How to apply AIA Patch using Opatch

i have an oracle aia update patch...how can i apply this patch using Opatch.......cann any one say me the procedure of doing so....
Quick reply is appreciated....
Regards
GSK

To apply patches on top of AIA 10g you need a Standalone patch.
In my case, i had to apply a patch on top of AIA 2.5 version.
-I had to apply a Stand alone patch. The version used is stand alone opatch 11.1.0.0.0 . this can be downloaded from the oracle support site.
-After applying the stand alone patch, you can apply the aia update patch. .
- opatch apply -oh <AIA_HOME> -jre <SOA_HOME>/jre/1.4.2
AIA_HOME - Complete directory path where AIA_HOME is installed
SOA_HOME - Complete directory path where SOA is installed
Follow the instructions given in the readme and should be able to do it.
Hope this helps

Similar Messages

How to apply Critical patch update

Hi all,
I want to kow how to apply Critical patch update of oct2009 in RHEL for oracle 9.2.0.8.

user600286 wrote:
Note 881382.1(section 5.8) states the terminal CPU for 9.2.0.8 will be CPUJul2010. The CPUOCT2009 can be downloaded for 9.2.0.8 as patch 8836758.
Thanks for the correction. I may have seen an earlier revision.

Documentation on how to apply critical patch updates

Hi,
Can anyone send me links to some good documentation on how to apply critical patch updates to 9i & 10g databases on both Windows & Linux?
I'd like a step-by-step explanation, with detailed examples since this is the first time I'm going to do this.
Thanks!

Get the latest patch update reference number from Note:753340.1 , downlaod it (Metalink) and go through its README

How to check whether a patch is applied or not when we apply a patch using patch.sh in oracle apps 11i

Hi,
If we apply patch using adpatch,we can know whether the patch is applied or not by checking ad_bugs,even with opatch we can check by using opatch lsinventory...
But when we apply patch with patch.sh then how can we find out whether a patch is applied or not.
I have to apply patch 14615390 and 16414360...but how can i know whether those patches are already applied or not. We have jre upgrade so we need to find out whether these patches or already applied or not.
Thanks in advance,

These are patches for Forms aren't they?
I think this has been addressed before
How to know if a patch has been applied to Forms?
As the mighty Hussein points out in that post, refer to How to verify if a patch has been installed (Doc ID 105158.1)
DA

OutOfMemory while applying patch using OPatch

I`m apply patches...
About 10 of patches was successfully applyed...
But when I apply one patch I have an exception java.lang.OutOfMemory
does any have this trouble?
i have installed Oracle 9i Rel 2 on Linux

Hi Muba,
While applying this patch 16784403 & follow the post install task Step 4.1: Redeploy the new Forms EAR file (Conditional) of note 437878.1 after application of this MLR patch,4.2 Regenerate JAr files
do i need to stop all application services? as of this is OPatch, dont need to stop the application while applying this patch & post install step.
Please stop all application services and apply the patch. It is not mandatory you shutdown the DB, but if possible recommend to shutdown DB as well, and apply patch.
Then as post installation, regenerate JAR files using adadmin.
Thanks &
Best Regards,

Installing patches using OPatch

Hi All,
We are planning to upgrade oracle version 10.2.0.2.0 to Oracle patch set 10.2.0.5
Current opatch version is :
bhluksmp:orasmp 68> opatch version
Invoking OPatch 10.2.0.2.5
OPatch Version: 10.2.0.2.5
since i m upgrading oracle from 10.2.0.2.0 to Oracle patch set 10.2.0.5.
1.so do i need to apply the opatch10.2.0.5 or just use the existing version of opatch.
2.Upgrade opatch after i have upgraded to 10.2.0.5.
Thanks

Hi,
Before you do anything I'd advise you to read ALL related notes.
You have downloaded 2 SBP, they are cumulative, therefore you do not need them.
The note about MOPatch indicates you how to install the patches
I already mentioned you that the SBP is installed with the Mopatch tool and note 1431752 gives you an explanation on how to do it.
You do NOT unzip the files that you download, MOPatch works with the zipped file:
1. Call the following path of the SAP Software Distribution Center:
    http://service.sap.com/oracle-download
    -> Database Patches -> Oracle -> Oracle 10.2.0.5
2. Open the platform directory and download the SAP Bundle Patch file
    SAP_<Release>_<Date>_<Platform>.zip, the SBP README
    README_<Date>_<Platform>.htm, and the SBP patch history
    BUGSFIXED_<Date>_<Platform>.htm to your database server.
3. Use MOPatch (SAP note 1027012) to install the SAP bundle patch in
    accordance with the instructions in the SBP README. When you do
    this, pay particular attention to the patch-specific installation
    instructions.
You download the latest OPatch and MOPatch from
http://service.sap.com/oracle-download
    -> Database Patches -> Oracle -> Oracle 10.2.0.5 -> Opatch
Please, READ and think before you do anything.
SAP Notes and documentation are there for something.

How to apply O'patch

Hi all,
i want apply O'patch in my hp server, please let me know procedure for apply.
in standard procedure, sap say's
Ensure that the directory containing the opatch script appears in
your $PATH; then enter the following command:
% opatch apply
How to done or how to check aboue lines.
Regards,
satish

hello,
this question is already answered in the Forum. There is also notes about it.
On the left upper corner there is a box called "search", it is really easy to use, no kidding here.
If you would have done so, you would have find the following thread:
Re: How to install the oracle patch in the HP_ux server.
or
Re: O patch apply procedure in Hp-ux and IBM aix
or the SAP Note 306408 OPatch: Oracle tool for patch installation.
If you have oracle 10g, the explanation is also valid, but there is a note specific for it. Lets see if you are able to find it

How to apply signed patches to Studio 11 under Solaris 10?

I'm running Solaris 10 6/06 on a Sun W2100z (x86_64) workstation. I have a long history of experience with Solaris, but I'm not terribly familiar with the things that are new or different with 10, including zones and the new patch management tools.
I want to apply the latest patches to the various components of Studio 11, e.g. 120759-08,
121018-04, etc. Since all the other patches I've applied (for other OS subsets) have been "signed" patches, I was hoping to stay consisent and apply signed patches to Studio 11 too. I've been foiled at every attempt, though, so I'm looking for some help.
- if I use /usr/bin/updatemanager to select and attempt to apply the patches, I just get error
messages saying that the patches could not be applied:
121016-03 Sun Studio 11_x86: Patch for Sun C_x86 5.8 Compiler            Failed
Utility used to install the update failed with exit code {0}.
120762-02 Sun Studio 11_x86: Patch for Performance Analyzer Tools       Failed
Install of update failed. Utility used to install the update is not able to add packages. Utility used to install the update failed with exit code 5.... and so on.
- if I try using "smpatch" to add the patch, I get this error:
$sudo smpatch add -i 120759-08
add patch 120759-08
Transition old-style patching.
Patch 120759-08 failed to install due to a failure produced by pkgadd.
pkgadd: ERROR: The package <SPROlang> is currently installed on the system in the
global zone. To install the new instance of this package in the global
zone only, you must specify the -G option. To install the new instance
of this package in all zones you must first remove the existing instance
of this package from the global zone first (via pkgrm) and then install
the new instance of this package in all zones.
pkgadd: ERROR: package <SPROlang> cannot be installed on this system/zone- if I try to use "patchadd" directly with the jar file in the current directory, I get this:
$sudo patchadd 120759-08
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
120759-08
Verifying signed patch <120759-08>...
Verifying digital signature for signer <es-signature>
ERROR: Signature verification failed while verifying certificate <subject=Sun Microsystems Inc Root CA, issuer=GTE CyberTrust Root>:<unable to get local issuer certificate>.
ERROR: Unable to verify signature for signer <es-signature>
Signature invalid on signed patch <120759-08>.
Patchadd is terminating.That's three strikes, and I'm out of ideas. Any suggestions for how one goes about applying signed patches for Studio 11? I'll switch to unsigned if I have to, but this seems like it shouldn't be this hard.
Thanks,
Tim

I started a new thread on the updatemanager forum.
http://forum.sun.com/jive/thread.jspa?threadID=107410
I found that forum by googling for "updatemanager" and "zones", but
I couldn't find any recent information on this issue. It seems the
problem has been known about for a while now.
--chris

How to apply Bundle Patch in Rolling Mode for 2 Node RAC

Hi Guys,
I have a 2 node RAC environment (11.2.0.3) where each node has there own local Grid_home and RDBMS_home.
I am installing a Rolling Bundle Patch with OPatch in this environment. The installation document says that "The order of patching in RAC install is GRID_HOME, then RDBMS_HOME" so i did the following.
1. stopped all oracle related services on node1
2. set oracle_home=<Grid_home>
3. applied the opatch
4. opatch succeeded on node1 and it says "The node 'NODE2' will be patched next... Is the node ready for patching? y
Here i am bit confused.
1. Should i shutdown the oracle services in Node2 and continue to patch the Grid_home ? If yes then the DB will be completely down for user access. This defeats the purpose of rolling mode which says there is no downtime.
2. Should i patch the RDBMS_home on node1 , start all the oracle services on node1 , stop the oracle services on node2 and then resume the opatch on node1 which is waiting to patch the Grid_home on node2 ?
Please advice.
Thanks,
Ashok Kumar.G

Hi Sebastian,
14613223 patch install instruction did not mention about opatch -local option.
Here is what i followed and completed the installation successfully.
1. Shutdown all oracle services on node 1
2. applied opatch for grid home and then rdbms home using "opatch apply -local" on node1
3. Started all oracle services on node 1
4. Shutdown all oracle services on node 2
5. applied opatch for gridhome and then rdbms home using "opatch apply -local" on node 2
6. Started all oracle services on node 2
7. executed post installation steps on the DB (@catwinbundle.sql & @utlrp.sql )
Thanks,
Ashok Kumar.G

How to apply CPU patch

Hi...guys...
I want to apply the CPU patch for 2-NODE RAC Database..
Actually I never applied patches..plz can any one guide me how to apply the CPU patches for RAC...
As per as my knowledge..
1.apply the patch for clusterware.
2.apply the patch for database level...
is its right...
Another thing is how to upgrade the 10.2.0.2 to 10.2.0.4 for RAC ...
plz help me..

Hi,
you are right, clusterware always has to be on the same or higher patchlevel as/than the database so you will patch it first. Generally, the hardest part is finding the patch on metalink, once you have found it, there is a readme with every patch that has very detailed instructions on what to do. For CPUs and other patches, you will generally bring down services on one node, then run opatch on that node. Once it is done patching, it will tell you to restart all services on that first node and shut down services on the other node(s). Once you hit OK opatch will continue to patch the remote hosts.
The upgrade to 10.2.0.4 will be a bit more complicated. AFAIR there is a real installer with that one and once you are done patching the software you also have to patch the database itself which means downtime.
Bjoern

Three questions on patching using opatch

Version: 10gR2, 11g
OS : AIX 6.1
1. In a Non-RAC environment,when using the opatch utility, Should i shutdown the instance running from the ORACLE_HOME which is being patched?
2. We have an 11g oracle instance running for a test OLTP environment. The datawarehousing guys wanted an 11g instance in this machine. So i used DBCA to create another database from the same ORACLE_HOME of the OLTP database. The inti.ora parameters for DSS and OLTP were different , this is why i had to create a separate instance. So, when i use the opatch to apply a patch, the changes will be reflected on both our DSS and OLTP databases. Right?
3.
On Re: Opatch vs upgradation patch set
Rober geir says
For rollups opatch is used (e.g 10.2.0.4.0 to 10.2.0.4.1)
For upgrades (e.g 10.1 to 10.2) then OUI is used (not opatch)
What does the term rollup mean?

1. Yes, you should shutdown instances running on that home. The readme.txt should confirm this, and when you run opatch it will ask if you have shutdown.
2. opatch only patches the ORACLE_HOME, which is used by both databases. Check the patch readme.txt if there are any database steps (which will need to be run on both databases)
3. small bugs are fixed by small patches. To avoid having to apply many small patches Oracle groups them into larger patches which include multiple small patches. Often you will need to use the "napply" parameter for opatch when you apply these patches.
Always read the patch documentation before you apply it to be sure you understand what it does.
Always run the patch on a test environment before you run on PROD.

How to apply Security Patch

How do I apply the "DOS Attack" security patch for WLS 6.1 on Win2K
Please help
Thanks

Balram,
Put the jar file in the front of your classpath to apply the patch.
Regards,
Michael
Stephane Kergozien wrote:
Hi Balram,
You will find security patches for WLS 6.1 in the following URL
http://dev2dev.bea.com/index.jsp
advisories and notifications Paragraph
Regards
Stephane
Balram wrote:
How do I apply the "DOS Attack" security patch for WLS 6.1 on Win2K
Please help
Thanks--
Regards,
Stephane Kergozien
BEA Support--
Michael Young
Developer Relations Engineer
BEA Support

[SOLVED]How to apply a patch- first attempt

I need to apply a patch to python2-pillow, which was kindly created by manisandro, to allow my HP Officejet 6700 scanner to work. I'm following the directions at Patching in ABS. I already have the python2-pillow package installed via pacman. I generated the md5sum for the patch by copying and pasting the text into gedit and saving it locally as a .diff file. I then ran md5sum on the file. The following is a copy of my PKGBUILD:
# $Id: PKGBUILD 105239 2014-02-03 10:02:23Z heftig $
# Maintainer: Kyle Keen <[email protected]>
# Contributor: minder
pkgbase=python-pillow
pkgname=(python2-pillow)
pkgver=2.3.0
pkgrel=3
_appname=Pillow
_py2basever=2.7
_py3basever=3.3m
pkgdesc="Python Imaging Library (PIL) fork. Python3 version."
arch=('i686' 'x86_64')
url="http://python-imaging.github.io/"
license=('BSD')
makedepends=('python-setuptools' 'python2-setuptools' 'lcms' 'libwebp' 'tk' 'sane')
source=("http://pypi.python.org/packages/source/P/$_appname/$_appname-$pkgver.zip" "https://github.com/manisandro/Pillow/co … 37c43.diff")
md5sums=('56b6614499aacb7d6b5983c4914daea7' 'a0bcc91288508e1d572e89b8a074c215')
build() {
cd "cd $srcdir/$pkgname-$pkgver"
patch -p1 -i $srcdir/8324a9a3e08413423c8ade7fb02db7ace0637c43.diff
cp -r "$srcdir/$_appname-$pkgver" "$srcdir/${_appname}2-$pkgver"
package_python-pillow() {
depends=('python' 'lcms' 'libwebp')
optdepends=('tk: for the ImageTK module'
'sane: for the Sane module'
'python-pyqt4: for the ImageQt module')
cd "$srcdir/$_appname-$pkgver"
python3 setup.py install --root="$pkgdir/" --optimize=0
pushd Sane
python3 setup.py install --root="$pkgdir/" --optimize=0
popd
install -Dm644 docs/LICENSE "$pkgdir/usr/share/licenses/$pkgname/LICENSE"
install -dm755 "$pkgdir/usr/include/python$_py3basever/"
install -m644 -t "$pkgdir/usr/include/python$_py3basever/" libImaging/*.h
# clean up bins
cd "$pkgdir/usr/bin"
for f in *.py; do
mv "$f" "${f%.py}"
done
package_python2-pillow() {
pkgdesc="Python Imaging Library (PIL) fork. Python2 version."
depends=('python2' 'lcms' 'libwebp')
optdepends=('tk: for the ImageTK module'
'sane: for the Sane module'
'python2-pyqt4: for the ImageQt module')
provides=('python-imaging' 'python2-imaging')
conflicts=('python-imaging' 'python2-imaging')
replaces=('python2-imaging')
cd "$srcdir/${_appname}2-$pkgver"
python2 setup.py install --root="$pkgdir/" --optimize=0
pushd Sane
python2 setup.py install --root="$pkgdir/" --optimize=0
popd
install -Dm644 docs/LICENSE "$pkgdir/usr/share/licenses/$pkgname/LICENSE"
install -dm755 "$pkgdir/usr/include/python$_py2basever/"
install -m644 -t "$pkgdir/usr/include/python$_py2basever/" libImaging/*.h
# clean up bins
cd "$pkgdir/usr/bin"
for f in *.py; do
mv "$f" "${f%.py}2"
done
When I run makepkg I get an error saying I am missing several dependancies: tk, python2-setuptools. I don't get this error if I reinstall the package using pacman. Shouldn't the dependancies be the same? It also seems to be packaging python-pillow rather than python2-pillow. Is there a way to fix this?
Thanks for any help.
Last edited by barronmo (2014-03-08 06:18:38)

Fixed checksum problem. The makepkg had worked in part the the .diff file was in the source directory. I ran md5 on that and it worked. However, new problem:
==> Starting build()...
/home/sl/abs/pillow/PKGBUILD: line 21: cd: cd /home/sl/abs/pillow/src/Pillow-2.3.0: No such file or directory
==> ERROR: A failure occurred in build().
Aborting...
However,
[sl@localhost pillow]$ cd /home/sl/abs/pillow/src/Pillow-2.3.0
[sl@localhost Pillow-2.3.0]$
Changing permissions to 777 didn't help.

How to apply exaile patch?

i have an error trying to import the database
some error about utf-8 unicode name
i found this patch
http://launchpadlibrarian.net/10569943/db.patch
but i don't know how to apply it
anyone know how?
thanks

just download the patch somewhere; e.g /tmp
patch -i /tmp/db.patch /usr/lib/exaile/xl/db.py

How to Apply PSU patch on GI home 11gr2?

Hi,
My databases is running on 11gR2 RAC ? I am not able to get notes for applying psu patch on Grid_HOME..
GRID_HOME=11.2.0.2
DB_Version=10.2.0.5
do we need to stop RAC services on GRID_HOME?
Please help us
Thanks,

Hi,
Patch apply depends on the location where you need to apply Patch, like Grid Home or Oracle Home.
If the patch is related to Oracle Home there is no need to stop any service for Grid Home.
If patch is For grid Home then surely services will need to be stopped running from grid home.
You will get better guidance from read me of the patch, and will request you to try to read it first.
There is an article on otn will help you to wt to do and when.
Regards
Gaurav

How to apply AIA Patch using Opatch

Similar Messages

Maybe you are looking for