How to allow Teamviewer while blocking Uncategorized URLs

Hello All,
I would like to allow Teamviewer while blocking Uncategorized URLs.
Uncategorized URLs have been giving me some problems since many unwanted webpages leak trough this category, but when I blocked, Teamviewer stop functioning.
I found that Application Visibility can identified Teamviewer successfully but since there is no "Allow" action for this, I dont know how I can get to make it work.
Thanks!

Hector
You have a couple of options:
1. Go to the Cisco Iroport support site, and submit it for categorization  https://securityhub.cisco.com/web/submited_urls (requries a login).  Your box will get it in a few hours.
2. TeamViewer uses a user-agent string of "DynGate"
Create an Access Policy above the one that's currently blocking the uncategorized stuff (Web Security Manager/Access Policies) .  At the bottom, there's a section labled in blue called "Advanced".  Click Advanced to open it up, and click "None Selected" next to User Agents.   In the Custom box enter "(DynGate)"    Under URL Filtering, leave everything to Use Global Settings, except Uncategorized URLs.  Set that to Monitor.
You could also create an identity using the user agent string, and then create a similar policy using the identity...
Ken

Similar Messages

  • How to encrypt Password while calling Portal URL from Abap

    Hi all,
    My requirement is to call portal from R/3 4.6C.  As part of it I'm calling Portal URL along with user id & Password by using the FM CALL_BROWSER. The problem here is User ID & Password are visible everyone in the URL.
    Is there any way that I can encrypt sothat it doesn't become a security issue?
    I really appreaciate for your help.
    Thanks
    Seshu

    can you please mention the abap code  by which you are sending the username and password to a portal via url.....
    are you able to log on to the portal...please share your code ......
    Edited by: Ashutosh Shukla on Apr 18, 2008 9:17 AM

  • How do I deactivate your censor of URLs - I have no children & it's a pain every time & have to override your block - only started this latest version.

    How do I deactivate your censor of URLs - I have no children & it's a pain every time & have to override your block - only started this latest version. edit
    Details

    Firefox doesn't censor or control.
    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • I want to buy a wireless headset for my iPad that will allow me to lissen to a video while blocking out any other sounds in the room yet is comfortable. I do not have any experience with headsets so I do not know what to expect.

    I want to buy a wireless Bluetooth headset for my iPad that will allow me to listen to a video while blocking out any other sound in the room. I tried a philips 6000 earplugs but it was not good at blocking out sound. Can anyone give me some suggestions. I see lots advertised but do not know which one to chose.

    Take a look at HeadRoom (headphone.com). It's a fabulous resource for all types of headphones, with great guides and useful reviews.
    http://www.headphone.com/

  • How do I stop Firefox blocking my bank log in sites, when I click allow the bank resets to default which then Firefox blocks again.

    Every time I try logging into my bank accounts ie Nat West, Lloyds or Barclays I get the Firefox pop up bar saying "Firefox prevented this page from automatically redirecting to another page" and when I click on allow the bank log in page goes back to their home page, this means I now can't log in to my bank accounts. Can you please tell me how I can allow sites without the blocked pop up occuring.
    Dawlish 1.

    Un-checking the redirect block is a Global setting. I want to know how to allow redirect for sites I use every day as friendly sites. I do not want it turned of for the entire world wide web. Otherwise, why even have this security setting at all? I've already added my usual sites to my Privacy exception list but that list is ignored by the redirect security warning.

  • How do you authorize access to itunes while blocking the access of the rest of the computer?

    How do you authorize access to itunes while blocking the access of the rest of the computer? I want to do a party and let people have access to the music but  I don't want them to look in my files. I have windows 7.
    I cannot log off and let the music play. Ideally I would want to have a password for access to the rest of the computer.
    Thank you!

    The following may help with the file sharing issues: OS X Mavericks: Share your files

  • How can I block a url from accessing my browser?

    I want to block a url from accessing my browser. The url in question, djbsaqja.co.cc, flashed a pop-up saying that my computer was infected with a dangerous virus and that "Windows Security" required that I download a program to fix it.
    I maintain realtime virus protection, but ran a manual scan anyway, which proved that I was clean.
    The url listed above would not let me out of an unending chain of popups, demanding that I download their tool.
    Instead, I opened a new Firefox session (it was the only way I could re-enter Firefox without this rogue url taking control), then cleared out my history, cache and cookies.
    I'm clean...and now I'm back in control with, I believe, no damage. But since I wrote down the url, is there a way that I can block from accessing my browser again?
    Thanks for the help.

    You can add it to your hosts file - http://allthingsmarked.com/2006/08/28/howto-block-websites-using-the-hosts-file
    Sites like that pop up on a regular basis, but will often get taken down quite quickly. I have just checked and the site appears to have been taken down.

  • How to block a payment in F110, when the system does not allow us to block

    Hi all
    Blocking of a payment happens in the following areas :
    1.  In a single document Fb02 transaction we can block a document by giving A as option for not paying for that document before going to F110.
    2.  We can also block a vendor through Vendor master area
    3.  We can block a Vendor from paying through Xk05.
    Now my doubt is that.... i had saved a proposal in F110, after saving it, now i want to block a payment for a vendor.  But the system does not allow me to block it.  Why the system does not allow the block.  Or is there any type of error like this, that system does not allow the block after setting up the proposal for payment.
    Can anyone help me out in this...
    thanks and regards
    SL

    Dear,
    Even you set payment block after saving the proposal system will execute that payment. So better you delete this proposal and then set payment block in the vendor line item. Thereafter system will pick that bill for payment.
    Regards,
    Chintan Joshi

  • How to allow only part of users in AD login sharepoint?

    We have a SP2013 farm using windows authentication. On the AD there are 10,000 user accounts and we have no edit permission on AD. (Hence, I cannot setup any group there) As the Sharepoint admin I only have a list of 1,000 users allowed to access. There
    is no existing group setup to indicate these 1,000 users.
    My question is, how can I allow these 1,000 user login Sharepoint while blocking the other 9,000? 
    My concern is these 9,000 users will get their My Site self-created when he browse the My Site web application. Another concern is when they access some page without authorization, they will get a form allow them asking for access. The site owner may grant
    access to them by mistake which I need to avoid.
    Thanks.

    Hello Mark,
    Regarding the second part of your question. You can uncheck the option 'Allow requests for Access', it is described how in the following thread:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/d1e948cf-6289-48f9-9f25-81b57b292c40/how-to-hide-request-access
    - Dennis | Netherlands | Blog |
    Twitter

  • Method to load images while blocking thread

    Hi!
    I'm new to Java and have been researching how to do the following for hours with no real success:
    I need a way to load an image (jpg/gif/what have you) while blocking the thread it is running in.
    I do not really want to use MediaTracker because it feels much too complicated for what I need. Here is a code snippet:
    private Thread getImages = new Thread(
              new Runnable(){
                   public void run() {
                        while(!imgNameList.isEmpty()){
    String imagePath = imgNameList.remove(0);
                             ImageIcon image = new ImageIcon(getDocumentBase(), imagePath);
                             if(image.getImageLoadStatus() == java.awt.MediaTracker.COMPLETE) {
                                  imgList.add(image);
                             This thread is initiated by my applet, and I just want it to do something very simple. I want it to load ALL the images from the URLs in imgNameList ArrayList<String> and if they are valid images, add them to the imgList ArrayList<ImageIcon>.
    I do not understand why my code does not work.
    I have read in multiple places that ImageIcon blocks the thread. But the condition mage.getImageLoadStatus() == java.awt.MediaTracker.COMPLETE is not ever true.
    I am totally exasperated by this inexplicable behaviour.
    Any advice will be greatly appreciated.
    Many thanks.

    Thanks for the replies.
    The URLs were correct.
    ImageIcon already implements MediaTracker by itself in the background, so I really don't want to have to do it myself.
    The status was always 4.. ERRORED.. even if the image loaded just fine anyway, as in I could display it after.
    I suspect it may be some strange thing due to Applet permissions or something of that sort. Eventually I gave up, so I just did as follows:
    ImageIcon to load the image.
    Get the height of the ImageIcon to do two things:
    A) Make sure that the image is actually loaded (not just returning right away like GetImage)
    B) Make sure it's a valid image (i.e. height greater than 0)
    When I have some time I'll look over this carefully but for now it works so it'll have to do.

  • WRT 110N Website Blocking by URL

    How can I deny access to a domain name no matter what they load, like this:
    http://www.mydomain.com/launcher
    http://game.mydomain.com/controller
    http://system.mydomain.com
    any of those, how can I block, every day, all day, the domain like this:
    *.mydomain.com
    so that it will always block that website?
    I cannot seem to get the url block to work except if I make a policy with allow, but how does allow block something??
    Thanks,
    Richard

    Ok, I updated the firmware to Firmware Version: 1.0.07 the newest one available for the WRT110
    I set the following in access restrictions:
    Status: enabled
    Access Restriction: all ips 192.168.1.1 to 192.168.1.200
    Schedule, Days: 7 days per week
    hours: 24 hours
      <script type="text/javascript">// translate_strWrite("AccessRestriction",28); // </script> URL 1: www.google.com
    everything else I left blank...
    Now nothing happens, nothing blocked, everything works.
    What should I try now?
    Thanks,
    Richard

  • How to query two data blocks simultaneously?

    Dear all,
    Need your inputs on the following problem statement...
    Existing Functionality:
    We have two data blocks A (Parent) and B (Child) in a relationship. Both data blocks refer to different tables.
    Data block A is the query data block and for a single record in block A we can have multiple records in block B. Multiple records in block B are shown one at a time after executing a query, this is implemented by using a list item C (belongs to a third block).
    For example
    Let us say block B can have 5 different types of entries for each record in block A. In this case the list item C will have 5 values corresponding to these entries. Once the query is executed, block B will show the default entry for the queried record in block A. To see other entries for the record user can select the required value in list item C and corresponding entry in block B will be fetched.
    Requirement:
    Our requirement now is to enable querying upon both data blocks A and B simultaneously. To implement this I replaced data blocks A and B with a single data block X which is based on the join of the two tables referred by the Data blocks A and B earlier. As the fields should allow insert, update, delete operations we did not use a view here.
    Issue:
    Now the problem is, each record in block A for which block B had multiple entries earlier is now getting listed multiple times because of the join.
    I have tried but could not find any solution for this. I would appreciate if any of you can suggest how we can query both blocks simultaneously without affecting the existing functionality.
    Thanks,
    Amit

    I don't understand your requirement in detail. I try to repeat what i understood so far.
    You have a master-block A based on a table A and a detail-block B based on a table B. So far so good. You can now query based on conditions just the datablock A, because B is a detail and therefore can only be queryied in context of block A.
    Your reuirement is to query on both blocks A and B and find block in B also without giving conditions for the relevant block A.
    Is it that ?
    What i don't understand, what is block C used for?
    An idea for the querying of block B's data: Create Non-database-items items in block A for the search-criteria you need on block B and make them Queryable.
    In the PRE-QUERY-trigger on block A build a WHERE-condition if that search-criteria is entered, something like
    IF :BLOCK_A.SEARCH_CRITERIA_FOR_BLOCK_B IS NOT NULL THEN
      SET_BLOCK_PROPERTY('BLOCK_A', ONETIME_WHERE, 'WHERE PKVALUE IN (SELECT FKVALUE_TO_A FROM TABLE_B WHERE FIELDVALUE=' ||:BLOCK_A.SEARCH_CRITERIA_FOR_BLOCK_B)');
    END IF;This would query also records to A for which you want to have the B-records. So you could keep block-structure up to master-detail.

  • How to allow the special character in folder or filename

    when i add the special character "&" in folder or file name it gives following error
    "The file or folder name "P&A" contains invalid characters. Please use a different name. Invalid characters include the following: ~ " # % & * : < > ? / \ { | }. The name cannot begin or end with dot and cannot contains consecutive dots."
    how can i allow these character in folder or file name.
    waiting

    Hello to everybody
    It's ok for the ~ " # % & * : < > ? / \ { | } characters, they cannot be allowed,
    but in a lot of languages there are letters like  è é à ù ò that are accepted for path and/or filename;
    how to allow these characters? Moss indexes them but when doing some searches and clicking on these files, in the new internet explorer windows the file cannot be opened abd examining the url the è é à ù ò are replaced with other character.
    Thanks in advance to everybody
    Regards to all
    Roberto GerlandoGerly

  • How can I filter or block foreign language emails or email addresses

    How can I filter or block foreign language emails or email addresses??
    TIA
    C

    Most email clients have a provision to create a 'rule'. The rule examines the email as it is received. In generally you can search for specifically senders, recipients,subjects, or specific content words in the body. Based upon the findings of the rule, you can do something with the email (such as end it directly to the Trash).
    For example if you know where all of valid you emails come from, you can create a rule that checks the from field for an acceptable sender and sends those email's that to the inbox, while sending all emails from other senders to the trash or spam folder
    Keeping out foreign language emails is often difficult because because often it is difficult to come up with a rule that will catch them on the basis of language they are written in.
    There are also commercial products that can scan incoming email and 'score' the email based upon content, and you decide at what 'score'  you want the mail sent straight to the trash or spam folder. Verizon's spam filter does this based upon Verizon's scoring system, and actually does catch a lot of spam. It also occaisonally catches things that are not spam however....
    Hope that is helpful

  • How do I stop or block caches?

    I am now on Mountanin Lion.
    I have been able to block cookies by using the Safari preferences to do this.  However I still get hundreds of "Caches" from God only knows what websites that still appear in Safari until I remove them.
    I don't trust caches because I think they are cookies in disguise gathering data until I slip up and turn off the cookie blocker.
    What are they?  How can I block caches as I do for cookies?  Why isn't there a "caches blocker" as is done with cookies?
    Also, the "Do Not Track" website thing doesn't appear to have any effect on either cookies or caches.
    Suggestions or edification welcomed.

    I have not blocked any file (or done anything).  I just find it odd that Safari allows me to block cookies but it does not allow me to block the hundreds of caches that pop up from hundreds of websites each time I surf the web.
    No one can even tell me what information is in these "caches".
    Thanks for trying though.

Maybe you are looking for