How to adjust in call volume

when i use my phone and make a call the person that im talking to sounds muffled. how do i adjust?

Unfortunately they did away with this feature in Lion. Hard to understand why.
You can with something like AudioHijackPro manage your System sound to a much higher degree. A very versatile piece of software.

Similar Messages

How do i increase call volume

I just got my IPhone 4S and cannot locate where to turn up the call volume, not the ringer volume, but actually increasing the loudness of the caller?

Hi Folks,
have had my iPhone 4 for the last week. I'm quite tired of people telling me to turn up the volume...it IS all the way up both using the buttons on the side and the slider...the picture tells me it is at max...I'm not deaf (yet) and the phone is CONSIDERABLY quieter than my Palm Pre. There is no plastic film over the earpiece. I have had six people in the last week say "yeah, that's the only drawback of an iPhone...but you'll get used to it." I'm not sure I'll get used to it. With so many skilled programmers out there, you would think with so many questions all over the web, we'd have an answer by now. I will pay the first person to send me a link to an app that actually increases the volume (amplifys the current in-call volume) to the volume of at least the Pre (not that great a phone or difficult a task...lots of music boosters out there, must be a way to boost the volume of the call), not using a head set, not using bluetooth, not using speakerphone: $50.00USD. No joke, this is really aggravating me!!! APPLE, PLEASE SOLVE THIS!!!
Ratch

How to adjust the sound volume in small increments in Mac OS 10.7 (Lion)?

I use a Macbook that has dedicated sound volume buttons (F11 and F12).
In Mac OS 10.6 I was able to adjust the sound volume in smaller increments (1/4th of a square) by pressing SHIFT + OPTION + VOLUME UP/DOWN.
This stopped working after the update to 10.7. Any ideas?

Unfortunately they did away with this feature in Lion. Hard to understand why.
You can with something like AudioHijackPro manage your System sound to a much higher degree. A very versatile piece of software.

HT3302 How to fix low call volum

Call volume very low

Hi Fantasiadunlap,
If you are having receiver or call volume issues with your iPhone, you may find the following article helpful:
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/ts5196
Regards,
- Brenden

How to adjust bluetooth headset volume in mediapla...

Hi,
I've a problem with lovely E75. I just got a new bluetooth headset (HBH-IS800 SonyEricsson) without any volume control. In a normal call the volume adjust works perfect, but in the mediaplayer the volume is to loud even if I press the lower buttom to it says 10% in the display.
I also have the same problem with systemsounds (lika SMS) that plays in the BT headset, they are to load.
Is it possible to change the output volume from this media applications? I cant find any help in the manual or menusystems.
Rgds
Olof
Headset:
http://www.sonyericsson.com/cws/products/accessories/overview/hbh-is800?lc=sv&cc=se

I beg to differ. If SE implements the basic BT protocol set and Nokia will recognize this, and connects, then Nokia's work is done. Nokia is not required to support SE headset but is required to support the BT standards. The idea is to get you to purchase an SE phone over a Nokia phone and vise versa. To not understand this is to miss out on the basics of business fundamentals.
While it may be a great headset, personally I like the fact that I can use my much better headphones (Shure SE 530's) with the Nokia BH-214. I had the SE HBH-DS220 but got rid of it because it too had a very strange BT protocol that would not allow it to connect until music was streaming from the phone. The guys at the SE shop acknowledged this as normal behavior between manufacturers. If you do not believe this, go to and SE shop, or Nokia, or both and ask them to explain it to you.
Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
Apple iPhone 5,
Retina MacBook Pro, iPad Mini, Nikon D4

Nokia 2680 - How to adjust message tone volume?

How do I adjust my message tone volume in the Nokia 2680? All I see is the ringing tone volume.

the standard alarms cant be changed volume wise you nrrd to select louder tone here is link for good loud one
http://mosh.nokia.com/content/531DDB2B1F444F31E040050A45300E79
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

How to adjust FaceTime speaker volume?

When making Facetime calls, it's too loud and I can't lower the volume, neither the volume buttons nor the volume slider in control center work.

Look at your applications/utilities/ Audio MIDI setup.app and see if this helps.
Audio Hijack Pro.app will capture your system audio for a lot more control

How to adjust indivudual track volumes temporally

This is probably an easy one, but I have no idea how to change the volume of individual tracks temporally. It's really easy in imovie, but as far as I can tell, you can only edit the master track temporally in garage band.
Please tell me I'm wrong!
Thanks
Andrew

no volume change is permanent, use the track fader, you can always change it back again, but if you mean with a volume curve, search GB's help for "curve"
Thanks, but the help section doesn't say how to add a pan curve; it just says what it does.
{quote}You can change the volume of a track or project over time using a volume curve. You can add a volume curve to any track, including the master track.
After you add a volume curve to a track, you add control points to the curve at the points in the timeline where you want the curve to move to a new value. The curve changes evenly between the previous and next value, raising or lowering the volume level between the two points.{quote}

How to adjust volume of Airport Express speakers on Apple TV?

Hello,
I've just setup my Apple TV (bought in November 2012).
The latest version of the firmware allows to select AirPort Express speakers as default audio output. This is great.
While watching Youtube videos or listening iTunes music, I can't find how to adjust the output volume.
I am forced to set it by using the speaker remote control which is quite frustrating.
Any clues?
I've attached a photo of the Apple TV screen while playing a Youtube video. There's an output selector. But I can't access the volume options.
Thanks a lot!

Hit "up" two times to bring up "movie menu", then hold down "select", then navigate up and over to "speakers" tab, then down to your "AirPlay speakers", then move slider to right to increase volume
DONE!!
found it here so i dont deserve the credit but you guys should know - i struggled with this for hours wondering why the streamed audio was so low
https://discussions.apple.com/thread/2600145?start=120&tstart=0

How to adjust volume on Audio Timelines

A couple questions about volume adjustment on the various Audio Timelines on Premiere Pro CS 5.
1) How to adjust volume level of an mp3 on the Audio 2 timeline?
2) How to adjust or mute volume of an 'individual' video clip on the Video 1 and Audio 1 timeline? (I have many clips on the timeline and know how to mute them all, but in this case, I'm looking to only mute certain clips in the timeline.)

Along with the material covered in the Help File, that Ann linked to, see this ARTICLE. It goes into a little more detail on the differences between Clip Keyframes and Track Keyframes (generated with Audio Mixer). While the effect of those can be the same, there are nuances, that one should make note of.
Good luck,
Hunt

How do I increase voice volume on calls

Can anyone tell me how to increase the caller volume please?

If this is a new phone, make sure that you have removed the shipping plastic off the face of the phone.
To increase the volume, use the toggle switch on the side of the phone.

How to adjust volume iPhone 4 for conversations?

How do I adjust volume on iPhone for conversations?

If you don't know how to adjust the iPhone volume, you REALLY need to read the iPhone User Guide:
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

How i can increase the volume when i playing a video? dont showing the volume control in the player..

how i can increase the volume when i playing a video? dont showing the volume control in the video player..

Are you sure you increased the caller volume? This is only adjustable while in conversation. So, while you are calling you'll see a few icons on your screen and one of them is to adjust your caller volume.

BUG: Call Volume - Z2 & S90

Lenov Z2 (not Pro) and Lenovo S90 are suffering from a Call Volume bug of the receiver. Several users have reported here (but also people I know personally) that the Call Volume for these units is too low compared to other phones, in particular for the Lenovo Z2 phones.
It is barely manageable to hear the other side in a quiet environment like in your home, but while outside of your home (e.g. street or a shop), you can not hear the caller properly. If they speak quietly, you can't even hear them properly at home. This problem seems more pronounced for the Lenovo Z2 than Lenovo S90.
I had this issue on two phones already (Lenovo Z2 and Lenovo S90) and other users reported this problem also for Lenovo Z2, here is a screen shot from this post:
Strangely, the Call Volume of the receiver on Skype is of sufficient quality for me. So that is quite strange that the call volume for the calls is too low. Thus, I hope this is only a software issue and you can set the volume higher for calls?
Finally, let me also restate that this issue was posted to this forum a few times, so I hope that someone from Lenovo could finally address it. I list a few posts that describe this problem:
Post 1: link
Post 2: link
Post 3: link
In my view a quarter of extra volume would be good. Most of the volume settings are at 50% (e.g. ring tone) but call volume always needs to be at 100% and even that is sometimes not enough. Could you add it up in an update? Or put an option to boost call volume by e.g. 25% in accessibly settings?
P.S. Also one thing that I noticed is that Security App is doing something during the calls that I don't know what that is and how to stop it, it is called Anti-tapping and I am not sure if that can interfere with the call quality or not. I would be quite interested to know what the Anti-tapping does?

Thanks, wangwei. Here is a new idea that could lead to a new cheap feature. Depending on your tests, you could either adjust the call volume as it is. Or you could put a new feature in settings to increase (adjust) the call volume. I.e. by clicking a new toggle switch the user could increase his call volume if he desires to or leave it as it is.
This could be a nice feature that several users could welcome - for example those who are using the phone in loud environments (e.g. factory managers, people working in a bar, commuters) or those who have who have a preference for louder call volume in general (which seems to be my case and a few others who wrote on this forum).
As of yet ,no other mainstream phone seems to have a feature to max call volume for users who want to max it, or leave it on stadarnd level for those who want it as it is. This new feature could go for example in "Audito Profiles", or in "Settings > Features" or in "Dialer > Options > More features and settings"
Finally, strangely, your new Lenovo P70-A has amazing call quality and different call-volume software than S90 and Z2. Thus you could also test S90-A & Z2 versus your own Lenovo P70-A, which I found to have excellent call quality overall comparable to Meizu MX4 in sound and clarity. Not sure why it has a different firmware for call volume.
P.S. Lenovo P70 is currently the best selling phone in Slovakia, selling better than Iphone or any other phone on the market during this month. Congratulations to your teams who created this phone. The only downside of P70-A seems to be the weak performance of the selfie camera despite the 5MP (can PM my selfie test results if interested).

Adjusting brightnesss and volume without pressing FN

hi all
i would to find out how to adjust brightness and volume of my powerbook g4 15" 1.5ghz, without pressing FN
currently, to adjust, i hold "fn" and press F1/2 for brightness and f3(mute), f4/5 for volume.
my friends with macbook pro or ibook g4 can just press the f1 to f5 button to adjust the brightness and volume.
is there someway to change this?

Hi, Jeffrey.
See "Mac OS X: Portables - Using Function keys with Exposé, applications, games."
It sounds like at some point in the past you selected Use the F1-F12 keys to control software features in the System Preferences > Keyboard & Mouse > Keyboard tab. Selecting that option permits the F-keys to execute their programmatic function without pressing fn, but requires you press fn to execute the corresponding hardware-related function assigned to that key.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

How to adjust in call volume

Similar Messages

Maybe you are looking for