How to adjust webpages to fully fit the C470 screen

Hi all
Appreciate any guidance on how to adjust the size of a webpage to fully fill the 21.5" screen of C470. Enlarging by Ctrl+ or Fullscreen F11 won't help as the zooming originate from the centre outwards resulting in the truncation of the height of a webpage. Thanks in advance
Regards
kh

Doesn't always work the way you think it should but you could try dropping the Broadcast Safe filter on the entire clip.
You could also just cut the clip where the brightness first appears and add the 3 way Color Corrector. Adjust it to where you like it and then add a disolve between the clips. (may or may not do it for you depending on how the bright spot comes into frame, but it's a fast workaround) Could keyframe the 3 way in if you like.
There are other things you can do with the 3 way to limit it's effect but to get a grip on it you should probably refer to the manual.
rh

Similar Messages

How do I view a website over the full screen while using the 6 plus in horizontal mode

How do I view a website over the full screen while using the iPhone 6 plus in horizontal mod?

You said you found several domain.sites files.
iWeb uses one at a time to create webpages.
Your webpages, your site, has disappeared with MobileMe.
You have to find a new host and publish there.
But to publish you need one of your domain files.
Try iWebSites to open them :
http://www.wyodor.net/_Demo/Aptana/iWebSites.html

HT2907 How do you stop inadvertent contact with the touch screen? Why no Lock Button? Doesn't anyone work out at Apple?? MY Gen 7 also doesn't link to workout equipment automatically like my Gen 6 and I can't stop the bloody voiceover. Any thoughts?

How do you stop inadvertent contact with the touch screen? Why no Lock Button? Doesn't anyone work out at Apple?? MY Gen 7 also doesn't link to workout equipment automatically like my Gen 6 and I can't stop the bloody voiceover. Any thoughts?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

The display on my monitor is too large (can't fit the whole screen on my monitor) even though I have the correct resolution. Suggestions?

The display on my monitor is too large (can't fit the whole screen on my monitor) even though the resolution is correct. Suggestions?

Sounds like it may just be enlarged. Have you tried holding down the <ctrl> key and moving the mouse up and down, or scrolling your finger up and down if you have a magic pad.

How to create Drop down menu in the selection screen

Hi all,
How to create Drop down menu in the selection screen.
Fast answer will be highly rewarded
Regards
Bikas

hi ,
TYPE-POOLS : vrm.
TABLES:vbak,vbap.
DATA : v(80) TYPE c.
DATA: wa_vbak TYPE vbak,
      it_vbak TYPE vbak OCCURS 0 WITH HEADER LINE,
      wa_vbap TYPE vbap,
      it_vbap TYPE vbap OCCURS 0 WITH HEADER LINE.
DATA: l_name TYPE vrm_id,
        li_list TYPE vrm_values ,
        v_count TYPE i,
        l_value LIKE LINE OF li_list.
PARAMETERS: p_test(20) AS LISTBOX VISIBLE LENGTH 60 MODIF ID DAT.
INITIALIZATION.
AT SELECTION-SCREEN OUTPUT.
PERFORM get_data.
LOOP AT it_vbak.
    l_value-key = it_vbak-vbeln .
    l_value-text = it_vbak-vbeln .
    APPEND l_value TO li_list.
ENDLOOP.
CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
      id              = 'P_TEST'
      values          = li_list
    EXCEPTIONS
      id_illegal_name = 1
      OTHERS          = 2.
AT SELECTION-SCREEN ON P_TEST.
clear : li_list , li_list[].
SELECT vbeln
         matnr
         meins
         FROM vbap
         INTO CORRESPONDING FIELDS OF TABLE it_vbap
         WHERE vbeln = p_test.
START-OF-SELECTION.
SELECT vbeln
         matnr
         meins
         FROM vbap
         INTO CORRESPONDING FIELDS OF TABLE it_vbap
         WHERE vbeln = p_test.
LOOP AT it_vbap.
    WRITE :/ it_vbap-vbeln, it_vbap-matnr,it_vbap-meins.
ENDLOOP.
*&      Form get_Data
      text
--> p1        text
<-- p2        text
FORM get_data .
SELECT vbeln
          FROM vbak
          INTO CORRESPONDING FIELDS OF TABLE it_vbak.
ENDFORM.                    " get_Data
regards,
venkat.

Make a picture fit the full screen when published?

I can´t seem to get my picture to fit the full screen when I publish it. There are some alternatives.
To drag the picture into the canvas and enlarge it.
Drag it into the Page background or drag it into the web browser background. Iv tried them all and they look allright in iWeb but there are gaps in every direction when published to the web.

See, that leads us to my second problem. I have a trial period on .mac and when I uploaded some wavs, the disk space quickly ran out. I erased the wavs but the space used is still the same. Is there a way to empty the cache so I dan show it to you.
Thanks for the quick reply, by the way.

How can i stop user to get the same screen while entering same T code

hi experts,
how can i stop user to get the same screen while entering same T code (_Means i want user enter same t code but got different different screen how it is possible.)_
i want to know how can we set a authorization is such a manner ...
Through different different login id user got different different screen while entering same T-code.
for example if there is two functional login id mum & noida...
then user login through that and
enter any same functional tcode (for getting purchase order)
but get different different window...so how come it is possible.....
plz explain in brief
thanks in advance...plz do reply as soon as possible

For a custom transaction this is easy, you need to ask your developers to be able to direct users to different screens based on the results of an authorisation check. You could have an auth field e.g. ZSCREEN which is checked in the program & decides what screen the user has access to.
For standard transactions, unless already coded, I would forget it & do what is recommended by Subramaniam and create transaction variants as required. Assign each variant to a custom t-code and users access it that way.
What I am interested is is why do you want to do this?

How do I duplicate an image on the main screen so that I can edit it and compare the result with the original?

In Elements 12 How do I duplicate an image on the main screen (as well as the photo bin) so that i can compare any editing with the original?

In full Editor, go to Edit>Preferences>General and check "Allow Floating Documents in Full Edit Mode"
Open the image so that you see it in the project bin
Right click the image thumbnail in the project bin, and duplicate. It will come in as xxxcopy
On the Arrange icon at the top, select 2-up. You should see the original and the duplicate in the work area

How do I remove a shortcut from the Home Screen of...

How do I remove a shortcut from the Home Screen of a Nokia 700? I'm a bit clumpsy with the touch screen and I keep adding shortcuts for everyrhing. It's easy enough (too easy) to add them, but how can I remove/delete them? There doesn't seem to be any option to deleting them and it's not mentioned in the manual.
Solved!
Go to Solution.

jimmyireland wrote:
You tap the icon hold for a second or two the x icon appears then you tap it then it goes
Now I got it. Thanks for the help.
I really need to practice this touch screen malarky, I'm not very good at it.

We just got a new phone for my daughter. I am trying to restore from itunes account but the language is not English. How do I restore to English from the Hello screen?

We just got a new phone for my daughter. I am trying to restore from itunes account but the language is not English. How do I restore to English from the Hello screen?

WHen in the setup part the first question after hello should be language

How do I stop those effects in the video screen?

How do I stop those effects in the video screen?
cube spins, pictures popping up, etc.
I've looked in all the menus and in iChat Help, but I can't locate the off button.
thanks,
Richard
G5 dual 2 gig Mac OS X (10.4.6)

Hi Richard,
Is this a camcorder ?
If so it is from the camera in demo mode.
You need to set it to Camera mode with the tape out like you were going to strat recording.
You would use the same feed to record direct to a VCR on use a TV as monitor.
5:59 PM Sunday; April 16, 2006

How Keeping Batch Live Trace To Fit The Original Picture's Size

to create a Live Trace movie Illustrator suddenly opens up a larger artboard than the actual picture to be live traced, and saves the result with this too large artboard size, so when I import it as an .ai sequence in After Effects, it's an over sized picture that is squeezed down to fit the After Effects composition. Any hint how I can avoid this I'd be grateful for.
regards,
frank

Hi Monika, thx for reply. Ya, suddenly because it didn't do it before. before the original images size was the sithe the live-trace-created .ai was opening with when I imported it to After Effects.
It probably is in conjunction with the pictures size and the size defined in the live-trace-tool from the adobe-bridge. When the picture was 640 x 30 and the output set to 1280 x 720 then the problem occurs. When the picture is 1280 x 720 and the output is set to the same values, then it opens up in After Effecs as desired, direct into place within the 1280 x 720 in After Effects.

How do I have a page fit the screen without having to zoom in every new tab?

Wen I open a new window/ tab, the page is in VERY small fonrt and centred in the middle of the page and I must zoom in to have it fit the page as it did before and should.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages
You can use one of these extensions to adjust the default font size and page zoom on web pages:
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592

How do I make a page fit the screen automatically

How do I make the Safari page fit the screen automatically

Try keyboard shortcut Control+Command+F (^⌘F)

How to adjust brightness of part of the screen of shot video

Hi,
I have a video I am editing and for the most part the brightness and contrast levels are fine. But when I pan to a LCD display which is part of the video, the brightness is way too high. I can't redo this clip, but am wondering if there is a reasonable way to apply a filter which just lowers the intesity of the LCD screen while leaving the surrounding areas alone. It would sort of be like the concept they chroma keying does (in a loose sort of way).
thanks!
'mark

Doesn't always work the way you think it should but you could try dropping the Broadcast Safe filter on the entire clip.
You could also just cut the clip where the brightness first appears and add the 3 way Color Corrector. Adjust it to where you like it and then add a disolve between the clips. (may or may not do it for you depending on how the bright spot comes into frame, but it's a fast workaround) Could keyframe the 3 way in if you like.
There are other things you can do with the 3 way to limit it's effect but to get a grip on it you should probably refer to the manual.
rh

How to adjust webpages to fully fit the C470 screen

Similar Messages

Maybe you are looking for