How to allow user to see salary button in assignment Window

Dear,
We wanted to dis-appear Salary button in assignment window; therefore we used task flow to visible or un-visible salary button and working fine but by clicking salary button showing error "Function not available for this responsibility. Change responsibilities or contact your System administrator'
pls advice what is the missing setup.
--thanks

Thanks for answer,
Could y please tell me how to personalize that salary button for particular user on the basis of Grad, let me explain
Responsibility: HR User, HR Recruiter, HR Data Entry
There are three responsibilities, for first two salaries button are enable through work flow while last one is disable.
------- Requirement
1. I don't want to apply any condition for "HR User" responsibility
2. For 2nd responsibility would be condition base if 'A' user then salary button enable if grad like a,b else disable for HR Recruiter responsibility .
Please advice
-thanks

Similar Messages

How to allow user to see attachment without login in 11i through browser ?

Hi,
I have one requirement where I need to show attachment to user even if He is not logged in.
We created Function which return Attachment File URL using seeded API.
When we paste that URL in browser it asks for login for Oracle Apps version 11i but for version R12 when we do the same the attachment gets downloaded.
Regards,
Ajay Sharma

HI Ajay,
I have one requirement where I need to show attachment to user even if He is not logged in.
We created Function which return Attachment File URL using seeded API.
When we paste that URL in browser it asks for login for Oracle Apps version 11i but for version R12 when we do the same the attachment gets downloaded.I think its not possible in 11i
this is how it is designed
we cant bypass login credentials
correct me if I'm wrong
;) AppsMasti ;)
Sharing is Caring

How to allow user print their draft anwsers before sending it as final ?

How to allow user print their draft anwsers before sending it as final in a form central questionnaire ?

Hey MTdev,
Panel close? events cannot be triggered on a VI being viewed or controlled remotely. Some more information on that can be found in the help here:http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/vi_panel_closeq/. My suggestion would be to set the Title Bar on the front panel of your remote VI to not be visible so that their only option for closing the window is to click the logout button. Are you using Remote Front Panels(http://zone.ni.com/devzone/cda/tut/p/id/3277) to do this instrument control? Using remote front panels allows you to manage a lot of the multiple people accesssing at the same-time type issues so it may be something to look into if you are not already using this method.
Regards,
Kevin
Product Support Engineer
National Instruments

How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?

Hi,
How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?
I need to give user an option to do so, without the intervention of any Administrator. I also do not want to make user a Administrator else he will be able to login in weblogic and can do any damages unknowingly.....
Regards,
Rahul

Hi,
Replace the line in the instantconfig.xml
<WebMessage name=”kmsgChangePasswordLink”><!–<HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML>–></WebMessage>
with
<WebMessage name=”kmsgChangePasswordLink”><HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML></WebMessage>

Does Captivate 8 have any facility to allow users to see a word definition upon clicking/hovering over text in a Captivate project?

Does Captivate 8 have any facility to allow users to see a word definition upon clicking/hovering over text in a Captivate project?

You can have both clicking and hovering. But you need to add the definition manually for every such word.
Sreekanth

Anybody knows that how to Allowing user Customization at runtime for portle

Anybody knows that how to Allowing user Customization at runtime for portlet.
What i want is to let user Customization persist to the repository. (not session). bu tmy testing accodring the Jdev 11g guide shows not working for portlet..
Any body knows how to do this for portlet ? Web center 11g
thanks a lot.
Wayne

Hi Wayne,
You can only save runtime customizations to the repository for the users present in jazn-data.xml file (If you are using file based security).
You will have to do the following before you can start saving user customizations:
1. Create Webcenter Template project.
2. Apply ADF Security
3. Use page-definition files for jspx pages.
After this, whatever customizations you do, will be saved to persistence storage.
Better would be to try this on server. Since, before deploying, you run the pre-deployment tool, which will take the MDS Repository path as an input and store all persistence storage there.
If there is nothing in that location, you can be sure something is wrong and debug it.
Hope that was helpful.
Regards,
Kunal Chheda.

How can I disable Minimize, Restore & Close buttons of MDI window?

I'm using Forms6i on Windows XP
How can I disable Minimize, Restore & Close buttons of MDI window?
An urgent reply would be apprecaited.
MURUGESAN.T

in windows property
list of this
close allowed
move "
resize "
maximize "
minimize "
all to set "no"

Using Cap6, need to create menu screen that allows user to click a button, branch to other screens, and return to main menu. When returning to the main screen the button that was clicked will be grayed out or inactive. How do I do this? I created image

I am trying to emulate a piece of equipment. I need the user to be able to click on specific buttons that will take the user to another screen(s). After viewing those screens the user will be directed back to the main screen where the user would know which buttons had been pressed and which still needed to be pressed. I create image buttons with the 3 states - that worked except when the user returns the slide is reset and so the user does not see the 3rd state of the button. How can I get that 3rd state to stay after user returns to the main screen?

Hi Elizabeth,
Since I just did this morning what you are currently attempting to do, I thought I'd share my method. I must provide a disclaimer and tell you that I am not an expert in Captivate advanced actions--like you, I am still figuring them out. However, I am happy to share here anything I have learned thus far.
First, here is what my initial slide looks like (see interaction slide below). I created all of the icons (including the 'grayed out' icon on the second screenshot) in a few minutes using Adobe Illustrator. The icons have been imported as custom multi-state buttons so that I could have the desired effect when the user hovers over the image--the yellow 'explore' flag appears only when the mouse is over the icon. When the learner click either image, they are sent to the corresponding slide. Once both slides are viewed, a 'continue' button will appear at the base of the screen (something I've not figured out--I sent an email to Lieve begging for some guidance).
The initial slide (interaction slide):
Second, here is a depiction of what happens when the learner returns to the interactive slide from the content slide (see image below): Once the learner visits the 'Battery Content' slide and then returns to the interaction slide, the images have changed. The multi-state button is hidden (through the advanced action), the replacement image (the image with the completed banner over it) is shown, and a hidden click box to allow the user to return to the previously visited page (just in case they desire to do that) is "shown" to allow navigation since the button is no longer there (because it is magically hidden).
Content Slide 1:
Remember, there may be an easier way to do this in Captivate. I am using Cp6 for this module.
1. I created two user variables as follows
Name: v_batteryExplore
Value: 0
Name: v_fuelExplore
Value: 0
2. I created an advanced action for each as shown below (showing only one--duplicate the first and change the names to match the content):
Credit: I learned these steps from @Lilibiri and Dr. Pooja Jaisingh!
I have also noticed that it matters where the buttons are located on the timeline. It seems best to have buttons above all other content. Not sure why, but I have had images not appear when I have not done this.
And the last step you do not want to forget; you need to remember to tell Captivate to use the action.
As a final note, remember that the elements you do not want to appear on the initial screen must not be initially visible. Make sure to set them to invisible by removing the checkmark in the 'Visible in output' box located next to the button name. In my case, the image of the completed battery and the invisible button to allow a revisit of content was initially hidden. Here is a final screenshot of my timeline for this interaction. I hope this information helps you!

How to allow user refer back to lecture when they are taking a quiz?

Hi everyone,
I'm new to Captivate and now I am kinda in a dilemma. Thanks for your
time watching my post!
I created a CBL in Captivate 3, the first 10 slides is a lecture and it
is followed by a 10 slides quiz set as SCORM standard.
I want the learner to be able to refer back to the lecture when they
are taking the quiz, I tried to in 2 approaches and they both have
issues in different ways.
Approach 1: "allow backward movement", and "infinite attempts". The
problem with this approach is, when the learner click "review the
quiz" and when they click "back" on the first quiz slide, the whole
quiz will be start all over, the score is flipped back to zero.
Because the quiz seeing this as a new attempt, and the learner is
allowed to make "infinite attempts" as it was configured.
Approach 2: Set "allow backward movement" and allow only "1 attempt".
The problem with this approach is, when the learner is in the middle
of the quiz and refers back to the lecture, the quiz will be
automatically shown as completed. And the learner will not get a
chance to answer those unanswered questions.
So it looks like whenever I let the learner refer back to the lecture
in the middle of a quiz, the quiz will be seen as completed!!! What am
I doing wrong? Is there a better approach that I can "allow backward
movement" and still allow user resume their quiz from where they left
off?
Sorry for the long post, I was not able to express it in a more
concise way.
Any help is really appreciated!!
-David

What you are seeing is the behaviour as-designed in Captivate for quizzing.
Each Captivate movie has a "quiz scope" which begins with the very first scorable object, and ends at the Quiz Results slide. If you enter the quiz scope by starting a quiz slide, then jump back outside the quiz scope, by going back to the main content, Captivate's default behaviour is to freeze the quiz at that point. So when Captivate refers to Allow Backward Movement, it's only talking about backward movement within the quiz scope.
For example, if you get to question 1 but don't answer it and go to question 2, then answer that one, and go back to question 1, you'll still be able to answer question 1. The quiz won't be frozen. However, if you had jumped back to any slide before question 1, your quiz would have been frozen with whatever score you had accumulated at that point.
There may be a workaround you can use to get closer to what you want. Since any scorable object is classified as being part of the quiz, you can add a button on one of the very first slides that the user needs to click in order to advance. Set the properties of this button (or click box) to report a score to the quiz. This makes it part of the quiz scope. Now any content slides that fall after this button slide are also within quiz scope and moving back to them will not have the same effect of freezing the quiz.
Please bear in mind one more aspect of quiz questions: If you answer a quiz question, and then move off the slide (forward or back) that quiz question answer is frozen and cannot be changed unless you Retake the Quiz or relaunch the entire module.
Hope this helps clear up the way things work.

How to allow users to mount a Samba shares on a WXP

Through lots of reading I've managed to get an understanding of how to mount SMB shares at bootup by placing the proper edits in /etc/fstab. While having the shares of the server, running Contribs.org SME Server 6.01 (recently known as Mitel SME Server) and acting as a samba server, being mounted at startup is perfect since the server is always on. This is not the best idea for the XP workstation since it isn't always on. Here is a copy of my present fstab file with x's replacing the passwords.
fstab [B---] 0 L:[ 1+19 20/ 21] *(1085/1086b)= . 10 0x0A
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /proc proc defaults 0 0
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
tmpfs /tmp tmpfs defaults 0 0
sysfs /sys sysfs defaults 0 0
usbdevfs /proc/bus/usb usbdevfs defaults 0 0
/dev/cdroms/cdrom0 /mnt/cd iso9660 ro,user,noauto,unhide 0 0
/dev/cdroms/cdrom0 /mnt/dvd udf ro,user,noauto,unhide 0 0
/dev/floppy/0 /mnt/fl vfat user,noauto,unhide 0 0
//192.168.2.2/stuff /mnt/silicon2 smbfs username=kingnubian,password=xxxxxxx,user
//192.168.2.105/e-smith /mnt/silicon1 smbfs username=kingnubian,password=xxxxxxx,users,noauto
/dev/discs/disc0/part5 swap swap defaults 0 0
/dev/discs/disc0/part1 / xfs defaults 0 1
I would like users with an account on the Linux box to mount the remote share on the XP box without needing to SU and consequently need the root password. When trying now to mount "e-smith" (The share on the XP box) as a user using "mount /mnt/silicon1" I get a message about needing to be SU.

To allow users to mount smb shares you need to make smbmnt suid:
# chmod +s /usr/bin/smbmnt
Note however that the user needs to own the directory used as mountpoint. So I don't know how to make 'mount /mnt/silicon1' in your setup work for all users.
For the users to be able to unmount the smb shares as well you need:
# chmod +s /usr/bin/smbumount
Now users can do 'smbmount //server/share mountpoint -o username=whatever' or simply 'mount mountpoint' if the details are specified in fstab. To unmount root can do 'umount mountpoint' or users can do 'smbumount mountpoint'.
Don't confuse smbmount with smbmnt - the first is the command you use to mount shares manually, the second is the one that should be suid and is used both by smbmount and by mount -t smb.
Hope this helps.
-bogomipz

How to allow user to select pdf file on local machine and populate field with file name only

Folks,
I have a project requirement that I am stumped on. I am admittedly a novice, so forgive questions that may seem obvious.
My requirement is a form running on a client system where the user can click a button and select a PDF file name from a PDF on their local machine and then populate a form field with that file path & filename. The file names vary between all machines, so there is no static list. Note that the PDF is not embedded, nothing is executed, I simply need the file name.
There are several of these on a form (20+), so manual name entry is too error prone. I would like to use a 'browse' type dialog, but can not figure out how to implement it.
I've looked at app.browseForFile, but the users can not install a javascript file in their adobe folder or any other files; the functionality has to be integral with the original PDF.
Functionally, this is no different from the image object file browse, except that I need a PDF instead of an image file, so there doesn't seem like there should be a security issue that is any different from those surrounding the image object.
I've been stumped on this for the entire week, and I have a deadline rapidly approaching, so any examples or suggestions (please remember I'm a novice) would be greatly appreciated!

Thanks for the reply Paul - do you have any sample code of how to attach the PDF? Or how the user can select a PDF to open? I might be able to attach it, retrieve the file name, and then un-attach it.
Alternatively, do you know how to retrieve the file name from the imagePath object? It will let you select PDF files, but I can't find info on how to retrieve the file name. It should be the way you would retrieve the file name for an image.
As a novice in this, thanks for your help and patience!

How to allow user to change SAP Portal password by themselves

We would like to allow user to change SAP Portal password by themselves. However, I added role Manage_My_Password and Manage_My_Profile to a user account. After logoned with this user account and opened the option 'Personalize'. I only find the page allow me to customize the page layout. But I haven't find tab for changing profile and password.
Pls advise.
Thanks.
Edward

Hi Edwar,
You can hide the pages from portal personalization workset. copy the workset and select the page and click on property -> select Invisible in Navigation Areas ->yes
You can find the workset under
Portal content->End user content->Standard Portal Users>Workset->Portal Personalization
If you want a custom developed application fro change password see the below blog
A Change Password Application
Hope it helps
Regards
Santosh

How to allow user upload file on applet??

Sorry I'm new to programming here, but I'm trying to allow user to upload a file to the server so the program inside the server can user the file as input.
I've noticed that JFileChooser, the ideal class for this, is not allowed on the applet, so I don't know how to go about doing this.
Thanks for any input!

ok
you wish to transfer a file from applet to server.
1. Applet gets the file
the applet needs to access the file System therefor it must b a signed applet to get aound the security restrictions. This is why the JFileChooser doesn't work. Check out the tutorials on jars and applets, particularly the security notes.
2. opens a connection with the server
so the applet has a file and needs to send it. there needs to be a service of some form on the destination computer to execpt the file. Perhaps you write your own perhaps you use HTTP.
3. server software stores the file
where an applet is an mini application that runs within the confines of the web browser. a SERVLET is a service program which runs with in the confines of a server, such as a web server.
this is a lot easier to do HTML rather that applet in my opinion but which ever.

How to allow user to enter multiple values?

Hi, can someone tell me how I can allow user to select multiple values from a selection screen. To be more clear, I have to display 4 values on the selection screen and want to allow user to select 2 or 3 values from it. It will be very helpful if someone could tell me how to do it.
Thanks in advance,
pushpa

hi mahesh,
pls c the code below. this is what i have written in my program. when i run this program it is showing only one value and that too only the first one '1234'. i want that it display all the values that i gave in the initialization part.
please help.
thanks,
pushpa
SELECTION-SCREEN BEGIN OF BLOCK enter_data WITH FRAME TITLE text-001.
SELECT-OPTIONS skunnr FOR kna1-kunnr.
SELECTION-SCREEN END OF BLOCK enter_data.
INITIALIZATION.
skunnr-low = '1234'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.
skunnr-low = '9824'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.
skunnr-low = '8756'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.
skunnr-low = '6534'.
skunnr-sign = 'I'.
skunnr-option = 'EQ'.
APPEND skunnr.

On and iPad how to Allow User To Enter Custom Text (Dropdown only) Enables users to enter a value other than the ones in the list.

On an iPad, how do I :
Allow User To Enter Custom Text
(Dropdown only) Enables users to enter a value other than the ones in the list.'?

Are you using the built-in Currency option under the Format tab? If so,
what you're describing should not happen.

How to allow user to see salary button in assignment Window

Similar Messages

Maybe you are looking for