How to allow web access into RV120W

I had WRT54G2 and recently switched to an RV120W. I have an Internet accessible camera system connected to my router. Before, this worked fine... there is a dns service (DynDNS.com) that is configured as part of the camera setup. I would then just enter http://blahblah.com/index.htm and I would connect to the cameras. I install the new router (RV120W) and I can no longer connect to the cameras. I do not recall any configuring that I had to perform on the old router.
Anybody know why the RV120W isn't letting me get to the cameras?
Thanks in advance,
Darren

Hi Darren,
1. Did you access the web interface of the RV120W when you set it up and configure the dyndns settings under Networking->Routing->Dynamic DNS?
Can you ping your DynDNS address from the command prompt?
Also, have you logged into your dyndns account recently to verify that it is active? Not very long ago (probably a month or so), DynDNS started charging a fee for their services, whereas one could have a free account prior to the changes.
2. I know you said you don't remember configuring anything on the WRT54G2 for the camera's remote access, but often we have to set up some port forwarding rules under Firewall-> Port Forwarding in the web interface for remote access to cameras. If you need assistance with this, please feel free to call 1-866-606-1866 and we will be happy to assist. I would suggest contacting the camera manufacturer to see if there are ports that need to be open for your camera system prior to calling in- that will help us tremendously.
I hope this information helps! Have a great day!

Similar Messages

How to convert Web app into a channel?

To whom it may concern,
Does anyone know how to convert a Web app into a channel inside the Portal server 6.0?
I developed the web app and tried to create a provider and a channel for it, but the Portal server did not recognize the WEB-INF folder and give me errors saying that it couldn't locate the class files.
I also have a problem with URL inside my jsp page (channel).
For example, I have two jsp pages:
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test1.jsp
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
and when I try to put a link from test1.jsp to test2.jsp using
... and make a channel based on test1.jsp. The channel will display the link as "http://mydomain/portal/test2.jsp" and result in "Error: page not found". I want the link to point to
/etc/opt/SUNWps/desktop/default/MyCustomProvider/test2.jsp
To summarize my questions,
1) Where should the web app be located in the Portal server?
2) How to make a link inside one jsp page (channel) to point to another page inside the same folder?
Thank you in advance

Hello Karthik,
I just tried to solve my problem with your suggestions, unfortunately, my JSP channel still doesn't work :(
The portal server keeps reporting "Server Error..." when I tried to add query at the end of the href.
Do you still have any other suggestions?
Thank you

How to connect Webi Report into SAP Portal?

Dear Gurus,
i would like to connect Webi Report into SAP Portal.
Could you please give me the steps to follow to acheive that requirement or send me some documents?
Thanks

Please check the wiki below.
http://wiki.sdn.sap.com/wiki/display/BOBJ/IntegrationofBOEXI3.1intotheSAPEnterprisePortal+7.x

How to get webi data into dashboard for non-users of webi.

I need to find a way to get data from a WebIntelligence Report (essentially 3 numbers: Average This Year, Average Last Year and Target This Year (eg, 40, 63, 55)) into a dashboard, where the data is refreshed each day. The resulting dashboard will be published on my external web site where anyone can access it. It is essential that a connection to the webi server is not required, so I can publish the report data to a text file on a network drive and pick it up from there. The data will change daily so this must be reflected in the dashboard.
Webi has no capability of saving to XML, so it's excel, text, csv archive or PDF only.
I have been playing with the "From Text" option in the Data tab, but changes to the data do not show when the .swf file is run. When in dashboard mode, I can click on preview to show the dashboard and the data doesn't change, however when I exit preview, the data is updated in the spreadsheet of the dashboard. It is just never reflected when the dashboard is displayed. I have dicked the refresh ever 1 minute, refresh data when opening the file, overwrite existing cells options in the External Data Range Properties page for the From Text option and am looking at the data via both a Grid object and an Spreadsheet object.
Could anyone please suggest what I am doing wrong, or anything else I may be able to try instead.
Using BO4.1, sp1, p1.
Thanks
Rodney.

Hello Evans,
PLZ refer publishing webservice connection in webi
Creating BI Web Service in BO 4.0
Hope it will suits your requirement
Regards
Subbarao M

How to allow application access to particular User while running payroll

Guys,
We are using Oracle Co-Hrms and payroll application and running fine,but one majore problem we face in every payroll,while running the payroll if any employee profile opened by any user ,which is inculde in assignment set of running payroll then system take much time,Howevery,rightnow we inform to whole department to don't use hrms between x to y time,but it is not effectivey properly and also not propery way according to this big Application "Oracle E-Business Suit,i think,there must be an opetion to cover this problem,
Is there any possibilit to locke all of the user temporary excep one to two user,who work on Salary Process(payroll).
Please advice
thanks

Thanks for reploy,
The way you have defined is better to avoide this issue,could you please tell me one thing,is there any request in application to disconnect all the user forcely on the spot who are connected and allow again to login in application only thoes user who have System Administator Responsibility,
--thanks

How do import web site into Muse

I created site in Muse, uploaded to host and it is online. Now I need to edit the site and can't find my files. How do I download it from the host so I can edit it?

Hi,
Perhaps, if you had enabled the "In-Browser Editing " feature available in Muse then you can still Edit your site online even if you don't have the Muse file.
Please refer to this link :- http://helpx.adobe.com/muse/using/in-browser-editing-websites-third-party-hosting.html
Also, If you cant find the Muse file, then the only option left with you would be to work on the html files that are hosted on your server and make the changes using HTMl , CSS etc
Regards,
Rohit Nair

Outlook Web Access - Integration into portal

Hello All,
Could you please let me know if there is any specific iview to integrate OWA (Microsoft Outlook Web Access) into portal.
I did go thru the docs on configuring OWA into Portal -which specifies to use App Integrator iview and http system (with user mapping), but the result is i am redirected back to the logon page only.
Kindly help.
Regards,
venkat.

Hi Venkat,
Please go through the following PDF document..
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_g-i/integration%20of%20outlook%20web%20access%20into%20sap%20enterprise%20portal.pdf
Hope this will help you.
Regards
Kris

Application Itegrator - Outlook Web Access issue!

Dear all,
Currently, on a requirement to integrate Outlook Web Access into portal, I am required to create a system based on par file "webapps.par".
I've looked into SDN and Service Marketplace but unsuccesful to find the par file.
If any of them have been able to download it or are aware of the location to download, request you to provide it.
My mail id is "[email protected]".Appreciate any kind of help.
Thanks & Regards,
Sharath MG

Sharath,
Please refer to this blog.
Configuring Outlook Web Access iViews
Hope this helps.
Cheers,
Sandeep Tudumu

New CUMA 7.x can't web access ?

Hi friends ;
new CUMA installation for MCS7845-I2 server. Just follow the instruction installation step. Right after finish the installation some how not able web access to CUMA server. the web links is http://10.10.10.1:7080/adminportal . Suspect that w/s issue, but other w/s not able access too. Those w/s can access cucm, cup unity no issue. What could be wrong ? Pls advice.
rgds
tan

Check to see if Cisco Tomcat is running:
utils service list
Michael
http://htluo.blogspot.com

Web access how to stream to android and ipad`s

Hello.
At the moment I can log into my web access server from another pc and click on media files and be able to watch a film by streaming.
I am unable to do this on my android or ipad is there a step by step guide on how to get this to work?
I am new to owning a server 2012r2 so be gentle.
Thank you.

While PowerShell Web Access (PSWA) does require authorization rules to function, these rules do not specify what cmdlets can be used in a PSRemoting session. The PSWA authorization rules define what user, or group of users, can remotely connect to what computer,
or group of computers, through the PSWA gateway (the PSWA server).
What you need to research are session configurations and/or endpoints. These are separate from PSWA, but can be used in conjunction with PSWA (PSWA website > Optional connection settings > Configuration >
NameOfConfiguration), just as they can in a standard console-based PSRemoting session (Enter-PSSession -ComputerName
server01 -Configuration NameOfConfiguration -or- Invoke-Command -ComputerName
server01 -Configuration NameOfConfiguration).
Start your research with New-PSSessionConfigurationFile and then Register- and Unregister-PSSessionConfiguration. These have been great for our environment, allowing non-admin users access to run very specific cmdlets as an admin, without being an admin
on the computer.

How a J2EE web application access CR reports stored on the CR Server XI?

Hi,
I'll be working on some crystal report templates that will eventually be hosted/publish on the CR Server XI.
My questions are:
1. How my J2EE web application access those reports?
2. Do my web application uses some CR API for the connectivity and integration?
3. What will happen to the database connectivity of the report template? since the report are created locally.
4. Can the report template be edited/updated on the server?
5. How the CR XI login functionality be involve in the integration (web application ---> CR Server XI)?
6. Is the J2EE web application be deployed on similar web/application server where the CR Server XI resides?
7. What is the role of RAS, Universe, Business View Manager to this whole CR integration?
I hope you can provide some guidance on this journey to Crystal Report world
Regards,
Rulix Batistil
Genesis Networks Pte Ltd
www.gen-net.com.sg

1) Your application connects via the Java SDK using the appropriate JAR files.
2) It can. You can set the database information at runtime or use the already populated information from Enterprise.
3) Same as 2. Typically when you save the report to Enterprise you set up the database information there so that it runs against the database you want without prompting. You can change this via code to hit whatever equivalent database you want.
4) Yes. You would have to use RAS and the RCAPI to accomplish this via code. You can also make changes in the designer and overwrite the existing report template.
5) You will log in via code. The information on how to do so is in the SDK documentation, which I will link.
6) It can be deployed to the same machine as CR Server, though we recommend against that. Typically you will want to deploy it to a seperate web server and allow it to connect to the CR Server across the network.
7) RAS can be used to run reports, as well as the page server. The universe and business view manager are not directly used in code. If a report runs against a universe or business view then it will use them for data, but you wouldnt do anything with them directly.
[BOE Developer Library|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm]
You will find the Java SDK information under the BusinessObjects Enterprise SDK section.
Best Regards,
Jason

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where

I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections. I need to be able access files without going to acrobat.com. Help!!!@

Post the PDF files to a web site. The browse to them in Safari on the iPad. When you Open the files specify the Open to occur in Adobe Reader. Then you can have/Save them in your Documents folder on the iPad. An iPad has limited access to files otherwise.

How to input sound file into MS Access Database, not random folder?

Hi, I am trying to input a sound file into an MS Access 2000 database, I know it can be copied and pasted into there, but how can u input into the database with a user record, i also need the code to extract it as well as inputting it....at the moment it records the sound and stores it as test.wav on the local drive....
here is my code for my applet do far....
compile this file first....
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
import java.io.IOException;
import java.io.File;
import java.net.URL;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.TargetDataLine;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.AudioInputStream;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.AudioFileFormat;
public class VoicePasswordRecorder extends Thread {
 private TargetDataLine m_line;
 private AudioFileFormat.Type m_targetType;
 private AudioInputStream m_audioInputStream;
 private File m_outputFile;
 public VoicePasswordRecorder(TargetDataLine line,
 AudioFileFormat.Type targetType,
 File file)
 m_line = line;
 m_audioInputStream = new AudioInputStream(line);
 m_targetType = targetType;
 m_outputFile = file;
 /** Starts the recording.
 (i) The line is started,
 (ii) The thread is started,
 public void start()
 /* Starting the TargetDataLine. It tells the line that
 data needs to be read from it. If this method isn't
 called then it won't be able to read data from the line.
 m_line.start();
 /* Starting the thread. This call results in the
 method 'run()'being called. There, the
 data is actually read from the line.
 super.start();
 /** Stops the recording.
 Note that stopping the thread is not necessary. Once
 no more data can be read from the TargetDataLine, no more data
 can be read from the AudioInputStream. The method 'AudioSystem.write()'
 (called in 'run()' returns. Returning from 'AudioSystem.write()'
 is followed by returning from 'run()', and then the thread
 stops automatically.
 public void stopRecording()
 m_line.stop();
 m_line.close();
 /** Main working method.
 'AudioSystem.write()' is called.
 Internally, it works like this: AudioSystem.write()
 contains a loop that is trying to read from the passed
 AudioInputStream. Since there is a special AudioInputStream
 that gets data from a TargetDataLine, reading from the
 AudioInputStream leads to reading from the TargetDataLine. The
 data read this way is then written to the passed File. Before
 writing of audio data starts, a header is written according
 to the desired audio file type. Reading continues until no
 more data can be read from the AudioInputStream. In this case,
 it happens if no more data can be read from the TargetDataLine.
 This happens if the TargetDataLine is stopped. Then,
 the file is closed and 'AudioSystem.write()' returns.
 public void run()
 try
 AudioSystem.write(
 m_audioInputStream,
 m_targetType,
 m_outputFile);
 catch (IOException e)
 e.printStackTrace();
 public static void main(String[] args)
 if (args.length != 1 || args[0].equals("-h"))
 printUsageAndExit();
 /* There is only one command line argument.
 This is taken as the filename of the soundfile
 to store to.
 String strFilename = args[0];
 File outputFile = new File(strFilename);
 /* For simplicity, the audio data format used for recording
 is hardcoded here. The PCM 44.1 kHz, 16 bit signed,
 stereo was used.
 AudioFormat audioFormat = new AudioFormat(
 AudioFormat.Encoding.PCM_SIGNED,
 44100.0F, 16, 2, 4, 44100.0F, false);
 /* Here, the TargetDataLine is being received. The
 TargetDataLine is used later to read audio data from it.
 If requesting the line was successful, it will open it.
 DataLine.Info info = new DataLine.Info(TargetDataLine.class, audioFormat);
 TargetDataLine targetDataLine = null;
 try
 targetDataLine = (TargetDataLine) AudioSystem.getLine(info);
 targetDataLine.open(audioFormat);
 catch (LineUnavailableException e)
 out("unable to get a recording line");
 e.printStackTrace();
 System.exit(1);
 AudioFileFormat.Type targetType = AudioFileFormat.Type.WAVE;
 /* The creation of the VoicePasswordRecorder object.
 It contains the logic of starting and stopping the
 recording, reading audio data from the TargetDataLine
 and writing the data to a file.
 VoicePasswordRecorder recorder = new VoicePasswordRecorder(
 targetDataLine,
 targetType,
 outputFile);
 /* It is waiting for the user to press ENTER to
 start the recording.
 out("Press ENTER to start the recording.\n");
 try
 System.in.read();
 catch (IOException e)
 e.printStackTrace();
 /* Here, the recording is actually started.
 recorder.start();
 out("Recording...\n");
 /* It is waiting for the user to press ENTER,
 this time to signal that the recording should be stopped.
 out("Press ENTER to stop the recording.\n");
 try
 System.in.read();
 catch (IOException e)
 e.printStackTrace();
 /* Here, the recording is actually stopped.
 recorder.stopRecording();
 out("Recording stopped.\n");
 private static void printUsageAndExit()
 out("VoicePasswordRecorder: usage:");
 out("\tjava VoicePasswordRecorder -h");
 out("\tjava VoicePasswordRecorder <audiofile>");
 System.exit(0);
 private static void out(String strMessage)
 System.out.println(strMessage);
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
import javax.sound.sampled.*;
import javax.swing.*;
public class AppletTest extends JApplet
 implements ActionListener
 public AppletTest()
 comp = null;
 startrecording = null;
 stoprecording = null;
 recorder = null;
 public void init()
 Panel panel = new Panel(new FlowLayout(1));
 comp = new JTextArea(50, 50);
 comp.setPreferredSize(new Dimension(50, 50));
 comp.setEditable(false);
 JButton startrecording = new JButton("Start");
 JButton stoprecording = new JButton("Stop");
 comp.append("Please record your Voice Password...\n");
 GridBagLayout gridbag = new GridBagLayout();
 GridBagConstraints c = new GridBagConstraints();
 getContentPane().setLayout(gridbag);
 c.weightx = 1.0D;
 c.weighty = 1.0D;
 gridbag.setConstraints(comp, c);
 gridbag.setConstraints(panel, c);
 getContentPane().add(comp, c);
 getContentPane().add(panel, c);
 c.weightx = 0.0D;
 c.weighty = 0.0D;
 startrecording.setEnabled(true);
 stoprecording.setEnabled(true);
 startrecording.addActionListener(this);
 gridbag.setConstraints(startrecording, c);
 getContentPane().add(startrecording, c);
 stoprecording.addActionListener(this);
 gridbag.setConstraints(stoprecording, c);
 getContentPane().add(stoprecording, c);
 int width = 300;
 int height = 200;
 setSize(width, height);
 setVisible(true);
 boolean looping = false;
 public void actionPerformed(ActionEvent ae)
 if(ae.getActionCommand().equals("Start"))
 createRecorder();
 recorder.start();
 System.out.println("Start Button Clicked");
 } else
 if(ae.getActionCommand().equals("Stop"))
 recorder.stopRecording();
 System.out.println("Stop Button Clicked");
 private void createRecorder()
 String strFilename = "C:\test.wav";
 File outputFile = new File(strFilename);
 AudioFormat audioFormat = new AudioFormat(javax.sound.sampled.AudioFormat.Encoding.PCM_SIGNED, 44100F, 16, 2, 4, 44100F, false);
 javax.sound.sampled.DataLine.Info info = new javax.sound.sampled.DataLine.Info(javax.sound.sampled.TargetDataLine.class, audioFormat);
 TargetDataLine targetDataLine = null;
 try
 targetDataLine = (TargetDataLine)AudioSystem.getLine(info);
 targetDataLine.open(audioFormat);
 catch(LineUnavailableException e)
 comp.append("unable to get a recording line\n");
 e.printStackTrace();
 System.exit(1);
 javax.sound.sampled.AudioFileFormat.Type targetType = javax.sound.sampled.AudioFileFormat.Type.WAVE;
 recorder = new SimpleAudioRecorder(targetDataLine, targetType, outputFile);
 comp.append("Press ENTER to start the recording.\n");
 try
 System.in.read();
 catch(IOException e)
 e.printStackTrace();
 comp.append("Recording...\n");
 comp.append("Press ENTER to stop the recording.\n");
 try
 System.in.read();
 catch(IOException e)
 e.printStackTrace();
 comp.append("Recording stopped.\n");
 private JTextArea comp;
 private JButton startrecording;
 private JButton stoprecording;
 private SimpleAudioRecorder recorder;
}I intend to use this for verifying the username, password and a voice password over the web....as shown in the following code...
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta http-equiv="Content-Language" content="en-us">
<title>Home Page</title>
<meta name="GENERATOR" content="Microsoft FrontPage 5.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<meta name="Microsoft Theme" content="artsy 011, default">
<meta name="Microsoft Border" content="tl, default">
</head>
<body background="arttilea.jpg" bgcolor="#000000" text="#FFFFCC" link="#FF9900" vlink="#999900" alink="#669933">

 Please enter login
 details below:
<form>
<table border=0 cellpadding=3 cellspacing=3>
<tr>
 <td align=right width="74">
 Username
 </td>
 <td width="335">
 <input type=text
 name=username size="20">
 </td>
</tr>
<tr>
 <td align=right width="74">
 Password
 </td>
 <td width="335">
 
 <input
 type=password name=password size="20">
 </td>
</tr>
<tr>
 <td align=center width="74">
 Voice
 Password Check
 </td>
 <td width="335">
 
<APPLET CODE="AppletTest.class" ALIGN="MIDDLE" WIDTH=272 HEIGHT=38 NAME="AppletTest.class"></APPLET> 
 </td>
</tr>
<tr>
 <td colspan=2 align=center>
 <input type=submit value="Enter Website" name="Submit">
 </td>
</tr>
</table>
</form>
 This page was last updated on 25/03/04.
</body>
</html>I will be very grateful if somebody could help me out....as this is my first time at java programming ....also my first time for using this forum!
Thanks,
Regards,
Mayur Patel

Hi
I Learned how to read a file text and Parse as StringTokenizer. But still i don't know how to read the Individual tokens into to database.
But now i face a new Problem, i am not able to sort it out.
i am posting my code
import java.io.FileReader;
import java.io.FileWriter;
import java.io.BufferedReader;
import java.io.PrintWriter;
import java.io.IOException;
import java.io.*;
import java.util.*;
public class CSVExample {
 public static void main(String[] args) throws IOException {
 BufferedReader inputStream = null;
 PrintWriter outputStream = null;
 try {
 inputStream = new BufferedReader(new FileReader("file.csv"));
 String text;
 while((text=inputStream.readLine())!= null)
 StringTokenizer st = new StringTokenizer(text);
 if(st.hasMoreTokens())
 System.out.println(st.nextToken());
 } finally {
 if (inputStream != null) {
 inputStream.close();
}Here the Problem is The file.csv has got two fields ID, NAME The content of this file is as follows
T12,MR.RAJ KUMAR
T13,MR.EARNEST DIES
T14,MR.MATHEW HYDEN
Now when i StringTokenize this File The Output printed as follows
T12,MR.RAJ
T13,MR.EARNEST
T14,MR.MATHEW
That means when it finds the Space it is not printing the Remaining Text.
Please Help me in this and then Tell me how to INSER The Tokens into the Database Table
Thank you for your service
Cheers
Jofin

How do i make an official complaint about an app? They have stopped access to my account and are trying to extort money via paypal (skirting Apple) to allow me access again!! Who might i contact regarding this behavior? Does Apple have a code of ethics!

Hello community!
How do i make an official complaint about an app? They have stopped access to my account and are trying to extort money via paypal (skirting Apple) to allow me access again!! Who might i contact regarding this behavior? Does Apple have a code of ethics required for apps?
Ive used this app for a couple years now, invested a significant amount of money developing my account over that time (close to a couple of grand id say). The Apps support wont discuss the situation, just demand the cash to reopen my account. There is no anual fee or anything.... Its extrordinary behavior to now be faced with this loss of investment.
I dont wish to go into more detail in the public domain but your help in directing me to the apropriate contact/department would be greatly apreciated. I'm located in Australia.
Best regards,
Mike

All I can suggest is to contact iTunes. You should not have been able to create a new account with the same email address
Apple - Support - iTunes - Contact Us

How do I include 'Edge Web Fonts' into Edge Animate?

How do I include 'Edge Web Fonts' (not Google Web Fonts) into Edge Animate?

Have you tried to use google fonts? I have used them and they work for me.
When you add your font for example:
Copy paste:
<link href='http://fonts.googleapis.com/css?family=Finger+Paint' rel='stylesheet' type='text/css'>
and then for font family.
'Finger Paint', cursive;
then select addfont on the addfont screen

How to allow web access into RV120W

Similar Messages

Maybe you are looking for