How to allow just some users to access FTP

Hi,
In CMSDK 9.0.3, is there any way to allow just a few users to login in FTP service and deny the rest? I know how to disable anonymous access, but I want that just two or three specific users access the repository through FTP protocol.
Thank you,
Daniel.

a. Do I have to give up remote management?
No.
b. How do I do it?
Select Remote Management in the sharing preferences and set your access controls there.

Similar Messages

Exchange 2013 Sp1 some users cant access owa

After I install new exchange 2013 with sp1 on windows 2012 R2 server one for mail boxes and the second Client Access, i move all mail boxes to it, then i uninstall the old server (exchange 213 with cu3).
All may exchange server’s virtual machines on hyper-v 2012R2
I install certificate and configure virtual directories
I notice some users can’t open there mail boxes from OWA they get a blank page after the enter username and password (from internal and external) (the same users can open outlook anywhere) at the same times many users can access owa.
After many restarts they can access OWA.
After some days some other users can’t access owa.
I remove ECP and OWA virtual directories, Then Recreate and configure it.
But the same problem some users cant access owa
I install a new client access server, configure it
But the same problem

HI
YOu can check below things to resolve the problem
Disable SSL from Default Web Site if you have enabled them
Check if you have set any redirection in the Default Website if so remove redirection and see the results
Ensure that you have a valid certificate for owa VD
check correctly the authentication type - windows authentication is enabled or if you have form based authentication enabled
Below is an example for enabling WA
set-Owavirtualdirectory -identity "servername\owa (Exchange Back End)" -WindowsAuthentication $True -Basicauthentication $false -Formsauthentication $false
Set-EcpVirtualDirectory -Identity "servername\ecp (Exchange Back End)" -WindowsAuthentication $true -FormsAuthentication $false
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you

How do I allow two account users to access pSE6 on their own accounts?

how do I set up PSE 6 to allow two account users on one computer to access pSE6 on their own accounts?

They can't share a catalog stored on the main hard drive, if that's what you want to do, but to just use the program separately, log in to the other user account, open PSE, and if PSE wants to register itself again, let it.

How to Allow the End User to Save a Form

How do I allow an end user to save form after they've filled it out? I understand this can be accomplished using the distribute function where you email the form to people. We don't want to do that. We want to put it on a website and allow them to access it, open it, fill it out, then save a copy to their hard drive (with the data they entered visible). I have searched the forums and cannot seem to find a solution for this. Thanks, in advance!

Hi Kyle. Thank you for the reply. I do have Acrobat Pro, so I will try that. To make sure I understand correctly, the form has to be create in LiveCycle Developer, then you have to open it on Acrobat Pro and set the permissions?

How do I set a user to access with ftp to his/her website folder ?

I am new to MacOSX
I come from Linux Server administrated with Virtualmin
I was able to setup with SLP 10.6.8
Now everything works but ftp ...
I want to do this:
1) web site domain1 = OK
2) mail user@domain1 = OK
3) mysql access user(domain1) = OK
---> 4) ftp user(domain1) = home web site domain1 = NOT OK ! <---
How to tell server to let user(domain1) access throught ftp and jump into his/her home site folder ?
This is necessary for me to grant access to his/her site home and upload, modify stuffs etc ...
Also I am using cms like Drupal, Wordpress and so on that can upload and install upgrades via web admin panel and with MacOSX isn't working !
Gimme some hints please Server Admin is too poor and I had to manually add user and link to relative services ... now i am stuck on ftp ...

It is in the process of being disabled. It will likely be some time next week before the code will be reverted.

Store an encrypted numeric value and make the unencrypted value visible to just some users in Apex

I'm looking for a way to store an encypted numeric value in one field in a table (so that it appears encrypted even to a DBA) and to display the unencypted value in Apex forms and interactive reports for some users but not others.
Any suggestions as to how I could achieve this?
Thanks in advance.
Martin

Try these documents:
Using Column Masking to Display Sensitive Columns as NULL Values
Using VPD in an APEX Application
Securing Stored Data Using Transparent Data Encryption
The features you request are Database Features.
You could use DBMS_CRYPTO for data encryption instead of TDE, but you will have to create a package for your insert,update, deletes along with a view that allows decryption based on v('APP_USER').
Also, you won't be able to search on that column if you use DBMS_CRYPTO.

How to see, if some user has done multiple login at the same time

Hi,
i'm looking for a tcode to see, if some user has done multiple login in a date-range.
Regards, Dieter

It is also dependent on your license type, as it is populated at logon - prior to any Z-coding option - which will cause a lockout if attempted an access that way.
I recently found a cool way to detect DB triggers and updates - very obscure...
However I also "move around" during support in projects and don't always want to kick myself out. I guess SAP can "work-it-out" from the various fields of the table to map the user behaviour.
Personally I dont believe that all of such information is appropriate for public domain, as all the SAP_ALLers out there combined with the types of authentication options are not always responsible with the information either.
Thankfully, SAP has added a "salt" to the password hashes now. They offer RZ11 login/password_downwards_compatibility as a workaround...
Take a look in your system!
Cheers,
Julius

How to allow normal/regular users to view a report

I have been compiling reports in MS SQL 2012 Reporting Services. the URLs is
http://test_report:80/reports. I have no problem with viewing the reports because I am an admin but normal users are getting access denied. this is how I assign permission to user. Open Reporting Services
Config Mnger --> Connect --> Click on Report Mnger URL --> click on
http://test_report:80/reports --> Open a another folder called Reports. In this "Reports" it has many reports. --> Click on Folder Settings --> Click on Security --> Click on "New Role Assignment" -->
In "Group or user name" text box, I entered user network computer login name, such as: domain_name\bambi --> Ensure "Browser" is checked --> Ok. I send this weblink to users but they cannot open it because of either access denied
or not have permission.
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fCorp_Reports%2fReportOfTimeInLieu. I am unsure why users cannot view my reports. Please let me know if I had missed any step(s). I use the Report Builders in Reporting Services
Config Mnger to compile reports. Regards,

so this web link will lead me to Home page:
http://myservername/Reports/Pages/Folder.aspx.
at the home page I have folder called Reports:
http://myservername/Reports/Pages/Folder.aspx?ItemPath=%2fReports&ViewMode=List
inside Reports folder, I have multiple reports, ie:
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfTimeInLieu,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfVacationTime,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfSickDays,
http://myservername/Reports/Pages/Report.aspx?ItemPath=%2fReports%2fReportOfConferenceDays
On Home page I click on Folder Settings --> Security --> New Role Assignment --> Group or User name: domainname\bambi --> Role = Browser
On Home page I click on Site Settings --> Security --> New Role Assignment -> Group or User name: domainname\bambi --> Role = System User
On Home page I open Reports folder --> Site Settings --> Security --> new Role Assignment --> Group or User name: domainname\bambi --> Role = System User
Is this how I enable user bambi to 1) enable to open Reports folder and also browse for reports in Reports folder 2) enable user bambi to execute all reports in Reports folder.
Problem: user bambi was able to open Reports folder and see all reports saved in it; however, bambi gets a blank page upon selecting a report and open/run it. bambi should see company logo and report name. It was a blank white page.
What did I do incorrectly?
Thanks,

Mac Multiple Users - How to exclude for some users?

Hi,
I have BBDM installed on a Mac with multiple users. A couple of those are children so I have Parental controls turned on, and BBDM excluded from their available list. However, when they log in BBDM is trying to sync artwork or something and continues to request administrator passwords many many times. When I install the BBDM in the Destination Select segment it asks whether to install for all users, but there is no choice to exclude for some users.
Is there a way to do this?
Thanks
Paul
Torch 9810; PlayBook 64g; iPad1 64g; iPad2 64g; iPhone6 64g Passport
Provider Bell (tablets all WiFi)

Hey luapekralc,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
When installing BlackBerry Desktop Software for Mac you only have the option to install for yourself or all users. My apologies, you can not choose selected users to have access to this application.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How to determine if a user has access to an item

Without using the WWSEC_API, i need to find out if a user (not the logged in user) has the right privileges to view an item (url).
Has anyone identified what tables are involved in determining if a user has access to view an item ?

Create a vo with the following SQL passing userid as bind value:
SELECT C.USER_NAME,
B.RESPONSIBILITY_NAME,
A.START_DATE,
A.END_DATE
FROM APPS.FND_USER_RESP_GROUPS_DIRECT A,
APPS.FND_RESPONSIBILITY_TL B,
APPS.FND_USER C
WHERE C.USER_ID = A.USER_ID
AND C.USER_NAME= :1
AND B.RESPONSIBILITY_ID = A.RESPONSIBILITY_ID
You will have the list of all the responsibilities of a user.
Kristofer

How to get list of users with access of MM01 (create & change)

Hi all,
i have to take out list of user having access for MM01 (create material), when i use SUIM to get the list it shows all the list of users including the users with DISPLAY & CHANGE, but i want only those users who had the access of CREATE & CHANGE.
please help out me, its very urgent.
Thanks & Regards
Syed..

Hi Syed,
You can try to get it from S_BCE_68001398. Key in the required transaction code.
Thanks and Regards
Points reward is much appreciated

How do I allow parental controlled users to access third party apps on the admin account?

I just set my son up with a separate parental controlled user account and he can't seem to access some third party games that we installed for him under my admin account. He has saved progress on these games that we don't want to lose, so I don't want to reinstall them. I checked them off as allowed apps, but when he tries to play- the game icon shows up in the doc then changes to the updater icon and they won't run. I've searched for answers to this question, but can't seem to find any. Please help? My son and I would be very grateful!

jeremiahfromva wrote:
Mavericks (isn't that an old Ford model?
Sure was! They used it on 4 different models. But that was Maverick, as in horse. This will be Mavericks as in ocean waves.

How to find if a user has access to view "all_directories" ??

A developer has complained that he cannot access view all_directories which he was able to access few days ago in production.However in development instance , he is able to query from the view all_directories.
How to compare the two access for the same schem ain two different instance ??

Vicky wrote:
Ask them to provide proof (screen copy-paste or whatever) indicating the failure.Yeah , you were right, they were able to query the table, but not returning any rows. ( they flabbergasted me...). They are telling me that earlier they were able to query and get output, but they are not getting any row now ....just no rows selelctedThat makes more sense - all accessible directories for the user removed by the administrators.

Locking a JSP Page i.e allowing only one user to access it at a time

Hi,
I have web application where multiple users can log in at the same time.
I have a JSP where a user is presented with a list of executable items.It is quite possible that at the same time more that one user tries to execute the same item.I want to disable this. i.e at a time only one user should be able to execute the item.
Currently what i can think of is putting an extra column in the database...saying that this item is locked and you cannot access it until unlocked.But then this would involve a round trip to database.I want to avoid it, and do some coding in java code itself.
But i dont know how to proceed.
Any Help......

sorry for the misdirection :(
yes..try using the synchronizing for the run process for of the item in the action class.
I shall try to provide you with the code changes, if can you please provide the back end code doing the job u said

How to allow non-admin users to install software updates of Java, FLASH and Adobe Reader?

Hi all,
I have a company (+150 users) and I would like to allow users to update Java, FLASH and Adobe Reader only.
These software are already installed in the hosts, but there are updates of the program every week and it needs to be updated.
How can I give permissions to every user in the domain to do that? Just "Java, FLASH and Adobe Reader"
Remember that I dont want distribute software because they were installed.
I tried to enable "Enable user to patch evelated products" directive but it didn't work at my domain.
is it possible?

I have a method that works for FLASH player, but am trying to come up with a method for the other 2 myself. To automate flash player, I created a Policy and added the following:
Under Computer Config, Prefrences, Windows Setting, Files I created a new File Item.
I set Action = Replace, Created a Source File named mms.cfg* (more below) and have the destination file as systemroot%\System32\Macromed\Flash\mms.cfg (or %systemroot%\SysWOW64\Macromed\Flash\mms.cfg for x64)
I used notepad to edit the mms.cfg, and used the following in the body:
AutoUpdateDisable=0
SilentAutoUpdateEnable=1
AutoUpdateInterval=0
My non-admin users now update flash in the background silently and automatically.

How to allow just some users to access FTP

Similar Messages

Maybe you are looking for