How to adjust logical system after coping PRD to QAS in tabels

Hello
I wonder how to adjust logical system after coping PRD to QAS in tabels. I know (the logical system changes) but there is a transaction which adjustes entries in tabeles...

>
Tina Tajnist wrote:
>...but there is a transaction which adjustes entries in tabeles...
SE14

Similar Messages

Hi how to create logical systems.

Hi,
how to create logical systems. Do we need to create logical system name for creating RFC destinations? plz help me out.
thanks
dhanush.

Hi,
transaction:
SALE -> Basic Settings -> Logical Systems -> Define Logical System
No, you don't need to create Logical Systems to define RFC destinations.
Regards,
Jakub

How to create logical system

Hi,
How to create logical system.
Please help me with the steps for logical system creation in R3 system.
Thanks,
Kelly

Hi,
First make your client modifiable, then follow the below procedure.
Go to transaction SALE or BD54 -> Sending and Receiving Systems -> Logical Systems -> You'll see "Define Logical System" and "Assign Client to Logical System".
For more information use below link.
http://help.sap.com/saphelp_nw70/helpdata/en/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm
Thanks,
Mano

System copy from PRD to QAS based ABAP system EHP4.

Hi guys,
I have to perform homogenous system copy from PRD to QAS.
My PRD is ECC6.0 EHP4 release 701 sp 103( SAP_basis) with oracle ver 10.2.0.4.0.
Is there any specific procedure for EHP4 or i can follow the below mentioned guide.
https://websmp204.sap-ag.de/~sapidb/011000358700000514722009E.pdf.
What pre-requisite i need to take care before doing the system copy?
Regards
Abhishek

Hi,
All pre-requisite is there in system copy guide.Apart from that take user master backup of quality system and after system copy, import the user master data back so that you have same users in quality system.
Also, take RFC's backup also.
Thanks
Sunny

How to determine logical system in a routine

Hello everybody,
I want to extract data from a ODS-Object (let's say A) to the other ODS-Object (B).
The A-ODS includes data from different R/3-source-system, where I want to select the data from one R/3-source system into B-ODS. Normally I can use the InfoObject 0LOGSYS (which exist as a key-field in A-ODS) with a constant string ofR/3-source system. But the Problem I we have when tranposting to different BW-System.
My question is: how can I determin the BW-System (logical system in a routine, where I can program the coding more flexible? Is there a field for source system similar to sy-datum or is there a function module ?
Thanks so much in advance!
Van Anh

Welcome to SDN
Check the table RSOSFIELDMAP
Assign points if useful
Regards
N Ganesh

How does the Logical System GUID get created

In R3 table CRMPRLS has a logical GUID for its logical system name. How does this get created/updated? Is it created during the initial replication of the data between R3 and CRM? Why I am wondering is my systems where working ok in my QA environment then something happen to change LSGUID in my CRMPRLS table on R3. So now my middleware is not working. I will use notes 588701 and 765018 to fix the problem, but I am trying figure out what caused it before it happens again in my production environment.
We are doing one thing to mention is that our R3 environment is being setup to talk to 2 different CRMs. I am wondering if the setup of the second CRM caused the guid to change. If so what step during the middleware setup of CRM would cause that?
Thanks.
Matthew

HI Matthew,
We are facing a similar issue. Could you please let us know the activities done to get the issue resolved?
Did you revert back the changes done as suggested in the Note 588701, if yes can you let me know where the changes has been done and how has it is reverted back?
Also, in the table CRMPRLS in R/3 we do not see an entry for the external SRM system.
Please note, for replicating material into SRM we use the CRM Middleware.
BR// 420

How to change logical system name

hi,
there is no logical system name for business system in sld on integration tab.
this bus sys is based on tech sys which is configured as integration server.
plz tell me how to give the logical sys name there.
plz reply me it is urgent.
vijender

Jochen Gugel wrote:
> Hi @ll;
>
> at the tab in technical system the logical system name was correct.
> But it wasn´t shown at the integration tab of the business system.
> I solved this problem by deselecting the integration server, save this settings and reselect it afterwards.
>
> Kind regards
> Jochen
hello all,
I'm actually having the same issue. This issue is NOT the popular adapter-specific identifier problem where the business system in the ID needs to be compared with the SLD. This issue is that the within the SLD on PI 7.0 the Logical System Name of a given business system is not present although the logical system name of the specified technical system does appear. You cannot change the LSN of the business system since it relies completely on the LSN of the associated technical system.
I used Jochen's approach before and it worked, but i've tried this again since i'm having the same issue. Only now it doesn't work.
i solved this issue by deleting the old BS and recreating it
Thanks,
Edited by: Jason Ray on Jun 24, 2008 5:47 PM

How to Assign Logical System to a Client in SALE Transaction

Hi ABAP/EDI Specialists,
1How to Assign Logical System to a Client. In the SALE transaction window.
I didn't see any Receiving and Sending Systems(Tree). But I can see Logical Systems. In the Definition and Assign Subtree are there. I created two Logical Systems STUD_S and STUD_R. When I executed Assign Logical Systems. I got a window, Where I can see a list of Clients. I got confused, how to Assign those Two Logical Systems to Client 800 and 810. Finally I double Clicked on each client and in the next window. I changed the Logical System to STUD_S for Client 800 and Logical System STUD_R for client 810. and saved them.
Is this procedure correct???
Why I need this is, While generating partner profiles in ALE Model (BD64), I am getting no list at all. When I executed I got no list.
"No messages have been defined for the selection conditions in the Model"
I got struck at this point.
Please help me to come out of it.
Thanks,
Chinna

Hi Chinna,
Thanks for such a valuable information. I am able to move further. But i got struck while generating parntner profiles from ALE distribution model.
Log For Partner Profile Generation:
Partner:
Partner ZVK_SS_800 as partner has been Created ( Sending System)
Partner ZVK_SS_820 as partner has been Created (Receiving System)
Port:
Port Cloud not be Created
RFC destination ZVK_SS_820 not specified for system ZVK_SS_820
Enter the RFC destination and Restart the generation
It is not recognizing the RFC port, even though i followed all the steps correctly.
While creating RFC destination, can someone tell me How to fix the above error and what is the Client No, Username and Pasword i have to give.
Thanks
Chinna
Edited by: Chinna on Jun 6, 2008 7:43 PM

How to chage logical system name SYSTEM ECC6.0

Dear Experts,
We need one help, in one of our production client which is on ecc6.0 and on oracle. in that when we are executing transaction rsa1. its giving error " logical system name has been change for this system ",
then later on we have found that the logical system name in table T000 has been changed , so now we need revert back orignal name, so we require your help to do proper step to revert back the name, also we requre what other things we need to change with respect to logical system name...
Need your help on this issue we request your immediate support for this.
Regards
Yogesh

Hi Yogesh,
Hi Anil,
1) Logical System Name can be changed using SALE transaction. Go to ALE -> Sending and Receiving System -> Logical Systems -> Define Logical Systems.
2) After changing Logical systems you have to check partner Profile using WE20 and do the necessary modifications. if required
Hope this solves your issue.
Regards,
Karthik

How configure a Logical System (XI) as receiver for an Outbound Idoc?

Hi all,
How can I configure a Logical System (XI) as receiver for an Outbound Idoc?
Points will be given,
Regards,
Daniela

hi,
it all depends on what kind of document you need to send to XI
if you want to send some logistic documents (like orders, deliveries etc)
have a look at my book - where you will find step by step guides
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi"><b>Mastering IDoc Business Scenarios with SAP XI</b></a>
then you will undestand where to change to get it send via LS
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>

Creating and Assigning logical system after executng RSA1 transaction

Hello guys, i am stuck since many days for running the transaction RSA1 for BW but message comes you can work only in client 001 only. when i try to log in with bcuser i cannot but i am able to log in with DDIC user but it says there is no logcal system assigned. I tryied to create a new logical system but it says user ddic may not change objects something like that. please help in this case that how i can be able to use bw in NW04s trial. i created a user in the client 001 but this user fails to create logical system and mssage states that you do not have authorization to do this actine. i hope i will get the answer very soon. Hafiz Anis

For BI7.0(sap netweaver 2004s) help docs pls check the below links
Check these links:
http://help.sap.com/saphelp_nw2004s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
NW2004s help:
http://help.sap.com/saphelp_nw2004s/helpdata/en/index.htm -> SELECT key capability
http://help.sap.com/saphelp_nw2004s/helpdata/en/30/c4461ff69d5a438f1286e344b545fa/frameset.htm then select
-> information integration -> business intelligence.
For Modeling in Netweaver BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
To know the New Features in BI:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/4487dd91-0b01-0010-eba1-bcd64196ec6b
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/910aa7a7-0b01-0010-97a5-f28be23697d3
Also check these links as well:
https://www.sdn.sap.com/irj/sdn/developerareas/bi?rid=/webcontent/uuid/e78a5148-0701-0010-7da9-a6c721c6112e
BI Data Modeling and Frontend Design
For Netweaver Security & Authorizations:
http://help.sap.com/saphelp_nw2004s/helpdata/en/8c/2ec59131d7f84ea514a67d628925a9/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/39f29890-0201-0010-1197-f0ed3a0d279f
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/fda2a990-0201-0010-5497-b81b1556df24
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/adeac294-0501-0010-5a97-9ac5d562b1be
Also check for documents in SDN .You can find the screen shots,Demonstrations and lot of documents:
https://www.sdn.sap.com/irj/sdn/developerareas/bi
Hope it helps

EBP Logical system after client copy

Hi Friends,
We did a client copy for our EBP system from the production system.
Now when I access the system to create invoice, the below error
prompted.
Error message
Error calling META BAPI META_CALCULATE_TAX
Error occurred calling META_BAPI_DISPATCH
In the debug mode for F/M META_BAPI_DISPATCH , I could see the logical system
still pointing to the live system.
So far Basis already changed all the logical system entries.
Hope someone could give some hint to solve the problem
Many thanks
Mike

Dinesh,
We are using SRM Standalone. No sync with backend product categories. In the debug mode I could see the system getting the logical system = "production sys" for business object BUS2205 (invoice).
Belief there is some setting for logical system still need tobe changed.
Hope you could give some hint.
Many thanks.
Mike.

How to create Logical System for ALE?

Hi All,
I'm an abaper and want to create Logical System For ALE. When i tried to make it using Tcode: SALE, msg appears that "Caution: The table is cross-client", when clik on continue button it shows "You are not allowed to change cross-client customizing". Help with proper documentation.
Thanks in Advance.

Hi,
what you did is correct but you don't have the authorization for cross-clients in your sever.First take the authorization for cross-clients then follw the steps
Here i am giving link go through that and do practice,
http://www.****************/Tutorials/ALE/MaterialMaster/Distribute1.htm
http://www.****************/Tutorials/ALE/ALEMainPage.htm
Reward if it useful
lakshmi.

How to check logical systems

Hi Experts,
What is the best way to check what are the logical systems connected to ECC and what are the logical systems connected to APO?
Regards
Manotosh

Hi
You can check the connections with TCode: RSA1 (datawarehouse workbench). Go to section Source system & see the systems connected to APO.
As adviced by Vinod, You can check CIF connections between APO & ECC systems in /SAPAPO/CC.
In R/3 you can check the connected system by Tcode: SM59 & you can see the connection to APO in /SAPAPO/CC.
Hope this helps.
Regards,
Nawanit

How to get logical system

Hi Experts,
Generally while creating third party BS in SLD, we give logical system name and for TS we give Host.
we have one JDBC receiver channel for which host is changed now. In Connection parameter we have given the new host.
so for that JDBC receiver Business System, i changed the Host in SLD and gave the new host but not getting from where I will get the logical system. The team which provided the host told that they have only created the new server. They have no idea on this.
Or I will use the old Host and LS. Old Host will not work I guess. incoming data coming through ABAP proxy to JDBC . but while debugging proxy program it is giving Business system error.
Please suggest what to do.
Waiting for a quick response.
Thanks,
Swapnashree

Previously I had only made changes in channel connection parameter. but it did not worked. When I checked the technical system, there old host is present. SO,I replace that with new host which is now maintained in connection parameter.
and when I checked the BS, in LS, the old instance of URL present.
For example:
connection parameter
jdbc:oracle:thin:@abcd123.abc.com:xxx:yyyyyy
abcd123 - host
xxx- port
yyyyyy - Logical system name ..
My query is shall I use this new Host only. I tested with new Host and LS combination and old Host and LS combination.. both did nt worked.

How to adjust logical system after coping PRD to QAS in tabels

Similar Messages

Maybe you are looking for