How to allow learners comment about course after the quiz result page?

How do I go about allowing the leaners to comment on the course they have taken which should appear after the quiz result page. And how can their comments be send to us or reported back to us in some form so that I can see what their comments were.

Check the settings for each quiz question to verify they are set to report a score to the quiz.  At the moment, from what I can see in your Advanced Interaction dialog, they may not be reporting to the quiz.

Similar Messages

  • How do i prevent a slide that is after the quiz results page from showing?

    HI guys, I am trying to achieve the following in Captivate 6:
    1) Users answer questions. They have 2 attempts to pass with 70% or above.
    2) At the quiz results page, if the score is less than 70%, users get a button to retake the quiz. After the second attempt, If the percent is 70% or above, they can click a button to view a certificate or click a button to see a transcript. If the percent is less than 70%, they click a button to get a transcript but NOT a certificate.
    How can i accomplish this since i cannot add buttons to the quiz results page.

    Thanks for the feedback.
    I am trying to implement a simple hide/show routine and it does not work. This is what I want.
    I have two buttons (one to save a certifcate and one to save a course transcript).  I want to display those on the quiz results screen. The user has two chances to make a 70% or more on the quiz.
    If the user obtains less than 70% score on the first try, on the quiz results slide I want to hide the button to save the certificate but keep the one for the transcript. If the user passes with 70 or more, then both icons remain on screen.
    IF the user obtains less than 70% after the second try, the quiz results should only show the transcript button. If they pass with 70% or more, then both icons remain on screen.
    I tried advance interactions to hide or show the icons in the "on slide enter" on the quiz results screen but that did not work.
    This is an example of what i tried. if cpQuizInfoQuizPassPercent is less than 70% hide btncert. I also tried hiding the button and then assigning actions to show the button on passing the 70% but that did not work either.
    Suggestions?

  • I accidentally deleted a button I need on the quiz results page in captivate 8. How do I get it back?

    I accidentally deleted a button I need on the quiz results page in captivate 8. How do I get it back?

    Go back into Quiz, Preferences, Pass or Fail. Uncheck 'Retake button' and check it again, it will reappear on the Score slide.

  • How can I change the language for the Quiz Results page?

    How can I change the language for the Quiz Results (labels on buttons and text labels)? Is this possible only manually each time, or are general settings possible?

    For Quiz Slides you've already added to your project file you will need to change the labels manually.  If you change your Quiz Settings and Master Slides that control the defaults and then add new Quiz Slides, THEN those slides will carry your new settings.

  • How do I get the Continue button on the Quiz Results page to work?

    I found an older discussion about this topic and tried everything suggested. My colleague and I have been researching this issue and have yet to find the answer. Does anyone out there have the solution?

    Maybe yesterday you succeeded, passed. In that case the Continue button will work, because it triggers the action that you specified in the Quiz Preferences (Continue). But if you fail, you are stuck on the Results slide, because the Continue action for Failed will only be done after the attempts are exhausted. Why did you create an extra slide? You can edit the Results slide, but please, keep the buttons that are embedded in that slide because they provide the functionality that you need.
    You can add a shape button to the Score slide if you want an extra button to retake the course.  I hope you are using CP6 or later?
    http://blog.lilybiri.com/question-question-slides-in-captivate
    http://blog.lilybiri.com/question-question-slides-part-2
    http://blog.lilybiri.com/want-a-button-on-question-slide-in-captivate
    Lilybiri

  • How do I only get certain questions appear in the quiz results?

    I have created a course through Captivate 6, throughout the course there are questions to guage the learners attention. There is also a quiz at the end. However, captivate includes on the questions throughout the course on the quiz results which I do not want to happen.
    Can anyone advise how I can only get certain questions appear on the quiz results please?

    Branch aware turns off the playbar in 6 (not in 7 any more, at least not for me).
    Could you explain more in detail what you want, because I don't understand it. You want the user to answer all questions, but the score should only show what? If you don't want some questions to have a score added to the Quiz total, you can indicate that in the Properties of that Question slide.
    And please, tell the exact number (3 versions of 6), and also if you have to report to a LMS?
    Lilybiri

  • How to retain the master slide background at the end of the quiz reporting page of a project

    I have noticed that the content of the master slide is not retained till the end in the quiz results page of the project. What should I do to retain the contents till the end of the project?

    Hi,
    Thanks for your time. I have checked the transitions. i didnt give any transition to the slides in the project and i also check the preferences too, i had disable the options that is to fade in and fade out. My problem is "I have 12 slides in this with an intro slide and 10 question slides and then the quiz results page. In that result page, it is showing the result at the end of the result slide the pause button in the skin turned to play button. While clicking that play button it shows only the results, review quiz button and retake quiz button only. It doesn't display the images, widgets, text and some other options which is used in master slide or in the slide itself " Why those things have disappeared? Can you guide me how to overcome this issue.
    The solution for the playbar is quiet good. One more doubt in that, The play bar should be displayed in that page but it should be disabled, Is there any solution for this? If yes, kindly share with me

  • How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    How to get a question in the course placed anywhere in the course and does not appear in the quiz result or total number of questions. Pretest would work except it can't go anywhere in the course (at least for me it can't)

    Use a normal question, and do not add the score to the total score. That will give you a correct score at the end. But the total number of questions, that system variable will still take into account all questions. You'll need a user variable, and calculate its value by subtracting 1 from the system variable cpQuizInfoTotalQuestionsPerProject. Same for the progress indicator if you want to show it?
    Customized Progress Indicator - Captivate blog
    If you want to allow Review, you'll have to tweak as well. You didn't specify the version, and all those questions I now mentioned.
    And my approach, since you talk about only one question: create a custom question, because you'll have total control then.

  • The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

    The beta page and Test Pilot page come up EVERY time I use Firefox. Same information so why not allow us to bypass it after the 1st or 2nd or 3rd reading?

    That is not normal behaviour, for possible causes see [[Firefox has just updated tab shows each time you start Firefox]].

  • How to use a pull down menu after the 2.0 update

    Hi,
    I'm looking for help on how to use a pull down menu after the latest update. The method I was using before no longer works and it's driving me crazy.
    Has anyone else had this problem and figure out a new way?! 
    I was holding my finger down on the pull down menu and waiting for the options menu to pop up, I'd push cancel and the menu would stay. This no longer works.

    Also would love to know plz

  • How do I get the top links in the search results page to display the folder?

    In the search results page, if you click on the top link from each result, it only brings up the description. Not much use as a link, so was wondering how you display the folder from this link.

    Is this for the general public or just for you?  If it is for the general public then insert this code at the top of the page:
    <TITLE>---</TITLE>
    <META HTTP-EQUIV="Pragma" CONTENT="no-cache">
    </HEAD>
    And also at the end of the file after the closing body tag:
    </BODY>
    <HEAD>
    <META HTTP-EQUIV="Pragma" CONTENT="no-cache">
    </HEAD>
    </HTML>
    It is unorthodox but it works.

  • How to get the output .pdf file of a quiz to report to the quiz results analyzer on my internal server (mamp)

    I created a quiz.
    Created an internal server on my compute rising a MAMP.
    When I publish my quiz using the multi-file publishing options...
    I am able to use both the "HTML" and the "swf" output files to complete a quiz and reporting the results to the quiz results analyzer.
    However, I am unable to get the output .pdf field to reporting to the quiz results analyzer.
    Any help? Would this issue have to do with the Acrobat Professional setting? Captivate setting? My internal server setting? or output fuel placement?
    I tired to put the .pdf file in the same MAMP root folder location as my "internalserverreporting.php and internalserverread.php files.
    Thanks for the help.

    Hello Varun,
    You cqan submit the report as a JOB and export the out put to memory, once the job is complete you can read the list to display the output.
    Cheers,
    Mano
    Cut & Paste form SAP help.
    Submit report ....
    EXPORTING LIST TO MEMORY
    Does not display the output list of the called report, but saves it in ABAP memory and leaves the called report immediately. Since the calling program can read the list from memory and process it further, you need to use the addition ... AND RETURN . Also, since the called report cannot be requested for printing, the addition ... TO SAP-SPOOL is not allowed here. In addition, you must not assign a function code to the ENTER key in the current GUI status. The saved list is read from the SAP memory using the function module 'LIST_FROM_MEMORY' and can then be saved to the database using EXPORT, for example. You can process this list further with the function modules 'WRITE_LIST', 'DISPLAY_LIST' ... of the function group "SLST".

  • Why does fix capitalization work when there is only one space after the period in pages 09?

    why does fix capitalization work when there is only one space after the period in pages 09?  For example:  "Turn on 3rd St. After the traffic light."  There is only one space after the period in "St."  shouldn't it only auto correct after TWO spaces..??  the word After, should be after..

    You may also use a noBreak space after the period at the end of the abbreviation.
    If I remember well, in such case the capitalization will not apply.
    Yvan KOENIG (VALLAURIS, France) mercredi 27 avril 2011 23:34:46

  • How to write strings with an underline on the TOP-OF-PAGE of ALV

    How to write strings with an underline on the TOP-OF-PAGE of ALV

    if u r using classes and methods it can be done
    but if u r using normal fms and then u have to use HTML_TOP_OF_PAGE but the drawback for this it cannot be printed when the report is printed .

  • How do you print comments that extend beyond the field?

    I have created a form in LiveCycle Designer 8.0.  It contains a text field that allows recipients to write "beyond the size of the field" if they desire.  When we recieve the completed form, of course, we can view the extended comments by clicking on the + sign.  But, when we print the form the comments are cut off at the end of the box.  How can we print the entire comment directly from the PDF without having to cut and paste into another document?  Thanks.

    One easy way to resolve this is to change your form to a dynamic form and make that field expandable. To do this, save the file as "Adobe Dynamic XML Form". You will need to change the layout of your form to make it Flowed vs. positioned but before you do that, you will want to prepare the form for this.
    Flowed forms layout the fields for you and place each field below the last so you can't control the layout. Positioned layout allows you to put the objects wherever you want with the caveat that you can't expand fields.
    What you want to do, is highlight all fields that are positioned and wrap them into a subform. Leave the field you want to expand out of this subform. Then, on the page in Hierarchy view, select the page and the object view and choose Subform "Flowed". Now, on the object that you want to expand with text entry, do the following: on object view, check "allow multiple lines" and "allow page breaks within content"; under layout under height check "expand to fit". Click save and preview. Make sure to change preview settings to Preview Type: Interactive; Preview Adobe XML Form as: Dynamic XML Form.
    I will try and attach an example.
    Mallard27

Maybe you are looking for

  • Nothing Shows up in my Printer Queue

    I have a HP Colour Laserjet CP1515n. I've connected through a USB cable not Via the network. I have installed it and all works fine besides from one thing. Whenever I send a document to print it prints straight to the printer. Therefore nothing goes

  • How do i see what is using space on startup disc

    I am trying to see how much space is being used on my computer in the different areas; documents, photos, videos, etc.  To see what i can delete to free space.  Is there some way to check this?

  • Table for po effective value

    Hi, I need to develop a purchase order report, so I need the following gross price  : 100 fright        : 10 insurance : 10 my net value is : 100 rs Effective value : 120 rs Where can I find ( table) for this effective value fright and insurance I ca

  • Problem with the clientinstallation runtime and merge module

    I'm using CR XI SP4 and as a data source I use a XML file that was defined with a XSD. From my application I generate a XML file and start CR through a Delphi component. As a parameter I supply a RPT file without data. That's all working. Now I want

  • How to get the materials consumption data

    Hi expert, My requirement is to show the material ordered, material received,material consumption,material stock against project definition... 1. I got the materials ordered and material received against PO of that Project definition but they tell to