How to Align Message Check Box in OAF .

Dear Friends ,
I have a two check box created under "Message Component Layout " region , but by
default it's get created at left side of the page , but i would like to align it to center of the
page .
I have tried setting up the vertical alignment in the property inspector to " Middle" .
but it did not work .
How this can be achieved ?
Thanks in Advance ,
Keerthi.k

user1140193 wrote:
Dear Friends ,
I have a two check box created under "Message Component Layout " region , but by
default it's get created at left side of the page , but i would like to align it to center of the
page .
I have tried setting up the vertical alignment in the property inspector to " Middle" .
but it did not work .
How this can be achieved ?
Thanks in Advance ,
Keerthi.kDid you tried creating a messageLayout Region under messageComponentLayout and then creating messageCheckBox under it.
Thanks
AJ

Similar Messages

  • How to create a message check boxes group dynamically in OA Framework

    Hi all,
    I am developing a custom OAF page. It is a master-detail page. And I am having some difficulties to build that.
    Firstly, I need to create a dynamic message check boxes group. These check boxes will get the prompt from a standard database table's column. Let's say I have table X with description column and it has 7 rows. Values of description column are A,B,C, ...etc. Then my master region on the page will have 7 check boxes with the prompts of A,B, C... Check box number will depend on the row/rows that this table has.
    The other requirement is to create master and detail rows that depends on the number of any checked check boxes. If 2 check boxes are checked then we need to create 2 rows of master data and detail data too.
    Does any of you have any ideas or suggestions to do that?
    It is urgent, any help would be appreciated.
    Thanks in advance and regards
    PS: Is it possible to do that? Can anyone put some light on this thread please?
    Edited by: user1742330 on Aug 12, 2012 4:23 PM

    Please help me out with this issue...
    I am in a very urgent situation. Any idea about this thread???

  • I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 on a Mac. Anyone know how to get it back?

    I don't seem to have an align/unalign check box option anymore for tools like the clone and healing brush. PS CC14 Anyone know how to get it back?

    Sounds like you have the Narrow Options Bar enabled
    Photoshop>Preferences>Interface

  • About gr message check box in me21n

    Please any one can explain the purpose of the field gr message check box in the header part in the delivery invoice tab page while creating purchase order t-code me21n
    regards and thanks
    satya

    HI.
    Sathya
    We are required this same scenario
    Can u please know how to do GR message setup..
    How u did it.
    Regards
    Sk

  • How to name the Check Box as "Want Free Gift" using PARAMETERS statements

    Hi all,
    I am new to check boxes. I have a existing report where I have to add a check box to the selection screen.
    So i said
    PARAMETERS: p_cncldc AS CHECKBOX.
    everythibng is fine and I get the check box on the selection screen. when i execute the report i get the name of check box as p_cncldc. but i want the name of the check box as "Want Free Gift".
    How to name the check box as "Want Free Gift".
    if i am saying
    PARAMTERS: Want Free Gift AS CHECKBOX. it says a syntax error saying it canot be more that 8 chars.
    Some one please help. I am new to Check boxes
    Regards,
    Jessica Sam
    Edited by: jessica sam on Mar 31, 2009 10:37 PM

    Text on the Right hand side of check box.
    selection-screen begin of block b1.
    selection-screen begin of line.
    parameters: w_check as checkbox.
    selection-screen: comment  4(30) TEST .
      selection-screen end of line.
    selection-screen end of block b1.
    INITIALIZATION.
    test = 'Want Free Gift AS CHECKBOX'.
    Text on the Left hand side of check box.
    selection-screen begin of block b1.
    selection-screen begin of line.
    selection-screen: comment  2(30) TEST .
    parameters: w_check as checkbox.
      selection-screen end of line.
    selection-screen end of block b1.
    INITIALIZATION.
    test = 'Want Free Gift AS CHECKBOX'.
    OR:
    GOTO(Menubar)>Text Elements>Selection Texts
    Regards,
    Gurpreet

  • How to activate the Check box in Purchase Order after Goods Receipt

    Hi All,
    How to activate the check box after Goods receipt of Purchase order in Item view (Goods Receipt is completed).
    Where t make the settings in SPRO.
    Regards,
    Shailendra Hadkar

    Hi
    SPRO - SAP IMG- Material management - Inventory management and physical inventory - Goods receipt - create purchase order automatically - activate auto Po creation for movement type.
    Then activate the auto PO creation in Vendor master - Purchasing view
    Check it out.
    Regards,
    raman

  • How to handle the check box in the alv tree display

    Hello,
    in my ALV Tree Report i have a check box in the output.
    I have one check box in the selection screen as select all .
    if this is selected then all the check boxes in the output must be selected that is (X).
    am using CL_GUI_ALV_TREE  for this.
    Please give me some input how to make that check boxes 'X' in the above mentioned case.
    With Regards,
    Sumodh.P

    Sumodh,
    check this
    Re: Select all checkbox in ALV tree
    please search before posting
    Thanks
    Bala Duvvuri

  • How to get a check box on the selection screen

    Hi all
    can any body tell me how to get a check box on the selection screen

    parameter: pa_check   as checkbox.
    To define the input field of a parameter as a checkbox, you use the following syntax:
    PARAMETERS <p> ...... AS CHECKBOX ......
    Parameter <p> is created with type C and length 1. In this case, you may not use the additions TYPE and LIKE. Valid values for <p> are ' ' and 'X'. These values are assigned to the parameter when the user clicks the checkbox on the selection screen.
    If you use the TYPE addition to refer to a data type in the ABAP Dictionary of type CHAR and length 1 for which 'X' and ' ' are defined as valid values in the domain, the parameter automatically appears as a checkbox on the selection screen.
    REPORT DEMO.
    PARAMETERS: A AS CHECKBOX,
    B AS CHECKBOX DEFAULT 'X'.

  • How to default a check box?

    Hi,
      How to default a check box?
    Regards,
    Jaya

    Hi
    DATA :
       w_c type c value 'X'.
    WRITE :
       w_c as CHECKBOX , 'XYZ'.
    Regards
    Pavan

  • How to keep a check box in script

    hi
    how to keep a check box in script

    Hi,
    go to sapscript editor
    Change the editor to 'PC Editor' and take the menu.
    Include -> Characters -> SAP Symbols
    whether this will not be visible in the print preview.
    other wise..
    Just keep it like <697> in your text element.
    Telephone <697> : &W_TAB-TEL&
    Corresponding symbol will be printed in the paper.
    Note: It will not be displayed in the print priveiw.
    Regards,
    Shiva k

  • How to create a check box that can be unchecked

    How do I create check boxes that can be checked and the unchecked in Forms Central?
    For example, if you accidentally check a box - you want to uncheck it. Right now it doesn't allow you to do that.
    please help.
    Thanks
    Gen

    Are you sure you're not using radio buttons? Check boxes behave the way you'd expect for me with a form generated by FormsCentral.
    I'm going to move this to the FormsCentral form since the team there may want to take a look at the form.

  • How can I take check box in particular cell of the table in smartforms??

    Hi experts,
       pls tell me how can I take check box in particular cell of the table in smartforms??
    It is not interactive form.
    I hv taken small windows as check boxes.but i think it is not a proper solution....give me another solution...

    Hi,
    first create text for a particular cell.
    In that we have a  text editor  in that text editor we have symbols in include menu.
    whatever the symboll u want to put to ur cell . just assign it.
    please check it. if it helpful reward points.
    regards,
    satish.

  • How to display that Check Box In Down of Tabular Rows .

    Dear Friends,
    i have created tabular form and one check box Item in that region.
    i want to display that checkbox Item after tabular form Rows .
    How to display that Check Box In Down of Tabular Rows .
    Thanks

    Hi,
    From report attributes, you can change column order
    http://download.oracle.com/docs/cd/E23903_01/doc/doc.41/e21674/bldapp_rpt.htm#sthref1348
    Regards,
    Jari

  • How to select One Check Box at a time

    Dear All
    I have 10 records in details blok and also I have 10 check boxes .
    I want user can only check one check box at a time .
    For example If first record I have checked and i am trying to check the last record then the first record UNCHECKED and the last record will checked .
    Like how redio buttons work ..
    How can i do that ..?
    I have done like this :-
    1st I have declare a global variable in PRE_FORM :GLOBAL.CNT := 'N';
    Then
    WHEN-CHECKBOX-CHANGED trigger
    IF CHECKBOX_CHECKED(EMP.CHK') THEN
        IF :GLOBAL.CNT != N THEN
            :EMP.CHK := Null
       HERE what to write ???
            RAISE FORM_TRIGGER_FAILURE;
        ELSE
            :GLOBAL.CNT := Y;
        END IF;
    ELSE
        :GLOBAL.CNT := N;
    END IF;Edited by: LuKKa on Aug 29, 2012 1:12 PM
    Edited by: LuKKa on Aug 29, 2012 1:13 PM

    LuKKa,
    An easier method would be to use a Calculated Field to summarize the value of your CHECKBOX Item. For example, add a non-table item (call it SUM_CHECKED) to your detail block and do not assign it to canvas - so it will not be displayed. Then set the following properties of the SIM_CHECKED item:
    Database Item = No
    Calculation Mode = Summary
    Summary Function = Sum
    Summarized Block = <YOUR DETAIL BLOCK>
    Summarized Item = <YOUR CHECKBOX ITEM>
    Next, you will need to change your Detail Block property Query All Records to YES (this is required for the Calulated Item).
    Now, make sure your checkbox is data type NUMBER and has the following minimum properties set:
    Data Type = Number
    Maximum Length = 1
    Initial Value = 0
    Value when Checked = 1
    Value when Unchecked = 0
    Check Box Mapping of Other Values = Not Allowed or Unchecked
    Now, in your Checkbox Item's When-Checkbox-Changed trigger add code similar to this:
    IF ( CHECKBOX_CHECKED('YOUR_DETAIL_BLOCK.YOUR_CHECKBOX_ITEM') ) THEN
       IF ( :YOUR_DETAIL_BLOCK.SUM_CHECKED > 1 ) THEN
       --Reset the checkbox
       :YOUR_DETAIL_BLOCK.YOUR_CHECKBOX_ITEM := NULL;
       MESSAGE('You can only check one item.');
       Message(' ');
       RAISE Form_Trigger_Failure;
       END IF;
    END IF;I have confirmed this method works and it is more efficient than looping through your records to see if other checkboxes are checked.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

  • How to select the check box automatically

    Hi All,
    I'm using forms 6i.I have 3 check boxes.If i Select the 2nd and 3rd check box then the fist check box should be selected automatically.The 2nd and 3rd check boxes are mutliarray block attached to each other while the !st check box is not attached to them. while Can someone please tell me how to write the code for this?
    With Regards,
    Gowtham
    Message was edited by:
    Gowtham1232
    Message was edited by:
    Gowtham1232

    It's not very clear, but I think that having a WHEN-CHECKBOX-CHANGED trigger on checkbox2 and checkbox3 that says
    IF :checkbox2 = 'Y' and :checkbox3 = 'Y' THEN
      :checkbox1 := 'Y';
    ELSE
      :checkbox1 := 'N';
    END IF;assuming 'Y' is the checked value of each checkbox and 'N' the unchecked.

Maybe you are looking for