How to analyze the standard driver prog for form F150_DUNN_01

Hi,
     I'm working on a standard form F150_DUNN_01. It's standard driver prog is SAP150V.
I've modified the form, like i added some additional windows. Now i want to know where these
changes are reflected in the standard driver program.
Thanks & Regards,
R.Narsingh

The form has to be configured.

Similar Messages

  • How to Modify the standard layout set for Sales Order

    Hi all,
    Do we have any sap defined standard to modify the sales order,if no How to Modify the standard layout set for Sales Order,an also plz send me the step by step procedure for the same.
    Thanks in advance
    Santosh R

    Hi, Dear Ferry Lianto,
    Thank you very much.
    Commonly I know the total pricing procedures.
    But, would you please tell me how to control the CURRENCY for the subitem of a condition type as follows?
    For example, I can see the following kind of
    contents in the Tab:condition of a sales order:
    PR00     Price     130.00000      TEST     100
         Gross Value     20.12      USD     100 <-how to
         Discount Amount     0.00      USD     100
         Rebate Basis     20.12      USD     100
         Net Value for Item     20.12      USD     100
         Net Value 2     20.12      USD     100
         Net Value 3     20.12      USD     100
    VPRS     Cost     27.22      HKD
         Profit Margin     16.61      USD
    The currency of PR00:price can be controlled via tcode VK12; but how to control the currency of its subitem such as gross value, discount amountm, net value for item, net value 2, & net calue 3...
    Thanks and regards.

  • RE: what is the standard driver program for printing PO form in ECC 6.0EHP5

    Hi Guys,
                 For printing Purchase order smartform in MM module , earlier i used SMBA0 package i.e /SMBA0/AA_FM06P Driver program in Ecc 6.0 Ehp4 . But now my client is using Ehp5 ,here we could n't find SMBA0 package . So, can any one suggest me what is the relavant package for SMBA0 in Ecc  6.0 EHP5.
    Thanks in advance.
    Regards,
    Bala.

    Hi Bala,
    Those are available in client 000, you have to copy these Smartforms and driver programs from client 000.
    Client 000
    Original program: /SMBA0/AA_FM06P
    Original Form:      /SMBA0/IN_MMPO
    Regards,
    Surya

  • Standard Driver Program for Sales Order Confirmation

    Hi,
    My requirement is to develop smartforms and driver program for Sales Order Confirmation.
    For doing this, I found there is a standard smartforms R2RBL_SDORC_L for Sales Order Confirmation. So I thought I can take a Z copy of this smartform and modify it to my requirement. So that we can use the Import parameters (Form Interface parameters) of the form R2RBL_SDORC_L. This will also reduce the work of writing the code in Driver program.
    Now, I need to know what is the standard driver program for this form R2RBL_SDORC_L. If I can find the program name, I can take a Z copy of that and enhance it to my requirement.
    Ultimately I believe I can reduce the work of writing code to fetch all Sales order details.
    Can anyone let me know the standard driver program name for the form R2RBL_SDORC_L?

    Can anyone share how you approached in developing smartforms and driver program for Sales order confirmation?
    Note: This program and smartforms will be assigned in the NACE transaction.

  • How to identify the system generated program for any standrd extraction?

    Hi all,
    How to identify the standard program generated for any extraction takes place. Is there any tcode to figure out the standard abap prgms for the datasource.
    for instance:
    for the data source : 2LIS_02_SCL what is the standard extractor program used.
    Thanks
    Pooja

    Hi hemanyt,
    i cant find the table RSTRAN active.
    Thanks
    Pooja

  • How to find the standard smartform,sap scripts and theur driver programs

    Hi friends,
    can any one tell me how to find the standard smartforms and their driver programs and same for scripts also.
    bye
    sasi

    Hi sasidhar,
    1. Either standard or Y sapscript layouts,
       we can check their standard programs
       in this manner also.
    2. goto se71
       open the layout in DISPLAY mode.
    3.  FORM------> CHECK -
    > TEXTS
    4.  a small window will come.
        click ok (tick button)
    5. Again a new window will come
      which will list out all the DRIVER programs,
      which use this layout.
    regards,
    amit m.

  • How to download the LAN driver for Satellite A100 PSAA8E

    Can anyone help how to download the LAN driver for my machine. I found three LAN drivers but unable to download them from the toshiba europe website.
    Thank you

    > Whats the problem???
    > I found on the Toshiba European site different driver
    > version for different OSs.
    > You have to download the compatible one. If you use
    > XP choose the newest version for XP OS and if you use
    > XP MCE or Vista choose another one.
    >
    > Thats all.
    I am unable to find a compatible LAN driver for an XP OS. Can you tell me where exactly to look for this

  • How to find the standard Idoc for Transfer Order (LT03)

    hi
    How to find the standard Idoc for Transfer Order (LT03)
    How to create the Idoc on LT03
    plz help me out
    Thank u
    Ram

    Someone is using FM: L_IDOC_INPUT_WMTORD, message type WMTORD and basic type WMTOID01 in doing this when trying to send an Idoc to an external system when a transfer order for a delivery note is created (LT03). Is it OK
    Please reward points

  • How to Reset the Sata Link Controller for Full Sata 3 speeds on an OCZ Agility 3

    So I purchased a new OCZ Agility 3 drive, installed it into the main bay of my 2012 Macbook Pro, and the drive was running at half speed. I called OCZ and spoke to the guys about how to resolve this issue, they were very knowledgeable, but they had no ideas how to make thier Linux Live Tool work on the Mac, which gives us the ability to reset the controller. Here's what I did to get the full speeds out of my OCZ Agility 3.
    - You will need a Windows computer, or the ability to create and install Windows on a Bootcamp partition on your Mac.
    - Thumb Drive
    - Lots of Patience
    1. Open Disk Utility and create one partition on your thumb drive under MS-DOS Fat 32. Click the Options tab and select “Master Boot Record.”
    2. Go to the OCZ forum and download the older Linux Live Tool version: OCZ_Tools_316-old.zip. From my experience, the newer version doesn’t work on the 2012 Macbook Pro.
    3.Download the “Universal USB Installer” for Windows, and follow the steps to install the ISO to your Thumb Drive using the instructions located on the OCZ Forum. http://www.ocztechnologyforum.com/forum/showthread.php?99275-NEW!-Bootable-Linux -based-tools-for-OCZ-SSD-s&p=714047&viewfull=1#post714047
    4. Once the ISO is successfully copied to the Thumb Drive, insert the USB stick into your Mac with the OCZ SSD installed in the Main Bay, Power On, and hold down the “Option” key. You should see a yellow hard disk icon that says “Windows,” select it and press enter.
    5. Once the OCZ Tool loads up, click the “Green Arrows” to put the drive into Sata II mode. Shutdown the computer, power on, and check the System Profiler. The drive should be running at Sata II speeds.
    6. Shutdown the computer and boot into the OCZ Tool, and click on the “Red Arrows.” This will reset the controller to its default mode of Sata III (Sata 6 Mode).
    7. Check the speed of the drive using the disk speed test of your choice. The drive should now be running at full speed.
    The biggest accomplishment here was actually getting the OCZ Linux Live Tool to load on a 2012 Macbook Pro. The newer version of the tool doesnt support the USB 3.0 drivers, so you loose the funtion of your trackpad and keyboard or bluetooth keyboard and mouse.
    **Note: Black Magic Disk Speed Test Version 2.0 may give you lower numbers than expected due to the compression method in testing the drive. I would prefer using XBench or Disk Speed Test Version 1.0**   
    ***Here's a link to a thread that explains how to properly install your OS onto the drive. If not done correctly, this can also cripple the speed of the drive.***
    Drive Preparation
    https://discussions.apple.com/thread/3381208?start=0&tstart=0

    I can almost see a big grin appearing in Bob's avatar... 
    Hopefully his reply has given you a clue already?
    If not, some explanation:
    Many settings in the standard "Media" panel (for both video and audio) don't apply for publications that need to go the Folio-way. This panel is mainly concerned with lovely Flash stuff, but apart from the Poster frame and the Markers, it is useless for Folio's.
    A quick guide: create a video with the necessary codec (H.264 for video, MP# or AAC for audio) at the required pixel size (exact width/height). Simply Place the file in InDesign, but don't scale it (or recreate and place a properly sized new video afterwards). Choose what to do with the Poster frame (and maybe some Markers), but all other settings are done in the Overlay Creator.
    Check Bob Bringhurst's Tutorials and his DPS Tips app for more info. But I guess you get the idea now.

  • Driver prog for tcode vf01 r  script mr_print

    hi friends,
    i have checked out driver prog in tnapr for vf01 / mr_print
    but it z giving a sub routine pool prog RM08NAST.
    i havwe migrated dat mr_print script to smart form but it z giving errors at the declartions level.
    so i need to find out how they declared it in the stad driver prog of mr_print
    pleaase let me know the driver prog for mr_print r vf01.

    print program is RLB_INVOICE

  • On my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    on my macbook pro the hard drive icon is not on my desktop and I don't know how to find the hard drive or get the icon back on my desktop

    Click on the Desktop. From the Finder menu select Preferences. Check the boxes for what you want on your Desktop. If they are already checked, then try unchecking and rechecking.

  • How to wipe the hard drive on a screen-dead Powerbook G3?

    The display on my 1998 G3 Wallstreet Powerbook recently went black and the computer made a noise that I understand is called The Chimes of Death, although the hard drive still makes whirring noises. My local and trustworthy Apple repair service assures me the Powerbook wouldn't be worth repairing even if they could get the parts for such an old machine.
    Is there a way to wipe the hard drive and make my data irretrievable before disposing of the computer?
    If there's no way to wipe the hard drive, I'd like to find out: (1) How to remove the hard drive. (2) The best way to destroy the hard drive or at least make it forever unreadable (can my shredder eat it?). (3) The correct way to dispose of a Powerbook that has heard the Chimes of Death. (From what the repair service says, I assume nobody would want it as a donation.)

    Turtlewiz,
    I would not be so quick to pronounce it dead:
    http://docs.info.apple.com/article.html?artnum=14438
    I would try the suggestions in the above article. Will it boot to a CD?
    As far as wiping the drive, it is easy as long as you can see a display so you can follow the steps necessary. You just open Drive Setup in the Utilities Folder on the CD > select 'zero all data' in the Initialization Options; do it a few times if concerned.
    Removing the HD is relatively easy: Just lift off the keyboard and the heat sink, then remove the HD.
    http://www.ifixit.com/Guide/3.0.0.html
    Hit the HD a few times with a hammer and nobody will bother with it...it has a glass platter.
    Nothing to offer on the recycling except Good Will may still take it as "non-working" since there are Mac users looking for such bargains.

  • How to Enhance the Standard Report?

    Hi All,
    How to Enhance the Standard Report? :
    When I am trying to execute the query called ZTIMES in the user group SQ01 it is navigating the screen to selection-screen with some inputs to be given here on the selection screen company code is mandatory as an input. The company code field is having the search help and it is fetching the values for the company code from table called PROJ  Table (Project definition Table).But I want the company code should fetch the value from the  PRPS Table ( Work break structure(WBS Element) Level).
    Tables used are PROJ and PRPS.
    The company code in PROJ is PROJ-VBUKR
                                    In PRPS is PRPS-PBUKR
    In the coding part related to that selection screen I have to replace PROJ-VBUKR with
    PRPS-PBUKR.But it is standard report to enhance.
    What is suggestible solution for this issue?
    Thanks,
    M Raju

    Hi,
    Since this is an ABAP Query, You can change the infoset query in SQ02 and establish the join linkages between PROJ and PRPS
    Also on the selection screen of the Query make sure you provide company code from PRPS table and report output also from the same table reference.
    Once you have modified the ABAP Query, activate and generate it so that it will internally regenerate the a standard program.
    http://help.sap.com/erp2005_ehp_02/helpdata/en/d2/cb4256455611d189710000e8322d00/frameset.htm
    ABAP Query (Sq01)Modification
    Hope this helps
    Regards,
    Shiva

  • HT203909 Why can't you provide specific instructions here about how to make the USB drive bootable?  The article referenced is not dedicated to Bootcamp--too long, too many options.  How do you make it bootable?

    Why can't you provide specific instructions here in HT203909 (Boot Camp: Creating an ISO image from a Windows installation DVD) about how to make the USB drive bootable?  The article referenced for partitioning the drive is not dedicated to Bootcamp--too long, too many options.  How do you make it bootable?

    If your BC Assistant shows the option to create a USB Installer, it automatically is marked as bootable. There is no need to have manual intervention to make a bootable USB. Once the process is manually modified, it is supported by the person modifying it.
    You have two or three options (depending on your Mac Model).
    1. Create USB... - Use a USB2 flash drive, which is erased and formatted. If your Mac supports ISOs then BCA will prompt for the Media. Any Mac which does not have a built-in Optical drive will support an ISO. There are specific Mac models which support both, DVD and USB based installation.
    2. Download Software from Apple servers...
    3. Install Windows...
    Are any additional instructions really necessary?

  • Adding logo to the standard PO Output for communication program

    Hello All.
    I need to add company logo to the Standard PO Output for Communication program. Can someone please tell me a way to do this. I went into applications and see its a Java Concurrent program. I even went into these forums and I saw there is a way to uncomment out the line in the XSL file and add the logo there , but how do I upload back to the template. The Upload Button is disabled for this template.
    Can we use the Standard Purchase Order Stylesheet for this?
    If so how to make changes and how can I upload it back?
    Should I do an RTF temnplate?
    Can someone pl help me here. We are on R12 and I am not much familiar with exposting RTF to XSF FO.
    Thanks
    Vidhya

    We took the standard PO document XSL-FO template and enhanced for our own needs. The first of those is to utilize the company's logo. Search for 'external-graphic' in the xsl-fo template. The first hit will be the section for the logo. The comments in the template provide some guidance on what to change. For our company, I changed the URL to point to a .gif file on the Apps server ($OA_MEDIA/company_logo.gif) .
    The one downside that I have found so far, is that I am have to hard-code the entire document path. This path will change between instances. So I once our production instance is defined, I will set it to that path.
    - Scott

Maybe you are looking for