How to adjust the layout column size in WPC?

Hi All,
I want increase/decrease the layout size in Web Page Composer?
After I dragged and dropped the html file, how to reduce the column width or height?
Thanks
Sundar

Hi
You can create a new layout with width and height as per your requirements and use the layout in WPC.
For creating new layouts, check the help link below
http://help.sap.com/saphelp_nw70/helpdata/EN/45/d2970be57f4ebbe10000000a11466f/content.htm
Regards,
Yoga

Similar Messages

  • How to adjust the camera overlayview size

    i am making a photography app and need to overlay an image over the camera. i am wondering if there is a way to adjust the size of this image because it's going to full screen by default.
    currently, i'm solely displaying the overlay picture using the code:
    picker.cameraOverlayView = cameraCase;
    where the "cameraCase" is a uiimageview that is being overlayed on top of the camera and "picker" is the uiimagepicker.
    i would also need to add buttons (of custom sizes) on top of the camera view as well - i'm assuming i can adjust the size of these as i would a picture.
    any knowledge you're willing to share would be much appreciated!
    many thanks in advance!

    that that wasn't really the correct answer - anyone got anything?

  • How to adjust the Date picker size

    how to change the size of the Date Picker.
    I am using time inside the data picker and window is too small.
    I cannot see the OK and Cancel buttons.
    Let me know
    thanks

    It is an known APEX 3.1 issue metioned in the "Oracle Application Express 3.1 Known Issues & Limitations" Page([http://www.oracle.com/technology/products/database/application_express/html/3.1_known_issues.html]).
    There is a workaround posted in forum, see Re: Date popup problem in APEX 3.1 and this post was also mentioned in the "Oracle Application Express 3.1 Known Issues & Limitations" Page.
    JT

  • Adjusting the layout to print all the text

    Could anyone tell me how to adjust the layout in Pages? I've developed a marketing postcard and some of my copy on the far right of the card is covered by a light grey frame that I believe is the layout. All the margins are set to zero and I've tried to pick the layout from the ruler, to no avail. How do I move the layout (light grey frame) so I can print all my copy?
    fairly new user to Apple, iMac G5 and loving it   Mac OS X (10.4.8)  

    Hello Evelyn
    From your description I'm not sure exactly what you are referring to. If you select View > Show Layout and then drag the corner of your window so that more than your page is shown on the right. You should see a dark grey box on the right hand side of the window. This is just so you can see the edge of your page.
    You will find that your page is outlined by a thin light grey border. This represents the area of your page that your printer cannot print on. Pages picks this up from the print driver for the printer you have selected in Page Setup or the default printer. This can sometimes be quite large - on my printer it is 0.25cm.
    Within the light grey border is the printable area of your page. You will notice that on a new blank document this consists of boxes for the header, a single column of text and a footer. You can control the dimensions of these by adjusting the relevant settings in the Inspector.
    From your description of margins set to zero I suspect that you are referring to the non-printable area but you should see it around all of the page not just on the right hand side. Your printer may support borderless printing but how the OS X driver and Pages interact with this facility will be very device specific. You could try fiddling with the setup but the simplest solution would be to adjust the layout so that your copy fits within the printable boundary. It is pretty easy to do.
    I hope this helps you but if you are talking about something else, please reply with a more detailed description.

  • How to adjust the size of a region?

    Hello, would anyone know how to adjust the size of a region size?
    Thanks for your replies!

    Checkout an interesting article called " Oracle9iAS Portal Best Practices: Regions" to understand resizing region.
    http://portalstudio.oracle.com/pls/ops/docs/FOLDER/COMMUNITY/OTN_CONTENT/MAINPAGE/PUBLISH_CONTMGMT/TECHNOTE_REGIONS_0.HTML

  • How to adjust the font size of iPad in printing a web page.

    How to adjust the font size of iPad printout of web pages ?

    In HTML Header I put textDid you mean Page Header Text? It wouldn't have done much of anything at all in the HTML Header...
    However, the font doesn't do anything.Yet another universal selector problem: see +{message:id=4184109}+
    How do I overwrite the style sheet? I am wondering if I change the default style sheet, does that also affect the other pages, which is not what I want. In that case you can just include the CSS inline, which will also get round the universal selector issue. You are also recommended to use a semantic HTML element instead of deprecated presentational elements like <center> and <font>. Assuming this text is the primary heading on the page, use <h1>:
    <img src="#WORKSPACE_IMAGES#my_header_logo_white.jpg" alt="" title="Application" />
    <h1 style="font-size: large; font-weight: bold; text-align: center;">Web Management System</h1>

  • How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

    How to adjust the size of the slide in keynote to 7.5 feet high x 3.1 feet wide?

    Keynote is not designed to produce printed media, it is set up is for video. There are dozens of applications that are designed for printed output on the Mac, Pages, Word, In design, Quark, Open Office, Libra.
    Pages is the accompanying application in the iWork suite that is specifically designed to print to paper, you should look at that first as it May be on your Mac already.

  • How to change the picture frame size in Lightroom 5 Book

    I would like to control the actual picture frame size when making a Book in Lightroom 5. Or else know the sizes of the different picture frames provided by choosing the different page layouts. That way I can either change the picture frame dimensions to accomodate each photo or change the image size to fit in the offered picture frame. I find that using the software as is winds up cropping the images in unwanted ways. Modifying the picture frame would be my preferred alternative. Appreciate any ideas

    Hi again Tony,
                I have been using Adobe Photoshop 7, Photoshop Elements, Perfect Photo Suite, Photo Studio, etc., changing Image size, placing a picture on a page and then, do a simple last minute size adjustment by using the arrows to stretch or shrink it in place. Things would be a lot simpler if I could do the same thing with the cells in Lightroom 5. Cell pad adjustments do not fill the bill.
    I think we’ve pretty much concluded this exchange. Thanks again for your effort.
        david
    ay [email protected]
    Sent: Wednesday, March 12, 2014 11:27 PM
    To: dgbrow
    Subject: How to change the picture frame size in Lightroom 5 Book
    Re: How to change the picture frame size in Lightroom 5 Book
    created by Tony Jay <http://forums.adobe.com/people/Tony+Jay>  in Photoshop Lightroom - View the full discussion <http://forums.adobe.com/message/6205206#6205206

  • How to adjust the Fonts to fit the component

    The size of the text is much smaller than the size of the button. But when I put the letters onto the button, they are not properly shown. Instead of showing the whole letters, they become "..." on the button. I can not see them at all unless I make the window/frame to its full size.
    How to adjust the Fonts or the properties of the components?
    Thanks.

    The best way is to use a layout manager, so that your component is laid out automatically to fit.
    If you really want to adjust the font size according to the size of the component, you would have to first retrieve the FontMatrix for your font, calculate the width of a particular string of text and see if it fits the component. However, why do that if you don't need to?

  • How to use the procedure column in reports

    Hi all
    How to call the procedure in reports as source.. If possible how to use columns of procedure in the layout column of report????

    Hi,
    Your query is not clear.
    1. In subject are you asking total column.
    A. Edit pivot view and go to Rows and click Total BY option here you can find option like (none,before,after) the you can select after it will display total all culms.
    2. I want use the columnC in columnD ? -- Am not understand.
    A. What my understand is you want to see the report only C and D values only.
    If it is correct we can apply filter in report level click column filed and apply not equal to A then it will show only C and D only.
    If it is wrong pleas post me correct one with example. Will try to help out this.
    I am not sure this is what your looking so far.
    Award points it is useful.
    Thanks,
    Satya

  • How to add the Assignment column on this post outgoing payment in f-53

    Hi all,
    how to add the Assignment column on this post outgoing payment in f-53?
    thanks.
    Joo

    Hi ,
    If you want to see the assignment column in f-53 process open item screen
    1. First in O7V3 check for t.code FBz2 which line layout ( 2 digit code is assigned)
    2. Then in t.code O7z4s check in the line layout and if assignment field is not there then insert the field.
    then check in F-53.
    Hopw it will solve your problem.
    Assign points if useful
    Regards
    Prabhat

  • How to change the layout of a category view

    I don't know how to change the layout of a category. I want to put 3 image's behind each other followed by some text, like a table with 4 columns. Instead of puting then in 4 rows

    larsprevo
    The category 'view' of items/folders uses the default style of the content area it is defined in (shared categories use the default shared style). Edit the default style to change the font/color of the items/folders returned within the category 'view'. Unfortunately, you don't have the ability to control the layout(like folder regions) - they always display in rows.
    Added an enhancement request for a feature that would allow you to control the display of items/folders in a category/perspective: 1828423

  • How to change the layout of the desktop before you login as a User into iPS.

    I am trying to change the layout of the anonymous user desktop. I know how to change the layout after i login as a User. All the thin channels except one get lined up in the first column of a thin-thick-thin layout.
    How to change that?
    Any help is greatly appreciated.
    Hugo Victor

    Go to available channel list and the select show advanced options, you should see the row and column attributes for the channel. Set it to your choice ..

  • How to adjust the blog thumbnail pic?

    In iWeb08 if you drop a picture into a blog entry, it automatically shows up on the main blog page as a thumbnail which is great. The problem is how to adjust that thumbnail (position/size)? There seems to be no way?

    Go to main blog page
    click on photo (this will then expose a photo properties box)
    Hope this helps

  • How to change the default window size display font size on Lync 2013 main window?

    Hi champs,
    Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
    Thanks,

    Hi,
    Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
    If not, as I know, there is no natural way to change it.
    If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

Maybe you are looking for