bmData_h;
MyObj.x = Background.x + ObjOffset.x + Math.floor(bmData_h.width/2);
MyObj.y = Background.y + ObjOffset.y + Math.floor(bmData_h.height/2);
and back to the _s image on mouse out.
Now, when the app runs on the iPhone which is a 960x640 screen size, or on the PC which is using a window of similiar size, the image doesn't appear to move at all... the "stroke" appears and disappears exactly as it is suppose to
However, when I run it in a window that is 1024x768, the _h image appears to "jump" one pixel up.
I have encountered many other similiar things that only occure when the stage is scaled. There is a spot in the app where I am animating a bitmap by manipulating it's scrollrect x and width (have it's do a wipe in from right to left like a peice of paper unrolling on a table) and due to the scaling, the right edge of the image jumps left and right 1 pixel... but on 960x640 screens, it looks perfect.
Does anyone know how I can compensate for this effect so that this jumping doesn't occur when the stage is stretched to fit the window it's running in?

Sounds like a x-browser rendering problem
my guess would be to scale down the inner div's so they add up to less than 100%.
If you floated div's and gave them a %, give one of the div's a smaller.
ie: 2 divs floated in a Header, give one 50% and the other 49.5%

Using display from touch smart with fried motherboard.

I have a 520-1055 touchsmart that croaked because of motherboard problem.
does anyone know if there Is any way to hookup the display to use it as an additional display for another touchsmart or any other computer for that matter. I already removed the HD and the RAM so I am just trying to salvage what I can before recycling it.
I would appreciate any suggestions anyone has.
THKS.
This question was solved.
View Solution.

Hello @oldguy64,
I understand that you are looking to use your HP TouchSmart 520 All-In-One Desktop PC with a fried motherboard as a monitor for another computer. Unfortunately, you cannot do this. The HP TouchSmart 520 All-In-One Desktop PC is a computer with a monitor built-in which means the connections (except for the game-in HDMI port) all go through the computer to the monitor and not directly to the monitor. This means when you try to connect another computer you are connecting it to a fried motherboard and not the monitor.
I hope I have answered your question to your satisfaction. Thank you for posting on the HP Forums. Have a wonderful day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How to get video out on HP Touch Smart 600-1050

Hey i would like to see my computers screen on my hdtv but it doesnt seem that my computer has a vga out port. Is there any other way that i can get video out on this PC.

Hi,
Based on this, it does not have output port. On the left side it has HDMI & few others but it indicates does NOT for output.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Touch Smart Screen

I have a Photosmart Plus and the screen is now frozen! I tried the "on and off" and unplug it but neither works. Is there a fix? I'm on a Mac.

olagoke wrote:
Thank you very much the product label is
Hp pavilion touchsmart 14 Notebook Pc 14-n004sia and my Product No is E9N61EA#BH5.
Hi olagoke
Thanks for all information
Here is your product specs.
This is the Service manual of your model.
Your model's has display panel coming as a whole display assembly unit: 35.56 cm (14.0 inch), high definition (HD), WLED, SVA BrightView TouchSmart slim display assembly for use with HP Pavilion TouchSmart Notebooks.
Go through Page 3, 19, 88, 89, 90 of Service manual.
Following are the HP Spare Part number (differs with the colour of Display back cover) --
Aluminum with midnight black: 734414-001
Flyer red: 734410-001
Goji berry: 736814-001
Hazel berry: 736815-001
Mineral black: 736813-001
Pearl white: 734409 -001
Raspberry: 736816-001
Regal purple: 734412-001
Revolutionary blue: 734411-001
Silver: 734413-001
From the specs given in this Product guide, I assume the product color is Mineral black.
Here are some online sellers selling the display assembly unit with HP Spare Part number 736813-001, you may go though it to have an estimate of cost. I think it can come around $200,:
Amazon
Amazon UK
Hope this helps to resolve your concern & go ahead with the replacement,
thanks,
***CLICK "ACCEPT AS SOLUTION" TO HELP OTHERS WITH THE SAME PROBLEM***
***CLICK KUDOS IF YOU APPRECIATE MY REPLY***
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Touch smart screen blank

I moved and am just now trying to set up my printer(that worked perfectly fine before and wasnt damaged in the move).. And well it makes noises like its on but the power light is off and the "touchsmart" screen is black... I cant set up the wireless network without the screen..

chstr522
Welcome to the HP Community Forum.
You might check and see if you can reset the power on your printer.
Photosmart Plus Printer > Select your printer from the results list >
On the Printer's Support Page > Select Troubleshooting >
in the Troubleshooting drop-down menu >> Scroll down and Select Power >
Check / Look for / Select Document named / similar to
The HP Printer Does Not Turn On or Respond When the Power Button is Pressed
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

HP Touch Smart

I want to Edit a small Video I took with my camera. I am using Windows 7 with Microsoft 10. Anyway the Video is in a file folder: Libraries, Videos. I open up the touch Smart and then open the videos. There are some Videos already in the files there, they went there automatically as I did not put them there. The video I want is not there, I do not know how to pull the Video I want to edit into the Touch Smart application. I have tried search, but it is not found. How do I get the Video into Touch Smart? The Video usually opens from its file folder with Window Media Player.

Hello HPtouch,
There are many different models of the HP Touch Smart, knowing what specific model you have may be beneficial to supporting you with this issue.
Are you able to enter into safe mode?
Keep hitting F8 after you power on until the Safe Mode screen shows up.
If it boots up try to do a system restore to before you installed the updates.
Are you able to enter into recovery mode?
Keep hitting F11 after you power on until the Recovery window opens.
If you are able to get into recovery mode you can attempt to recover the system back to it's original defaults. However, this should act as a last resort if safe mode doesn't work.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

How to adjust the brightness of a second display connected to iMAC 2012 by Apple Mini DisplayPort to Dual-Link DVI Adapter?

How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

Macs control computer by USB. With a non-Apple display, you will have to use the brightness control on the display.

How to use the second display for installation OS in my vertical lines iMac

My 17" iMac display is full of vertical lines, it is unuseable. Does anyone know how to use the second display for Mac OS X or disable the first display for installation Mac OS x ?

Go to: *System Preferences > Displays* and select the Arrangement tab, then relocate your Menu bar by dragging it to the other display.
Unfortunately there is no Hardware or Software switch to turn off the iMac's Internal Display.

How to adjust Horizontal/Vertical display of Touch Smart screen

Similar Messages

Maybe you are looking for