How to align text in margin with text in document
I am using InDesign CS3 and am trying to figure out how to add text to the left of my document where there are figures and tables (so I can later create a table of figures and table of tables). I cannot get the text "Figure 1", "Figure 2", etc. to line up horizontally in the left margin with the figure I placed in the center of the document. What am I doing wrong?
> What am I doing wrong?
It's hard to say what you're doing wrong without first knowing what
you're doing. How are you trying to line up text with figures? In what
way does it not work?
Kenneth Benson
Pegasus Type, Inc.
www.pegtype.com
Similar Messages
-
CAN Text Box/Shape with Text on top of Flash?
Hi,
i'm wondering, Do the Text Box/Shape with Text posible to put on top of the Flash?Do it able to read the Text after published?
I'm scratching my head...Safari Have no problem to read it but Windows user can't read the text.
Any idea?OGC Management wrote:
... if I checked the invert box it corrected the problem!
your going to chase your tail with that "solution".
Select all (ctrl+a)(cmd+a) and set Text Wrap to none as shown.
The item could be on a master page or a locked layer, but you indicate you were able to modify the wrap attributes... -
How to make textframe go down with texts.
Hi All:
There are two parallel textframes in my page, TF_1(at left) and TF_2(at right), and there are another two textframe TF_3 and TF_4, two tables,TB_1(in TF_3) and TB_2(in TF_4),
TF_2 is too narrow to place TF3(with TB_2) , so I wanted to move TF3 a little to the left , but when I moved it, TF_4 (with TB_1) did not go down with texts, how to resolve this?
See attachment, please.
http://www.fileden.com/files/2008/5/29/1934968/32.zip
Thanks in advance.Hi Frekfeng,
You can move the text frames with:
var myDoc = app.activeDocument;
var myTextFrame = myDoc.textFrames.item("TextFrame01")
myTextFrame.geometricBounds = ["10mm", "10mm", "287mm", "200mm"]; // A4 page
You can get the text frame to expand with:
function resizeOverset() {
myStories = myDoc.stories;
for (var j = myStories.length - 1; j >= 0; j--) {
if (myStories[j].overflows == true) {
myLastFrame = myStories[j].texts[0].parentTextFrames[myStories[j].texts[0].parentTextFrames.length - 1];
myLastFrame.fit(FitOptions.FRAME_TO_CONTENT);
Brett -
How to create a picture presentation with text ?
I need to create a 2 minutes video of a Bus rental company, the video has to be created with pictures text and voiceover, the text will be the subtitle of the voiceover so that the video can also be used without audio...
I would like to make it in FCPX but I never worked with pictures in video, is there any cool plugin that you know or any particular method to create nice slideshows in FCPX ??
Any other suggestion is welcome.
Thanks a lot !I'm not familiar with any slideshow plug-ins compatible with FCPX and a quick search didn't turn up anything very promising.
But FCP itself has plenty of capability for creating multimedia projects like this. Keyframing is pretty straight forward (easier than the old FCP) and gives you plenty of control over timing of moves and effects. And you should be able to use the stock titling tools to do your sub titling.
Another approach would be to use iPhoto or Aperture (or some third party photo editor) to make your slideshow. (You could use one of the photo editor slideshow templates if one of them appeals to you.) Then export the slideshow as a Quick Time movie and bring that into FCP to edit your audio and subtitles into the presentation. Keynote could also be used like this.)
Finally, if you are (or can get) comfortable working in Motion, you can create compositions that will be both and impressive and unique to your client.
Good luck.
Russ -
How can I turn off Respond with text option on iphone 5s
I would like to disable the respond with text option, several times while taking the phone out of my pocket I responded to call I wanted to answer
Try this:
Go to Settings/General/Passcode lock/ Allow access when locked/disable
Reply with message -
How to send an group email with text and photo with out having google trash it
how to send a group email with imac 21.5 8.1 Yosemite gmail without having it trashed automatically
Check the settings on the machine(s) that are trashing it.
-
How to associate a test message with a change document
I am using solution manager 7.01.
accessing my change documents through the workcenter I need to create a new test message - so I use the Create transaction button on the button bar, Service Process, Test Message
Then I am in the create test message screen. However from here I cannot see how to associate my test message with either the change document that I was processing or to the maintenance cycle.
Ideally I want to link the test message to the change document however at least to the maintenance cycle.
How do I do this?
Am I creating the test message in an incorrect way?
regards
MarinaAnyone? Does no one use Test Messages?
-
How to populate internal table field with text data?
Hello Experts,
I was able to load text file to a internal table but data is not populating each field. Can someone help me how to populate each field of internal table from text file?
Here is the text file:
io_name, io_type, io_txsht, io_txlng, io_datatype, io_length
ZEA_IO1, CHA, IO Test, IO Test 1, CHAR, 20
ZEA_IO2, CHA, IO Test, IO Test 2, CHAR, 20
Here is the Code:
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = SPACE
HEADER_LENGTH = 0
DAT_MODE = SPACE
CODEPAGE = SPACE
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
READ_BY_LINE = 'X'
IMPORTING
FILELENGTH =
HEADER =
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
I appreciate your help.
Regards,
MauI have used tab delimited file.
Here are file contents
io_name io_type io_txsht io_txlng io_datatype io_length
ZEA_IO1 CHA IO Test IO Test 1 CHAR 20
ZEA_IO2 CHA IO Test IO Test 2 CHAR 20
And here is program used
*& Report ZAS_BAPI_TEST *
*& InfoObject Creation through BAPI.
*& Read the Text file, call a BAPI to create InfoObjects. *
*& Text file will hold the Info Object Structure. Text file will be *
*& located either work station or local PC.
*& Step 1. Create internal table to hold InfoObject structure *
*& Step 2. Retrieve/Load text file into Internal Table structure *
*& Step 3. Call BAPI Function to Create IO *
*& Step 4. Call BAPI Function to Activate IO *
REPORT ZAS_BAPI_TEST .
Make data separator a comma
CONSTANTS: gc_tab TYPE c VALUE ','.
Declaring Internal table for creating InfoObject
DATA: p_file TYPE string.
DATA: BEGIN OF itab-bapi OCCURS 0,
io_name like BAPI6108-infoobject,
io_type like BAPI6108-type,
io_txsht like BAPI6108-textshort,
io_txlng like BAPI6108-textlong,
io_datatype like BAPI6108-datatp,
io_length like BAPI6108-intlen,
END OF itab-bapi.
DATA ibapi LIKE STANDARD TABLE OF itab-bapi.
PARAMETERS: sel_file(1500) TYPE c default ' ' OBLIGATORY LOWER CASE.
PUT THE TEXT FILE PATH TO P_FILE
p_file = sel_file.
Copy the file from the workstation to the server ****
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = p_file
<b>FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'</b>
TABLES
data_tab = itab-bapi[]
EXCEPTIONS
file_open_error = 1
file_read_error = 2
no_batch = 3
gui_refuse_filetransfer = 4
invalid_type = 5
no_authority = 6
unknown_error = 7
bad_data_format = 8
header_not_allowed = 9
separator_not_allowed = 10
header_too_long = 11
unknown_dp_error = 12
access_denied = 13
dp_out_of_memory = 14
disk_full = 15
dp_timeout = 16
not_supported_by_gui = 17
error_no_gui = 18
OTHERS = 19.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
MESSAGE e012(zea_spms) WITH 'Method' 'GUI_UPLOAD' sy-subrc.
&1 &2 issued return code &3
ELSE.
pit_data[] = lit_data[].
ENDIF.
ENDIF.
loop at itab-bapi.
write: /5 itab-bapi-io_name,
20 itab-bapi-io_type,
30 itab-bapi-io_txsht,
50 itab-bapi-io_txlng,
75 itab-bapi-io_datatype,
85 itab-bapi-io_length.
endloop.
SELECT THE LOCATION FOR TEXT FILE
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_file.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ''
def_path = 'C:\'
mask = ',Documentos de texto (*.txt), *.txt.'
mode = ''
IMPORTING
filename = p_file
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
find '.txt' IN p_file.
if sy-subrc <> 0.
concatenate p_file '.txt' into sel_file.
else.
sel_file = p_file.
endif.
Create InfoObject through BAPI Function
*CALL FUNCTION 'BAPI_IOBJ_CREATE'.
*IMPORTING
VALUE(DETAILS) LIKE BAPI6108 STRUCTURE BAPI6108
*EXPORTING
VALUE(INFOOBJECT) LIKE BAPI6108-INFOOBJECT
VALUE(RETURN) LIKE BAPIRET2 STRUCTURE BAPIRET2
TABLES
COMPOUNDS STRUCTURE BAPI6108CM OPTIONAL
ATTRIBUTES STRUCTURE BAPI6108AT OPTIONAL
NAVIGATIONATTRIBUTES STRUCTURE BAPI6108AN OPTIONAL
ATRNAVINFOPROVIDER STRUCTURE BAPI6108NP OPTIONAL
HIERARCHYCHARACTERISTICS STRUCTURE BAPI6108HC OPTIONAL
ELIMINATION STRUCTURE BAPI6108IE OPTIONAL
RETURNTABLE STRUCTURE BAPIRET2 OPTIONAL
Activate InfoObject through BAPI Function
CALL FUNCTION 'BAPI_IOBJ_ACTIVATE_MULTIPLE'
*ENDFORM. " RETRIEVE_DATASET
This program is working fine. You can test it.
Only problem is as the column headings are big for some columns, they are getting truncated which you can always change by changing the column width in declaration
Please let me know if this helps.
ashish -
How to align output formatted and output text in the same line?
Hi All,
I want an output formatted label and a text on the same line,. I've surrounded these components wth a panel form layout and they automatically align one below the other. how do I kepe them in the same line?
Thanks.Try as per the code snippet below:
<af:document title="TestPage.jspx" id="d1">
<af:messages id="m1" inline="true"/>
<af:form id="f1">
*<af:panelGroupLayout id="pgl1" layout="horizontal">*
*<af:outputFormatted value="outputFormatted1" id="of1"/>*
*<h:outputText value="outputText1" id="ot1"/>*
*</af:panelGroupLayout>*
</af:form>
</af:document>
Thanks,
Navaneeth -
How do I count changed words with text insertions & deletions
I have a pdf and I'm going through using Adobe Reader to mark sentences as deleted, and adding text etc. Is there any way to get a word count of the document with the deleted sections removed from the count and the text insertions added to the word count?
Thanks. I feared that. The problem is that I have upwards of 1000 comments, some of which are single word deletions and some of which are deletions of >1000 words, so it will be a hassle going through and counting. Is there some way to parse the xfdf file to count the number of deleted words (I can't figure out how, from a cursory inspection of the xml)
-
How to align Hgrid column(messagestyledtext) header text to right justified
Hi All,
I have a Hgrid table and i am using five columns in hgrid table.. I need to display column header text right justified. but by default it is left justified.
Can any one tell me how to do it..
Its very urgent.. Please help me out..
Regards,
BabuUse
OAHGridBean GeneralHgrid=(OAHGridBean)webBean.findChildRecursive("<hgrid item name>");
GeneralHgrid.prepareForRendering(pageContext);
DataObjectList tableColumnFormats =GeneralHgrid.getColumnFormats();
DictionaryData tableColumnFormat = (oracle.cabo.ui.data.DictionaryData)tableColumnFormats.getItem(pageContext.findChildIndex(GeneralHgrid, "<item id of item attached in hgrid column>"));
tableColumnFormat.put(COLUMN_DATA_FORMAT_KEY, <enter format>);
see below:
�� TEXT_FORMAT (textFormat)- column content is Start justified.
�� NUMBER_FORMAT (numberFormat)- column content is Right justified.
�� ICON_BUTTON_FORMAT (iconButtonFormat)- column content is center justified.
--Mukul -
How to associate other file extension with text/xml
Hi,
I found that I could only load files into XDB via ftp when they had the file extension ".xml". Why is this?
Thanks
PeteThe information as to which file extensions are associated with which mime-types is stored in the xdbconfig.file. You can add an entry using the following code
connect system/oracle as sysdba
call dbms_xdb.cfg_update
updatexml
dbms_xdb.cfg_get(),
'/xdbconfig/sysconfig/protocolconfig/common/extension-mappings/mime-mappings',
xmlelement
"mime-mappings",
xmlconcat
extract
dbms_xdb.cfg_get(),
'/xdbconfig/sysconfig/protocolconfig/common/extension-mappings/mime-mappings/mime-mapping'
xmltype
'<mime-mapping xmlns="http://xmlns.oracle.com/xdb/xdbconfig.xsd">
<extension>rdf</extension>
<mime-type>text/xml</mime-type>
</mime-mapping>'
commit
call dbms_xdb.cfg_refresh()
set long 1000000
set pagesize 0
select dbms_xdb.cfg_get() from dual
quit -
How to send URL link along with text in an email using FM.
Hi Experts,
I am sending an e-mail for status notifications.
In the mail, the user will clik on the URL to do actions through the link.
Ex:
Dear,
Please go through the link htttp://appear.upload/records/update.
When user clicks on htttp.... url it should open the portal.
I am sending text mails but unable to open the site url action .
Regards,
prasadHi ,
Pls check below link.
http://wiki.sdn.sap.com/wiki/display/ABAP/SendingMails-HomePage -
How do I create a form with text fields that can continue to multiple pages with out it over lapping
I have created a form in Livecycle and have made every object a sub field. But I am still having the same probably. The text field only continues on to a second page and overlaps the footer I have created at the bottom of the page. I am new to livecycle and have tried a lot of different things to fix this problem. Help would be greatly appreciated.
Hi,
I've found this blog http://blogs.uoregon.edu/developments/2010/12/29/pdf-making-text-fields-grow-to-accommodat e-text/ and this example file : flowableTest.pdf? Is it close to what you search? I cannot go deeper into example now, but will. -
How do I fix the problems with text formating functions in hotmail and other text based sites?
In a Mailing list provider site it disables the text formating functions, instead only showing a 'loading' message. The functions never appear. In Hotmail the scroll arrows on the right hand side does not work. Sometimes the email toolbar becomes 'grey' and the buttons do not work. When forwarding an email sometimes the email does not show in the new email message.
== This happened ==
Every time Firefox opened
== Firefox was reinstalled March 2010.The only possible fix was turning the phone off immediately and burying it in a bag of dry rice for a week at least. That might...just might...have worked. But you're way beyond that and I see no fixes. In fact the phone is probably going to get more problems before finally gving up the ghost. Continued use is just shorting out more and more of the circuitry. For that reason I don't think repair is much of an option. Go to an Apple Store and buy an out-of-warranty replacement.
Maybe you are looking for
-
Windows can't find photoshop.exe
I had CS5, Worked well for like 1 month, then, I had this problem so I tried installing CS6 (I STILL HAVE CS5) and the same with CS6. Not only photoshop, I can't open any ADOBE's applications. PLEASE HELP ME!
-
HI All, There is a requirement to popuate the Header text of a sales order, When the item -VBAP-POSNR for example : item 20,50,70 has beyond deliver date then I have to populate the header text as - 'Item 20,50,70 has beyond deliver date'. For this
-
Firefox uses too much CPU ff3.6.3 any HELP?
Firefox uses way too much CPU. Running MAC OSX and ff 3.6.3 using "activity monitor" shows Firefox uses typically 96% of my CPU !! == This happened == Every time Firefox opened == I noticed my computer was getting s- l -o w- e -r
-
Several months ago I installed pulseaudio and it worked fine at first glance. Then I discovered that when there multiple users active, sound is only available to first user who captured soundcard:). After I read www.freedesktop.org/wiki/Software/Puls
-
Hi All I picked asset number 15635 and ran a retirement simulation on. The asset has posted depreciation thru July with a NBV value of $15,510.21 When I used an Asset Value Date of 07/10/10 to retire this asset the loss generated is $15,510.21. Whe