How to apply Content server patch

Hi,
How do I apply a Content server patch on Solaris. The Content server installed is 6.40
I followed the OSS Note Note 514500 - Importing Support Packages for the SAP Content Server.
It says Replace the Shared Libraries in the directory "libexec" of your Content Server/Cache Server installation against the files from the ZIP archive.
I do not find libexec directory on Content Server in <sid>csc user and <sid>cs user. Based on this, I have the following questions.
1- Can you please let me know, where can I get this directory libexec.
2- Also please let me know, how can I get the latest patch version of my content server 6.40
3- Can anyone provide me OSS Notes, help URL for Content Server 6.40 on Unix flavour (solaris etc)
Thanks,

Dear Abdul,
It looks like your installation is not complete, please recheck.
1) You will find the libexec in the installation directory of the <sid>cs and <sid>csc folders.
2) I have successfully applied the patch for the same using the SAP Note no: 514500 and its updated successfully.
3) Steps in breif
3.1) Stop the apache server
3.2) Extract the downloaded patch on your local desktop, which extarcts few .so files
3.3) Thru any FTP client (winscp) copy the files on the local desktop to the folde /<sid>cs/libexec folder
3.4) Set the permissions to 755
3.5) Start the Apache server
3.6) Goto CSAdmin on your R3 system and check the version change in the Overview Tab under Version, Build and pVersion sections
Hope this helps
Note 664384 - Generation info for Apache Web server for SAP Content Server
Note 586895 - SAP Content Server for UNIX (composite SAP note)
Regards
Prasad

Similar Messages

  • SAP Content server patches

    I am looking at patching my SAP 6.40 Content server on Windows 2008 R2 in order to do a homogenous system copy. The system uses MAXDB 7.8 as storage. I have two questions, how do I find the patch level of the current content server software. CSADMIN just tells me version 6.40 build 201 pversion 046, is this last number the patch, or is it the server patch entry under the tab statistics . I ask this because if I look in the SWDC the last patch listed is 18 not 046.  If I do need to patch the system do the patches have to be applied in sequence or if 18 is the latest patch can I skip everything up to 18. The notes related to the patches for content server are unspecific on this last point.
    Thank you
    Troy

    Chandu,
    I know what patches are available from SAP, the question was where do you find the Content Server patch level after you install it. Which on playing with the system last night and monitoring the various screens I was able to find after all. In transaction CSADMIN select the content store you want to patch, on the Statistics tab there is an entry, ServerPatch,  this value coincides with the patch level of the content server. The answer as to wether the patches are cumulative or incremental I will find out in a couple of hours as I decided to patch the server under the assumption that patches where cumulative.  I will know after the users test the patches I applied last night.

  • How to install content server

    Hi all,
    I am new to DMS.How to install content server? and What is the difference between Content server and Kpro server?
    Thanks and Regards,
    Vairavan

    Hi Vairavan
    try SAP Service Marketplace at service.sap.com/contentserver and
    try the Installation Guides at service.sap.com/instguides -> SAP NetWeaver -> SAP NetWeaver 7.0 (2004s) -> Installation -> Installation u2013 Standaline Engines.
    regards, Andreas R

  • How can apply Oracle BPEL patch to Oracle BPEL Process manager??

    Hi, Gurus:
    I am new to Oracle BPEL Process manager, I successfully install Oracle BPEL Process manager, but I need to install Oracle BPEL patch and the examples within it.
    so I download bpelpatches.zip, it has over 106 MB.
    It contains:
    1. p4369818_101200_GENERIC.zip
    2. p4343748_101200_GENERIC.zip
    3. p4406640_101200_GENERIC_Patch01.zip
    4. p4469111_101200_GENERIC_Patch02.zip
    I am using window XP, how Can I apply these patches to my system??
    How can apply Oracle BPEL patch to Oracle BPEL Process manager??
    Thanks a lot!!
    Charlie

    don't see any invoke in your client against the intiate operation.. - which creates the correlation
    only 2 of them
    <invoke name="Invoke_1" partnerLink="PartnerLink_1" portType="ns1:CorrelatedBPELProcess" operation="receive1" inputVariable="Invoke_1_receive1_InputVariable"/>
    <invoke name="Invoke_2" partnerLink="PartnerLink_1" portType="ns1:CorrelatedBPELProcess" operation="receive2" inputVariable="Invoke_2_receive2_InputVariable"/>
    compared to this def of the process
    <portType name="CorrelatedBPELProcess">
    <operation name="initiate">
    <input message="client:CorrelatedBPELProcessRequestMessage"/>
    </operation>
    <operation name="receive1">
    <input message="client:CorrelatedBPELProcessRequestMessage"/>
    </operation>
    <operation name="receive2">
    <input message="client:CorrelatedBPELProcessRequestMessage"/>
    </operation>
    </portType>

  • How to configure Content server with Oracle Portal

    I am working on oracle portal using JDeveloper 11.1.1.5.0. I need to configure Content server to work with UCM. Which content server version should i use and what basic steps required to configure it.
    OS environment is Windows XP SP3.
    Database server is Oracle 10gR2

    Hi
    "I need to configure Content server to work with UCM." - I am not clear on this .
    UCM is content server .
    Now if you are looking to have UCM contents rendered on Oracle Portal then you will need to use Content Portlet Suite .
    Hope this helps .
    Thanks
    Srinath

  • Webutil not working properly after applying application server patch

    i have applied patch Patch 5983622 my application server verion is upgrade to 10.1.2.3 .
    patch is applied sucessfully but.foms which have webutil library not working.
    can any one tell me what should i do for make them working again.

    Do you receive any error messages in your Java Console?
    We encountered to following problem when we patched the AS to 10.1.2.3:
    [Exception while using WebUtil on OAS 10.1.2.3|http://www.it-eye.nl/weblog/2008/07/04/exception-while-using-webutil-on-oas-10123/]

  • How to apply CPU patch

    Hi...guys...
    I want to apply the CPU patch for 2-NODE RAC Database..
    Actually I never applied patches..plz can any one guide me how to apply the CPU patches for RAC...
    As per as my knowledge..
    1.apply the patch for clusterware.
    2.apply the patch for database level...
    is its right...
    Another thing is how to upgrade the 10.2.0.2 to 10.2.0.4 for RAC ...
    plz help me..

    Hi,
    you are right, clusterware always has to be on the same or higher patchlevel as/than the database so you will patch it first. Generally, the hardest part is finding the patch on metalink, once you have found it, there is a readme with every patch that has very detailed instructions on what to do. For CPUs and other patches, you will generally bring down services on one node, then run opatch on that node. Once it is done patching, it will tell you to restart all services on that first node and shut down services on the other node(s). Once you hit OK opatch will continue to patch the remote hosts.
    The upgrade to 10.2.0.4 will be a bit more complicated. AFAIR there is a real installer with that one and once you are done patching the software you also have to patch the database itself which means downtime.
    Bjoern

  • How to apply the Patchset 7 to Forms 6i

    Hi all !!!
    I need install the PatchSet 7 in the iAS Server 1.0.2.2.2 (concrectly at the Forms Server Service).
    I had stopped all services of Oracle, and had applied the patch. But the services of Forms and Reports is missing after.
    Any idea.
    How to appplies the patch?
    Thanks and best regards.
    Carlos Hernandez
    Barcelona (Spain)

    848478 wrote:
    How to apply the latest patch set for all the Installed Modules in 11.5.10.2 along with the Roll up's if any.https://forums.oracle.com/forums/search.jspa?threadID=&q=Latest+AND+Patchsets&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=Latest+AND+Patches&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • OS Upgrade on Content Server

    Hi,
    We are using Content Server 6.30 Installed on Linux 3EL, DMS Installed on ECC6 system.
    We are using StorageType=FSS(File System Storage) on Content Server.
    Now We are planning to Upgrade OS on Content Server.
    Now Issue is I searched in PAM for suitable OS for our current content server but there I found for MAXdb and SAP db but not for storage type FSS.
    Please suggest for which OS release we should go for our Content Server OS Upgrade and do we need to do anything after Upgrade for our storage(FSS) after Upgrade.
    Please suggest.
    Regards,
    Shivam

    Hi Shivam,
    you just need to make sure that your operating system version that you want to upgrade to is supported for the version of Content Server that you are using.
    You don't have to do anything from the file system side after the upgrade.
    I'd also recommend that you use the latest version of the Content Server - version 6.40. As you have an existing version; you just need to install the latest content server patches to upgrade to this 6.40 version of the Content Server.
    KR,
    Karen.

  • SAPu2019s content server (DMS) and EDMS with ECC 5.0

    Hi all,
    I am in the process of setting up SAPu2019s content server (DMS) and would really appreciate some insights as what version I should be installing.
    We are currently running ECC 5.0 (640).
    I am also interested in utilizing the Easy DMS functionality and would also really appreciate some insight on that as well (version etc).
    Please advise?
    Regards,
    Iqbal

    Hi Iqbal,
    unfortunately I'm not a Content Server expert. From DMS point of view I would recommend you to use always the latest Content Server patch level (see SAP note 514500). For the decision on the content server I would recommend you to contact your local consulting organisation which will support you in finding the right content server for your business requirements.
    Regarding EasyDMS and the version you should use I can provide you the following suggestion. General there are currently three versions of EasyDMS which are 6.0, 7.0 and 7.1.
    If you would like to run EasyDMS on Windows 7 PCs too, then you have to use version 7.1 because only this version supports Windows 7. Otherwise I would recommend you to run the latest patch level of verison 7.0
    Further I can recommend you to read through the following notes which provide useful information on EasyDMS:
    990018 - EasyDMS 6.0 Restriction Note
    903827 - FAQ for Easy DMS 6.0
    1273919 - SAP Easy Document Management 7.0 Restriction Note
    1276709 - SAP Easy Document Management 7.0 FAQ Note
    1467697 - SAP Easy Document Management 7.1 Restriction Note
    1465763 - SAP Easy Document Management 7.1 FAQ Note
    Best regards,
    Christoph

  • HTTP Server Patch - 4393827 for Oracle EBS 11i

    Hi,
    Our env is Oracle EBS 11i (11.5.10) + CU2 +ATG RUP6. We are currently on 9.2.0.8.0
    I am currently applying Minimum Baseline Patches for extended support - +Patch Requirements for Extended Support of Oracle E-Business Suite Release 11.5.10 [ID 883202.1]+.
    For the HTTP Server Patch - 4393827 do I need to apply patches for all the below components? It prompted me 4 times to apply the patch for each component.
    OHS_1.0.2.2 component
    MODPLSQL component
    Webcache_1.0.2.2
    DB_8.1.7.4
    Rgds,
    Thiru

    Thanks.
    I applied HTTP Server Patch - 4393827 in my upgraded instance 11.5.10 CU2ATG RUP6.
    Now the Apache version is:
    Server version: Oracle HTTP Server Powered by Apache/1.3.19 (Win32)
    Server built:   Jun 14 2005 15:26:57 (iAS 1.0.2.2.2 rollup 5)
    While applying HTTP Server Patch - 4393827, I was prompted to enter Y or N to apply patch for the following components individually. I had the option to enter N also.
    OHS_1.0.2.2 component
    MODPLSQL component
    Webcache_1.0.2.2 component
    DB_8.1.7.4 component
    I entered Y(Yes) for all the components and the patching was successful for all the components.
    I am doubtful about the DB_8.1.7.4 component patch. Should I say Y to this also?. Since my Instance is on 9.2.0.8.0 is it required to apply this component (DB_8.1.7.4 component) also?
    Rgds,
    Thiru

  • Content server for Portal.

    Hallo, experts!
    Could you please tell where can I find  any information how to make content server work with bi documents that are placed on the portal.  on may be some steps to do this?
    Thanks!

    Portal atached to ABAP system. this system is using Content server for keeping the documents
    You can work with that repository as long as you are using the portal as a frontend for the backend system but not to store content created in the portal itself.
    my wish is to put document in content server, after I created it in portal
    Then I think KM is what you are looking for as mentioned by Markus.
    Regards
    Juan

  • KM Content Server

    Hi
    I m new to KM. Now i need to configure KM&TREX in my organization
    for KM they r going to get content server.
    1. How to install content server.
    2. once v installed content server Do we need to install any other things at content server>
    V will place all documents in content server
    3. Do we need to follow any structure to place files at content server?
    4. What of repository file need to create at portal to access content server?
    5. do v need any integration between portal server n content server?
    kindly solve my quetionns
    thanks & regards
    Venkat

    Hi Venkat,
    here is an installation guide for content server:
    [https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/400a0694-0701-0010-3a8f-c1a9b6afc3fa]
    [https://websmp207.sap-ag.de/installnw70] -> Standalone Engines -> Installation Content Server 6.40 on Unix/Windows
    Best regards,
    Denis

  • Content Server & Knowledge Management

    Hi,
    I am new to the concept of content server & Knowledge management in CRM.
    Cotent server is already installed and I want to configure content server in CRM 7.0. I found some documents on service.sap.com but that describes the configuration of knowledge management.
    Can you guys , please let me know, how to configure content server in CRM or any links describing the same would be really helpful.
    Thanks,
    Manoj

    Hi Manoj,
    When we are talking about content server & Knowledge management , we generally mean the TREX engine of KM.
    As we know KM is a component of SAP Netweaveru2122. It is used for managing unstructured information.Search and Classification (TREX) allows you to configure secure communication between TREX and the application using TREX (for example, SAP Enterprise Portalor SAP Customer Relationship Management).
    Hence we configure secure communication between TREX and the application using it (for example, SAP Enterprise Portal or SAP Customer Relationship Management.For achieving the same as u said once installation is done we take HTTPS connectivity or any other depending on client request. TREX is based on a client/server architecture.
    http://help.sap.com/saphelp_nw04/helpdata/en/82/0034012008cd41a96d9968c0e8e845/content.htm
    https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=741535
    Please check the above links.
    Good Luck!
    Regards,
    Shaila.

  • SAP DMS and Content server installation.

    Hi,
    I am new in DMS. i have done configuration of DMS . now i want to store document on Content server.
    so how to install content server on windows server 2003.
    How to connect DMS and content sever?
    How to access document ?
    please help.
    Thanks,
    Dipak.

    Hi Ricardo,
    1. By using T-code DC10-Document type creation:- you will create Document type first.
    a. create document type
    b. define status if you need.
    c. Object Linking- if you want document attach to SAP object then you need to configure by using same T-codeDC10.
    and please go through below link:
    http://help.sap.com/printdocu/core/print46c/en/data/pdf/CADMS/CADMS.pdf
    2. You want to Store document into SAP database/file system/SAP Content Server.
    a. you need to decide first where you will store document.
    suppose you select store into SAP Content Server then you need to select KPRO check-box in DC10. then you need to create Content repository by using OAC0 tcode an create storage Category in OACT transaction.
    b. suppose you want to store into File system then you need to configure Data Carrier in DC20 T-Code.
    c. if you want to store SAP Database then also you need to Content repository  same like SAP content Server in OAC0 tcode and select storage type as SAP DATABASE.
    and then create storage category.
    if you have any query please let me know
    Thanks,
    Dipak.

Maybe you are looking for