How to adjust monitor saturation

The color is extremely saturated on the monitor display of my MacBook Pro. I've tried adjusting the brightness/contrast in System Preferences, it does nothing. Help!!!

You can try going to system preferences, click the color tab, and click calibrate, click expert mode write down the settings you start at, and keep track as there are quite a few adjustments available. Click continue, follow the instructions, when you get to the"SELECT A TARGET GAMMA, un click native try moving the slider linear and standard. And see if this gives you what you are looking for.

Similar Messages

How to adjust external monitor brightness / contrast

I just recently bought a MacBook Pro, and I am trying to calibrate my Lacie photon20vision (not mark II) but cannot figure out how to adjust the brightness and contrast. The problem lies in that when using the DVI input on the monitor the on screen adjustments are not available. You are required to use software to adjust the levels when using the DVI on this monitor. In Windows I would just go into the driver properties and adjust and all was fine. On my mac I can choose resolution and err, that's it.

Hi
I am not too sure if I get to the Windows because screen is damaget so much you cannot see anything, but bo matter what I do external monitor is in power safe mode. And I know for sure the monitor is good - tried on different system and it works.
The whole idea is I do not need to use this laptop as portable device, I was planning to connect external monitor, keyboard and mouse and use it as office CPU.

How to adjust hot corners for duel monitors?

Anyone know how to adjust the hot corners so that I can use all 4 corners of my primary monitor and not my second?
Right now I have to move the cursor all the way across both monitors to the bottom right corner on my second monitor to activate it. In Lion I believe they had a duel monitor adjustment to fix this problem.
Any ideas in Mountain Lion?

Actually, on top of that, is there also a way to make the menu bar appear on both screens? Having a window in a different monitor from the menu bar is a bit inefficient.

How to adjust the brightness of an apple monitor from Windows 7?

how to adjust the brightness of an apple monitor from Windows 7?

In Windows 7 go to help display brightness or help power saving.

How to adjust the brightness of a second display connected to iMAC 2012 by Apple Mini DisplayPort to Dual-Link DVI Adapter?

How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

Macs control computer by USB. With a non-Apple display, you will have to use the brightness control on the display.

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

My 10 yr old wants to text from his iPod touch. We have 1 family Apple ID. How can I monitor his texts without receiving all of his friends messages? Do I need a separate Apple ID or can I link a new email address to the same Apple ID?

Just an email address
MacMost Now 653: Setting Up Multiple iOS Devices For Messages and FaceTime

How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

How can I monitor my monthly data usage for all 3 computers in my house? I have an Airport base station and it seems there should be software to monitor it from that point rather than monitoring the usage for each computer and then adding it up.

The following example was one of dozens that showed up on a simple Google search of.....
monitor Internet data use on a Mac
Watch your Internet usage with NetUse Monitor | Macworld
Most service providers have an application for their users as well.

How do i monitor all my website status hosted on IIS using web console

How do i monitor all my website status hosted on IIS using web console
I need to monitor all the website status if that is started or stopped on the server remotely something like
Website name Port #
Server name (website hosted on)
Status (Stopped/ Started)
Please help
Thanks in advance

This one may help.
http://gallery.technet.microsoft.com/scriptcenter/Powershell-Script-for-13a551b3
I'd ask them more over here.
http://forums.iis.net/
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

LR4.1 - Tone Curve - how to adjust individual RGB channels?

Hi,
I am having trouble figuring out how to adjust the curve of individual RGB channels. I am assuming the LR4 Tone Curve works like the PS Curves dialog with the channel dropdown.
The LR4.1 Help says:
To make adjustments to individual points on the tone curve, choose an option from the Point Curve menu, click the Edit Point Curve button , and do any of the following:
Choose an option from the Channel pop-up menu. You can edit all three channels at once, or choose to edit the Red, Green, or Blue channel individually.
When I click the little icon in the lower right corner of the Tone Curve panel, the panel shrinks so that I don't see the Regions sliders. If I click again, they are visible again. I can't find where to select one of the three indvidual channels.
The Help refers to "the Point Curve menu." Where is the Point Curve menu? Is the Point Curve different from the Tone Curve?
If I right-click (Windows) in the curve dialog, the context menu has a Show Info option. I click it on/off and don't see any change or any info. Where should I be looking for info?
Thanks for any help here.
John

Good morning John,
The point curve is the one without the sliders. The adjustments for the individual channels are only available with
PV2012. You must be editing a file with PV2010 or 2003. When in PV2012 you will see " Channels: RGB" below the curve window. Click on the doule triangles following the RGB
to pick the individual channel.
HTH
Rich

Digital audio input via mini jack/toslink from ADA, monitored via USB audio output... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

Digital audio input via mini jack/toslink from ADA converter, monitored via USB audio output to amplifier... is this do-able? I know digital audio input should be okay but how do I monitor it, apart from using the internal speakers?

You can output audio thru HDMI, with appropriate adapter.
You can use additional cheap external usb audio for monitoring.

How do I monitor audio while importing?

While importing from my cable TV, I Can see the incoming video but caan't hear the audio. I would be helpful if I could here the audio so I could go about my work and keep an ear on the feed. Then I would know when the feed is over without having to Constantly watch it. I suppose I could size the monitor windo real small and put it in the corner of my screen then rearrange all working windows arround it. But that's a pain...

How do I monitor audio while importing?
Use iMovie HD or Vidi to import files to your computer. Both allow audio monitoring. iMoveie '08 does not.

I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money? Does it have a line in and how do you monitor sound? Will I need adaptors and a interface?

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.

How to adjust the path of a tween using actionscript

I'm a novice at Actionscript3 and would greatly appreciate an answer to what seems like a simple question:
Here's my project:
http://home.comcast.net/~samiri/director/mortals/amadoFlashPortrait/index.htm
Click on the gray scale frame images. A larger version of that image tweens out along the z axis. However it comes from 'somewhere else' not from 'within the frame.' How do I get the each larger gray scale frame image to look like it comes directly from the place where the user clicks (not to one side or the other)?
So I guess what I'm asking is how to adjust the path of the tween along the x and y axis using the actionscript code (below).
My method:
I'm using this line of code in my script:
var myTween:Tween = new Tween(mdImg, "z", Strong.easeOut, 300, 0, 1, true);
"mdImg" is the variable that holds the name of the hotspot clicked upon by the user.
I have the larger (faded edge) image positioned directly on top of the frame image and just kept invisible until the User clicks on the hotspot over the frame image.
Thanks much.

Thanks moccamaximum,
By "do your tweens manually" you mean to use the timeline to do frame-based tweening? That is an option but I'm wondering (as a newbie): Isn't it better to use actionscript to do animation since you have more control and it's time based rather than frame-rate based (and works better on low performance machines)? Just curious if I should be spending the time to learn actionscript or do it in the traditional way.
Thanks

Datetime in log is greater than current date, how to adjust them

our env is jes8.1 and solaris 8, and the datetime of log in jes is 8 hours greater than current date in solaris, I want to know how to adjust datetime of log to current date?

Type
#date
at the prompt and check whether the log file date/time and the system date/time are the same. I guess the log file uses the system date/time. if tats the case then change the system date/time

How to adjust the size of a region?

Hello, would anyone know how to adjust the size of a region size?
Thanks for your replies!

Checkout an interesting article called " Oracle9iAS Portal Best Practices: Regions" to understand resizing region.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_REGIONS_0.HTML

How to adjust monitor saturation

Similar Messages

Maybe you are looking for