How to adjust the left and right Margin in PDF

Hi,
I've a dashboard ,when i open this dashboard in PDf , left and right margin are not in sink. How to adjust those margins.
Thanks,
Malli

Hi,
there are only two joins available for InfoSet in BI.
For more details about Infoset joins you may refer following SAP documentation or serch at forums.
http://help.sap.com/saphelp_nw04/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/frameset.htm
I hope it will help.
Thanks,
S

Similar Messages

  • Split header at the left and right margins

    I want to split my header where the book name is by the left margin and chapter title on the right margin. Is this possible?

    Hi Jerry:  This is my issue. As you can see, I have to tab over and then space over to get it over to the right margin.  Seems like quite a silly issue, but I can't figure this one out!  Also, in my format toolbar, I can't find the tab that's in your screenshot, nor do I find it when I go to customize toolbar. I'm sure this is an easy fix, and I'm overthinking it.
    Thanks for responding.
    Eleni

  • Remove left and right margin when display portlets

    What is the best way to remove the left and right margin when display portlets?
    I found a file called \portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\/
    MyPortalContentView.cs
    But I do not see a place for the left and right margins. What is the correct place to modify these margins? (How about the top and bottom margins too?)
    See the green highlight?

    That's it yeah, seems to curve upwards at the sides. Dunno whether leaving a heavy book on it might sway it back into position?!
    I had the display upgraded when I bought it so presumed it could have been done whilst 'in operation'. Apart from that there's nothing wrong with it really, doubt it's something they would take it back on anyway.

  • How can I separate Left and right audio channels in labview 8.5 tia sal22

    How can I separate Left and right audio channels in labview
    8.5 tia sal22
    Greetings All
    I have a working Labview vi that converts a math formula to an
    audio signal.  I would like to have the
    right and left audio channels playing different math audio signals is this
    possible?
    Example
    Right channel -> plays the audio signal created by a math
    formula
    Left channel -> plays the audio signal created by another
    math formula with adjustable phase control
    I’ve included a VI with a working audio and math formula but
    I’m not sure how to separate the left and right channels.
    I’m using labview 8.5
    I looked up a similar question on the
    support board and it said” use an instance of the the Sound Output Write that
    has a 1D waveform data type input (i.e.  Sound Output Write (DBL)). Each
    element in the array would correspond to a channel.”
    But I’m not exactly sure what he meant.  I’m using a formula to generate the wave file
    Tia sal22
    Attachments:
    fixed mathscript formula to sound test.vi ‏680 KB

    Sorry it took so long to get back.  Here's the new VI with it splitting out the left and right channels. 
    I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops.  I increase the buffers
    but I still get the clicks and pops.  I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in.  Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
    I'm using labview 8.5
    And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
    tia sal22
    Attachments:
    lvt_audio_realtime-out left right device ID test.vi ‏68 KB

  • How to fill up my laptop screen with Firefox horizontally as it currently has a 3" margin on the left and right sides?tly has a

    I just purchased a 17.3" screened-laptop using MS Outlook and Explorer 9 Browser. I cannot use Firefox as my default Browser because I cannot get Firefox to fill up my screen.When I open up Firefox, it maintains a large 3" margin on the left and right sides which does not exist when I open up Explorer 9. Increasing the font size only increases the text size vertically but does nothing to decrease the margin size horizontally.

    You can use this extension to set a default font size and page zoom on web pages:
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  • I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

    If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
    You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
    The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

  • How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

    I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

    myocom,
    You can highlight random points in DIAdem as well. 
    Here is an example:
    Use the cursor to move to the point you wish to highlight.
    Press the "Set Data Point and Flag" icon on each data point you wish to highlight
    When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
    I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
    The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
    I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
        Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
    Attachments:
    Report with highlights.zip ‏5 KB

  • How do I get page numbers on the left and right side of the page?

    I am finishing up a book in PAGES '08 on my Mac.
    How do I get page numbers on the left and right side of the page.
    I can get them on the page but I'd like them on the left and right sides.
    Evan

    If the icons are from dmg files that were used to install 3rd party apps like this one for VueScan
    Control (right) - click on the open dmg icon and select "Eject  xxxx" from the contextual window.
    Then find the actual dmg file associated with those icons
    and drag to the Trash in the Dock and empty.

  • How do I apply effects equally to the left and right channels.

    I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
    1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
    2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

    Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
    Thanks!

  • All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    All of a sudden my screen has black bars on both the left and right sides; all of my folders are overlapping as well.  Anyone know how to fix this?

    Did you try restart the Mac?

  • Cp 8 - How to add ppt slides to an existing project with space to the left and right ?

    After much trial and error, i know exactly what I want. The priority for me is clear and unscaled captured video, and my project resolution shall be 1260x700. 
    now, i want to bring my ppt slides in and respect the aspect ratio- this means that there will be blank space to the left and right of the slides. The active area of the ppt slide should be about  700 h and 4/3 * 700 width. To avoid scaling, i would love them to be 699 x 932 and have the areas to the left and right blank. i am also willing to make my project 1260x702.
    The objective here is to avoid scaling. I have seen that things look great when scaling is avoided.

    Maybe you'll find some ideas here: Create and Use a "Knockout" Master Slide - Captivate blog

  • White Borders Around the Left and Right Edge of a Published Movie

    Does anyone know how to get rid of the white borders that are around the left and right edge of a published movie? It looks like they are about a 1 pixel border. I have the "show borders" unchecked in the themes options.
    Any help would be appreciated.

    You need to add some CSS code into the HEAD area of you HTML publishing template to remove the default HTML margin.
    <style>{margin:0px;}</style>

  • Anyone know of a way to adjust the top and side MARGINS of a document printed from iOS numbers? The default margins are too wide. Need more working space.

    Anyone know of a way to adjust the top and side MARGINS of a document printed from iOS numbers? The default margins are too wide. Need more working space.

    Open the document,
    Tap the Tools icon (upper right).
    Tap Document Set up.
    Drag the margins to the position you wish (the actual margin width sould display as you are doing this).

  • It it possible to have info on the left and right sides of iweb templates?

    When I look at my iweb website there is empty space on the left and right sides of my screen. I was wondering if this space could be used at all?

    Hi
    You can increase the width of your Page, go into Inspector, Page Tab. From here you can adjust the Content Width, which is the width of your page, the bits that you see on the left and right are fillers, for people who's browsers are set bigger than your site. You can change the color that shows by changing the Browser Background.
    In the good 'ole days, most people had screens that were only 800 W x 600 H, but these days most people have at least 1024 W x 768 H (some do, no doubt still have 800x600). So, 1024 is really the max width you can go, dont forget that you need to leave some space for the browser as well, and the scroll bars.
    But pages this big are wider than normal, the best thing to do is experiment and see what works for you.
    Will
    1GHz G4, 15" PowerBook, Airport Network, 1G iPod Mini   Mac OS X (10.4.6)   www.willg4pb.com for iWeb tips

  • Enlarged photos show white borders on left and right margins

    Should these white margins be present when viewed in enlarged format? I can't get rid of these left and right margins when printing 4x6 borderless format so I assume it needs to be corrected in iphoto first.

    Did you crop your photos?
    Most digital cameras use a 3:4 aspect ratio. When you print onto 4X6 paper, you will have bands on the sides of the photos. It's the same thing as watching a "letterboxed" movie on television with the bands at the top and the bottom.

Maybe you are looking for