How to apply an effect to multiple/all clips

I'm sure I'm missing something elementary here, but I can't find a way to apply an effect to multiple clips at once in PE7.  Specifically I'd like to apply the Auto Levels adjustment effect across all clips in my project (makes sense because they were all recorded at the same time), but at best can onely copy the effect from one clip or section on the timeline to another; one at a time.  When working with a project that has upward of 100 scenes, copy and pasting to each individual clip seems like a lot of tedious work that should be easier.
Does anyone have any suggestions or information that could point me in the right direction?
Thanks!
Dale

Dale,
You have discovered one of the little "gottchas" with Copy/Paste Attributes - it does it for all.
I do not know of a way to eliminate Effects globally, i.e. multiple Clips in this case. Unless there's a neat workaround, or secret switch, I think it will be by hand. That is the way it is in PrPro. Don't know about PE, but In PrPro one can select some of the Effects to Copy/Paste Attributes (for many Effects, but not all).
Side note: Render your Clips and watch them closely with Auto Levels. I find that it "pulses" and that manually setting Levels (not the Auto one) is better.
Good luck,
Hunt

Similar Messages

  • Applying effect to multiple master clips in bin

    Basically I would like to apply the timecode reader effect to multiple master clips in a bin so that I can batch export those clips to an external drive for the director to take and watch at home.
    I know how to apply an effect to multiple clips in a timeline, but is there a way to do it right to multiple master clips in a bin?
    Right now my process is to duplicate the clips for a scene as new master clips in a separate bin, one by one apply the timecode reader (as favorite effect) to each clip, then batch export those clips to the external drive.
    As I get to the scenes with many many clips, applying the effect gets a bit tedious. Just hoping there's a faster way I'm not thinking of or unaware of.
    Thanks.

    It always seems like a strange thing to do, but the standard for these kinds of things seems to be to put everything on the timeline, apply the effects (you know how), and then drag them off the timeline into a fresh bin.
    It's very quick and does the job just fine, but always somehow feels.. wrong.
    If there were a way for a timecode reader to be applied by Compressor, then it would be much more of a batch thing. But I don't think there is.

  • How to Apply adjustment layers to multiple layers that have different blending modes ...

    How to Apply adjustment layers to multiple layers that have different blending modes  and keep the colours the same as the adjusment done?
    I work in Animation painting Backgrounds.  My files are sometimes upwards to 200+ layers.
    I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
    The only way that I know of how to apply adjustment layers it to every single layer  ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and  then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
    The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY.    IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
    HEres an example of a simple File.  to show what i mean.
    https://dl.dropboxusercontent.com/u/3408266/ball%20layers.jpg
    https://dl.dropboxusercontent.com/u/3408266/ball.psd
    I have 2 adjustment layers up top.  I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.
    I can apply the adjustment layers manually and this works GREAT for all Layers set to normal.  THey take on the colour change just FINE.
    However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
    How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration  and The new colour taking efffect exactly how i looks before i apply the adjustment layers?
    Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be seperate! 
    I'm assuming what I want to do is impossible? Hope this isnt confusing.  As far as i know its impossible to do what I want it to do.  but just wanted to ask and see.
    I would REALLY REALLY love to talk to a adobe programmer/ technician/pro working at adobe about this.  Theres just no way to get in touch with anyone... =(
    any thoughts ?

    Sure... if you want to put it that way. Either way its not the desirable outcome. 
    its just frustrating that theres no way to apply adjustment layers to hundreds of layers while keeping them in the same configuration ( blendmodes,  layer order ,  without merging)  while keeping the same end result.
    works great if all your layers are set to normal though..    But I really need to keep shadow layers seperately and be able to adjust on the fly aswell as apply those adjusment to all my layers.
    I suppose that just isnt possible.   I understand the math required for this would be tremendous/ complicated if something like this would ever be implemented.  Would be nice if adobe could come up with some solution to this.  Its really a huge issue in my work flow and theres no alternatives.    How else can I adjust colours to 100+ layers  with a few clicks that lets me play around the the adjustment until im happy with the outcome.    Really wish i could adjust and the quickly apply that adjustment to all my layers regardless of blend mode.   LIke If the Layers with blendmode could somehow take the properties of the adjustment layer and keep adjusting those layers undereathe on top of that blended mode that its doing...   

  • How to apply List box for multiple selection of rows  in ALV report ?

    Hi Exprots,
    1: How to apply List box for multiple selection of rows  in ALV report ?
    Thanking you.
    Subash

    hi,
    check the below program.
    REPORT zalv_dropdowns.
    *Type pools declarations for ALV
    TYPE-POOLS : slis.
    *data declarations for ALV container,ALV grid, Fieldcatalogues & layout
    DATA: g_grid  TYPE REF TO cl_gui_alv_grid,
          g_custom_container TYPE REF TO cl_gui_custom_container,
          gt_fieldcat TYPE lvc_t_fcat,
          gs_layout TYPE lvc_s_layo.*INTERNAL TABLE AND WA DECLARATIONS FOR t517 A table
    DATA: gt_outtab TYPE STANDARD TABLE OF t517a INITIAL SIZE 0,
          wa_outtab TYPE t517a.
    START-OF-SELECTION.*Call to ALV
      CALL SCREEN 600.*On this statement double click  it takes you to the screen painter SE51.
    *Create a Custom container and name it CCONT and OK code as OK_CODE.
    *Save check and Activate the screen painter.
    *Now a normal screen with number 600 is created which holds the ALV grid.
    PBO of the actual screen , Here we can give a title and customized menus
    Here we also call the subroutine for ALV output.
          MODULE PBO OUTPUT                                             *
    MODULE pbo OUTPUT.
      PERFORM alv_output.
    ENDMODULE.                    "pbo OUTPUT
          MODULE PAI INPUT                                              *
    MODULE pai INPUT.
    ENDMODULE.                    "pai INPUT
    *&      Form  BUILD_FIELDCAT
    FORM build_fieldcat.
    DATA ls_fcat TYPE lvc_s_fcat.
    *Build the field catalogue
      CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
        EXPORTING
          i_structure_name = 'T517A'
        CHANGING
          ct_fieldcat      = gt_fieldcat.
    To assign dropdown in the fieldcataogue
      LOOP AT gt_fieldcat INTO ls_fcat.   
    CASE ls_fcat-fieldname.
       WHEN 'SLART'.
    *is the first list box
            ls_fcat-drdn_hndl = '1'.
            ls_fcat-outputlen = 15.
            MODIFY gt_fieldcat FROM ls_fcat.
    is the second list box    
    WHEN 'ABART'.       
            ls_fcat-drdn_hndl = '2'.
            ls_fcat-outputlen = 15.
            MODIFY gt_fieldcat FROM ls_fcat.   
    ENDCASE.
      ENDLOOP.
    ENDFORM.                    "build_fieldcat
    *&      Form  ALV_OUTPUT
    FORM alv_output .*Create object for container
      CREATE OBJECT g_custom_container
             EXPORTING container_name = 'CCONT'.
    *create object for grid
      CREATE OBJECT g_grid
             EXPORTING i_parent = g_custom_container.
    Build fieldcat and set column
    *Assign a handle for the dropdown listbox.
      PERFORM build_fieldcat.
    *Build layout
      PERFORM build_layout.
    Define a drop down table.
      PERFORM dropdown_table.
    *fetch values from the T517A table
      SELECT * FROM t517a INTO TABLE gt_outtab.
    *Display ALV output
      CALL METHOD g_grid->set_table_for_first_display
        EXPORTING
          is_layout       = gs_layout
        CHANGING
          it_fieldcatalog = gt_fieldcat
          it_outtab       = gt_outtab.ENDFORM.                               "ALV_OUTPUT
    *&      Form  dropdown_table
          text
    -->  p1        text
    <--  p2        text
    FORM dropdown_table.*Declarations for drop down lists in ALV.
      DATA: lt_dropdown TYPE lvc_t_drop,
            ls_dropdown TYPE lvc_s_drop.
    First SLART listbox (handle '1').
      ls_dropdown-handle = '1'.
      ls_dropdown-value = '01 Primary school'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '1'.
      ls_dropdown-value = '02 Lower Secondary'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '1'.
      ls_dropdown-value = '03 Upper Secondary'.
      APPEND ls_dropdown TO lt_dropdown.
      ls_dropdown-handle = '1'.
      ls_dropdown-value = '04 Professional School'.
      APPEND ls_dropdown TO lt_dropdown.
      ls_dropdown-handle = '1'.
      ls_dropdown-value = '05 College'.
      APPEND ls_dropdown TO lt_dropdown.
      ls_dropdown-handle = '1'.
      ls_dropdown-value = '06 University'.
      APPEND ls_dropdown TO lt_dropdown.
      ls_dropdown-handle = '1'.
      ls_dropdown-value = '09 Other Establishment'.
      APPEND ls_dropdown TO lt_dropdown.* Second ABART listbox (handle '2').  ls_dropdown-handle = '2'.
      ls_dropdown-value = '10 Primary School certificate'.
      APPEND ls_dropdown TO lt_dropdown.
      ls_dropdown-handle = '2'.
      ls_dropdown-value = '20 Lower secondary/Junior high'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '30 High school diploma(B-levels)'.
      APPEND ls_dropdown TO lt_dropdown.
      ls_dropdown-handle = '2'.
      ls_dropdown-value = '31 Vocational'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '32 Matriculation'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '40 Specialist vocational certificate'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '50 College degree Level1'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '51 College degree Level2'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '52 Masters degree'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '60 Univ Degree level1'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '61 Bachelors degree'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '62 Masters degree'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '63 Licenciate'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '64 Doctors Degree Ph.D'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '89 None'.
      APPEND ls_dropdown TO lt_dropdown.  ls_dropdown-handle = '2'.
      ls_dropdown-value = '90 Unknown'.
      APPEND ls_dropdown TO lt_dropdown.*method to display the dropdown in ALV
      CALL METHOD g_grid->set_drop_down_table
        EXPORTING
          it_drop_down = lt_dropdown.ENDFORM.                               " dropdown_table
    *&      Form  build_layout
          text
    *layout for ALV output
    FORM build_layout .  gs_layout-cwidth_opt = 'X'.
      gs_layout-grid_title = 'ALV DROPDOWN LISTS'.
      gs_layout-no_toolbar = 'X'.ENDFORM.                    " build_layout
    endform.
    Edited by: S.r.v.r.Kumar on Jun 1, 2009 2:48 PM

  • How can I change the duration for all clips in iMovie 10.2

    How can I change the duration for all clips in iMovie 10.2?  I'm used to working in the older version of iMovie where all I had to do was click on the gear on the clip and change the duration. ALso could use the tool bar to set the duration for all clips. Can't figure out how to do that in this new version. Any suggestions would be appreciated.

    In the timeline select the clip whose duration you want to change. Click the adjust button at the top of the viewer and then click the i button and you can set the duration. For multiple clips select them all and in the i button type in the duration you want and it will be applied to all the selected clips. You can also change the duration of a clip in the timeline by putting the cursor over the beginning or end of a clip and dragging. A popup will show the new duration.

  • Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Hi, is there any option how I can edit duration of multiple video clips (not stills) in iMovie 11, lets say if I want them 2 seconds long? Many thanks for any advice... Tom

    Yes.
    iMovie 11 tutorials:
    http://help.apple.com/imovie/
    http://www.apple.com/ilife/tutorials/#imovie
    and also these:
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
    http://www.kenstone.net/fcp_homepage/imovie_09_stone.html#interface

  • Is there a way to apply the same transition between all clips?

    Or is there a way to apply random transitions? Either way I'm too lazy to drag a transition between every clip and hope there's a bulk way I haven't found yet. I'm using iMovie HD 6.0.2 (267).
    Thanks!
    --Daniel

    Daniel,
    To apply the same transition between all clips, select all the clips, select the transition (and timing) then click ADD (at the bottom right of the transitions screen). The transitions will be rendered, one at a time between all the clips. If you wish to change the transition, again select the required clips, select the new transition, then click UPDATE.
    I'm not aware of any way to apply random transitions.
    John

  • How Do You Apply Process Effects To Multiple Clips In A Multi-Track?

    A multi-track sequence brought over from Premiere, I have over a dozen clips from a funeral service video that need noise reduction.
    But, because it's a process effect, I can only work on one clip at a time. Furthermore, I may need to apply several passes of the NR effect to eliminate the noise without sounding weird.
    How then do I apply that effect (and its parameters) to the rest of the clips in the sequence?
    In Premiere, you can copy and paste effects (and their parameters) from one clip to another. There is no such thing in Audition that I can see.

    Hi, Alex.
    It seems you want to do some broadband de-noise processing. While one can do a noisefloor sampling from one clip and apply it to others (great for when you have multiple takes from the same setup), it may be best to noise sample each individually if the mic has moved position enough to cause the tonal characteristics to change.
    An example would be if on-screen talent is walking in an outdoor location. In one part of the location, a particular section of the clip has a lot of BG traffic noise. Another recording has a fountain in the BG - while it still may have some of the traffic in it, the predominant BG noisefloor is "strong fountain/weak traffic", so like others have mentioned, it makes more sense to make a new BG sampling to match the characteristics of this clip.
    All that being said, here is how you BATCH PROCESS / broadband de-noise a bunch of clips, it's a 4-tiered / 21-step process when starting from scratch.
                                  NOTE: there is a manual cheat after the Batch Processing lesson - skip to that if you wish
    (WARNING - this type of processing is most successful if the file has been EQ'd or gain boosted (if needed) before processing. This is also true for the noisefloor sample. It should be taken from the pre-adjusted clip so that it all matches level)
    1) find / open a source clip that best represents the BG noisefloor you wish to sample as your broadband source for processing,
    then in the WAVEFORM editor window press alt-shift-C to save this selection as a new file - give it a unique name that represents its function
         a. ideally, this selection will be more than 5000 samples
         b. should be free of non-BG noise sounds (Dx, footsteps, mouth sounds, it should sound like a very short ambiance loop)
    2) with your new sample saved and your source clip still open in the UI:
         a. load your noise print file
         b. adjust the Noise Reduction and Reduce by  sliders (I suggest you start with a noise reduction value of 100% with a reduce value of 3 to 6 dB)
         c. under Advanced Settings, set Spectral to 0%, Smoothing to 20, Precision to 7, and Transition width to 2dB - these settings
             are like painting not with a wide brush but with a thinner brush, which means less cancellation of frequencies you want to keep and less artifacting
         d. toggle on/off the Output Noise Only function to see just what you are subtracting in your process - a great way to make adjustments until your
             noisefloor-only sound is free of Dx and other Production sounds
         e. optional advanced step - in the process UI Frequency window, you can draw a curve to select the frequency ranges that will be processed - this is another
             way of "thinning the brush" so that you are NOT processing where it's not needed in the broadband range - i.e. hiss from a low-quality mic,
             open the FA window [alt-Z] to see realtime Freq. Analysis on playback of your clip with the processing;
             adjust your settings and the curve in the window to counter the frequency range of the noisefloor - this process is like alchemy, wicked awesome
         f. once you're happy with your settings,  click the Save Effects Preset button (down-arrow on hard-drive) next to the Presets pulldown button.
                   do NOT apply your process yet - that's the next step
    3) now, you're going to create the Favorite that the Batch Process will use to process your clips
         a. select Favorites / Start Recording Favorite (every user function of the software is now being recorded into a macro)
         b. in the Noise Reduction UI, click the Load Noise Print button and select your saved file
         c. now, select your preset from the pulldown menu
         d. click the Select Entire File button below the UI Freq. window
         e. click Apply
         f. click Favorites / Stop Recording Favorite
    4) now, under EDIT, select Batch Process
         a. select your new Favorite from the pulldown tab
         b. drag and drop the files into the Batch window or load them from the Load button in the upper left of the Batch window
         c. click the Export Settings button in the bottom left
         d. set any pre/postfix labeling additions (this works a lot like Adobe Bridge's Batch Rename tool - amending the original filename to differentiate
         e. set a NEW save location to isolate the files
         f. set the format / type / bitrate  (best to keep the original format or a higher quality); when finished, click OK
         g. in the lower right corner, click the RUN button and watch the magic right before your eyes
    [HERE IS THE CHEAT]
    Now that you're learned the magic of batch processing (FYI a new favorite can contain / execute multiple existing effect processes), here is what I recently did in a doc with interview footage - guys in front of a green screen with a less than perfect sound environment.
    1) in Multitrack mode, double-click your clip to process
    2) in Waveform mode, select the noisefloor area to sample and type shift-P
    3) type ctrl-shift-P to open the UI - adjust your De-noise settings for ALL of your processing
    4) type ctrl-A to select the entire file
    5) click Apply; type ctrl-shift-S to save this processed file (I add "_PROC") as an alternate to the original which still exists should you want to go back to it easily - the ALT file will be in the multitrack timeline
    6) type G (de-select I/O area) then type F12 key - returns to Multitrack mode
    7) double-click your next clip to process and repeat steps 3-7 until finished (you won't need to tweak the settings in 3 after the initial step 3)
    In 3-5 minutes, you're Done!
    I discovered another layer of coolness within Audition regarding CLIP Effects Racks where one can setup a stack of effects, save as a User Preset, and apply them to either an individual clip, a set of clips, or to a track.  This is great when you want to apply, for example, a Parametric EQ for filtering an outdoor location or boosting a lav mic's High Freq. Shelf for addition sibilance PLUS a Tube-modeled Compressor to handle dynamics...you spend a lot of time tweaking the settings "just right", and now you want to apply to more than one clip on a track.
    In a short film I'm working on, I use this technique to apply EQ and Room Ambiance (reverb) to camera perspective changes on a single track of ADR for off-camera Dx.  I place the Dx in a track. Splice on the camera edits to make unique clips, select the Audio Perspective preset I made for each camera angle, and Voila!
    Have fun!
    -CS

  • How to apply Time Remap to multiple clips simultaneously

    Quite often after trimming many different clips for a wedding video I will then want the majority of them slowed down to a 50% speed. I know how to apply the Time Remap Speed % change in the Motion Tab, but have yet to figure out how to make the change to multiple clips simultaneously.
    Thanks for your help!

    You can apply a speed change from one clip to multiple clips by copying the first one, then pasting attributes (option + V, then select speed from the list) onto as many clips as you have selected.
    Just be aware that this will ripple your timeline by extending all of your clips. FCP keeps the original out point of the source clip, not the out point of each cut on the T/L.
    Tim

  • How to apply basic motion to multiple clips

    Hello!
    How do I apply basic motion parameters to multiple clips? ie Scale, center and crop? Do I have to set the parameters for each specific clip or can I apply the parameters to multiple clips at once?
    Thanks

    I'm going to assume you want to assign the exact same motion tab setting to additional clips.
    Set one of your clips as desired in the motion tab
    highlight the modified clip in the timeline
    type Cmnd-C to copy
    highlight the clips you want to have the setting applied to
    type Option-V to paste
    in the pop-up window uncheck all boxes except Basic Motion
    click the OK button

  • Applying same effect to multiple titles

    sorry for the newbie questions (last video stuff I did was using avid and discreet effect many years ago)
    I've got a load of titles that I want to apply the same effect to (something like a slide direction blur), I've been poking around to see if I can create the effect on a clip, then replace one title with another  OR copy and paste all the clip attributes (including position and transparency) OR create a preset that contains all the effects.
    Ideally the solution would enable me to change the effect and update all the titles.  Is there a way?

    I've got a load of titles that I want to apply the same effect to (something like a slide direction blur), I've been poking around to see if I can create the effect on a clip, then replace one title with another...
    You can do this. Copy the title with the applied effect, paste it elsewhere into the sequence, and then hold down the Alt key as you drag the replacement title on to the pasted title. The effect will be preserved, but the clip will be replaced.
    OR copy and paste all the clip attributes (including position and transparency)
    You can do this, too. Select the clip with the effects in the sequence, either press Ctrl+C or go to Edit > Copy to copy the clip, select one or more target clips, and either press Ctrl+Alt+V or go to Edit > Paste Attributes. All effects and transformations will be pasted to the target clips, without changing the clips themselves.
    OR create a preset that contains all the effects...
    And you can do this, as well. With the Effects Control Panel open, hold down the Ctrl key and click on the names of all the effects you want to include in the preset. Click the flyout menu (it's the tiny four-stack of pancakes at the upper-right corner of the pane) and select Save Preset. I'll let you figure it out from there
    Ideally the solution would enable me to change the effect and update all the titles.  Is there a way?
    No way to directly do this; any effect or effect preset applied to a clip is an independent instance, and is not connected to the original in any way. However, you could use the preset building process I outlined above to semi-quickly update all your titles. If you've applied an effect or effect preset you don't want any more, select all the clips that are thus effected, and right-click on one of them and select Remove Effects. Tick the options that you want to remove. Then, rebuild your preset, and apply it to your clips again; you can apply a preset to multiple clips by selecting them all and dragging the preset from the effects bin. It's a little bit of a round-about way, but it's about the quickest it can get.

  • Applying an Effect to Multiple Clips

    While I have such a helpful person's attention, can you tell me how to apply white balance and other settings (from the Fast Color Corrector) from one to many clips?
    Thanks.

    In CS6, you can also (and possibly preferably) create an adjustment layer, place it over the clips you want the effect on, and than apply the effect to the AL.  This way all clips underneath will get the effect, and you can make changes to just one instance of that effect.

  • How to apply album cover picture to all songs on cd not just one at a time?

    i found agreat website with free cd covers for my songs that will show up in the corner of my ipod. but i can figure out how to apply the picture to all the songs in an alubm an dnot just one, i can only drag the picture into the box in itunes one by one.

    I highly recommend Album Cover Finder
    http://www.amphonicdesigns.com/albumcoverfinder/
    It's not free, but it's worth the small investment of 9 bucks.
    I just point it to my iTunes library and it batch uploads the artwork to every file automatically.

  • How to apply video effects across several clips

    Does anyone know how to apply a video effect across several clips in a sequence, as opposed to doing each clip individually?

    Nest the sequence and apply the effect to the nested sequence.
    You will find links to many free tutorials in the
    Premiere Pro Wiki that will quickly
    show you how things are done in PPro.
    Cheers
    Eddie
    Forum FAQ
    Premiere Pro Wiki
    - Over 250 frequently answered questions
    - Over 100 free tutorials
    - Maintained by editors like
    you

  • How to put effects on multiple linked clips simultaneously

    I want to dynamically link all of the vocal clips at the same time, if possible, from a Premiere Pro CS4 Project to Soundbooth CS4 and "warm" them up a bit in a sort of batch process. Can this be done, kind of like precomposing in AE or using an adjustment layer? They were all recorded in an interview setting and are virtually identical--just two people with same mic, etc.
    Thanks, everyone.

    I am not adding an effect. I am adjusting ONE single effect within multiple clips that have multiple effects. if I just copy and paste it copies ALL the effects, which I do not want, because I have different effects for different clips. i.e. different color schemes etc.
    In otherw ords, I wnat to be able to EDIT effects in multiple clips. E.G, I have added color correction, "looks" filter, etc to multiple clips.  I just want to change ONE of those effects in multiple clips without disturbing the rest of the effects in those clips.

Maybe you are looking for

  • Get Rid of Duplicate Message Copies

    This is not another ' ... receiving multiple copies ...' thread; I managed to do this to myself or, more specifically, to my wife's mailbox. The 'how' part is unclear, and would probably bore everyone to tears; suffice it to say it occurred during a

  • Running OC4J from Jdev 10.1.3

    Hi, I get the following error message: Error initializing server: Unknown deployment root-tag attribute: xmlns:xsi when running my project from the latest version of JDeveloper 10.1.3 Developer Preview. Mukta

  • Clear Cache

    Hi! I need help, i need clear the cache from my application It´s possible? how? Thanks!

  • Would Apple be coming out with a newer version of iWork in future anytime  soon?

    I use iWork at work and head over heels in love. I won't ever we going back to Mircosoft Office. I had a Mac before and it died. I am hoping I can get a new as a birthday present to myself but before I purchase I saw iWork was 2009. Would there happe

  • Restrict data in extractor

    Hi, We want to restrict data within an extractor. For example: in the 0PERSON_ATTR extractor, we want to extract data only for a certain company and we have several companies in our HR instance. We tried using authorizations on the remote batch id bu