How to adjust the brightness of a video clip/still pictures ?

Hi there,
I have a video & a still picture on the timeline. But the video & picture are very dark.
I wanna apply an effect to increrase its brightness. Where is the brightness effects located ? Sorry, I cannot seem to be able to find it in the Video Effects.
Thanks

Look at the color correction part in the Inspector.
If you have other clips that look ok, you may try "match color" to make the not so well exposed more similar the better ones. If that doesn't work well, click the little arrow next to "Correction 1", and there you can tweak the exposure, but also the saturation and hue of your clip. Don't overdo it (unless of course you do so willingly and knowingly :-)).

Similar Messages

  • How to adjust the brightness of a second display connected to iMAC 2012  by Apple Mini DisplayPort to Dual-Link DVI Adapter?

    How to adjust the brightness of a second display (Dell 3007WFPHC 2560x1600 dpi) connected to 27 inch iMAC 2012 through thunderbolt port by an Apple Mini Display Port to Dual-Link DVI Adapter?

    Macs control computer by USB.  With a non-Apple display, you will have to use the brightness control on the display.

  • How to adjust the brightness of an apple monitor from Windows 7?

    how to adjust the brightness of an apple monitor from Windows 7?

    In Windows 7 go to help display brightness or help power saving.

  • No longer able to adjust the length of a video clip in imovie 6 HD

    Without warning (or reason) I can no longer adjust the length of a video clip (new or old) in imovie. I've tried the old way of highlighting the clip and putting the cursor at the start or end, but the cursor doesn't change. I've also tried double clicking on the clip but then the length is fixed.
    This problems happens in new and old movies and remained after I deleted and reinstalled imovie.

    I searched further using the correct word (trim) and found that I had to turn off the audio levels

  • How to adjust the brightness on Tecra 8100?

    hello there i'm using a tecra 8100 and I just cant find where to adjust the brightness which is really giving me problem. Please anyone help.

    > Since I install my Windows XP, I can't use my Fn button.
    @pardhi
    You have installed the OS manually and you didnt use the Toshiba recovery CD. Am I right??
    The fresh Microsoft OS does not contain the Toshiba drivers and therefore the drivers for the FN functions must be installed additionally.
    The problem is that you will not find any drivers for the Windows XP for the Tecra 8100.
    The WinXP drivers are not available and therefore you cannot use the FN keys

  • How to stop the jerking of my video clips? on Premiere Element 10

    How do I stop the jerking of my video clips when I add  effetcs ..to do not zoom in or out etc..smoothly.
    Thank-you,
    Claudette

    Claudette,
    When you started your Project, from the New Project screen, you were given some choices. If you do not recall what you chose, you can go to Edit>Projects Settings>General, and see what you chose. I do not think that location has moved in PrE 10, but if it has, someone will correct me.
    Now, in very general circumstances, one should choose a Project Preset, that matches their Video Source Files 100%, or there can be issues.
    However, if one ONLY has Still Images, and there is no Video being used, things differ a bit. In that instance, one would ask themselves a question, "how will I deliver my Video, created from those Still Images?" That answer might be a DVD-Video, a BD (Blu-ray Disc), a streaming Video files on a Web site, or as a file, that one sends to others. With a Stills Only Project, one would most likely choose a Project, that matches their delivery. If there are several delivery schemes used, then I would recommend choosing the one that is the highest resolution, and handling the others with Export/Share.
    Now, within all Project Presets, there is a Frame Size, say 720 x 480 for an NTSC DV Project, designed to go to DVD-Video, or perhaps 1920 x 1080 for the production of a BD. Though PrE can Scale large Still Images to fit, it does not do the best job, and there is a major processing "hit," that can bring a computer to its knees. For those reasons, we recommend using a program, such as Photoshop, or Photoshop Elements, to do that Scaling, before one Imports the Still Images into the PrE Project. For SD (Standard Definition) DV, the "rule of thumb" is to Scale to 1000 x 750 pixels. For an HD Project, that same thinking would be 2000 x 1500 pixels. That gives one some "wiggle room." I will actually Scale to the exact pixel x pixel dimensions, unless I have a compelling reason to do otherwise - then, I will calculate the larger size, and Scale to exactly that.
    How will you deliver your Project?
    What are the specs. of the Project (using the method above)?
    What are the pixel x pixel dimensions of your images? If they are random, then concentrate on the larger ones, please.
    Good luck,
    Hunt

  • How to change the contrast of a video clip ?

    Hi there,
    I am embarassed to ask this basic & elementary question but it is driving me nuts finding it !
    I want to adjust the contrast of the video clip that I imported.
    When I went to the color board, it only have COLOR, SATURATION & EXPOSURE to be adjusted.
    But where is the option to adjust CONTRAST located ?
    Thanks & regards

    Tom Wolsky wrote:
    Open the video scopes and set it to waveform monitor. You adjust the contrast in the exposure board. Reduce the shadows to zero and the highlights to 100. Adjust the mids as you like.
    Sorry Tom, my bad ... how do I open the video scope ?
    When I click the video clip in the browser, what shows in the Video tab on the info panel are only:
    1) Color - which upon clicking only have the option to tick & untick the "Balance: Not Alaysed" checkbox
    2) Spatial Conform
    Any ideas ?
    Thanks

  • Can I adjust the speed of my video clips?

    I would like to use slow motion and fast motion in the movie I'm making with iMovie '08, but I cannot figure out how. I am positive I was able to adjust the speed of clips in iMovie '06, but I just can't find where/how to do it in iMovie '08. Have I lost my mind or has this option been eliminated in iMovie '08?
    And as a bonus question, if it has been eliminated, WHY?

    I was able to adjust the speed of clips in iMovie '06, but I just can't find where/how to do it in iMovie '08. Have I lost my mind or has this option been eliminated in iMovie '08?
    You can within iMovie HD. You can't from within '08. (You can pre-edit a clip for fast or slow motion externally.)
    And as a bonus question, if it has been eliminated, WHY?
    It is not so much a question of why it might have been deliberately eliminated but a question of how to add it to iMovie '08. As has been said hundreds, if not thousands, of times already, this is an entirely new application editing in an completely new manner. Motion changes require re-rendering of the file to use it in a project. iMovie '08 does not do any rendering until the project (i.e., which is merely a set of instructions) is actually completed. In case you haven't noticed, none of the third-party special effect "plug-ins" are compatible with iMovie '08 either. Your best bet is to either use iMovie HD (v6.0.4 available free online to iLife '08 users). It is either that or learn how to create such effects externally with other applications like the JES Deinterlacer (free) or QT Pro ($30).

  • When I use the "snapshot tool" some images are very light. how can I adjust the brightness....

    I have windows 7 and Acrobat X Pro.
    When I use the snapshot tool I cannot figure out how to adjust the brightness on that image? On my old computer a picture tollbar would pop up. A lot of images are very light and I need to darken them.

    My not be much you can do. However, I would just clip them into my favorite image tool (in my case IrfanView) and adjust there.

  • My display is dull, how do I adjust the brightness?

    I have an iMac, the screen has gone quite dark (as if in sleep mode)  I have to sit in a darkened room to see it properly. Have I hit the wrong key or key combination of keys? How do I adjust the brightness? Help

    If you are still on 10.4.11 (stongly doubt it) you probably have wired keyboard, the F3 key is for brightness. Also check System Preferences - Universal Access - Seeing and check there too.

  • Why can I not adjust the volume on a video when accessed from the lock screen

    Why can I not adjust the volume of a video in my pictures folder, when accessed from the new lock screen option?

    There is no way to access videos directly from the lock screen.
    What exactly is being attempted here?

  • How do you adjust the brightness on a Thunderbolt Display

    How do you adjust the brightness of a Thunderbolt Display attached to an iMac ?

    I had this peculiar ‘issue’ hooking up to my MacBook Retina when my Thunderbolt Display was delivered but Applecare  - thanks Andrew - got me there. It seems daft!
    The Thunderbolt Display Brightness slider IS there – you just have to know how to make it show up.
    At initial set-up of the Thunderbolt Display [or if the Brightness slider is ever not visible in the System Preferences> Thunderbolt Display window], so long as the Thunderbolt [external] Display and the Macbook Display are ‘mirrored’ I can control the Thunderbolt [external] Display via my MacBook Retina Brightness keys [F1 & F2] – or by the Brightness slider that THEN appears in my System Preferences>Thunderbolt Display window. Once set up the Thunderbolt Display System Preferences Window continues to show the Brightness slider but I occasionally lose it if my MacBook has been disconnected from the Thunderbolt Display for some time – and I then have to start over.
    So:-
    Apple menu >
    System Preferences>
    Displays>
    Click Arrangement [at the top]
    Click Mirror Displays [at the lower left]
    That then gives me-at-least a Brightness slider on the System Preferences> Thunderbolt Display window [as well as on the Built In Retina Display window] and I can then adjust them independently.
    Oddly, having set this up just once the Brightness slider then remains on my Thurnderbolt Display and I can control it [and my MacBook Retina Display independently]. Occasionally I lose it again and have to start over.
    Hope this works for others.

  • How can I adjust the brightness of my old Apple 24" LED Display?

    How can I adjust the brightness of my old Apple 24" LED Display?

    Jacob,
    Thank you for the quick response. I opened both the TIFF and the EPS in Illustrator. I used the Eyedropper tool to get the CMYK values of the color of the text part in the TIFF, then I went back to the EPS and selected the text and input the CMYK values in the color tab. I know it's not precise, but it's close enough. Could I have done this better?
    Yes, I have access to Photoshop but I haven't tried using it with vector files. I am really new to graphic design and I need all the help I can get. Thank you!

  • How to adjust the screen brighteness and contrast

    I programmed a media player.
    I want to adjust the brightness and contrast in the screen of movie.
    How can I do it?
    Thank you

    programmed a media player how? JMF? There are filters or processors you could put in the chain to do whatever to the media

  • How do i adjust the brightness on my screen? it's dim like when the power cord is out.

    After my wife had the laptop out of the house today, I plugged it back in and the screen brightness is very dim...like what it looks like when the power cord is not in...usually, when I plug the cord back in, the screen becomes brighter...that has stopped. Any ideas to fix?
    thanks.

    Hi,
    Here are some common ways to adjust the brightness.
    Open windows Control Panel, open Windows Mobility Centre and adjust the brightness here.
    On a lot of notebooks, tapping f3 will often increase the brightness ( with f2 reducing it ).
    Open windows Control Panel, open Power Options, click Change Plan Settings next to your selected power plan and you can adjust the brightness here.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

Maybe you are looking for

  • Hardware Acceleration Causes Blue Screen of Death - Resolution?

    My computer running Windows 7 64 bit started crashing with Blue Screen of Death when Viewing YouTube videos or other videos like The Daily Show.  The "solution" was to turn off hardware acceleration. The crashing appears to have stopped, but now the

  • I didn't know that pressing the x by an app in your purchases list deleted it. Can I get it back?

    I didn't know that pressing the x by an app in your purchase list you deleted it. Can I get it back?

  • Sending spool pdf through XI to external app

    we are able to produce the .pdf locally from spool files with no problem. the problem occurs when we try to pass a pdf to XI for transmission to Filenet. the XI guys say they can't handle .pdf native format - we have to convert to string an encode in

  • Convert Pdf To Xls File On Mac

    The problem is the fact that the stories come in PDF format. They all are complicated, with multi table, and normal 60-100 pages in length. You need to change PDF to XLS format to put them within the administration process. Get more info  >>> https:/

  • Help with drop create and update table

    Sir/Madam, I have joined 5 tables and selected some columns ,then I need to update some columns in that. After updating I need to create a report with the new column values. To do this my method is to create temp table with the select statement then