How to allocate order by checking the price scales during MRP run

Hi,
Here is a scenario.
A material XXXX is being supplied by Vendor A and Vendor B.
Vendor A has got price scale as below
For Order qty 0-10 pc  --  Rs. 10 per pc
For Order qty 11-20pc --  Rs. 10 per pc
Vendor B has got price scale as below
For Order qty 0-10 pc  --  Rs. 12 per pc
For Order qty 11-20pc --  Rs.   8 per pc
With these price options,...
--If requirement qty is 8 pc, then Vendor A should be assigned as Source of Supply in PR
--If requirement qty is 12 pc, then Vendor B should be assigned as Source of Supply in PR
How can this be met?
Regards,
Prathap

Hello guys!
As told, here I come with news about my problem.
Finally, the Strategy Group didn't solve our problem.
We didn't solve our problem as planned but we have found another way to work.
Instead of including the unrestricted stock in the MRP project, we use transaction CO46 to have an overview of the unrestricted stock of all the components of the project's BOM.
Based on that overview, the user can make stock transfers of the available quantities from the unrestricted stock to the project stock.
I hope it can help people having the same problem!
Bogdan

Similar Messages

  • Planed order type NB instead of LA during MRP Run

    Hi,
    All my components are externally procured and I maintained planned delivery time for scheduling purpose. But system is automatically picking the order type LA which is inhouse production when I am running MRP. What setting I need to make for MRP to select order type NB for Planned order so that system picks the plnned delivery time form material master to calculate basic finish date.
    We are generating planned order instead of Purchase requistion through MD02 setting.
    Regards
    Raghavendra

    Tested the mentioned scenario in the system, it explodes the BOM with Procurement type "F" and generates the dependent requirements for the components (planned orders with order type NB )
    Master Data Settings:
    Maintained "F" under procurement type for procured items
    Ran MRP with following parameters (MD02)
    Processing key     NETCH
    Create purchase req.     3
    Schedule lines     3
    Create MRP list     1
    Planning mode     2
    Scheduling                           2
    Lastly, check on " Plan Unchanged Components"

  • BADI For Changing Planned order Qty during MRP Run

    Hi,
      My requirement is i want to change Planned order qty based on some conditions during MRP run(MD02). Is there any BADI to fullfill my requirement.
    Thanks,
    Kishore

    Not sure I understand the situation correctly...You want to delete the planned orders before MRP runs again. WHy do you want to do that ? Are these firmed Planned orders ?

  • How to change PR Qty before rounding value is applied during MRP run?

    Hi, SAP gurus~
    I have an inquiry about how to change the PR qty of specific raw material before rounding value was applied during MPR run.
    Here is a simple example for what I needed.
    -SAP Original Logic
    1. Original requirement Qty: 190
    2. Rounding value at Material Master (MRP1 View): 200
         System will suggest PR Qty 200 at MD04.
    -My Customer Requested Logic
    1. Original requirement Qty: 190
    2. Additional buffer Qty for C/S purpose: 10 % of Original requirement.
    3. Rounding value at Material Master (MRP1 View): 2000020
         Requirement Qty would be 209 (190 + (190 x 10%) ) before rounding value is applied and system should suggest PR Qty 400 at MD04.
    -     I input assembly/component scrap rates (10 %) at Material master for above purpose, but it doesn`t not work for raw material.
    -     I tested the BADI (MD_PURREQ_CHANGE/ method: CHANGE_BEFORE_SAVE_MRP), but I can only change the PR Qty, which rounding value already applied.
    How can I change the PR qty during MRP run before rounding value is applied? Is there any other method or User-exit possible to solve above problem?
    Thanks in advance.

    Dear ,
    How can I change the PR qty during MRP run before rounding value is applied? :
    Simple way is goto MD04 with your material and plant code -Select the PR-Hit the pencil (change mode ) -Choose qty field  and change , SAVE at individual level .Or Use : MEMASSRQ - Mass Maintenance
    If you want to use User Exit , then you try a work around :
    M06B0001 Role determination for purchase requisition release
    M06B0002 Changes to comm. structure for purchase requisition release
    Try and let us know if u have any issue .
    Regards
    JH

  • How can I check the price of upgrading CS5 educational edition to CS6 educational edition?

    How can I check the price of upgrading
    "Adobe Creative Suite 5 Design Premium Student and Teacher Edition" to
    "Adobe Creative Suite 6 Design & Web Premium Student and Teacher Edition"?
    Accroding to http://www.adobe.com/hk_en/products/cs6/faq.html , "owners of a CS5 or CS5.5 suite edition qualify for upgrade pricing to a CS6 suite edition."
    I can only found the price for CS6 full version from the site. But I can't found the upgrade price. Where can I check the upgrade price?
    Thanks.

    There are no upgrades for edu products. You simply buy a complete new license at the discounted price.
    Mylenium

  • The stocks app crashes every time I check the price of NXPI.  But it works fine for other stock codes.  Strange.

    The apple stocks app crashes every time I check the price of NXPI, but okay for other stock codes.  Strange.

    Ok---I opened the app with my phone held
    In landscape mode then just the charts came
    Up-- I swiped to choose another stock besides
    NXPI and it unstuck the app.
    Good luck.
    g

  • How do I find out what the price thresholds are before royalties are paid to the author?

    How do I find out what the price thresholds are before royalties are paid to the author?

    If you sign in to iTunesConnect and look through the Contact Us questions, one of them says:
    "Payments are made within 45 days of calendar month end if both of the following conditions are met:
    All documentation is complete, including any required banking and tax information.
    The payment threshold of USD $150 has been exceeded.
    If you have not received a payment for a given month within 45 days after the end of the month, please confirm that all documentation has been completed and provided. Also, please confirm that the cumulative amount owed exceeds USD $150 by converting reported amounts using current exchange rates."
    I should say though I seem to get paid without reaching this threshold.

  • How do i find out if the server admin daemon is running

    Hi All,
    I've got an OS X server that for some reason ( probably due to me pratting around) has decided not to have a working server admin prog. I can fire up the client program and point it at any of the IP addresses that the server is looking at and then you get an error message basically saying that the server admin daemon is not contactable.
    So ...
    1). How can i find out if the back end daemon is running
    2). what port(s) does it listen on
    3). How can I turn on some logging to see what's happening when I run serve admin
    4). Any other tips as to how to find out why its not working
    Rgds
    Alex

    You should post this in one of the forums in the Mac OS X Server v10.5 Leopard category. You'll get better response there.

  • I don't know what is going on with the White Balance (WB) and LR.  I had no problem before but recently LR started to change the  WB as  it is importing photos.  I checked the color scale for my photos and LR and both are with sRGB.  Now instead of LR cha

    I don't know what is going on with the White Balance (WB) and LR.  I had no problem before but recently LR started to change the  WB as  it is importing photos.  I checked the color scale for my photos and LR and both are with sRGB.  Now instead of LR changing the WB it is giving me a second copy with a new WB.  Your advise is very much needed and appreciated.  Thank you.

    Can you show us a screen capture of this 2nd copy with a new WB in your Lightroom grid? Thanks
    Are these second copy photos by any chance photos that had been previously imported?

  • Message 'Please check the destinations for parallel MRP'.

    Hi,
    While I was running MD01, I encountered the following message 'Please check the destinations for parallel MRP'.
    Please advise.
    Thank you in advance.

    Hi,
    In MD01 initial screen indiacate parallel processing indicator.
    In SPRO> PRODUCTION > MRP >MASTER DATA > Define parallel processing in MRP. In that give your server name.
    Regards,
    Dharma

  • Order reservation should not get planned in mrp run

    Hello friends,
    Actually for a finished material i have created one production order by CO01.Because of it for semi finished material system created order reservation.I dont have any stock of semi finished material.Now i want while running the mrp run system should not planned this Order reservation of semifinished material.For these in configuration of availability check (Scope of check T.C  OPJJ), I  made the settings that system should not consider reservation (i deactivated the tick for include reservation) and for include depend reservation , i selected Donot check.And all these settings i made in checking group 02 and checking rule PP.After doing all these settings than also system is considering the order reservation for semifinished material and generating the planned order for it.
    Do i need to do any other configurations?
    Thanking you guys in advance.

    Hi Jitendra,
    Checking Control (OPJJ) has no relation with MRP.It is useful in the case of Plan and Production / Process Order only to find out Missing part.
    Now come to MRP again.
    You have a choice of only 3 type of stocks to include or exclude them during MRP run while rest of the things like (PO,PR,Reservation etc are consider by default)
    Go to OPPQ and after selecting Plant go to Available Stock.You will find that options,
    - Stock in Transfer
    - Block Stock
    - Restricted Stock.
    And one more thing Reservation is not a available stock but its one kind requirement and if there is no stock then system will activate the Planning file entry and during next MRP run it will generate Planning proposal also.
    Regards,
    Dhaval

  • DURING MRP RUN MATERIAL IN QI STATUS HOW TO GET MATERIAL OUT OF QI

    HELLO EXPERTS:
    DURING EVERY 24 HOUR MRP RUN 1 OR 2 MATERIALS SHOWS AS BEING IN QI STATUS WHEN IN RESTRICTED STOCK..... MY UNDERSTANDING IS MATERIAL IN RESTRICTED STOCK IS NOT IN QI.....CAN YOU EXPLAIN WHY

    Dear in SAP generally there are 3 stock statuses are in use most of the time they are Unrestricted,Blocked and QI stock.
    When you have activated any inspection setup in MM QM view based on the setup when you do any movement for that material it will create an inspection lot with stock posting to QI,based on your results you can send that QI stock to unrestricted or blocked through Usage Decision(QA11).
    Now during MRP run if you don't want to consider the QI stock for net requirement calculation check this badi as in standard SAP You would be able to define only the following stock types not available for MRP run.
    1. Stock In Transit
    2. Blocked Stock
    3. Restricted Use stock.
    This you need to configure in OPPQ transaction in the available stock section for the plant.
    So in standard it is not possible to restrict QI stock from not considering as available stock, if required you need to look for Implementing BADI "MD_CHANGE_MRP_DATA ", please check with your technical consultant(Abaper).
    Cheers
    KK

  • How to create a service order and check the internal order in R/3

    Required Solution:
    1. How to copy existing service order and create new one and check the internal order in R/3, whether the certain service order is correctly created in r/3, can you polease explain the steps plz.
    2. If i am creating service order by service template finally the service order is getting created but it is not showing me in the table iaom_crm_aufk, how to check this.
    can any one help me in this issues as soon as possible.

    Hello Zita,
    Try to restart your portal after creating <b>ServiceUser</b> in both UME and KM.
    One more major difference between ServiceUser and normal portal user is that a ServiceUser does not have a UserAccount (IUserAccount)
    Object serviceContext = null;
            try {
                serviceContext = AccessController.doPrivileged(new PrivilegedExceptionAction() {
                    public Object run() throws WcmException {
                        return ResourceFactory.getInstance().getServiceContext(CONTRACT_SERVICE_USER);
            } catch (PrivilegedActionException e) {
                logger.severe(e, "ResourceContext for the technical " + serviceUser +
                     " user could not be retrieved.");
    IResourceContext resCtx = (IResourceContext) serviceContext;
    So I modify all KM resources with this resCtx.
    Hope this helps ...
    Greetings,
    Praveen Gudapati
    p.s. Points are always welcome for helpful answers

  • Is it possible to get planned orders by checking the capacities

    Dear experts,
    Can u please help on the following case!
    when we do MRP run for any material, planned orders are getting generated on the particular date as per our PIR. once we got the planned order, we are converting to production orders to the defined date.
    Is it possible to get the production order dates by checking work centre capacities?
    even if capacity is full, production orders are getting generated on the particular day,we are not able to produce the item as defined on the day as capacity is full on the workcentre.ultimately customer is not happy as dispatch is not taking place in time.
    how will we configure this case in the system to enable timely dispatches or timely intimation to the customers for delay in dispatch?
    regards,
    murthy.

    for any mxml tag with an id attribute: <mx:Button
    id="foo">
    the child is available simply as the variable "foo":
    foo.label = "New Label"
    Other children can be accessed by walking the tree using
    getChildAt().
    quote:
    Originally posted by:
    LaCampanella
    If it is possible to get any child by the way like DOM's
    document.getElementById, it will be very useful to us controling
    child.
    Thanks.

  • How do I edit (or check) the spelling in the dictionary

    I have told the spell check to learn several words. Now what I want to do is check the dictionary to see if something got added that is really spelled incorrect or to remove words I have added. I would think that a file exists somewhere that I can check/edit if needed.

    +-+-+-+-+-+-+-+-+
    +4. Discussions+
    +Apple Discussions, launched in August, 2000, have grown rapidly in usage and features. The main features include personalization, subscription capabilities and email capabilities. For information on how to use Discussions, please visit the Discussions Help Page. Cookies should be enabled and an Apple ID account is required if you would like to contribute to the discussions.+
    +Entering the Help and Terms of Use area you will read:+
    +*What is Apple Discussions and how can it help me?*+
    +
Apple Discussions is a user-to-user support forum where experts and other Apple product users get together to discuss Apple products. … You can participate in discussions about various products and topics, find solutions to help you resolve issues, ask questions, get tips and advice, and more.+
    +_If you have a technical question about an Apple product, be sure to check out Apple's support resources first by consulting the application Help menu on your computer and visiting our Support site to view articles and more on our product support pages._+
    +*I have a question or issue*—+
    +how do I search for answers? _
It's possible that your question or issue has already been answered by other members so do a search before posting a question._ On most Apple Discussions pages, you'll find a Search Discussions box in the upper right corner. Enter a search term (or terms) in the field and press Return. Your results will appear as a list of links to posts below the Search Discussions Content pane.+
    +Search tips are available here:+
    +search/tips.html">http://www.apple.com/search/tips.html+
    -+-+-+-+-+-+-+-
    Taking care of that with the keystring "spell AND remove" would have give you:
    http://discussions.apple.com/thread.jspa?messageID=7666338
    Yvan KOENIG (from FRANCE mercredi 30 juillet 2008 10:35:09)

Maybe you are looking for

  • Want to edit text, but do not have the font

    Hello: I have a certificate in a pdf file, and I have Adobe Acrobat XI. The file contains the fonts Shalom Old Style (only a couple of Hebrew words) and the font Sanvito. Since I have neither font in Windows 7, I assume (also after having tried) that

  • Regarding chossing the Business Partner Master Data

    Dear All,              I have one query regarding chossing the Business Partner Master Data. Let take an exapmle  suppose 2 sales person are making the sales Quotation and every sales Persons only making the quotaion for the specified leads or custom

  • The xquery cannot have an unbound current node

    Hi, am getting this error •[RouteNode1, Routing Table action] XQuery expression validation failed: The xquery cannot have an unbound current node.

  • When I my send email, its delivered with an unknown sender

    Problem with my email.  I got this email msg. "Mike, You sent your email with an unknown sender, so I was unable to reply to your email." when I my send email, its delivered with an unknown sender! This just started in the last couple days.

  • Every time i open Mac App Store, it reboots my router..

    Does anyone have a fix for this?.. I've googled everything and nothing has come up anywhere... Only started to happen AFTER I updated to Mountain Lion. App store works on every other Apple product i have.