How to analy report in rsrt
Hi, experts,
I try to use Tcode: Rsrt to analysis the difference if report use aggregates or not.
under the "Execute + Debug" button, I select the option "Display Statistics Data". but in output text interface, I can not found any information for query performance ( for example: run time, how much rows readed, how many transfer to OLAP processor, etc )
thanks in advance.
hi,
hope SAP Note Number: 130696 -Performance trace in BW-
helps
Symptom
How can you monitor the performance of a query in BW?
Other terms
Performance, tracing, BW, query, report, time
Solution
1) Activate the saving of statistical data for each InfoCube
-> BW Admin Workbench - Tools -> BW Statistics for Infoproviders ->
Select the "OLAP" field for the InfoCube.
3) Execute report/query
2) Analyze the RSDDSTAT table using Transaction SE16
Access, for example, using the InfoCube name or the user name or the
timestamp
1. Times that are saved:
QTIMEOLAPINIT
Time of the initialization of the query (for example, loading query in OLAP, compiling if required)
QTIMEOLAP
Time that the OLAP processor required
QTIMEDB
Time the database + network required to select the transaction data. The time is measured from when the SQL command is send to the database, and it is stopped when the requested data reaches the application server. This time therefore includes the transport on the network and the selection on the database.
QTIMEVARDP
Time the user required to enter the variables
QTIMEUSER
Time the user required between the navigation steps
QTIMECLIENT
Time of data formatting in the frontend
The time measurment starts when the OLAP processor has completed the data formatting. The data is then sent to the frontend (EXCEL). The time is stopped when the frontend (BW add-in in EXCEL) has inserted all data in the worksheets (writing the contents and formatting cell, if required). The time therefore includes the transport on the network with the RFC connection and the output in the frontend.
TIMECHAVLREAD
Time required to read master data
TIMEAUTHCHECK
Runtime of the authorization check.
TIMEREST
Time that could not be assigned in more detail (should be equal to 0; if this is not the case, something in the internal processing of the OLAP processor occured differently than expected.)
QRUNTIMECATEGORY
Time of a navigation step (QTIMEOLAPINIT + QTIMEOLAP + QTIMEDB + QTIMEEXCEL + QTIMECHAVLREAD) rounded to the next higher scaling (1,10,100,1000 ... seconds). As of 1.2B, this is rounded to 1,2,3, ... 10,20,30,...100,200,300,... seconds.
1. Data regarding the size of the query:
QDBSEL
Number of the records that had to be read on the database
QDBTRANS
Number of records that the database transferred to the server
QNUMCELLS
Number of cells that were transferred to the frontend
QNUMRANGES
Number of formattings that were transferred to the frontend
RECCHAVLREAD
Number of master data records to be read
1. In addition, the following is saved:
QAGGRUSED
Name of the aggregate used
QNACHLESEN
Indicator: Query reads during each navigation step
1. Administrative information
STATUID
Key of the table; link in view RSDDSTAT_V
QSESSION
All data for a call of the frontend (between start and end of the frontend) is compounded with this unique GUID.
QNAVSTEP
The navigation steps of a QSESSION are numbered in ascending order
QNUMOLAPREADS
Number of read operations OLAP processor for each navigation step
HANDLE
In the frontend, each embedded query has a separate, sequential number (handle)
If you want to analyze a certain query, start it and filter the values from the table afterwards: Selection options: infocube, user name, queryid (can be determined in the report monitor (Transaction RSRT)-> Technical information). The STARTTIME (UTC time) tells you whether you have found the correct session.
You can recognize a session because the QSESSION is always assigned the same ID. The sequence of the navigation steps is saved in QNAVSTEP. However, you can also determine it using the STARTTIME.
Similar Messages
-
How to access report placeholder in format trigger
How can i access the report placeholder inside the format trigger. I am trying to access it like :F_AMOUNT as i am seeing it in the object navigator but it is giving me error that it is bad bind variable.
Hi
If I got your question properly, You need authorization for the accessing Client System. You can see the Reports at RSRT , RRMX may also lead to Query Analyser.
Hope it helps -
How to access report designer in customer system
How to access report designer in customer system as we dont have direct acces to Customer BI System. Is there sny transaction code for report designer/web application designer or we can go through RRMX.
Thanks in Advance.Hi
If I got your question properly, You need authorization for the accessing Client System. You can see the Reports at RSRT , RRMX may also lead to Query Analyser.
Hope it helps -
How 2 creat report for displaying the details of a Delivery Document using
how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewardedHI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
end of t_likp.
types: begin of t_lips,
vbeln type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
end of t_lips.
types: begin of t_vbpa,
vbeln type vbpa-vbeln, "SD DocumenT Number
posnr type vbpa-posnr, "Item number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_vbpa.
types: begin of t_kna1,
kunnr type kna1-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr type kna1-adrnr, "Address
end of t_kna1.
types: begin of t_li_vbpa,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_li_vbpa.
types: begin of t_final,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr1 type kna1-adrnr, "Address
name2 type kna1-name1, "Name 1
ort02 type kna1-ort01, "City
adrnr2 type kna1-adrnr, "Address
name3 type kna1-name1, "Name 1
ort03 type kna1-ort01, "City
adrnr3 type kna1-adrnr, "Address
end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
codepage = 11
others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
form = 'Z9BT_DELIVERY'
language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
form = 1
format = 2
unended = 3
unopened = 4
unused = 5
spool_error = 6
codepage = 7
others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
element = 'ITEM_LIST'
function = 'SET'
type = 'BODY'
window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
unopened = 1
bad_pageformat_for_print = 2
spool_error = 3
codepage = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
a~erdat
a~kunnr
a~kunag
a~traty
b~vbeln
b~posnr
b~matnr
b~arktx
b~lfimg
b~netpr
b~vgbel
c~vbeln
c~parvw
c~kunnr
into table it_li_vbpa
from likp as a
left outer join lips as b on a~vbeln = b~vbeln
inner join vbpa as c on b~vgbel = c~vbeln
where a~vbeln in s_vbeln and
c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
name1
ort01
adrnr into table it_kna1 from kna1
for all entries in it_li_vbpa_temp
where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform. -
How to save report in PersonalCategory after creating it using java panel?
Hi,
Anybody knows How to save report in PersonalCategory after creating it using java panel?
I dont want to save it in public folder. I want to save report (webi) in user's personal category.
can anybody send me source code?
It will help me a lot.
Thanks in advance
Amol MaliHi teda,
i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
Actually the report is created in webi java panel using RE SDK and is saved in Report Sample Folder then i'm saving it in user's personal category by following code
string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
+ "SI_INSTANCE=0 And SI_ID=" + reportID;
InfoObjects infoObjects = infoStore.Query(query);
InfoObject infoObject = infoObjects[1];
Webi wreport = (Webi)infoObject;
ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
/personalIDs.Add(Convert.ToInt32(categoryID));
infoStore.Commit(infoObjects);
But the report is presents in the Folder also and in user's personal category also.
I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
How can i do that?
any idea.
Please help me.
Thanks in advance
Amol Mali
Edited by: amol mali on Jan 9, 2009 7:55 PM -
How to get report in excel format instead of pdf from oracle forms.
Hi,
How to get report in excel format instead of pdf from oracle forms.
Form & Report developer 10g
report format .rdfcreate a report using report builder.
call the report from form using the following procedure
DECLARE
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('RP2RRO');
Add_Parameter(pl_id,'P_SUPCODE',TEXT_PARAMETER,:CONTROL.S_CODE);
Add_Parameter(pl_id,'P_INVOICE_NO',TEXT_PARAMETER,:CONTROL.IN_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'INVOICE_REG_DETAILS.rep');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'SPREADSHEET');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_dbserver_frhome1');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_dbserver_frhome1') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_dbserver_frhome1';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END; -
How can I report people that are harassing me on my question?
I posted a question on how to fix a problem that I had with my iPhone. When a person posted me talked about dealing with an employer to solve the problem. No it don't matter how I read it I asked why did they assume that without asking me if I even had a job that the phone was used for. After that the harassment started as if they were defending their friend and I was cruel to them. I did get an answer to my problem but the harassment keep going on and on and on even one wrote that because of that one question I shouldn't be able to post anymore questions when I would need it.
How can I report this to someone? Who else have these people harassed? Would these people be addressed that they shouldn't be behaving like this?Sorry, but the poster before Bee, and Bee herself did not write anything that could be construed as harassment. If those posts deeply hurt you (as well as the original post that set you off) then I would strongly suggest that the Internet is NOT a place you should spend any time as your feelings are going to constantly get hurt. In fact, I'd suggest avoiding all contact with other people as much as possible if KiltedTim hurt you with his post.
As has been repeatedly explained, he merely asked because that is another avenue that could cause the Camera app to be removed, and he went on to explain how this happens. There is nothing personal in it, we don't care how you got your phone, where you work, what type of job you have, etc. He did care enough to join in and give another possibility as to why your camera icon was missing. If you do a search of these threads you will find that more than a few people have decided to put their work account on their personal iPhone and the profile installed on their iPhone by personnel at their workplace changes features on the iPhone.
Again, if this, and the answers here, deeply hurt you, pull the cable from the Internet immediately. -
How do I report a user or violation of the Agreement?
User hakinianzfromhakinianz is posting multiple spam threads and I want to know how I can report this user/their posts.
Do I have to be a certain level to have this privelege?
Here is the profile: https://discussions.apple.com/people/hakinianzfromhakinianz?view=overviewd6d24r94 wrote:
User hakinianzfromhakinianz is posting multiple spam threads and I want to know how I can report this user/their posts.
Do I have to be a certain level to have this privelege?
Here is the profile: https://discussions.apple.com/people/hakinianzfromhakinianz?view=overview
Is reported to host.
You may also report by yourself. Right hand up "report abuse" near "email notification" -
I am a new one in oracle and want to know how to hide report engin at runtime....
Can anybody help me.....
Thank you
FarhanThe following coding will help you to hide oracle report engin,
ADD_PARAMETER(idparam,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES'); -
Dear sir
On my XP I TRY TO RUN REPORT WITH REPORT SERVER I GET ERROR
ERR:41213 , CAN YOU HELP ME , HOW TO INSTALL REPORT SERVER IN ORACLE 9I REPORT WITH XPHello,
Test to start the Reports server from a "DOS Window" :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards -
How to uninstall Report server
Hi 2 all DBA
plz inform me how to uninstall report server components from application server 10g , or inform me which components is required for report server in application server 10g
ThanksHello,
Test to start the Reports server from a "DOS Window" :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards -
How do I report a fault if my phone is not working...
How do I report a fault if my land line phone is not working? The BT website seems to assume that at the very least the broadband line is working but this is often not the case. Please could you make it crystal clear what phone number to call to report a fault? (e.g. if calling from a friend's phone or a mobile).
Cal 0800 800 151 from another phone, or From a mobile: 0330 123 4151
But first do these tests here http://bt.custhelp.com/app/answers/detail/a_id/9812/c/345,353
You can report the fault online at https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=2&s_cid=con_FURL_faults
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
HT1391 how do you report an ipod touch stolen with serial number.
I have the serial number of my ipod touch. How do I report it stolen to apple?
You don't. Report it to the police, and your insurer if it would be covered.
tt2 -
How to print report in jsp page?
excuse me,i am new to jsp
may i know how to pritn report in jsp page or html?
tqhere is a hacked up example.. i ripped out a lot, so it may not compile, but you get the idea... the full version is really long and not much new info.. just all awt/display stuff...
package rowe;
import javax.swing.*;
import java.util.*;
import java.awt.*;
import java.awt.image.*;
import java.awt.event.*;
import java.sql.*;
import utility.*;
import java.awt.print.*;
public class rowePrint extends JFrame implements ActionListener, Printable{
String printType = "";
static JButton j = new JButton("Print");
FontMetrics fm;
String jID, promotion, product, jComments;
public void getInfo(int jid) {
ResultSet rs;
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection conn = DriverManager.getConnection("jdbc:odbc:rowe");
Statement stmt = conn.createStatement();
rs = stmt.executeQuery("select j.id as jID, j.comments, p.title as pTitle, p.product, p.packagingCartonCost, p.foldingQuarterCostPerM, p.foldingQuarterCostPerM, j.customizationOption as setupFee, p.perMcost, p.qtyCarton, d.name as dName, d.contact as dContact, d.email as dEmail, d.address as dAddress, d.city as dCity, d.state as dState, d.zip as dZip, d.phone as dPhone, d.fax as dFax, r.name as rName, j.totalQty, j.orderIn, j.estFreight, j.miscCost, j.coverSelection, j.imprintSelection from jobs j, promotions p, dealers d, reps r where j.promotion = p.id and j.dealer = d.id and j.rep = r.id and j.id = " + jid);
rs.next();
jID = rs.getString("jID");
jComments = rs.getString("comments");
promotion = rs.getString("pTitle");
product = rs.getString("product");
} catch (Exception e) {
System.out.println("getinfo: " + e);
public void actionPerformed(ActionEvent e) {
if (e.getSource() instanceof JButton) {
wookie();
public void wookie() {
PrinterJob printJob = PrinterJob.getPrinterJob();
Paper paper = new Paper();
PageFormat page = new PageFormat();
paper.setImageableArea(0, 0, 600, 780);
page.setPaper(paper);
printJob.setPrintable(this, page);
try{
//printJob.pageDialog(page);
// if (printJob.printDialog()) {
printJob.print();
} catch (Exception e) {
System.out.println("wookie1" + e);
public static void main(String[] args) {
rowePrint at = new rowePrint("Invoice");
at.getInfo((new Integer(args[0])).intValue());
at.drawShapes();
// at.wookie();
public void drawShapes() {
setBounds(0, 0, 670, 550);
addWindowListener(new WindowAdapter() {public void windowClosing(WindowEvent e) {System.exit(0);}});
j.setBounds(10, 10, 10, 10);
j.addActionListener(this);
getContentPane().setLayout(null);
getContentPane().add(l);
getContentPane().add(j);
show();
public rowePrint(String s){
printType = s;
public void paint(Graphics g) {
g.setFont(new Font("Serif", Font.BOLD, 18));
g.drawString(promotion, 20, 30);
g.setFont(new Font("SansSerif", Font.PLAIN, 4));
g.drawString("" + new java.util.Date(), 20, 37);
g.setFont(new Font("Serif", Font.BOLD, 21));
g.drawString("Rowe Furniture", 440, 35);
g.fillRect(440, 40, 145, 25);
g.setColor(Color.white);
fm = g.getFontMetrics(new Font("Serif", Font.BOLD, 21));
g.drawString(printType, 512 - (fm.stringWidth(printType) / 2), 60);
public int print(Graphics g, PageFormat pf, int pi) throws PrinterException {
if (pi >= 1) {
return Printable.NO_SUCH_PAGE;
paint(g);
return Printable.PAGE_EXISTS;
} -
How to create report writer in sap?
Hi Anybody,
I want to create new report writer for finance report for ex: (p & L or balance sheet), i don't know how to create report writer in sap.
anybody please tell me with example?
Thanks
Regards,
S.Muthu.
IT Dept.https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=createreportwriter&adv=false&sortby=cm_rnd_rankvalue
Maybe you are looking for
-
Built-in Isight for External Monitor with Macbook closed
Hello Apple Community, I'm having trouble using my built-in iSight through my external monitor. My set-up is that the Macbook is closed and I run everything through an external monitor. I'm unable, however, to use that external monitor's iSight with
-
Problem in Inserting the Value in the column through Stored Procedure
stored procedure is created and i need to insert data into the SALES_TRADEIN, from the parent table (Flatfile_sales),through COMMAND PROMPT. I have 2 details TradeIn_1 and TradeIn_2. I need to insert details of TradeIn_1 in SALES_TRADEIN TABLE if the
-
C# using ExecuteThisJavascript and appRightsValidate
Hello, I am trying to do the following and i keep getting the error "The server threw an exception. (Exception from HRESULT: 0x80010105 (RPC_E_SERVERFAULT))" on the actual ExecuteThisJavascript line. Maybe ExecuteThisJavascript doesnt have access
-
This is the test page: http://tmptw.servers121.com/~fivemr00/html/fmr-concept.html It looks ok in IE7 but not in FireFox or Netscape (don't know what safari shows?). You can see how the main body content shortens when its a short text page. This then
-
Safari (Flash Plugin) unstable behavior on Snow Leopard
I've been trying to debug this problem on Safari. Every time I upload a photo, the browser crashes. Any type of flash apps I use, whether it's uploading photos or another type, the problem is there. Does anyone experience this? I have checked this on