How to align two charts vertically

I have two charts in my application.
Need to align left vertical axes of both the charts. If axis labels of the charts are of same size then are aligned properly but when any of the axis labels increases in size then alignment is not mentained..
Any help is highly appreciated.. Please
Thanks in advance!!

Actually I have got the way............. There is property for every chart 'gutterLeft' which can set to same value for both the charts.
and they will be aligned vertically.... By aligning vertically i meant the charts should be in a  position to share a horizontal axis.. vertical axes should be at same x position.
Thanks.

Similar Messages

  • How to include two charts in one web template

    I need to dispaly two charts which are based on same query and on characteristic 1 vs KF's and the other on characteristic 2 vs KF's in one web template.
    How can this be done?
    Thanks in advance,
    Murali.

    When you execute the query in the bex analyzer, perform th enavigation stpes to reach to your desired layout of data. Then from the Save button on the bex toolbar, choose Save > Save View Global. Give it a technical name and  a description. Then log back into the WAD and assign the view as the data provider (Note there are 2 buttons over there: One for query and the other for View)
    Hope this helps...

  • How to align the text vertical in the edit box in mfc?

    Hi,
    I had an edit box of which height is increased than the default.Now the problem here is when I am entering text into the edit box the text is not present at the centre of the edit box, It is still aligned at the top.
    After increasing the height of the edit box the text and cursor are aligned at the top as shown in the below figure.
    But Actually how I want is the text and the cursor position needs to be aligned centre as shown in the below figure.
    Note: "EDITTEXT        IDC_EDIT_BOX,10,73,156,14,ES_AUTOHSCROLL"
    Can anyone please help me how can I make the text and the position of the cursor to be aligned vertically i.e, to the centre of the control.
    SivaV

    If vertical alignment is not possible, then use an edit box without borders, having the default height, and place it inside a static control having
    SS_WHITERECT style. (In MFC Dialog Editor, set the Type and Colour properties). Both of controls will be children of dialog. Use a proper tab order. Check if the style
    WS_CLIPSIBLINGS is needed too.

  • How to align two 3D meshes

    I have two slightly different 3D meshes (same size, different textures, slight modifications to the mesh) that I need to be precisely aligned in 3D space (which I will convert to raster layers and then manipulate).
    I tried importing the one mesh (an OBJ file) and manipulating its orientation, then duplicating it, then in the duplicate layer replacing the mesh with the second mesh. The problem is that the second mesh always goes into the default orientation.
    How can I align the two meshes (each in a different) layer to have the same orientation in 3D space?
    I am running the latest Photoshop CC

    I have only played with 3d a little bit.  In you case I would first try getting the two 3D objects into photoshop making no adjustment at all.  Then use the properties panel for both 3d objects to reset their coordinates.  Then select both 3d  object layers and merge the object into a single 3d layer. Then manipulate their position and sizes in respect to each other.

  • How to add two X Axis in the Column chart?Need Help

    Hi,
    I have a requirement to add two X axis in the SSRS column chart.Can someone please help how to add two X axis. I tried the secondary axis for horizontal axis but current x axis is shifting to other side, second X axis is not coming.
    Regards
    Jon

    Hi Jon,
    According to your description, you want to add secondary X axis for one series in a column chart, right?
    The secondary axis is useful when comparing two value sets with two distinct data ranges that share a common category. In Reporting Services, it’s not supported to create two X axis for one series. We can create secondary X axis when there are two series
    in a column chart. As we tested in our local environment, we can add secondary X axis for specific series. Please refer to the screenshots below:
    So I would like to know what’s your exact needs about creating two X axis for one series. If possible please share some detail information about your data and expected looking of the chart.
    Reference: Plot Data on a Secondary Axis (Report Builder and SSRS)
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu

  • Dev 6.0: How to align center VERTICALLY ?

    Hi !
    When I increase a height of the row I can't align data center
    vertically. Only horizontally.
    Hint me, please, how to do it.
    null

    I have stored/Retrieved Word documents in Oracle using a utility
    that comes with the ConText Option. Essentially I wrote PL/SQL
    to run the utility to get the file out of DB and onto the hard
    disk, then another PL/SQL to run the utility to move the file
    from hard disk into DB. I think the name of the utility was
    txtio. I hope this helps.
    -- Amir
    kal (guest) wrote:
    : Andrei,
    : I think mine is different problem like yours. But I want to
    : save the web reports I mean it can be either in html format or
    : PDF format..can I save these are .xls and then load into excel.
    : I tried that but what all I get is the html code but not the
    : output of the report.
    : I think you might have faced this kind of problem. Please
    : let me know if you have any answer. Coming to your question
    : I need to check that.
    : Thanks in advance.
    : kal
    : Andrei Kvasyuk (guest) wrote:
    : : Hi !
    : : Please, give me any hint about how to store MSWord (Excel)
    : : documents in database from Oracle Forms ? In other words, is
    it
    : : possible to edit documents in MSWord and then save (load) it
    in
    : : (from) database ?
    : : Thanks.
    null

  • How to align these two divs next to eachother and center page?

    Hey Guys
    I am wanting to align two div's together and center them on the page. Any help in doing this would be great. Whenever I set them to float right or left itt'l just go elsewhere on the page... It's the two "caption" div's.
    I dunno how to insert code here but website is currently vieweable here
    http://adamdowning.net/rotherhamphoenixcc/team.html

    Hi desertdame,
    As Peter said, make a dummy booklet.
    two pieces of paper  8 half pages with each one approx 8 x 5.5  when an 8 1/2 x 11 is folded in half and made into a booklet.
    I think this arrangement will work:
    That is a screen shot of thumbnails. I used:
    File > New From Template Chooser > Page Layout > Catering Brochure.
    Then I deleted the content to leave just a text box on the left and right of each page.
    Regards,
    Ian.

  • How can I insert a vertical line  between two underlined unfilled with text lines.  I am trying to construct an invoice and I need a break.  If I try any of the shapes or inset functions it eliminates my underlined lines and shifts the whole document.

    I am trying to construct an invoice.  How can I install a vertical line between two or more underlined lines to create a break.  I have tried the insert, shapes and nothing works.  If I try any of the functions the whole document shifts to the right and I loose some of the lines.  Is there a work around, or is I work not able to do what I want?   
    Thanks
    Armand

    It sounds as though you may have "Object Causes Wrap" activated for the Line Shape. This will push other content away.
    See the Wrap Inspector.
    Jerry

  • How to display two waveforms in one waveform chart?

    hellow!anyone can tell me how to display two waveform together in one waveform chart? thanks!

    Hello,
    An easy way to tell how to make multi-plot charts and graphs is to hold your mouse over the chart/graph terminal on the block diagram and make sure Context Help (Help >> Show Context Help) is enabled. This screen will tell you how to connect the indicator for a multiple-plot display.
    You might want to take a look at my attached screenshots of a working multi-plot chart.
    Hope this helps!
    Liz F
    National Instruments
    Attachments:
    Multi-plot_chart.bmp ‏902 KB

  • How can I link two charts on different pages in one document?

    I have a chart on the first page How cn aI link two charts on differnetof my document. The last line is a intermediate total (formula). How can I link the chart on the next page to this total, so I can go on with the calculation without having to copy and paste the result of the first chart?

    Timan,
    I'm sure that you could figure out how to get along with Pages, or Numbers. Each has it's own advantages and disadvantages.
    If you put all your text that doesn't need to be in the table into text boxes, you can place the text boxes over the table in any arrangement you like. Be sure to turn off Object Causes Wrap in the Wrap Inspector.
    Here is an example of a single table across two pages with other text on the page:
    The formula in the cell displaying 500 is =B1 * 100
    On the other hand, I agree that the feature of linking to sister tables would be a nice enhancement and I encourage you to submit the idea vie Pages > Feedback > Enhancement Request.
    Regards,
    Jerry

  • How to do consolidation using two chart accounts with different currencies

    Hi
    How to do consolidation using two chart accounts with different currencies and do we need to use same fiscal year variant ?
    What would be the impossible factors when we use two company codes with two chart of accounts ...
    Regards
    Kesharika

    Good Afternoon
    You need to use translationa and/or valuation
    translation takes account in foreign currency and translates to group currency
    valuation takes account in currency 1 and restates into currency 2 for a company with currency 2
    so depends on which company you are consolidating for, a company in a foreign currency in that currency or consolidating a compnay in foreign currency to parent company in another currency

  • How to align footnotes vertically to each other ?

    In IDCS5 I want to align two footnotes so it begins at the same height point.
    Thanks

    Ah yes - you cannot get Footnotes to Span Columns - it's very frustrating and I'v been campaigning for this feature since CS2
    Please join the cause http://forums.adobe.com/message/2744922#2744922
    For now you will have to make them endnotes and manually sit them across two columns.
    Here's a script that converts indesign footnotes to endnotes (as InDesign can't do that either - http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1345518)
    How to install and use scripts http://indesignsecrets.com/how-to-install-scripts-in-indesign.php
    After you've created endnotes - you will have to cut them from the main text frame.
    Then you make a new frame and manually place the text frames at the end of the appropriate pages.
    It's very annoying.

  • How to link the same horizontal page for two different vertical pages without duplicate them?

    Hey guys,
    Is there a way to link the same horizontal page on two different vertical pages without duplicate the horizontal page?
    I have a doublepage of a book splitted in two parts in different vertical pages but i want link the fullsized image in the horizontal page for both of them. Got that? hahaha
    Thank you all

    Confusing But interesing.
    I think it's possible. I have a idea. It will need one advanced trick.
    To explain it, I need test simply haha.

  • Indesign CS5 - how to align objects

    Dear All,
    I have a problem with Indesign that is present from CS2 trough CS3 & CS4 version. I thought that CS5 version finaly will solve this issue, but it seems to me that nothing changed.
    When we have to align two objects lets say in Illustrator,  we may always mark the reference object by second click (then it is locked). In different software the sequence of marking objects for aligment is important (even better solution in my opinion than in Illustartor). But in Indesign things work different. If we align objects to the top - the most top object is reference. When we align to the left the object most to left is the base for aligment.
    I think that everyone learned to live with that by right placing the objects before aligment. Sometimes by centering (in past versions) we were forced to lock one of the objects before aligment. But now in CS5 locked object is not selectable. Besides that I never liked this long "work around" method.
    My question is how to easy align vertical centres of the objects shown on the picture below when I want object A to stay on place and object B to be centered to A. I don't want to use smart guides.
    Paul

    Hello Peter,
    thank you for fast feedback. I appreciate it.
    I don't want to use smartguides because when there are more objects around it will be confusing to guess if you have right center or not.
    Changing preferences for locked objects will not help much I guess. I like the way the locked objects are unselctable now and of course, as you mentioned, it is time consuming way to go.
    The case is, that I would like Adobe to add this issue to the wish list. If this "double click" way is good for Illustrator, why it is not implemented in Indesign, forcing users to use some magical, time consuming, workarounds.
    To be honest, I hopped that I miss the point in this case and someone will tell me some obvious shortcut to use by selecting the objects to get the things right.
    Paul

  • How to use Two main windows with in a page in script ?

    Hi any body explain me...
    How to use Two main windows with in a page in script ?
    with  header data in one main window,
    & Item data in other main window.

    HI..,
    u need to go for <b>SPLITTING THE MAIN WINDOW</b> !!!
    Main windows in page windows allow you to format text in multiple columns. Define an area in the page window, in which to position the main windows.
    Here is the procedure !!
    -->Create a page window and assign it to a page.
    Choose <b>Edit --> Main windows</b>.
    A dialog box appears.
    -->Enter values in the fields <b>Area width</b> and A<b>rea height</b> in accordance with the input guidelines for main windows.
    -->Enter values in the fields <b>Spacing</b> and Number in the <b>Horizontal group</b> if you want to use multiple columns. You can ignore the fields in the Vertical group.
    Determine how many columns and line areas are required for label printing. Then enter the corresponding values in the fields in the <b>Horizontal and Vertical groups</b>.
    -->The value in the field Left margin varies from main window to main window if multiple columns are used. The following applies:
    <b>
    Left margin of current column + Window width + Horizontal spacing = Left margin of next column</b>
    In label printing, the field Upper margin also varies from main window to main window:
    <b>
      Upper margin of current main window +  Window height + Vertical spacing = Upper margin of next main window</b>
    -->Enter a value in the field Start position.
    This is a counter. Enter a starting value which is equal to or greater than 1.
    -->The main windows are added to the list.
    -->Save your form.
    reward if it helps u...
    sai ramesh

Maybe you are looking for

  • How can i get all of the new music I loaded into iTunes onto my iPod without deleting the content that is already on it?

    I just loaded a bunch of music from my CD library into iTunes in the hopes of loading it onto my iPod. The problem is now I can't figure out how to do it. Two issues... First it says that if I synch it will delete what is already on my iPod which I a

  • How to make more hard disc space available

    Working in iMovie, I ran out of hard disk space so I cleared Trash and moved everything that was not essential for the task in hand onto a memory stick, including most applications such as iWork. However, no matter what I removed or cleared I was una

  • URGENT : ORA 302000 when using TEXT_IO.fopen

    Hi, I get this error ORA 302000 when using TEXT_IO package, the code I use is new_file:=text_io.fopen('c:\text.txt','r') i don't have the description of this ORA 302000 , pls does anyone have it?

  • How to add New Menu Bar using Custom.pll

    Hi All, I have developed a form based on the Oracle Apps form.For standard form i have to add one more menu bar in tools menu using custom.pll,i'm using 11.5.8 version. So can any one help me in thi regards as i'm new to this custom.pll,How can we ad

  • Question about Abstract Classes and Class Inheritance

    The semester is winding down, and the assignments are getting more complicated.... Prof has given us a project involving both an interface and an abstract class. There's a class Person, then an abstract class Employee that extends Person, and two typ