How to Allow Comments from Reader?

I can view a PDF using Acrobat 7 Professional, and the security settings say that commenting is allowed.
I then view the same PDF in Reader 9, and it says that commenting is NOT allowed.
How can I set up the PDF so that comments can be added using Reader?
MTIA
David

Hi, Bernd
So easy when you know how, and where to look!
Many thanks,
David

Similar Messages

How to block others from reading email?

How to block others from reading email on the Ipad 2?

iPads are not multi user devices, they are either single user devices with privacy by setting the mentioned passcode to protect entry into the device or it is a shared device where everything on the iPad is available to everyone with access to the iPad.

How to retrieve Comments from HR 0019 info type?

Dear
How can i retrieve All the Comments from HR 0019 infotype ( 01 sub-info ) by passing personal number?
i dont want to use any logical database.
i tried to use HR_READ_INFOTYPE , but it's not what i want.
Thanks
Gordon

>
Gordon Ho wrote:
> Dear
>
> How can i retrieve All the Comments from HR 0019 infotype ( 01 sub-info ) by passing personal number?
>
> i dont want to use any logical database.
>
> i tried to use HR_READ_INFOTYPE , but it's not what i want.
>
> Thanks
> Gordon
Please check the method READ of the class CL_HRPA_TEXT_CLUSTER
Also check this FM HR_READ_INFTY_NOTE
Edited by: Rajesh on Dec 4, 2008 10:08 AM
FM added

How to stop websites from reading installed extensions?

Facebook apps refuse to load if I have a certain addon installed. How can I prevent apps from reading installed addons?

There's no functionality in the player that would allow you to control this; however, I'm having a hard time thinking of what problem you're trying to solve by asking for this feature. Is this to preserve bandwidth on a metered account?

How to retrieve comments from one OfficeTask activity and use them in another OfficeTask activity for Multi level Approval sequential Workflow

I'm designing a sequential site workflow using Visual Studio 2010 for Project Server 2010. In my case, I have following 6 stages in the workflow:
1. InitialProposal Stage
2. Approval Stage1 -- Needs approval from Approver Project Security Group Members1
3. Rejection Stage
4. Approval Stage2 -- Needs approval from Approver Project Security Group Members 2
5. Execution Stage
6. Completed Stage
Requirement is workflow should move to Approval stage2 from Approval stage1 if approved by all members of Approver Project Security Group1and it should move to Rejection Stage even if a single member rejects it.
Workflow should move from Approval Stage2 to Execution Stage if approved by all members of Approver Project Security Group2 and it should move back to Approval Stage1 on rejection by a single member of the group.
I'm using inbuilt PSWApproval content type and OfficeTask activity for creating approval task for the group members at both stages.
On task rejected in Approval stage2, task will be assigned again to Approval Stage1 and I want to show comments given by members of Approver Project Security Group2 to the members of Approver Project Security Group1 with this assigned task
but I'm not able to retrieve comments from officeTask activity.
My question is where exactly these comments are saved? how can we retrieve them and use them in another officetask activity? If this is not possible then what is the possible solution for meeting above mentioned business requirement?

Hi Paul,
Thanks for your suggestion.
By comments field I'm assuming OfficeTask.Comments field. Problem is, this field is always null. I tried accessing this field in CheckExitCondition activity as well as in OnTaskCompleted but in both the cases, it was null only(I wrote comments while approving
the task).
I used a code activity within OnTaskCompleted activity and following code for accessing Comments and Description fields:
public string officeComments;
public string officeDescription;
private void TaskCOmplete(object sender, EventArgs e)
CodeActivity Sender = (CodeActivity)sender;
Microsoft.Office.Workflow.Actions.OfficeTask ofctask1 = ((CompositeActivity)Sender.Parent).Parent as Microsoft.Office.Workflow.Actions.OfficeTask;
officeComments = ofctask1.Comments;
officeDescription = ofctask1.Description;
Please tell me if I'm doing anything wrong here, I'm very new to Workflows. Also, do I need to set any specific property of officeTask for retriving comments?
Thank you

How to capture comments and read in next participent steps in Workflow?

I want to capture comments in one of the participent steps of my workflow and read them in the next step . Please share some suggestions on it .
I have added a from step as the participent step but it is saving data with random ids . I am not able to figure out how to read the data for corresponding process step in the workflow ?
Please help .

had to write Java process for the same
Just in case somebody wants a java version of the answer Sham mentioned above
please feel free
HistoryItem previousHistoryItem;
String stepType;
this.workItem = item;
this.workflowSession = session;
this.history = workflowSession.getHistory(workItem.getWorkflow());
Iterator<HistoryItem> historyIterator = history.iterator();
while(historyIterator.hasNext()){
    previousHistoryItem = historyIterator.next();
    stepType = previousHistoryItem.getWorkItem().getNode().getType();
    if(stepType != null && stepType.equals(WorkflowNode.TYPE_PARTICIPANT) && previousHistoryItem.getWorkItem().getMetaDataMap().get("someproperty",String.class) != null){
        someproperty=previousHistoryItem.getWorkItem().getMetaDataMap().get("someproperty",String .class);
        log("\n someproperty : " + "\n" + someproperty);
    }else{
        log("\nNo Step type or someproperty Found...");

How to allow ping from inside to outside in 2900 router?

Hi,
I have a Cisco router 2900 with firewall, i need to know how can i allow the ping from self zone to outside zone, i trried to create policy from self to outside but i still didn't allow ping or tracert, i get that message when i try to ping from cisco router:
"Unrecognized host or address, or protocol not running"
any help will be appreciated.
Thank you

Hi jcarvaja
here is the used configuration:
Building configuration...
Current configuration : 5584 bytes
! Last configuration change at 09:00:20 UTC Tue Apr 9 2013 by admin
version 15.1
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
no service password-encryption
service udp-small-servers
service tcp-small-servers
service sequence-numbers
hostname Router
boot-start-marker
boot-end-marker
security authentication failure rate 3 log
security passwords min-length 6
no logging buffered
no logging console
enable secret 5
no aaa new-model
no ipv6 cef
ip source-route
ip gratuitous-arps
ip icmp rate-limit unreachable 1
ip cef
ip name-server 163.121.128.134
ip name-server 163.121.128.135
ip port-map user-custom-fleet port tcp 2000 list 1
multilink bundle-name authenticated
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-324261422
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-324261422
revocation-check none
crypto pki certificate chain TP-self-signed-324261422
certificate self-signed 01
30820229 30820192 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 33323432 36313432 32301E17 0D313330 34303930 38343034
375A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3332 34323631
34323230 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
B8ABD60F 8C879B3B BC1C1643 48059AD2 F940A700 6D58161E 37D53E6E E028B806
61EAA942 CED2A3C6 3FB3A47E 20E05B10 0941A9D8 38FFA6F9 D2B9E52C 225A57BA
14F8842A A26E7E02 38E9F7C8 328504D0 5C3EEE41 CC75B237 BBD07CBA 1A850540
2A5AAFAD 4553FB03 0E366211 9AC09967 4DC03082 0AF546A3 F6AA2739 1D8A8AA9
02030100 01A35330 51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D
23041830 16801428 FEEB3910 B7A1D374 1F86BCD5 96CEDF75 8DF11E30 1D060355
1D0E0416 041428FE EB3910B7 A1D3741F 86BCD596 CEDF758D F11E300D 06092A86
4886F70D 01010405 00038181 006BBF7A 430905F6 D5B27B0D 96315504 87816DAA
B5EA86D9 6E9A1D58 7B328C88 A6A358D0 00D035A9 8CDDEC41 15AF0108 F5CB1072
B0485D7D CFC0D0CB 71E9B153 FB7B8B40 40C157E4 B254D01C 890D615F D8395545
F0B47E0B 57341EB2 C0CE0039 DC18EAD6 078986F0 A5A5D04F D5041DB6 23CAA002
4901248C 95B61A0B 3ED5B26A EF
quit
license udi pid CISCO2901/K9 sn FCZ1526C3JL
object-group service Outside-Reply
icmp echo-reply
username admin privilege 15 secret 5
redundancy
ip finger
ip tcp synwait-time 10
ip ssh time-out 60
ip ssh authentication-retries 2
class-map type inspect match-any Deny_ALL
match access-group name dwdwd
class-map type inspect match-any Inside-Outside
match protocol http
match protocol https
match protocol dns
class-map type inspect match-any ICMP_RQST
match protocol icmp
policy-map type inspect Inside-Outside
class type inspect Inside-Outside
inspect
class class-default
drop
policy-map type inspect Self_to_Outside
class type inspect ICMP_RQST
inspect
class class-default
drop
policy-map type inspect Outside_to_Self
class type inspect Deny_ALL
pass log
class class-default
drop
zone security IN
zone security OUT
zone-pair security Self_to_Outside source self destination OUT
service-policy type inspect Self_to_Outside
zone-pair security Outside_to_Self source OUT destination self
service-policy type inspect Outside_to_Self
zone-pair security Inside-Outside source IN destination OUT
service-policy type inspect Inside-Outside
interface GigabitEthernet0/0
ip address 101.101.100.245 255.255.255.0
ip mask-reply
ip directed-broadcast
ip flow ingress
duplex auto
speed auto
interface GigabitEthernet0/1
description $FW_INSIDE$
ip address 49.31.152.80 255.255.255.248
ip mask-reply
ip directed-broadcast
ip flow ingress
zone-member security IN
duplex auto
speed auto
interface Serial0/0/0
no ip address
ip mask-reply
ip directed-broadcast
ip flow ingress
encapsulation frame-relay IETF
no fair-queue
frame-relay lmi-type q933a
interface Serial0/0/0.16 point-to-point
description $FW_OUTSIDE$
ip address 172.17.18.122 255.255.255.252
ip mask-reply
ip directed-broadcast
ip flow ingress
ip verify unicast reverse-path
zone-member security OUT
frame-relay interface-dlci 16
interface Serial0/0/1
no ip address
ip mask-reply
ip directed-broadcast
ip flow ingress
shutdown
clock rate 2000000
ip forward-protocol nd
ip http server
ip http access-class 2
ip http authentication local
ip http secure-server
ip route 0.0.0.0 0.0.0.0 Serial0/0/0.16
ip identd
ip access-list extended ICMP
remark CCP_ACL Category=128
permit ip any any
ip access-list extended deeef
remark CCP_ACL Category=128
permit ip any any
ip access-list extended dwdwd
remark CCP_ACL Category=1
permit object-group Outside-Reply any any
access-list 1 remark CCP_ACL Category=1
access-list 1 permit 196.219.234.77
access-list 2 remark Auto generated by SDM Management Access feature
access-list 2 remark CCP_ACL Category=1
access-list 2 permit 101.101.100.0 0.0.0.255
access-list 2 permit 10.20.10.0 0.0.1.255
no cdp run
control-plane
line con 0
login local
transport output telnet
line aux 0
login local
transport output telnet
line vty 0 4
login local
transport input all
line vty 5 15
login local
transport input all
scheduler allocate 20000 1000
end

How to get .msi from Reader .exe v11.0.01 for domain update

Wondering how to get the .msi file that I need to patch the domain workstations using Windows Group Policy. The only file Adobe provides is an .exe file for the latest update. v11.0.01

As an alternative to what Baigley has suggested, you can use the 11.0.00 MSI as released by Adobe and patch it using the latest 11.0.01 patch to create a GPO package to be deployed across your network as below.
1. Download the 11.0.00 MSI from ftp://ftp.adobe.com/pub/adobe/reader/win/11.x/11.0.00/en_US/AdbeRdr11000_en_US.msi
2. Download the 11.0.01 MSP from http://ardownload.adobe.com/pub/adobe/reader/win/11.x/11.0.01/misc/AdbeRdrUpd11001.msp
3. Create an AIP using the MSI downloaded in step 1 above by the following command:
    msiexec /a <path to MSI downloaded>
    In the subsequent dialogs provide a location wherein to create the AIP (for instance C:\AIP)
4. Once the AIP is created, patch it with the latest 11.0.01 installer by the below command.
    msiexec /a C:\AIP\AdbeRdr11000_en_US.msi /p <path to MSP downloaded in Step 2>
This will create the GPO Package for 11.0.01 Reader, ready to be deployed in your network.
Hope this helps.
Thanks
Ankit

Anyway to allow comments from readers on iWeb blogs when hosted on iPage?, Anyway to allow comments from readers on iWeb blogs when hosted on iPage?

Since Mobile Me is going away, I moved my iWeb pages to iPage. I started a blog but it won't allow readers to leave comments. Help says this feature is only available when hosted on MobileMe but MobileMe is going away! Does anyone know a way to enable reader comments to an iWeb created blog hosted on iPage?
Thanks!

The easiest way to correct your color problem is to upload the Disqus code as an HTML doc and display it in an iframe on your page. This way you can keep the black iWeb page and have the comments with a white background.
Open a text editor and paste your code. Export as HTML giving it a name like - comments.html
Upload this to the root folder on your server in a folder named - Disqus
The URL for the iframe code will be...
http://www.domain-name.com/Disqus/comments.html
This is the code for the HTML Snippet and you can change the height and width to suit your layout...
<iframe src="http://www.domain-name.com/Disqus/comments.html" frameborder="0" style="height:1000px;width:930px;padding-top:50px" scrolling="yes" allowTransparency="false" ></iframe>
Note that you need to add an identifier to each file if you want to use several - one for each blog entry.
var disqus_identifier = '0001';
var disqus_url = 'URL to the blog page';
The identifiers can simply be numbers like 0001, 0002, etc
The alternative is to style your own page if you want your comments section to have a black background. Disqus has a customizing option or you can create your own styles and add them to the head of the comments.html doc or reference a separate stylesheet. Disqus has info and guidelines about styling here...
http://docs.disqus.com/help/69/

How to allow access from LAN to server on LAN using external FQDN? (Outlook web access issue)

I may have phrased the topic not too clearly, but I have an external domain name of mail.company.com , I want my users INSIDE the company be able to also get to https://mail.company.com , currently they cannot (nothing loads, looks to me as if firewall simply drops it) and I'm drawing a blank on how to get this done. Externally this works fine so if you're outside the company you can load up OWA just fine since my NAT rule translates the external IP to internal IP, but something is blocking this from the inside.
I have an ASA 5510.
If you can just sent me on the right path with theory I'll figure it out on my own, I don't need exact steps, but I must be thinking of this wrong as I'm not getting anywhere.

Hello Martin,
Maybe what is happening is that the DNS entry is pointing to the public IP address of the server, so it could be that the internal users are forwarding the traffic to the public IP address of the server and the ASA will drop the packet since the hosts are going to try to contact the server from the inside when actually there is a NAT rule that translate the internal server on the outside with a public IP. The traffic will try to contact that server going to the outside interface, but the ASA will notice that the connection was initiated on the inside interface, so it will refuse the connection.
There is a solution for this issue. You can create a static NAT rule that matches le that translate the internal host to the public IP address, in this case, instead of -inside,outside-, the rule is going to be -inside,inside-.
For example:
Let`s say that there is a static NAT that match the following statement for the inbound traffic coming on the outside:
static (inside,outside) {public IP} {private IP}
There should be one that says the same but with inside,inside:
static (inside,inside) {public IP} {private IP}
Please configure that rule and let me know the results.
Thanks.
--Armando Rojas

How to enable comments on Reader

Hello,
One of the main uses I had of Acrobat 9 was to enable comments on my PDF files for Adobe Reader. Now I upgraded to Acrobat XI, and I could not locate that option anywhere. I looked for it in the menus and the help, Googled it and searched here, to no avail.
I understand that Adobe Reader XI does not need that permission to put comments on files. But I still need to enable the comments, for users who will get my files that do not have Adobe Reader XI - in particular Linux users, given that the most recent Reader for Linux is 9.5.5.
Can anyone help me? Am I missing something obvious?
Thanks,
Paulo

Hi Gilad D,
Gilad D (try67) wrote:
File - Save As Other - Reader-Extended PDF - Enable Commenting &
Measuring...
Can we automate it, the same in Javascript or applescript?, I have to do 1500 PDFs like above option of Enable Commenting & Measuring...
Thanks
David

How can I allow commenting in a certified document/

In Acrobat Pro 9, I created a certified document by selecting "Certify with out Visible Signature." I tried all three settings in "Permitted Changes after Certifying" but my PDF still does not allow commenting in Reader. The PDF allowed commenting before I certified it---how can I enable commenting after certification?

Tags are independent of PDF page content. Removing/deleting a page or page(s) does not remove anything in the PDF's structure tree.
As Full Check is looking at the structure tree the report reflects what is present there.
In the Tags panel walk the structure tree to locate the Table tags. Delete these.
Be well...

How to allow learners comment about course after the quiz result page?

How do I go about allowing the leaners to comment on the course they have taken which should appear after the quiz result page. And how can their comments be send to us or reported back to us in some form so that I can see what their comments were.

Check the settings for each quiz question to verify they are set to report a score to the quiz. At the moment, from what I can see in your Advanced Interaction dialog, they may not be reporting to the quiz.

How can I copy all the comments from my picture/s in fotostream to my picture/s in my library?

How can I copy all the comments from my picture/s in fotostream to my picture/s in my library?

Hi, first, you should prevent the iTunes library auto sync with iPhone: Launch iTunes > click Preferences... > click Devices. In the window, check the option 'Prevent iPods, iPhones, and iPads from syncing automatically'. Next, connect your iPhone with your computer via the USB cable. Click the mini menu for iTunes on the very top left and click the option 'Show menu bar'. After then you can see iTunes File, Edit, View, Control, Store and Help menus on the ribbon. Click File > Devices > Transfer purchases from (your iPhone name). You can also access to the File menu by holding down Alt (Option on Mac), Shift and F keys. This is how to get your iPhone purcahsed song transferred to iTunes Library.

How can i remove comments from the "tell your frie...

How can I remove comments from the "tell your friends how you're doing" section?

Please do a Skype reset.
Exit Skype : From the system tray >> right click on the skype icon and click "Quit"
Press WinKey+R
Type: %appdata% and press Enter.
Rename the folder "Skype" to "Old_Skype"
Run Skype.
You will need your password to re-log on, and re-set any options from default
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

How to Allow Comments from Reader?

Similar Messages

Maybe you are looking for