How to adjust indivudual track volumes temporally

This is probably an easy one, but I have no idea how to change the volume of individual tracks temporally. It's really easy in imovie, but as far as I can tell, you can only edit the master track temporally in garage band.
Please tell me I'm wrong!
Thanks
Andrew

no volume change is permanent, use the track fader, you can always change it back again, but if you mean with a volume curve, search GB's help for "curve"
Thanks, but the help section doesn't say how to add a pan curve; it just says what it does.
{quote}You can change the volume of a track or project over time using a volume curve. You can add a volume curve to any track, including the master track.
After you add a volume curve to a track, you add control points to the curve at the points in the timeline where you want the curve to move to a new value. The curve changes evenly between the previous and next value, raising or lowering the volume level between the two points.{quote}

Similar Messages

  • How to adjust maximum track length?

    I'm working in GarageBand 3.0.5, and I'm using one track to record from an external microphone. I have no problem recording and getting the sound to play back, but it seems that I've run into a point where it is no longer possible to extend the track time. It has stopped at 1:06:08 and won't let me record any more, even after saving.
    Does anyone know how to adjust the maximum length of a track?
    I have tried going into GarageBand preferences, under the Audio MIDI tab and changing the buffer size from small to large, but that did not make any difference. I can not think of anything else to change. Any help that anyone could provide would be greatly appreciated.

    http://www.bulletsandbones.com/GB/FAQPages/RecordLength.html

  • How to adjust the sound volume in small increments in Mac OS 10.7 (Lion)?

    I use a Macbook that has dedicated sound volume buttons (F11 and F12).
    In Mac OS 10.6 I was able to adjust the sound volume in smaller increments (1/4th of a square) by pressing SHIFT + OPTION + VOLUME UP/DOWN.
    This stopped working after the update to 10.7. Any ideas?

    Unfortunately they did away with this feature in Lion.  Hard to understand why.
    You can with something like AudioHijackPro manage your System sound to a much higher degree. A very versatile piece of software.

  • Nokia 2680 - How to adjust message tone volume?

    How do I adjust my message tone volume in the Nokia 2680? All I see is the ringing tone volume.

    the standard alarms cant be changed volume wise you nrrd to select louder tone here is link for good loud one
    http://mosh.nokia.com/content/531DDB2B1F444F31E040​050A45300E79
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

  • How to adjust bluetooth headset volume in mediapla...

    Hi,
    I've a problem with lovely E75. I just got a new bluetooth headset (HBH-IS800 SonyEricsson) without any volume control. In a normal call the volume adjust works perfect, but in the mediaplayer the volume is to loud even if I press the lower buttom to it says 10% in the display.
    I also have the same problem with systemsounds (lika SMS) that plays in the BT headset, they are to load.
    Is it possible to change the output volume from this media applications? I cant find any help in the manual or menusystems.
    Rgds
    Olof
    Headset:
    http://www.sonyericsson.com/cws/products/accessories/overview/hbh-is800?lc=sv&cc=se

    I beg to differ. If SE implements the basic BT protocol set and Nokia will recognize this, and connects, then Nokia's work is done. Nokia is not required to support SE headset but is required to support the BT standards. The idea is to get you to purchase an SE phone over a Nokia phone and vise versa. To not understand this is to miss out on the basics of business fundamentals. 
    While it may be a great headset, personally I like the fact that I can use my much better headphones (Shure SE 530's) with the Nokia BH-214. I had the SE HBH-DS220 but got rid of it because it too had a very strange BT protocol that would not allow it to connect until music was streaming from the phone. The guys at the SE shop acknowledged this as normal behavior between manufacturers. If you do not believe this, go to and SE shop, or Nokia, or both and ask them to explain it to you.
    Show the KUDOS button some love.... Hit that bad boy.... It don't hurt....
    Apple iPhone 5,
    Retina MacBook Pro, iPad Mini, Nikon D4

  • How to adjust in call volume

    when i use my phone and make a call the person that im talking to sounds muffled. how do i adjust?

    Unfortunately they did away with this feature in Lion.  Hard to understand why.
    You can with something like AudioHijackPro manage your System sound to a much higher degree. A very versatile piece of software.

  • How to adjust FaceTime speaker volume?

    When making Facetime calls, it's too loud and I can't lower the volume, neither the volume buttons nor the volume slider in control center work.

    Look at your applications/utilities/  Audio MIDI setup.app and see if this helps.
    Audio Hijack Pro.app will capture your system audio for a lot more control

  • How to adjust volume on Audio Timelines

    A couple questions about volume adjustment on the various Audio Timelines on Premiere Pro CS 5.
    1) How to adjust volume level of an mp3 on the Audio 2 timeline?
    2) How to adjust or mute volume of an 'individual' video clip on the Video 1 and Audio 1 timeline? (I have many clips on the timeline and know how to mute them all, but in this case, I'm looking to only mute certain clips in the timeline.)

    Along with the material covered in the Help File, that Ann linked to, see this ARTICLE. It goes into a little more detail on the differences between Clip Keyframes and Track Keyframes (generated with Audio Mixer). While the effect of those can be the same, there are nuances, that one should make note of.
    Good luck,
    Hunt

  • How to adjust volume of Airport Express speakers on Apple TV?

    Hello,
    I've just setup my Apple TV (bought in November 2012).
    The latest version of the firmware allows to select AirPort Express speakers as default audio output. This is great.
    While watching Youtube videos or listening iTunes music, I can't find how to adjust the output volume.
    I am forced to set it by using the speaker remote control which is quite frustrating.
    Any clues?
    I've attached a photo of the Apple TV screen while playing a Youtube video. There's an output selector. But I can't access the volume options.
    Thanks a lot!

    Hit "up" two times to bring up "movie menu", then hold down "select", then navigate up and over to "speakers" tab, then down to your "AirPlay speakers", then move slider to right to increase volume
    DONE!!
    found it here so i dont deserve the credit but you guys should know - i struggled with this for hours wondering why the streamed audio was so low
    https://discussions.apple.com/thread/2600145?start=120&tstart=0

  • How to adjust volume iPhone 4 for conversations?

    How do I adjust volume on iPhone for conversations?

    If you don't know how to adjust the iPhone volume, you REALLY need to read the iPhone User Guide:
    http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf

  • Adjusting brightnesss and volume without pressing FN

    hi all
    i would to find out how to adjust brightness and volume of my powerbook g4 15" 1.5ghz, without pressing FN
    currently, to adjust, i hold "fn" and press F1/2 for brightness and f3(mute), f4/5 for volume.
    my friends with macbook pro or ibook g4 can just press the f1 to f5 button to adjust the brightness and volume.
    is there someway to change this?

    Hi, Jeffrey.
    See "Mac OS X: Portables - Using Function keys with Exposé, applications, games."
    It sounds like at some point in the past you selected Use the F1-F12 keys to control software features in the System Preferences > Keyboard & Mouse > Keyboard tab. Selecting that option permits the F-keys to execute their programmatic function without pressing fn, but requires you press fn to execute the corresponding hardware-related function assigned to that key.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • How to adjust volume within a single track?

    I have recently purchased Logic Express 9 as I moved from a PC to MAC.If i record a single track, such as vocals, is there any way I can adjust the volume level at different places on that single track? I was able to do this very easily in Acid Pro. All I see in Logic is the ability to increase or decrease the track volume as a whole. Thanks!

    To add to the tips… Make your right tool the marquee tool in Logic. Now when you are in the vocal track and in automation mode, hold Command and you'll get the Marquee tool. Drag a box around the phrase you want to adjust, release command (returning to the pointer) and click on the selection. Now you'll have 4 nodes or handles. Drag the automation line up and down to taste. I manually "compress" all my vocal tracks with an automation pass using this trick.

  • How can I lock a track volume level to never move in Garageband?

    Hi there
    I'm currently creating a backing track of a popular song and I have built up all the parts of the songs against a wav track which contains the original version of the song.
    I want to be able to mix the volumes of the tracks Ive built to the main proper recording, but I need to be able to LOCK the actual wav song track at say the 1.7db mark. Is this possible?
    As I cant do it now, I keep accidently adjusting the volume level of the actual wav song track, so then all my volume mixes on other tracks are rendered useless (As you cant UNDO a volume change back to how it was)
    Even if I engage the padlock "lock" button on the actual wav song track I can still move the volume of that track up and down. So its not 100% locked in my opinion.
    Any ideas?
    Thanks

    Hi
    Do you mean:-
    Select the track
    Click Down Arrow
    Make sure Track Volume is selected
    Click on the dot that has been created at the start of the track (to check its number level)
    Click on the line now showing at the very end of the song and make sure the NEW dot you've just created is at the same number level as the one at the start.
    As this seems to work.
    If I dont put any dots on it, you can move it as you please still.

  • How do I boost the volume of a track, and a section within the track?

    Thanks for any help.
    I'm fairly new to logic and I'm trying to figure out how to boost the volume of a track. I know how to adjust it in the mix, but I have some imported audio files that still aren't loud enough overall. Is there a way to "boost" the volume of the track, so that it adds dB levels to the track overall? Not just turning the level of the track up, but actually boosting the volume of what's in the track? I turn it all the way up to 6.0, and it still isn't loud enough... I'd rather not have to double the track.
    Also, is there a way to boost the volume of certain sections of the track, besides using automation?
    Any help is greatly appreciated!!
    Chris

    First, welcome to the Apple Discussion Forums!
    Try this. Double click on the track and the Sample Editor will come up. Select the section you want to boost and select Functions -> Change Gain. But keep in mind, boosting the signal will also boost the noise.
    Hope this helps.

  • How to adjust the height of the tracks in timeline mode

    I am trying to find my way around PE 10, have had the program for years but not used it. (I am using Win 7 on a 15" laptop, screen resolution is 1920x1080, 16 GB Ram, 4GB video RAM.) I took some video on vacation, in some clips there is a lot of wind noise. I know how to adjust the volume using key frames, but the tracks are only about ¼" wide making adjustment just about impossible. Full volume to zero is just a small fraction of an inch. I can zoom in on the track, but this doesn't make the track wider. Is there any way to do this?
    Thanks,
    David

    Actually, I wanted to do this in a static table.
    Just now, I learnt that this feature is not available in 12.0 as well as in other previous versions.
    However, this will be implemented in Release 12.1.
    Thanks,
    Navin.

Maybe you are looking for