How to apply a change from logical to retional model without populate eryth

How to apply a change from logical model to retional model without populate everything? Thanks!

I know it. Thanks!

Similar Messages

  • How to move the changes from one system to other without using CMS

    Hi
    In our project they are migrating NWDI 6.40 to NWDI 7.0.
    During migration CMS won't be available.
    Could you plesae tell what are the different options are there to move the WebDynpro changes from (NWDS) Development to Quality system and then production system without using CMS server?
    If i will create a development package and import this packgae in Quality package will my new changes also be available in Quality server?
    Thanks & Regards
    Susmita

    Hi Susmita
    I wasn't completely sure, but from your description of your problem, it seemed like you would have access to your DTR during your upgrade. The following solution assumes as much. If this is not the case, you'll need to do things slightly differently, but the solution will still be possible.
    Depending on the scope and size of your changes, it may be practical for your developers to deploy directly from their NetWeaver Developer Studio (or for a designated administrator to install the NWDS and do the same). To do so, from the Development Configurations perspective, create a new NWDS project for each of the DCs you want to deploy. Then right-click the project and choose from one of the deployment options. (Deploy new archive and run will allow you to see if your deployment has taken effect.) When deploying, the target server is the one set up as your J2EE engine in the NWDS properties - you'll consequently have to modify this when the target server for your deployment changes (from QA to production, or vice versa).
    Note that this is only applicable in certain situations, and only as a short term stopgap measure. This sort of practice - developers or administrators deploying haphazardly to servers other than those intended for development - is precisely what the NWDI is designed to prevent (and is one of very few things it's fairly good at doing). For instance, if your QA and production systems are attached as TEST and PROD runtimes systems respectively in your NWDI, a full assembly and subsequent full deployment would usually occur to these servers when deploying with the NWDI. This is a much stronger guarantee of consistency than the build that will be performed within your local NWDS to deploy your changes. (Conversely, the rigidity of the assembly is perhaps the NWDI's greatest design flaw.)
    (Also, Snehal: thanks for the information on the sapmake_util blog. It's not something I've encountered before and looks very useful.)
    James

  • How to apply the changes in logical standby database

    Hi,
    I am new to Dataguard. I am now using 10.2.0.3 and followed the steps from Oracle Data Guard Concepts and Administration Guide to setup a logical standby database.
    When I insert a record to a table from the primary database side, when i query the same table from the logical standby database, it doesn't show the new records.
    Did I miss something? What I want to do is when I insert a record in the primary db, then the corresponding record will be inserted in the standby db.
    Or I totally misunderstand what Oracle data guard is? Any help are appreciated.
    Denis

    Hi
    Can anyone help to answer me is my logical standby db have a archive gap?
    SQL> SELECT APPLIED_SCN, APPLIED_TIME, READ_SCN, READ_TIME, NEWEST_SCN, NEWEST_T
    IME FROM DBA_LOGSTDBY_PROGRESS;
    APPLIED_SCN APPLIED_TIME READ_SCN READ_TIME NEWEST_SCN
    NEWEST_TIME
    851821 29-JUL -08 17:58:29 851822 29-JUL -08 17:58:29 1551238
    08-AUG -08 08:43:29
    SQL> select pid, type, status, high_scn from v$logstdby;
    no rows selected
    SQL> alter database start logical standby apply;
    Database altered.
    SQL> select pid, type, status, high_scn from v$logstdby;
    PID
    TYPE
    STATUS HIGH_SCN
    2472
    COORDINATOR
    ORA-16116: no work available
    3380
    READER
    ORA-16127: stalled waiting for additiona 852063
    l transactions to be applied
    2480
    BUILDER
    ORA-16116: no work available
    2492
    ANALYZER
    ORA-16111: log mining and apply setting
    up
    2496
    APPLIER
    ORA-16116: no work available
    2500
    APPLIER
    ORA-16116: no work available
    3700
    APPLIER
    ORA-16116: no work available
    940
    APPLIER
    ORA-16116: no work available
    2504
    APPLIER
    ORA-16116: no work available
    9 rows selected.
    Thanks a lot.
    Message was edited by:
    Denis Chan

  • How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    How to configure a map of patches names of my midi device in order to insert program changes from Logic?

    Thomjinx wrote:
    You can usually use a patch editor-librarian program like Sound Diver or MidiQuest to copy and paste the patch names (one bank at a time) into the patch name list of a multi-intsrument object in the environment.
    That's what I do.  Works like a charm.
    Cheer,
    Thomjinx
    "My first copy of Logic came on Floppy disks"
    And you will need to setup bank change commands for your particular instrument, if it does in fact have several banks of internal patches. Logic comes with a selection of bank change commands, one of them will almost always work.
    My first copy of Logic came on floppies, two of them I think and was MIDI only, moved up to Logic_Audio at version 3.0 I think.

  • How do I update/upgrade from Logic Pro 8 to 9?

    How do I update/upgrade from Logic Pro 8 to 9?

    There is no update, you have to purchase Logic 9 from the App Store, it's $199, which is close to the price of an update.
    Warning, if you do purchase Logic 9 from the App store it will download 2GB of additional patches/sounds/loops...etc. This is for first time buyers so their App Store Logic will have some basics to work with before trying to download the additional 20+GB of loop/instrument data. If you have a full installtion of Logic 8 it's possible the 2GB of data Logic initially downloads will mess with the instruments and sounds you've been using, past projects may not load properly. Just something to be aware of.

  • HT3696 How its' possible to change from 32 bit to 64 bit Processor for MacMini?

    How its' possible to change from 32 bit to 64 bit Processor for MacMini? Mini?

    You probably have a Core Solo or Core Duo model. You can upgrade the CPU to a 64-bit Core 2 Duo in the T7200-T7600 family.
    iFixit and OWC provide easy-to-follow, step-by-step guides. It's a delicate procedure, but not overly difficult. I'm all thumbs, and I have done it twice.
    Cheers!

  • HT201210 how can i retrieve texts from an earlier back up without changing all the other settings on my iphone?

    how can i retrieve texts from an earlier back up without changing all the other settings on my iphone?

    You can't. Restoring from a backup is all or none.
    You can use a utility such as this one to extract the messages from the backup on your computer but you can't re-transfer the messages to the Messages app on your iPhone.
    http://msb.macsupport-pr.com/

  • When running a "stand-alone" APP..how do I send midi from Logic?

    Hi all,
    When running a "stand-alone" APP..how do I send midi from Logic?.....Please no IAC stuff it doesn't work.......thanx
    SvK

    using IAC here no problems. works very well.
    you can host your au's in another app such as soundflower or au lab, but you are still going to need to get it to hear midi. you can use physical midi ports with something like a MTP midi interface, and getting the midi by routing the out of one port to the in of another (midi loop) but you have to be careful logic doesn't listen to the same midi signal or everything will jam up (midi feedback).

  • How can I transfer contacts from my Iphone to ipad without using a computer?

    How can I transfer contacts from my Iphone to ipad without using a computer?

    The easiest method is to setup an iCloud account, turn on Contacts syncing in Settings > iCloud on both devices, and the Contacts from the iPhone will sync to the iPad.

  • How do I transfer files from one computer to another without using cables??

    How do I transfer files from one computer to another without using cables?

    Wifi network
    Email
    Thumb Drive
    Online storage such as, iCloud Google Docs, SkyDrive, etc.

  • Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

    Can i use another storage flash for my apple air mackbook(change from current 128Gb to 256GB without any issue)

    There are some upgrade options available from do it yourself sites.
    See the MBair SSD upgrades on mid way down this page:
    http://eshop.macsales.com/shop/SSD/OWC/

  • How do I transfer photos from MacPro to iPad 2,without using iPhoto

    How do I transfer photos from MacPro to iPad 2,without using iPhoto on the ipad.

    You can use Photo Transfer App
    http://i1224.photobucket.com/albums/ee374/Diavonex/Album%205/35cf0e9c02b37da4016 bdc657debcaca.jpg

  • How can I make albums from events then delete events without deleting the album?

    Hey, just need a little help!
    How can I make albums from events then delete events without deleting the album?
    Many thanks

    You'll be more likely to get help with this if you ask in the iPhoto forum:
    https://discussions.apple.com/community/ilife/iphoto
    You'll need to tell people what version of iPhoto you have so they can give you correct advice.
    Regards.

  • How do you delete contacts from your phone for good without having it appear in the messages app?

    How do you delete contacts from your phone for good without having it appear in the messages app?

    Hi tieyce,
    You need to hook up your iPhone, select it under Devices, and then go to the Photos tab on the Device Profile, and uncheck Sync Photos, then sync. That should delete all photos that were downloaded from your computer.
    When you say you have 2 separate albums of the same sets of pictures, what 2 albums are you referring to? Can you provide us with names of those "duplicate" albums?
    Cheers,
    GB

  • How do I delete email from my iPad and iPhone without deleting it from my laptop?

    how do I delete email from my iPad and iPhone without deleting it on my laptop. I'm trying to free up space.

    It would depend on the type of mail account you are using. If you have an IMAP or Exchange account deleting mail from one client is going to sync to the other clients. You cannot remove from one device and not the others. POP mail however, does allow one to delete mail from one client and it remain on the other clients. Because POP mail is downloaded to the individual clients, whereas mail in IMAP and Exchange resides on the server, and is just viewed on the individual machines.

Maybe you are looking for

  • How to clear GRIR with ARCHIVED matl doc? - MR11 won't work

    Hi All, I am having a problem in which the material document(GR document) of the P.O has been archived,but the user is trying to do MR11 which will obiviously not work as the GR/IR accounting maintenance checks for the reference documnet and is not a

  • Where are APEX images retrieved from in an n-tiered environmen?

    Oracle XE DB 11gR2 Oracle APEX 4.1.1 Glassfish 3.1.2 Red Hat Linux 5.8 =========== I notice when using Glassfish as part of my APEX environment I am required to copy the images to an /i directory on the Glassfish server under the Glassfish domain. Th

  • Kuler API doesn't work with Windows 8 apps

    Hi, I've been trying to get the Kuler API to work with my app for Windows 8 (I'm using C# and XAML). For example: string feed = await client.GetStringAsync("https://kuler-api.adobe.com/rss/get.cfm?listType=" + type + "&itemsPerPage=" + items + "&time

  • Static routes for load balancing

    if I point 2 statics to 2 destinations, does it load balance, i.e first traffic goes one way, next goes the other ?

  • Converting report to PDF in WAD 7.0

    Hi, I have been using WAD 7.0 for designing templates. I have a function for printing, wherein the Analysis item gets converted to a PDF and then the user can print this. The default paper size is "DINA4 or Letter (8.5x11 inch)", but i want to get th