How to allows decimal place for unit of measure of order confirmation

Hi Guys
we have some special cases here that need to confirm the order quantity as decimal place,is that possible made some customizing in code CO11N? or have some ways support it .....
ex. work order A   10 EA
- operation 1   : colse 10 EA
- operation 2   : close 4.5 EA
Regards/Eric

Hi,
You can set a UoM to allow decimals in transaction CUNI. But i fail to understand why you would want to set EA to have decimals.
If a material is to be managed in decimals then evaluate the usage of a different UoM which allows for decimals.
Regards,
Vivek

Similar Messages

3 decimal places for unit of measure KG

Hi,
I would like to create a production order. In the field total quant I would like to give the 3 decimal places of mesure KG.
Error: "Only 2 decimal places are permitted for unit of measure KG"
Where can I customize the system, so that 3 decimal places have been permited.
thanks
Desy

thanks
I've seen the place in Customizing where I will maintain it.
Now I only have display authorization for class SS
I will speak with our Basis for more authorization.
Thanks
Desy

Decimal places for unit of measure

Dear All ,
If i change the Decimal Places for rounding in Customizing for Unit of measure ( CUNI tcode) for KG as 6 from 3 whether it will calculate with the 6 decimal places like 0.004756 ( earlier with 3 decimal places it will calculate any multiplication with 0.004 now i want the same with 0.004756 Kg )
whether it will work ?
and where it will impact

Hi
No it will not work like that. And it depend on the transaction where you enter that. In case of Purchase order quntity field it will be always with 2 decimal places because field MENGE has 2 decimal places only. If your system is already live then it is not advisible to do such changes.
Regards
Antony

Changing number of decimal places for Unit of Measure

Hi All,
I have a requirement to convert a quantity in one unit of measure to another (custom) unit of measure.
The issue is that the custom unit of measure has 4 decimal places (customer requirement). I found function module MD_CONVERT_MATERIAL_UNIT which does the trick for regular, 3 decimal places, UoM's. It won't output 4 decimal places since the output data type is EKPO-MENGE, which has 3 decimal places.
Does anyone have experience with trying to convert material's UoMs into 4 or more decimal places?
Thanks!

round_f_to_15_decs round variable of type f to 15 decimals
Sometimes type F (float) is used to represent exact data (Amounts, Quantities):
if values are to big to be represented as Packed (> 31 decimals)
to significally improve performance of calculations, e.g. in statistical reports
G_DECIMAL_PLACES_GET
REPORT Z_ROUNDING .
DATA: float TYPE f,
 amount TYPE p DECIMALS 2,
 correctamount TYPE p DECIMALS 2,
 chars(5) TYPE c value '1.005'.
CLASS cl_abap_math DEFINITION LOAD.
correctamount = chars.
WRITE: / 'Exactly:', chars,
 / 'Correct Amount:', correctamount.
float = chars.
amount = float.
skip 2.
WRITE: / '==== Usual Processing:',
 / 'Float:', float,
 / 'Decimals 3:', float DECIMALS 3,
 / 'Decimals 2:', float DECIMALS 2,
 / 'Amount:', amount.
float = cl_abap_math=>round_f_to_15_decs( float ).
amount = float.
skip 2.
WRITE: / '==== Correct Processing:',
 / 'Float:', float,
 / 'Decimals 3:', float DECIMALS 3,
 / 'Decimals 2:', float DECIMALS 2,
 / 'Amount:', amount.

Routing - decimal places for unit of measure conversion quantity

Hello all,
in the change routing screen in SAP (CA02), when going to a operation detail screen, a unit of measure conversation value can be defined. A value for header and operation can be made.
Currently we cannot set any decimal values for operations, I get the error message: "decimal places are not permitted."
Where in customizing can I change that?
Thanks
Anne

Hello,
thanks for the answers.
The UoM is LB.
I've already checked CUNI, but I can not find LB..?
Also I've noticed other places in SAP, for example the base quantity of some operations in the routing have a numbers with 3 decimal places and the same UoM LB, so this looks like the UoM is setup fine, maybe there are just problems with this special screen?
Thanks
Anne

Upto 4 decimal point for unit of measure

hi,
We have requirement to maintain upto 4 decimal point in PO and sales order quantity for unit of measure M3. Example PO quanity 0.3902 m3, sales order quantity 2.3212 m3, SAP allow upto 3 decimal point, how to handle this 4 decimal point for unit of measure and any impact to do so ?
best rgds,

Dear Eric,
To change decimal places of Materials follow this:
IMG - SAP NetWeaver - General Settings - Check Units of Measurement
select Units of Measurement & select required Unit of Measure & set decimal places.
Hope this helps...
Give points if useful...
Thanks,
Jignesh Mehta

How to assign a value for Unit of measure (like PC, KG...) in ABAP program?

Hi,
 How to assign a value for Unit of measure (like PC, KG...) in ABAP program?
 I want to assign PC in a field to execute the program, like wa-ENTRY_UOM = 'pc'.
 But the system returen a message that "Unit of measure is not convertible to stockkeeping unit PC"
 Could anyone tell me how to assign the value??
 Thanks!

hi,
first convert the quantity in the same unit ( like in you case ST to PC ) by using FM : MD_CONVERT_MATERIAL_UNIT
CALL FUNCTION 'MD_CONVERT_MATERIAL_UNIT'
 EXPORTING
 i_matnr = matnr
 i_in_me = entry_uom
 i_out_me = out_uom
 i_menge = quantity
 IMPORTING
 E_MENGE = fp_l_v_quant
 EXCEPTIONS
 ERROR_IN_APPLICATION = 1
 ERROR = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 give error message here
 ENDIF.
bcoz in ur program somewhere the quantities etc are compared and there units may be different... so that is why it is showing such error. so just convert convert the quantity in the same unit .
regards
rahul
Edited by: RAHUL SHARMA on Jun 17, 2009 9:31 AM

Decimal places in unit of measure in Sales order

Hi,
In the Sales Order application in PCUI, when I create a create an order for customer XYZ, and add product ABC for qty 1 which uses unit of measure PC, the qty is displayed with 3 decimals as 1,000 whereas if I use the unit of measure EA the quantity is displayed without the 3 decimals as 1. I need the unit of measure PC to not have the decimal places like in SAPGUI.
Could anyone help me understand how this can be achieved?
Thank you for help in advance.
Regards,
Priya

To elaborate better.
Again, use Tcode CUNI - Unit of measurement : Initial Screen.
At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
And click on UNIT OF MEASUREMENT button.
In that you will find MON - Month.
There go for details by selecting MON or select MON and press F5 from Key board.
For MON unit maintain following parameter as per your requirement:
-Number of decimal places for number display
Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
-Base ten exponent for floating-point display
Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
And deselect commercial meas. unit in application parameters section.
I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
Thanks & Regards
JP

DECIMAL PLACE UN UNIT OF MEASURE

Dear Friends
is ther any way to maintain decimal place during alternate unit of measure. FOr Ex 1 bar = 23.34 Kg. without rounding 100 bar = 2334 kg. i already maintained decimal in CUNI. still not able to maintain decimal.
Thanks and Regards
Madhavan

Yes you should be able to maintain this. Ensure that you allow decimals for the UOM Kg in CUNI it should allow this conversion you are referring to. You should put decimal places for both display and conversion.
Edited by: Hemalatha Raghavendran on Jul 20, 2009 4:33 PM

Decimal Points for Unit of Measurement

Hi all
For doing service entry in the QTY field can we put the value upto six decimal for any unit.
in customisation for Unit of measurement can we configure this thing putting decimal places - six or is there any other setting is required
Please help
Thanks in advance
Rajesh

Hi,
Yes in customisation for Unit of measurement you can customize it,
but it will be valid whenver you use this UOM in the system.
There is one thing also you can do
The Quantity fields decimal points in service entry is by default 3 digits ,
so to use 1,123456 quantity for lets say price 10 $
you can multiply both sides with 1000
i mean
use 1123,456 for 10000 $
just an idea
Regards
Hope it helps

Decimal Places in Unit of Measure

Hi,
I want to post a service entry sheet for an activity with 5 decimal values.Five decimal values is required in order to arrive at exact value of service rendered.
I tried changing the decimal values for the particular UOM in CUNI. Still iam not able to do service entry sheet.
I require your solutions.
Thanks,
Karthik.

Hi,
Need to take help from ABAP consultant.
Change the decimals from 3- 5 also need access key for same.
Regards
Gietesh

Difference between Decimal places for Quatities and Units

Can anyone please explain the difference between the followings -
1. Number of Decimal places for Quantities, and
2. Number of Decimal places for Units
In SAP B1 2007B General Settings.

Hi,
The Decimal places in the general setting indicates
Amounts:Display of row and document details
Prices:Display for price fields in documents,item data,price lists
Rates:Display of decimals in currency calculation
Quantity:Display of quantity in documents and item data
Percent:Display used in calculation of tax amounts and discounts
Units:Display used in units(UoM) of items.
Also refer these note:[737880|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=0000737880]
Hope this is helpful

Getting an error in CIF Inbound queue:"Only 0 decimal places are permitted for unit of measure PC"

Hi,
I am getting an error in CIF Inbound queue (function: CIF_ORDER_INBOUND_30A). The error text says "Only 0 decimal places are permitted for unit of measure PC".
Can anyone point out the solution to resolve this error? It would be a big help for me as I am new to APO and so getting difficult to find a clue for it.
Thanks.
Regards
Mansi

Hi Mansi,
Please check the cif queue you will get the order number from that order number you can find out material code. Then check the material master unit of measure in MM03 you have used some alternative unit of measure and system is unable to convert order to alternative unit of measure because of decimal setting. If you go to CUNI and check the unit if measure PC it is not permitted for decimal places. If you need decimal than change the UoMof Material and use diff UoM or allow the decimal for PC which is not good practice.
Regards,
R.Brahmankar

More DECIMAL places for MM price-Not Global

I have read the many postings on decimals. However, I have not seen the exact scenario I'm inquiring about.
I want to increase the decimal places from 2 to 4 for the cost of materials we purchase (i.e. supplier price), but I do NOT want to set this as a global aspect for the company when dealing with numbers/currency.
It's not just a simple matter of setting a different unit of measure, because let's say we order a reel of capacitors - the reel may come in qty of 1,000 or 2,500 (only one example). So, we really need to set price by (ea). The problem is that many of our parts price at .0014 (example) and in SAP that shows a cost or price [depending on where you're looking] of zero. Plus, the Purchasing agent sends a PO with incorrect price information.
It would be very helpful if anyone could tell me how to increase the number of decimal places for specific fields as opposed to globally.
Thanks you!!

The right tool to do that is the pice unit. This is in the system for ecatly that purpose, to provide more precision in prices. It has nothing to do with unitz of measure that is used for logistical purposes.
If you have a price 0f 0.0014 each you can set a price unit of 1000 and will have a price of 1.40 for 1000. You still can have only 500 or even 1 on stock. the calculation done if you receive your 2500 will be 2500 * 1,40 / 1000 which is of course the same as 2500 * 0,0014
best regards, Udo

Decimal places for JPY currency in change documents

Hi Gurus,
For opportunities in SAP GUI the change documents for JPY show incorrect numbers.
The number is divided by 100 (two decimal places added).
Checked the CDPOS table and found the values already divided (two decimal places added).
SPRO->General Settings->Currencies->Set decimal places for currencies is set for 0 decimals for JPY.
Is there any way I can get correct values in the change documents?
Please advice. Any hint is useful.
Thx,
Martin Kuma

Hi Naren,
Thank you for the tip, however the TCURX table is changed via customizing and should be changed only during the system initialization.
What I would like to do, is to assure that the system displays the values in change documents correctly. It should apply the currency conversion for the data displayed the same way it does for all the tables.
Do you have any idea, how should I do this?
Regards,
Martin Kuma

How to allows decimal place for unit of measure of order confirmation

Similar Messages

Maybe you are looking for