How to allocate more memory to graphic card

I have Hp probook 6570b with intel hd 4000 graphic card ... i just wanna ask how to change amount of allocated ram to graphic card ... i have no options to do this in bios .

Fastshock wrote:
... i have no options to do this in bios .
Hi,
No, nothing you can do. The system will work this out for you and it will allocate AVAILABLE memory for the GPU if required.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Allocating more memory to graphics card on HP Pavilion dv7-6157cl

The graphics card in the laptop is AMD Radeon HD 6520G which has the 512mb dedicated and up to 4gb shared, but wondering if there is a way to change that 512mb to 1g or so dedicated and then the rest. It's pulling that 512 from my system ram which I have a total of 8g any insight would be great! thanks!

Hi, Paul:
Please see my respose to your other post:
http://h30434.www3.hp.com/t5/Notebook-Hardware/Can-you-Allocate-more-memory-to-the-graphics-card-in-...
Paul

How to allocate more memory to ipad one?

App crashes

1. Double-click the Home button to close all Inactive Apps in Task Bar
2. Hold the Apps in Task Bar down for a second or two until you see the minus sign
3. Tap the minus sign to close Apps
4. Tap center of screen to return to Home Screen
5. Reset iPad. Hold the Sleep and Home button down for about 10 second until you see the Apple logo. Ignore the red slider

How do I allocate more memory to my 1st Gen and 4th Gen to stop Safari crashes?

How do I allocate more memory to Safari to stop opening crashes?

Have you tried any troubleshooting?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10-15 seconds).
Restore: Connect your iPhone to iTunes on your computer, backup, and then select Restore to Factory

How do i allocate more memory to my iphoto application? i am unable to add more photos to my library i keep getting a pop up saying not enough memory in my application

how do i allocate more memory from my hd to my iphoto application? i have over 80 gb on my hard drive, but only 1.7 gb allocated to my iphoto application & i am unable to add more photos to my library. i keep getting a popup that says not enough application memory.

There is excessive swapping of data between physical memory (that is, the memory chips on the logic board) and virtual memory (one or more files on the startup volume.) That activity is relatively slow and causes the whole system to be less responsive. It can happen for two reasons:
A long-running process with a memory leak (a kind of bug)
Not enough memory for your usage pattern
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
These instructions are for OS X 10.9 ("Mavericks.") The procedure may be slightly different for earlier versions of OS X.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the View menu, if it's not already selected. Select the Memory tab. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The processes named "Safari Web Content" render web pages for Safari. They use a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider them prime suspects.
Another process often implicated in memory leaks is "inkjet4" or "inkjet8," which is a component of the HP printing software. If it's present, force-quit the process in Activity Monitor to solve the problem temporarily. Empty the print queues in the Printers & Scanners preference pane (which has a slightly different name in each recent version of OS X.) If you don't use an HP printer, remove the software. Otherwise, if the problem is recurrent, update the software (which may not help) or contact HP support.
"Wired" memory should be a small part of the total. That memory is not swapped, but it makes less physical memory available which may then result in swapping. If you have a lot of wired memory, that's usually an indication of a memory leak in a third-party program that modifies the operating system at a low level. Ask for guidance in that case.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

How to allocate more ram to T410 IntelHD graphics? CONFUSED

Hello There
I have a T410 Thinkpad, and I would like to know how to allocate more ram to the IntelHD graphics so that I can run my video games a lot better. I have searched through the bios and cannot find how
Sorry for my English
-Jack

If you're running Windows 7 or later, Windows should automatically allocate up to 1.5GB of system RAM to the integrated graphics.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

TS2083 How do you know if you have more than one graphics card installed?

How do you know if you have more than one graphics card installed? My MacBook Pro does not provide a connectivity to TV via HDMI.

You can go to <http://support.apple.com/specs/#macbookpro> find your Mac's technical specs.
Depending on what kind of video output port you have, you should be able to get an adapter to HDMI. For example a Mini Display Port to HDMI (I have one of these).

How to add more ram to video card

Hello, to play a game I need to have 1 GB of ram dedicated. I looked all over to find where I can allocate more ram, but I can't seem to find anything. Does anyone know how to allocate more ram to a video card? Is it possible?
My card is Intel HD Graphics 4600

HPliker wrote:
Hello, to play a game I need to have 1 GB of ram dedicated. I looked all over to find where I can allocate more ram, but I can't seem to find anything. Does anyone know how to allocate more ram to a video card? Is it possible?
My card is Intel HD Graphics 4600
You have shared RAM you don't have dedicated Video RAM that is shared with your regular Computer RAM.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

While sync : can't allocate more memory !!!(WCE)

Hi All,
I'm synchronizing (/Orace/mSync.exe) several MB of data (not much more of 10 MB) on a CASSIOPEIA E-200 (64 MB) with a SD Card extension of 128 MB. While synchronizing, main memory decreases dramatically (main memory, not external memory) and finally i get the message:
-2000 can't allocate more memory -2000:0
Other synchronizations with a smaller amount of data are working ok.
It is posible for a sync of ~10 MB to drain >40MB of main memory?? !!
By now, i'm using the SD Card directory to store the synchronized client DB, but this is not enough to solve the problem.
I think that temporary files and processes on main memory are involved in this problem. It is posible to use memory cards for this??
Some ideas????
Thanks in advance.
Andris

Humm,
I think the problem may be the size of a single table replication.
The replication of 10000 registers from this table is working ok, but replicating 25000 i get the error ("Can't allocate more memory").
Anyone knows a limitation in the number of registers or size of a table replication????!!!
Thanks!!
Andris

Bootcamp: How to transfer more memory to the windows side? i'm running low

Wondering if you anyone knows how to transfer more memory to the windows side (partition) without having to uninstall bootcamp and start over...... I am running low on memory on the windows side but don't have either of the software disks to start over.

Too many people don't allocate enough storage space (memory = RAM) and make the partition too small.
Only things you can do is backup both OS X and Windows, remove the BootCamp Partition, reformat the full drive, and restore.
WinClone will help you with Windows. http://www.twocanoes.com
SuperDuper or TimeMachine or Disk Utility Restore with OS X.

How much better is the new Graphic Card?

How much better is the new graphic card compared to the X1600 256mb in the older 2.33 Core 2 duo's? Im a gamer and was wondering if there is gonna be a big difference or just a small difference?

Hi,
according to this there seems to be a big advantage: http://www.apple.com/macbookpro/graphics.html
(Scroll down to the bottom).
Regards
Stefan

How to allocate more memmory for SMS

Hi I have 6230i, firmware V03.30. I get "memmory almost full" message, when I receive the message. I have 180 SMS in may phone, which I want to keep. How can I allocate more memmory for text messages? Memmory status: Phone =3.1Mb (Gallery =2.9MB, MMS=170.5K) Free memmory= 21.3MB. I have 512MB card, where 300MB is still free. Thank you for advice Krishna

This is one of the things that always annoyed me about my 6230i... I never found a solution for it either. My In/Out boxes filled up every 2/3 days, so it was seriously annoying...
That's one of the reasons I went for a smartphone, as the message boxes don't have a set allocated memory - they just share it with everything else... or use the memory card, which is even better.
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5

How to check my computer's graphics card compatibility

My computer model name is
HP Pavilion Elite HPE
motherborad: bk170aa-aba hpe-210y
Processor: AMD Phenom(tm) II X4 945 Processor, 3000Mhz, 4 core logical processor
Graphics card: ATI RAdeon HD 5450
I have purchased this desktop for 5 years and my graphics card had started to wear out.
So i did some research on what graphics card my desktop can handle but it was very challenging
some says that if the PS is high the computer can use anything but the size of the graphics card concerns me
and some says that just buy a 270x but i dont know what my PS is for the computer and i dont know if my computer can use the grapics card's full potentials.
So how I do really check what my motherboard can handle for the graphics cards?
This question was solved.
View Solution.

Welcome to the forum.
The power supply unit (PSU) in the computer is 300W. Most mid-level video cards require a minimum of 400W to run properly. A video card that will run with the 300W PSU will not
be much better than the integrated video. Therefore, a PSU upgrade is necessary, also.
OCZ and Corsair make very good PSU's. Irecommend at least 500W; 600W is even better for future upgrades. You should measure the current PSU and compare the measurements to the one you choose.
The video card should be no more than 9" in length. It is a PCI Express x16. If you upgrade the PSU this card will work for you:
http://www.newegg.com/Product/Product.aspx?Item=N82E16814130839
Please click "KUDOS" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

How do I use the secondary graphics card on a mac book pro with retina display?

I know that this is kind of a stupid question but I am new to dual graphics cards and this is the first mac that I have ever had, so I don't understand how you use the 2nd graphics card. When I click on the apple logo and go to about it shows the Intel Graphics HD 4000, but I know that they put an Nvida in here to so how do I access that? Because it has a lot more graphic power than the intel does.

Try opening iPhoto and then consulting the More Info... item. That app will cause an autoswitch to the big GPU.
Same will happen with any other app that requires that kind of display driving power.

Is my system DV7t-3300, or DV7t Quad Edition? And how to add more memory to it?

Dear forum,
I have an old notebook computer bought back in March 2010. It's a DV7t series. As it's getting slowly, I'm thinking of adding more memory. However, I'm not sure how much memory the motherboard can support for the upgrade.
I'm stuck with the first step, which is to decide the model number (and then motherboard) of it.
My original order email states the following:
YOUR CUSTOMIZED HP PC
dv7t quad edition
• Genuine Windows 7 Home Premium 64-bit
• Intel(R) Core(TM) i7-720QM Quad Core processor (1.6GHz, 6MB L3 Cache) with Turbo Boost up to 2.8 GHz
• FREE Upgrade to 4GB DDR3 System Memory (2 Dimm) from 3GB DDR3 System Memory (2 Dimm)
• 500GB 7200RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
• 1GB Nvidia GeForce GT 320M - For i7-720QM and i7-820QM Processors
• 17.3" diagonal HD+ High-Definition HP LED BrightView Widescreen Display (1600 x 900)
• LightScribe SuperMulti 8X DVD+/-RW with Double Layer Support
• Webcam Only
• Intel Wireless-N Card with Bluetooth
• HP Integrated HDTV Hybrid Tuner
• HP Color Matching Keyboard
• 8 Cell Lithium Ion Battery
• No Modem
• Microsoft(R) Works 9.0
• HP Home & Home Office Store in-box envelope
However, the bottom of the notebook computer has a label that specifies the following:
Pavillion dv7
Serial: omitted
Product: WH764AV
Model: Q dv7t-3300.
I visited some memory buying website like 'crucial.com'. However, I was prompted to select the model and there were both dv7t-3300 CTO and dv7t Quad Edition. Unfortunately, they resulted in different kinds of memory (although the specs of the sugested memory modules seem to be the same, these two memory modules have different model numbers).
So, what model number my system has? 3300 CTO or Quad Edition?
Perhaps a suitable model number would tell me which motherboard this notebook has. Additionally, can anyone advice me about on how much memory my notebook can support (8GB or 16GB) maximum?
Thanks a lot!
Cruiser

Hi,
Max is 8Gb using the following manual:
http://h10032.www1.hp.com/ctg/Manual/c01859666.pdf
And from the following site:
https://www.ramcity.com.au/upgrade/hp-compaq/pavilion-dv7-series-notebook/dv7t-3300-cto/73893
The above manual shows you how to add/replace RAM. Looks like you have to buy 2 x 4Gb sticks.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How to allocate more memory to graphic card

Similar Messages

Maybe you are looking for