How to allow users to record new lines in an input ready query?

Dear All,
I am using BI integrated planning (NW2004s) and I would like to create an input ready query with account numbers in the rows. I drag 0ACCOUNT into the line field in the BEx Analyzer which has many individual values in the relevant filter.
I do not want to show all possible account values in the rows automatically (there are too many accounts) but I would like if the user write the desired account numbers by hand or select them from a list of possible values.
In summary, I would like to create a solution similar to a BPS Layout where the characteristic combinations are 'From Transaction Data'.
Is it possible to create an input ready qurey in such a way?
Thanks in Advance,
Dezso

Hi Dezso,
Yes,
If you want the query to work like a "from transaction data" layout. Goto the extended tab on the charicteristic 0account and change the setting under "Access type for result values" to "Posted values" Then only lines with posted values will appear.
M.

Similar Messages

Adding new rows in the input-ready query

Hello everybody!
Could you please advise what setting should be done in the ready for input query to make it possible to add rows in it.
I succeeded in creating input ready queries where it is possible to modify key figure value for the existing records, but I haven't succeeded yet in creating query with input-ready rows.
Thank you in advance,
Kind regrds,
Maria Kazakova

Hi Gregor!
Thank you.
Of course before posting a question, I've read this help topic attentively.
I created Aggregation level ZPPLAN with characteristics:
 Version
 Cal. Year/Quarter
 Currency
Key figure:
 ZSUM_BDG
Query ZPRQUERY3 is based on aggregation level ZPPLAN
Query settings:
Rows:
 Version
 Cal. Year/Quarter
 Currency
Key figure:
 ZSUM_BDG
in the key figure properties, tab Planning option "Data can be changed using user entries or planning functions" is selected.
Execution of the query returns the table with input-ready cell and empty new rows doesn't present.
so could you please advise what else settings should be done for query, to make input ready rows available in the query? so as to make it possible to enter new records in the input ready query?
Following settings are done for the Analysis Grid properties:
tab "General":
- Display sort icons
- Apply formatting
- Allow navigation
- autofit
- Display hierarchi icons
Tab "Clipping":
Full size for horisontal and vertical.
Sorry for so long quetion,
I would be grateful for an answer,
Kind regrds,
Maria Kazakova

Insert new rows in a input ready query

Hello,
I have to build an input ready query in which the users should insert new records.
In the "old" transaction BPS0 there was an option to do this but now I'm using RSPLAN for planning...
What is the best way (or maybe a good way) to build this input ready query?
Thanks a lot

Hi,
If these characteristics have no char relationship you can add new rows as follow:
All the characteristics you have in your aggregation level must have single values in your input ready query. So restrict by variables or put them in the layout (not as a free-characteristic). In the front-end tools you have a select option to "Insert new lines". If you have added this you can add new records to your query. If you hover over a input cell and press F4 the user will get an input help.
Hope this helps.
Regards,
Juriaan

How to allow user to enter new values in a segmnt which's having a ValueSet

Hi Gurus
I am having a DFF segment where user needs the following validation. I have to check whether the value entered by user is having status number as 5 in a custom table. I can do this by Table type Validation.
But the problem here is, they should also be able to enter new values which not in that table.
How i can achieve this. Appreciate your help on this.
Thanks.
Praveen

Value sets allow only for standar list for validation, not a combobox that is what may help You to achieve what You want. You either have a restricted list or an open field to type whatever matches the format restrictions.
For what You specify, I see no reason on having a table validation is the user can after all enter new values, perhaps it's to have the table values as references and avoid duplicates. Workarounds may be:
Add an "others" value to the table, and enable another segment to enter new values and add custom validation to avoid duplicates and insert the new values to the table for future use.
Have an independent value set and add a customization to avoid duplicates (more difficult considering typos) and insert new values.

How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?

Hi,
How to allow user chaning his password in OBIEE 11g weblogic custom LDAP?
I need to give user an option to do so, without the intervention of any Administrator. I also do not want to make user a Administrator else he will be able to login in weblogic and can do any damages unknowingly.....
Regards,
Rahul

Hi,
Replace the line in the instantconfig.xml
<WebMessage name=”kmsgChangePasswordLink”><!–<HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML>–></WebMessage>
with
<WebMessage name=”kmsgChangePasswordLink”><HTML><sawm:messageRef name=”kmsgUIChangePassword”/></HTML></WebMessage>

How to prevent users from creating new folders in share folder directory?

Hello guys
I'd like to know How to prevent users from creating new folders in share folder directory but still keep their power of creating new folders in their personal 'my folder'?
I tried changing the 'manage privilage ---- create folder' to deny certain user accounts, but by doing so, it also stops the user from creating new folders in their 'my folder', which is not good..
I also tried going into these share folders and tried different access types such as 'change/delete', 'read', 'traverse folder' etc, but none of it work ideally. The 'change/delete' access still allows them to create new folders, 'read' access prevents creating new folders but also take away their power of saving reports..
Any thoughts on how to take away their ability to ONLY create new folders in share folder areas without affecting their other privileges?
Please advise
Thank you

Easy, on the shared folders root folder only give them 'read' or 'traverse folder' but on the the folder inside the shared folders root folder give them 'change/delete'. That means they can change anything inside those folders but not create any folders at the shared folders root level.

How to allow user print their draft anwsers before sending it as final ?

How to allow user print their draft anwsers before sending it as final in a form central questionnaire ?

Hey MTdev,
Panel close? events cannot be triggered on a VI being viewed or controlled remotely. Some more information on that can be found in the help here:http://zone.ni.com/reference/en-XX/help/371361E-01/lvprop/vi_panel_closeq/. My suggestion would be to set the Title Bar on the front panel of your remote VI to not be visible so that their only option for closing the window is to click the logout button. Are you using Remote Front Panels(http://zone.ni.com/devzone/cda/tut/p/id/3277) to do this instrument control? Using remote front panels allows you to manage a lot of the multiple people accesssing at the same-time type issues so it may be something to look into if you are not already using this method.
Regards,
Kevin
Product Support Engineer
National Instruments

Anybody knows that how to Allowing user Customization at runtime for portle

Anybody knows that how to Allowing user Customization at runtime for portlet.
What i want is to let user Customization persist to the repository. (not session). bu tmy testing accodring the Jdev 11g guide shows not working for portlet..
Any body knows how to do this for portlet ? Web center 11g
thanks a lot.
Wayne

Hi Wayne,
You can only save runtime customizations to the repository for the users present in jazn-data.xml file (If you are using file based security).
You will have to do the following before you can start saving user customizations:
1. Create Webcenter Template project.
2. Apply ADF Security
3. Use page-definition files for jspx pages.
After this, whatever customizations you do, will be saved to persistence storage.
Better would be to try this on server. Since, before deploying, you run the pre-deployment tool, which will take the MDS Repository path as an input and store all persistence storage there.
If there is nothing in that location, you can be sure something is wrong and debug it.
Hope that was helpful.
Regards,
Kunal Chheda.

How to create an Input Ready Query in Bex Excel with no transact data

Hi
We created a query where we want the user to put in NEW LINES. This query has in general no data when user starts planning.
We have 2 front-ends for this, Bex Web and Excel. Both shows initial 'no data available
BexWeb': Implementing the command set_data_entry_mode we get all the relevant columns for the input
Excel: Command set_data_entry_mode or set_input_mode does not allow the users to insert new lines. Still error message pops up 'no data available'
Do you have a solution for that ?
Regards,
Thomas

Hi Gregor,
In the note 1149346 that you have mentioned, it says -
You must start the input-ready query in change mode.
BEx Analyzer: In the properties of the analysis grid, the switch
"Suppress new rows" must not be set. Furthermore,
the switch "Allow entry of plant values"
must be set in the local query properties.
I have not seen this setting Allow entry of plant values in a query - can you tell what is refers to?

How to write data in the Infocube using BI IP input ready functionality

Hi All,
Please help me in the following scenario...
Input given to me is-- ZCUBSDID cube with associated role ZSP_BW_SAI_BUDGETS-DID_ALL.
Query is ZR_V7_CO_PA_CH_PB_DID_BUDGET_2 based on agregation level ZALBSDID (& ZALBVDID) in infoarea ZDACOPA.
I have to write data in the cube by using Input-Ready functionality of BI IP. Can you please provide me step by step procedure for writing the data in the cube as i am very new in IP side.
Also if any further input required just let me know.
My Analysis-> I checked that cube is in Planning mode and in Query Designer>Property Pane-->Planning Pane, Query is in Change mode and also associated Keyfigures are in Input-Ready enabled.
Also i am able to access query in Analyzer.
This is very critical for me and need to provide solution asap. Please update asap. It really be great help.
Thanks & Regards
Rupali Singh

Hi,
To enter data in to planning cube through manual planning, you can do the following,
1. In a query that is used for manual planning, a cell is only input ready if each characteristic value of all the characteristics included in the aggregation level is unique. None of the aggregated values on the aggregation level are therefore input ready: Totals, subtotals and inner hierarchy nodes are not input ready.
2. To be able to change values for calculated key figures (like Average Price as a quotient of Amount and Quantity), these must be based on input-ready formulas, and at least one operand must be input ready. More information: Defining Inverse Formulas (Designtime) and Inverse Formulas (Runtime).
3. In order to change aggregated values (with respect to the aggregation level), these values must be disaggregated on all the data records that contribute to the aggregated value of the cell. More information: Disaggregation (Top-Down-Distribution).
4. If a query used for manual planning includes a navigation attribute that is restricted using a fixed or dynamic filter or a restricted key figure, the system treats the navigation attribute as a normal characteristic. The rule under point 1 applies here. The system only reacts as though the navigation attribute were not part of the query if the navigation attribute is not restricted.
5. In a query defined on a MultiProvider or a complex aggregation level that you want to use manual planning for, a cell is not input ready if the InfoProvider that is defined by this cell is:
a. Not a real-time InfoCube
b. A real-time InfoCube that has been switched to load mode
6. If an input-ready query is executed in change mode, but the requested data is locked by another user, the query starts in display mode.
For more details, you can refer to the following link,
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/43/0c033316cd2bc4e10000000a114cbd/frameset.htm
Hope this helps you to solve your issue.
Regards,
Balajee

How can I do this input help in the Input ready query

Dear all,
Do you konw this function?
The following steps is that:
1,I create the Input ready Query.
2,I can insert the new record.
3,I can use the input help for the characteristics.
4,When I double the space, I got the pop-up for input help.
5,I want to get the function is that:
for example:
char1 is the char2 attribute.
char2 - - - - - - - -- - char1
m- - - - - -- -- - - - -a
n-- - - - -- - - - - - a
u- - - - -- - - - - - - -a
v- - - - - - - - - - - -b
w- - - - - - - -- - - -b
x- - - - - - - - - - - - b
when I write the "a" for the char1 in the new record at input ready query, I only want to got "m","n","u" for char2 from the char2 input help.
How can do it?
Thank you so much.
Best regards,
Leon

Hello Leon,
As you have already set char1 as an attribute of char2, what you would need to do is create an attribute variable for char2 of type exit.
Using a variable exit, you can pass the value of char1 to char2. This would then automatically restrict the selection list to "m", "n", "u" as values for char2 when you enter "a" as the value for char1.
Hope this helps.
Sunil

How to calculate and save planning data in bex input-ready query using keyfigures for calculation from different infoproviders

Hi Dear All,
We have two real time infocubes and two aggregation levels based on these cubes in one multiprovider
first cube1 is like
char1| char2| keyfig_coefficient(single value for each combination of char1 and char2)
same aggregation level1
(we have input query to fill coefficients by one responsible user)
second cube2 is like
char1| char2| keyfig_quantity| keyfig_result
same aggregation level2
Input ready query should be like (for all other users of different org units)
char1|char2|keyfig_coeff| keyfig_quant(for input) | keyfig_result = keyfig_coeff*keyfig_quant(calculated value, should be saved to cube2)
And we don't have pregenerated lines in cube2, users have to add new lines themselves by wad.
Question is, what is the optimal (easiest) way to make calculation and save result data to cube2 where keyfigures for calculation should be used from different infoproviders. I need just a hint.
Appreciate any help.
Nadya.

I found decision, agregation levels sould be based on multiprovider, not included.

How to implement the input help at web for the input ready query?

Dear all,
As you konw when we create the input ready query for Planning, we can insert the new record for plan with Analyzer tool. We also can use input help(double clike the space) for input the master data.
I want to konw when I use Web Appliaction Designer to run the query at the web, How can I use the input help for planning data.
My customer request me must implement the input help function at web.
Thanks a lot
best regards,
Leon
Message was edited by: Leon Wang
Message was edited by: Leon Wang

Hello,
It seems Input Help is not possible with WEB.
Check out the link below -
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm">Input Help - with Web application designer</a>
Bex Analyzer - You access input help for a cell by double clicking on it or choosing the F4 button.
Web Appln Designer - Input help is not available
Hope it Helps
Chetan
@CP..

Error in entering a new characteristic value using input ready row in WAD

Hi Guys,
I have created input ready query with input ready row option to enter both characteristic and key figure values. I have created info object without master data tick in Master data/text tab to enter free text which inturn will create a new record in master data. It is working in Bex analyzer, here I can enter any value to create a new entry in the master data but where as in WAD I am getting error message reading invalid values. In WAD I am restricted to choose only available master data entries. Do I miss any settings in WAD. Your help will be highly appreciated.

Hi,
the feature you are requesting is called "Master Data Planning". Unfortunately it is not supported by SAP. Please use the term "master data planning " to search this forum and you will find some threads about this issue.
Hope this helps
Matthias Nutt
SAP Consulting Switzerland

How to get Input-Ready Cell Value of Input Ready Query?

Hi,
How to get input ready cell value in fox formula?
for example :
In Input-Ready Query,
C_Code Month Psale(input ready)
1000 05.2012 800
now i want Psale 800 in fox formua before value save in cube,
is it possible?
Thanks
Ravi

Hi,
as I understand your requirement: you want to execute a planning function before 'save'. This possible, cf. note 1356805
for more details.
Regards,
Gregor

How to allow users to record new lines in an input ready query?

Similar Messages

Maybe you are looking for