How to adjust region position in Arrange window?

It must be simple, but I can't find how to locate the left edge (or length) of a region accurately short of zooming in and dragging it. I'm constantly zooming in for precision, then back out for view. I'm looking for an indicator like the one that shows the position of the playhead, that I can set when a region is selected.

Sorry to be dense, but I don't see it yet. If I open the "Media" toolbar I can click a "Bin" tab and get a list of the Regions, but there are only three columns: Name, empty, and Info. The region start and length are not displayed. If I open the Audio Bin under the Window menu, the parameters are not shown either.

Similar Messages

How to find a region in the Arrange Window

I'm trying to find two audio files that are apparently in regions in my arrange window on Logic 9. I can see them in my Audio Bin but I have no idea where to find them in my Arrange Window. I don't know if they're wedged in between or underneath a hundreds of other regions (yes I have that many regions).
Is there a method or shortkey I can use to find these specific regions? You know...like a "control F" for regions in the Arrange Window? Ideally I want to get rid of these files but I don't want to have any "ghost regions" that might complicate things. I just like to have everything nice and clean.
Thanks for any help.
p.s. In case someone asks these questions I already have answers:
Q1: Why can't you just find the regions you're looking for manually?
A1: Because I have too many regions in my Arrange Window.
Q2: Why do you have so many regions?
A2: Because that's how I work. The number of regions I have shouldn't be related to the efficiency of looking for specific regions.

You could check if the regions may exist inside a take folder, a normal folder, or press H to see if you have any hidden tracks.
But if you are brave enough to try to soft-delete all the other regions from the Bin, it should be easy to find the two remaing ones in the Arrange window, unless you also have a lot of MIDI regions. What happens if you select all the regions in the Audio Bin (Command-A), Shift-click on the two regions you talk about to deselect them, and then (temp.) delete all the regions in the bin? You can Undo this afterwards, but NB: remember to select "Keep" (and "for all") if you are asked whether you also want to delete the recordings from the hard disc itself.
"Zoom To Selection": select a region (not a file) in the Bin, activate Arrange (eg by pressing tab one of more times until Arrange has a white-ish frame), and then press Z on your keyboard. This will zoom in on the selected region, another Z will show the whole arrangement again.
"Play from Selection": press Shift and Enter.

HELP!! How to get the position of active windows in the desktop

How to get the position of active windows in the desktop

You mean, active windows other than the program you're running, or windows the program puts there? And a real desktop (like where MyComputer is), or a desktop pane?

How to change the position of a window created in the script?

Hello to all
A window called from another window are the same size. How can change the position of the window relative to the caller call window?

That is worked, but for abs.coord. How make releative coord.?
When I include that in my script, window show without elements ! See attachments №2

How to adjust the position of an image in a full screen slideshow

Hi I'am using a full screen slideshow composition on my page and muse is not letting me adjust the position of the image to the top, middle or bottom of the frame under the fill option when the image is selected in the slideshow.
I also find it very buggy when previewing the page in a browser, some time it re-sizes the image only larger but never scales down proportionately, only on rare occasions. Why does this happen?
Can someone please help ASAP I need to get this site done by tomorrow.
Thanks,
Gary

Welcome to Apple Support Communities.
The effect you're looking for is 'Scale'
In Keynote '09, 5.1.1 select the graphic.
Click Inspector in the tool bar, Build Inspector (3rd icon from the left), (Build In and Build Out are both set to None for this step) Effect, Action, and then Scale.
It rescales ('zooms') the selected item (image) up or down from 0% to 200%
Clicking on the More Options button at the bottom opens a drawer to the left, and gives you more control over how the build occurs, whether they happen automatically, timed, or when you click, and re-order build steps.
At 200%, double the original size, resolution could be a problem. There is a workaround, because it also scales smaller, down to 0%. So I would scale the graphic down 'small' as the first step to fit at the bottom, (even hide it behind a background-colored box) as you scale it down, and then at the end, scale up to full size to fill the screen at 'normal' resolution.
In the attached example, I use a 'scale' up to go from 100% to 130% on a map, and use arrows and a flashing line to point out the road where a specific business is located with 12 steps. Some elements in my slides have been intentionally obscured. For simplicity, I've eliminated showing any steps but the initial title and the scale.

How to adjust images in a page to take printout

Hi,
I have few images that I want to first adjust in photoshop in a single A4 page to take print out. I would like to know how to adjust the page and arrange the photo in a row and column way.

you launch bridge from the top bar in Photoshop, then change the options in the output panel.

Loss of Right click scissors in arrange window

When editing regions in the Arrange window I prefer to have the standard mouse arrow-head pointer selected. I recently discovered that a right click on the wheel mouse switches to scissor action for cutting regions. I was delighted to discover this as the speed and ease of editing was immediately improved.
I don't recall changing anything on my system, but since the Christmas break I discover that useful facility has just disappeared !
Can anyone help please.

You can have 3 tools assigned to your mouse:
1. left click
2. ctrl + left click
3. right click
To assign them simply click on the tool with the appropriate mouse key.
In your case, right click on the scissor.
cheers
rob

How to Collapse Tracks in Arrange Window?

I've been searching this and some other forums, and have a feeling I'm outta luck, but figured I should post a question here before writing up another Feature Request...
Separate from the Hide Track function (which isn't quite what I'm wanting), and separate from creating region-based Folders (which I've only just begun to explore), is there no way to simply designate groups of Tracks in the Arrange window, and then be able to collapse or reveal that particular group with a single click -- in the same way that a folder's contents can be collapsed or revealed in Finder list view?
I'm currently building a Logic project which draws on bits and pieces from 3-4 dozen .aif files, each of which I'm dragging onto a separate Track, and then on each Track am splitting the content into multiple Regions. I'm using color-coding of those individual Regions, along with text labelling, to help distinguish between different kinds of content. I'll then be copying specific Regions down to new Tracks, from which several different composite versions of the material will be outputted.
All this means I'm going to end up with a LOT of Tracks, and it would be a huge organizational help if I could easily collapse/reveal different groups of Tracks at different times, so I was only having to see and scroll through the relevant ones.
But am I correct in understanding that while some of Logic's competitors have this kind of feature, Logic itself -- astoundingly -- does not???
Bracing myself for the bad news,
John Bertram
Toronto

Bee Jay wrote:
The nearest you can do is pack the tracks into a folder, and delete the source tracks, you you end up with only one folder track in the top level, and you can go "into" the folder to see the tracks and contents of it, and come back out again.
I didn't realize there was the option to delete the source tracks but retain the Folder -- perhaps I'll explore that.
But am I correct in understanding that while some of Logic's competitors have this
kind of feature, Logic itself -- astoundingly -- does not???
Well, not every piece of software has every feature imaginable - and this hasn't stopped people making music with Logic.
In order to implement this, you'd probably have to introduce some kind of track group which would be similar to region folders ("track folders") in order to group like tracks and therefore fold and unfold the track folders' contents - but this might start to get confusing to have two different, but similar functions in the arrange page.
I admit, "astounding" was just me venting. But the hypothetical implementation you describe is exactly what I was hoping to find. As for potential confusion, perhaps they'd need to avoid the word "folder", and call them "track groups", or something like that. But I think it would be an extremely useful organizational tool for those projects where your Tracks start numbering in the several dozens. (Plus it would allow the user to re-position a whole group of Tracks in one move, rather than having to select, drag, and position each Track one at a time.)
Sounds like Feedback Time, once again ('guess it beats doing actual work!).
Thanks very much for the well-considered reply.
jb

How can I get back to "all tracks" view in my arrange window

Hi... I hit something, I don't know what, and know I can only see (and navigate within) a single region of a single track in my arrange window. How can I get back to the "full view"?
thanks,
scotty

try double-clicking an empty area of the arrange window to see if can get out of that

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this?

In Logic X, the mouse click wheel scroll is way too fast on the arrange window and the piano roll. Is there a way to adjust this? This is the way I scrolled for MIDI editing on Logic 9

Hi cris2121, assuming you're using a mouse from apple, go to >System Preferences<
it's here where one can configure a mouse device.
Additionally you can also configure Scrubbing in Logic: "When in scrub mode, you can slowly move the playhead in the Tracks Window and the Audio (and optional MIDI) will be played back. The playback speed depends on how fast you move the Playhead in either direction."
Have a nice day!

How to popup a page from a button not in a region position

Hello.
I am using Apex 2.2.1. I have a form (not a report) on which I've placed a button that is positioned "among the items" as opposed to being placed in a specific region position.
When the button is clicked I would like to have another page popup. The problem is that I can get this to work only if the button is placed in a region position. With the button in a region position, I define the target to be a URL and then place a call to the popUp2 function, as in:
javascript:popUp2('f?p=&APP_ID.:32:&SESSION.::NO:::', 900, 700);
This works fine.
However, I need to position my button on the immediate right hand side of a form item. But when I create a button in such a position, I have no field in which to place the call to the popUp2() function. Instead, I have to create a "Branch to Page or URL" and then place my javascript call in the Branch field. Unfortunately, when I click the button, Apex wants to branch to page zero instead of the desired page. I saw that when I move the mouse over the button, Apex shows:
javascript: doSubmit('MY_BUTTON_REQUEST');
And, as mentioned, Apex tries to branch to page zero.
How does one call the popUp2() function from a button that is not placed in a region position?
Thank you for your help.
Elie

Hi Elie,
I had the same problem ... I only got it solved with creating a hidden item and adding the input-tag into the "Post Element Text" field.
Just have a look in the source code of your page, how a button is build and copy the necesaary code to the mentioned field. So you get a button with ApEx layout and can add your javascript call.
chrissy

I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

I have been sampling new imported drum loops. And if I adjust region to song or time strecth it updates the audio file in the library. How to stop this? I lost the original setting to one loop. automatically doing it ??

This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2

How to adjust the size of a region?

Hello, would anyone know how to adjust the size of a region size?
Thanks for your replies!

Checkout an interesting article called " Oracle9iAS Portal Best Practices: Regions" to understand resizing region.
http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_REGIONS_0.HTML

How to adjust the window size in overview screen of a scorecard ?

Hi Experts,
In SEM application is it possible to adjust the size of the "Perspective" windows in the Overview screen of a Scorecard ?
If possible how ?

hi,
If you change the window size of the script in the original language, it should reflect in the other languages.
Please activate the script in english once again and see the spanish form again.
@SAP_WIZ
As far as chaniging window size is concerned, Please edit your script in ES and then change it.Or login in ES and then edit the script.
This is not possible, because the original script is in english.
Regards
HM

How do i Arrange windows side by side on the desktop to compare 2 documents side by side?

''''''how do i Arrange windows side by side on the desktop to compare / read 2 documents side by side?''''''

Go to the menus: Window - Arrange - xxx
-Noel

How to adjust region position in Arrange window?

Similar Messages

Maybe you are looking for