How to adjust Numbers so I can scroll all the way to EE or FG etc without having to press that button for every column
I need to make a sheet with about 150 columns, which is about up to ET but the only way i see to get there is by continually pressing the top right button to add one column at a time. This is very time consuming, how do I set up Numbers to show me 150 column, i.e. up to ET??
thanks in advance
This NI-DAQ function call directly accesses the nidaq32.dll. While the nidaq32.dll is multithread safe, it is not a multithreaded DLL. This is also described in the KnowledgeBase entry 1V9DSHDM: "Can NI-DAQ Handle Different Operations at the Same Time? Is It a Multi-threaded DLL?"
You are correct that the SCXI_Set_Gain function is not asynchronous. Thus, you do have to wait till that function returns before calling the next one. LabVIEW has found a way around this. So, you can actually use the LabVIEW functions to set the gain on these modules without having to wait as you do with SCXI_Set_Gain.
Regards,
Geneva L.
Applications Engineer
National Instruments
http://www.ni.com/ask
Similar Messages
-
How can I set the gain on a SCXI-1102 module without having my computer lock-up for 3 seconds?
Forgive my insolence, but did it never occur to anyone that spinning in a hard loop while polling a status register to set a gain for 3 seconds isn�t a great idea?
I have a number of SCXI-1102 modules to set the gains on, and it takes several seconds for each. Reading the documentation on the subject indicates that the SCXI_Set_Gain call polls a status register waiting for the gain to settle before returning � and it doesn�t even yield while doing so.
Are there any other ways I can set the gain? Is there a way that doesn't poll the register that returns in a reasonable amount of time?
AFAICT, there's no good reason to only allow one module to be s
etting its gain at a time. An asynchronous call it really needed - one that makes it the API programmer's responsibility to check the status of the register, or one that spawns a thread and sleeps between polls, and signals an event or invokes a callback or some-such-thing. Or you could even just sleep for three seconds after setting all the gains, this way the delay would be 3 seconds total � not 3 seconds for each gain set.This NI-DAQ function call directly accesses the nidaq32.dll. While the nidaq32.dll is multithread safe, it is not a multithreaded DLL. This is also described in the KnowledgeBase entry 1V9DSHDM: "Can NI-DAQ Handle Different Operations at the Same Time? Is It a Multi-threaded DLL?"
You are correct that the SCXI_Set_Gain function is not asynchronous. Thus, you do have to wait till that function returns before calling the next one. LabVIEW has found a way around this. So, you can actually use the LabVIEW functions to set the gain on these modules without having to wait as you do with SCXI_Set_Gain.
Regards,
Geneva L.
Applications Engineer
National Instruments
http://www.ni.com/ask -
How can I list the songs in an album in iTunes without having to do it one by one? Some albums are not numbered or they show 1. 1. 1. 1. 1. 1. 1.
Poor metadata needs to be corrected if the album is to display properly in iTunes. iTunes sees an "album" as any collection of tracks with the same Album title and the same Album Artist (or Artist if Album Artist isn't set). Each track of the album should have distinct Track V of W and Disc X of Y vaules. W,X,Y are optional, but X may be needed for multi disc albums.
See Gropuing tracks into albums for details.
tt2 -
My iTunes won't scroll all the way to the bottom. How can I fix this?
I have a large library, and I can't scroll all the way to the bottom. This is the same for the iTunes homepage, and any other pages, so that I cannot get to the bottom of the page. How can I fix this?
''downloads won't open from the Download List:''
The Downloads Manager ("Ctrl+J") is more like a log of downloads, it does not verify that the download still exits. Make sure you are setup to download to a permanent location, not into temporary files that get cleaned by the browser or by CCCleaner or something designed to clear out temporary files.
Tools > Options > General > Downloads: ...
Tools > Options > Privacy > [x] Remember download history
Don't clear your download history automatically, but having a lot there whether they exist or not, can slow down Firefox at least it was an issue:
:http://img232.imageshack.us/img232/4928/clearcachew.png
The may be additional about:config settings in addition to the above. -
Can't get the pages sidebar to scroll all the way down
If I'm using Acrobat 9, and I have the pages sidebar open, I am unable to scroll all the way down to the very last pages. For example, if I have the sidebar set so that each row has thumbnails for two pages, and the document has 51 pages, I can only drag the scrollbar down far enough to show page 50. I can access the last page, but I can't select the icon to, say, move it to another place in the document. Same thing if it is four pages wide and the document's lenght isn't a multiple of four: the sidebar doesn't want to show the last half-full row of pages. Any ideas what might be causing this?
Useful article here on the causes of the Spinning Beach Ball and how to troubleshoot it:
http://www.computerworld.com/s/article/9177479/Troubleshoot_the_spinning_beach_b all?taxonomyId=89&pageNumber=1
and also this:
http://www.thexlab.com/faqs/sbbod.html -
When I am on the internet, my screen will suddenly scroll all the way to the bottom and will not respond to any commands. All of the other programs are then affected the same way and you cannot even use the commands at the top of the screen becayse they all scroll to the bottom. After a while, the screen resets by itself. Help.
It sounds like a problem wih the backlight inverter. Usually they just go, instead of on and off.
In a dark room hold a flashlight on the display when it blacks out. If you can see the items on the desktop, it's probably the backlight. -
Hi all...
My user ID is Keychain Access won't allow me to access my information in my Keychain. I can't seem to fix it. What do I need to do? I don't really know how to explain it but I can access all the other keychains just not my user account keychain. Can this be fixed?
Thanks!That is correct... I know the Admin password but the password for my keychain is not correct and I can't seem to remember what the last password would have been. Any ideas how to reset it? Maybe delete and recreate? I know I may lose some info. Thanks!
-
I'm trying to make a AUTO slide show. I can select all the other actions like mouse clicks etc. but
I'm trying to make a AUTO slide show. I can select all the other actions like mouse clicks etc. but ON load will not work.
PLEASE HELP>
I do not know how to reload/reinstall "ADOBE" golive default actions. I'm using golive cs mac version and "ON LOAD" action. I can't select it when creating a golive action.....It converts it or something to a rollover..
How can I reistall basic adobe actions???
Is it a bug???
Is it a known issue???
Do I need something??
Am I missing something???
Thanks a bunch..
KevIn article <[email protected]>,
[email protected] wrote:
> I do not know how to insert the auto slideshowaction as a head action item.
> The steps.
> Can you explain how to do it?
I just remembered I have a couple of screen snaps online to explain how
it's done:
1. place your base image and name it in the inspector
2. from the smart objects palette grab the head action item, the one
with a question mark in its upper, green half - the 2nd one from the
left. Drop that into the pages head section.
3. in the inspector set the action to run OnLoad and select the base
image that you named in the first step and set the other parameters.
This was done in the days of GL6, but not much had changed in GL CS.
Anyway you might also refer to GL's online help. It describes how to set
up all the actions that ship with GL.
Cheers Martin -
Strange...safari scrolls all the way down on random pages...
It seems that with one page or two, Safari loads them just fine, but upon completion of loading, it instantly moves to the bottom of the page...
this is VERY frustrating. Everytime I load the page I have to manually scroll back up. The page that this always happens with is torrentspy.com (no, not used for the torrents, but for their news).
Could someone check to see if it's just me, or does safari just have a problem with torrentspy? Thanks.Hi Andy, Flipperbw
Checked on the Pb 2.0.4. scrolled all the way ☟.
On the fp 1.3.2 all the way down & the text is off. These errors generated
in the console:
[351] http://www.spikedhumor.com/feed/SpikedFeed.aspx?totalitems=3&title_length=30&desc_length=45&date_range=1&headfont_size=12px&bodyfont_ size=10px&font_face=Arial&title_color=1C5C9A&desc_color=548BC2&rating_color=F385 00&commentcolor=F38500:SyntaxError - Parse error
[351] http://www.torrentspy.com/staticFrame.asp?z=Footer&c=US&a=0&r=7.35132694244385E- 02:TypeError - Undefined value
[351] http://www.torrentspy.com/staticFrame.asp?z=Footer&c=US&a=0&r=7.35132694244385E- 02:TypeError - Undefined value
Intel iMac 2.0.4 it will not load beyond 26 items to the 27 for at least 8 min. no logging created in console.
http://validator.w3.org/check?uri=http%3A%2F%2Fwww.torrentspy.com%2F
Eme♪;~[) -
In safari a lot web pages will not scroll all the way down
a lot of web pages in safari will not scoll all the way to the bottom what do I do
You can try to resetting Safari. Tap Settings, then tap Safari on the left side. Then on the right side - tap clear history, clear cookies, clear cache. Clear all three. Reboot your iPad. Hold down on the sleep button at the top until the red slider appears and slide to power off. Then hold down on the sleep button until the Apple logo appears and the iPad will restart. Launch Safari and see if helped.
If you are trying to scroll through an area of text and can't scroll to the bottom try a two finger scroll. -
I updated to itunes 7.02 yesterday and now I have no audio. The side switch says mute or headphones. How do I listen to anything without headphones?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
Cheers, Tom -
My front screen seems to zoom in when I start it now. AND, now I can not see the page fit the screen. It makes me scroll on the borders to move parts of the screen into view. Something changed and I don't know what happened or how to get it back to normal. Please HELP!!! Thx!
it is possible that zoom maybe enabled i think double taping with three fingers should disable it.
or you can go into settings>general> assessability> zoom and turn it off.
hope this helps -
Newbie Question... How do you make sure java can find all the imports
Hi everyone,
I am new to Java and so far I really like it. But I am having problems porting applets to my websites. How can you make sure that all the references can and will be found in the applet...
for example,
I import javax.media.ControllListener in a project I am using and it works great in the applet viewer but when I try to port this to my website I'm working on, java can't find it. I really would appreciate any help on this cause then I would have java power :) and will keep me from losing my hair :).
Thanks for those who help me.
- StanHey jwenting,
Thanks for the quick response. Classpath definitely makes sense so I have been reading up on that... But do you include .classpath file in your website too? And how would you reference it if you need to reference it?
- Stan -
How do i get to the top of an iTunes playlist without having to scroll all the way
when i am down at the bottom of one of my playlists and i want to get to the top i have to scroll through thousands of songs and it takes forever i was just wondering if there is an easier way to get to the top of a playlist?
Hi Dlink123,
To move to the top of the list, you would use the Home button as with most places on the Mac, fn-Left Arrow on a MacBook Pro.
OS X: Keyboard shortcuts - Apple Support
fn-Left Arrow
Scroll to the beginning of a document (same as Home key)
fn-Right Arrow
Scroll to the end of a document (same as End key)
Note you need to be in the song list so it knows what your are moving to the top of, so click on a song first if none is currently selected.
Thank you for visiting Apple Support Communities.
Nubz -
When reading my e-mail after about 20 or so I can't go down any farther. There is no arrow to scroll down on the right side of the screen. I have to delete some messages in order to go on down the mail list.
And attached is a screen grab showing selected e-mails in the Inbox...the white space below are e-mails too!
Maybe you are looking for
-
How to install 3 Excel Add-Ins in one deployment ?
I have 3 excel add-ins which work in conjunction with each other. I want the user to install all 3 at the same time, from one install package. How to do that? I am following the steps in "Deploying an Office Solution by Using Windows Installer". Thi
-
How do I get quicktime 10 to play avi files
Bought a macbook pro a few months back, and it doesn't seem to play avi files. How can I fix this.
-
Skype unlimited asking for credit for skype wifi
I just purchased the new Surface pro 2. With it I was given a 12 month subscription to skype unlimited world and skype wifi. I redeemed by code and can see the subscription in my account. I was in Newark airpoirt corrected to as skype wifi access
-
How to highlight lots of things
I need to delete large amounts of things and need to find a way to highlight them in blocks and delete. can anyone tell me how to do this?
-
When will LR and PS support the new Canon 7d Mark ii raw file format?