How to apply different styels to different variable in the same window

Dear experts
can any one tell me how to print to different variable with different smartstyle in the same window in Smartforms
thanks in advance

Not possible to switch dynamically a smartstyle inside a text. A workaround is to use a SAPscript style (SE72) and switch to it with the following control command inside the text. To come back to the original smartstyle within the same text (if you need it) I think you may use style name *.
/: STYLE <stylename>
(please search SDN if you need more information)

Similar Messages

  • HT204053 i need to know how to separate different devices on the same itunes account

    I need to kow how to seperate different devices on the same itunes account

    Each of you should have their own iCloud account  which could be set up in "Settings > iCloud" (and if you asking me also for iMessage and FaceTime), but you could still use the same Apple ID for iTunes and App Store purchases which could be set up in "Settings > iTunes & App Stores" so that you only have to purchase each app or other media once.

  • How can I make my computer restart with all the same windows that were open when a shut it down?

    How can I make my computer restart with all the same windows that were open when a shut it down?

    That is the way Mac OS X 10.8 (aka Mountain Lion) works by default. Are you actually running that system? (See About This Mac in the Apple menu.) If so, make sure the check box in the shut down alert is checked:

  • How to sum different column in the same table

    Hi everyone
    I would like to know how can I make the sum of different column in the same table using apex
    exple:
    TR_PROJ_BIL_TRIM.ENTPIDFISC as ENTPIDFISC,
        TR_PROJ_BIL_TRIM.EXEANNEE as EXEANNEE,
        TR_PROJ_BIL_TRIM.PROJBILTRIMT1PREV as PROJBILTRIMT1PREV,
        TR_PROJ_BIL_TRIM.PROJBILTRIMT2PREV as PROJBILTRIMT2PREV,
        trunc( TR_PROJ_BIL_TRIM.PROJBILTRIMT1PREV)+(TR_PROJ_BIL_TRIM.PROJBILTRIMT2PREV)
    from TR_PROJ_BIL_TRIM TR_PROJ_BIL_TRIM
    group by TR_PROJ_BIL_TRIM.ENTPIDFISC,TR_PROJ_BIL_TRIM.EXEANNEE
    but while trying to run this script i get this error message:"ORA-00979: not a GROUP BY expression"
    thanks for reading me and I hope to hear from you soon

    Hi,
    Your question do not have anything do with APEX.
    It is pure SQL question and you will get better answer this kind questions from SQL and PL/SQL forum
    You need have GROUP BY when you use aggregate functions like SUM.
    I assume you like just add two columns.
    Try
    SELECT ENTPIDFISC
        ,EXEANNEE
        ,PROJBILTRIMT1PREV
        ,PROJBILTRIMT2PREV
        ,trunc(PROJBILTRIMT1PREV) + (PROJBILTRIMT2PREV)
    FROM TR_PROJ_BIL_TRIM
    Regards,
    Jari

  • Versioned deployments: how to deploy different version of the same app ?

    I 'd like to deploy on a server (single instance) different versions of the same web application, say:
    webapp1.war
    webapp2.war
    webapp3.war
    The wars have the same ContextRoot.
    It is possible to version them with an attribute in MANIFEST.MF, but is it possible to have the N applications ACTIVE and running ? I'd like that one IP will be served from webapp1, another IP from webapp2, another IP from webapp3, etc.

    It may your 'requirement' but I have serious doubts that the app review team will approve it. Save yourself the waste of time and follow my original suggestion of one app. That's the only correct 'method' (w/IAP of course) that will have a chance of success.
    See the iOS Human Interface Guidelines and the App Review Guidelines before you go any further. In the case where you need 'official' guidance, consider using support event w/DTS

  • How do I get IE 11 to open in the same window on the task bar?

    How do I get IE 11 to open in the same spot on my task bar.  i.e. IE 11 is on my task bar. When I open it, it opens in a new place on the end of the task bar.  Microsoft Outlook, Windows Explorer, Quicken, Adobe, etc,, all on the task bar open
    right at there location on the task bar; not in a new place at the end of the task bar.
    How do I get IE 11, Windows 7, 64 bit to open at the same place as the IE icon???
    Thanks

    Hi,
    Seems a strange issue, How about un-pin IE from the taskbar, then re-pin it to the taskbar for a test?
    If doesn't work, I suggest you turn off IE 11 in "Turn Windows Features on or off", reboot PC, then re-turn on, check the result again.
    Regards
    Yolanda Zhu
    TechNet Community Support

  • Applying different template to the same item for different organizations

    Hi I'm having an issue with an item load.
    We are trying to load a list of items using the item import.
    3 orgs
    1: mas
    2: first
    3: second
    say in the new list that we are importing there is an item "100A" (mtl_system_items_b.segment1)
    This item already exists in the mtl_system_items_b as a master item (ie assigned to the master org) it has template "STOCK ITEM"
    and is also attached to the first org
    I want to create the same item as a nonstock for the Second org
    Can this be done?
    When i tried to do the import it failed giving me a INV_IOI_MASTER_CHILD_1A error (Master - Child Conflict in one of these Attributes: Default Buyer(BUYER_ID), Accounting Rule(ACCOUNTING_RULE_ID), Invoicing Rule(INVOICING_RULE_ID), Purchased(PURCHASING_ITEM_FLAG), Shippable(SHIPPABLE_ITEM_FLAG), Customer Ordered(CUSTOMER_ORDER_FLAG), Internal Ordered(INTERNAL_ORDER_FLAG), Inventory Item(INVENTORY_ITEM_FLAG))
    Any ideas on how to do this?
    Thanks
    D

    Hi Sandeep
    Thanks a lot for the reply
    In our MASter org setup, the Template "T1" is a STOCK_ITEM template and it has the stockable attribute set at the org level.
    This item is also assigned to ORG1 as a T1 STOCK_ITEM.
    So can we create the same item using "T2 which is a NON_STOCK Template in org2 ?
    If yes then that means I just have to create a record in the MTL_SYSTEM_ITEMS_INTERFACE only for the child org2.My concern is I read somewhere that
    the item import tries to match the attributes of the child org to the master org attribute(for attributes controlled at master org i think).
    And since the attributes for a nonstock are different than those for a STOCK wouldn't that create a problem?
    Thanks
    D

  • How to make different size images the same size pdf in Acrobat.

    I am trying to place 2 different size images into acrobat to create a pdf but one image is half the size. How do i make each page the same size when the images are different sizes?

    Thank you, I changed the image size to match and then placed them in acrobat.

  • How to config. different Operations of the same Interface to different BPM

    Hi Gurus
       I have a very urgent problem.
       The requirement is like this:
       Customer creates an invoice in A1S and release it. Information of the invoice is retrieved via two service interfaces:
            CustomerInvoiceProcessingInvoiceAccountingOut
            CustomerInvoiceProcessingReceivablesPayablesOut
            with operation NotifyOfInvoice;
       These two interfaces will transfer the information into XI and the information will be filled into a BAPI, BAPI_ACC_DOCUMENT_A1S, to R3. Then the finacial document together with the invoice will be created in the R3.
       when customer cancels the invoice in A1S, Information of the cancellation is retrieved via the same two service interfaces:
            CustomerInvoiceProcessingInvoiceAccountingOut
            CustomerInvoiceProcessingReceivablesPayablesOut
            with operation NotifyOfInvoiceCancellation;
       These two interfaces will transfer the information into XI and the information will be filled into a BAPI, BAPI_ACC_DOCUMENT_REV_POST, to R3. Then the reverse finacial document will be created in R3.
        My solution is like this:
        1. for invoice creation:
         Both messages sent to BPM_1, then send to R3.  3 interface determinations are needed for 3 abstract interfaces.
        2. for invoice cancellation:
         Both messages sent to BPM_2, then send to R3. 3 interface determinations are needed for 3 abstract interfaces.
        My problem is this:
        No matter during creation or cancellation, the same interfaces are triggered. The related receiver determination will distribute the information to both of two BPMs. However the information only contains data of one operaton: creation or cancellation. Error messages will appear in monitor for the other BPM. For example, when customer creates an invoice, the information only contains data of creation whereas it is sent to two BPMs via the receiver determination. the BPM for cancellation surely can not deal with this information then error appears.
        My question is : how can i solve the problem? How can i avoid the appearance of the error? thanks
    Message was edited by:
            SAP LCR

    Hi,
    In the receiver determination you can route the message to the RIGHT BPM according to the content of the payload. So each time only one BPM is called.
    Regards,
    Hui

  • TA38325 how can two different actions have the same shortcut!?

    deleting the master and deleting a version can be both achieved by command-delete (this is how its shown in the apple support documents!). HOW is that possible. How is the system suppose to realize which of the two options I have in mind?

    The document cited -- TA38325 -- is wrong (afaict).  There is no shortcut for "File➞Delete Original Image and All Versions".  You can confirm this by checking the shortcuts listed on your File menu, as well as by searching the Commands dialog for "delete".
    The article has been archived (it will not be updated).  As it was updated fairly recently (Feb 2012), it would be good if you'd file a report with Apple via "Aperture➞Provide Aperture Feedback"
    Good catch, though.
    (Screenshot)

  • How to create different users in the same iPad 4?

    I would like to share my new iPad with other person. How can I create two users.?

    The iPad does not support multiple user accounts.

  • EP5: move to a different page in the same window

    Hello All,
    I have a button with the following code:
    onClientClick="javascript:openUrl('"myMazminBean.getNewVisitURL()"');";
    the NewVisitURL directs to an iview and is created using the URL Generator. the openURL function on the jsp page is defined as follows:
    <script>  
    function openUrl(url)
             window.location.href = url;     
    </script>       
    What I am trying to do is to replace my current iview with the iview in the URL. It actually works, but only on the second time I press the button. The first time I just get a refresh of the exact page I was viewing.
    If I look at the source of the html (via Explorer - view Source) , it looks completely different: before I press the button for the first time, the source is very long and contains millions of functions; after I press the button one time (which appears to do nothing but refresh) I get a much smaller source that contains mainly the current Iview.
    Any ideas?
    Thanks,
    Yoni

    Hello All,
    I have a button with the following code:
    onClientClick="javascript:openUrl('"myMazminBean.getNewVisitURL()"');";
    the NewVisitURL directs to an iview and is created using the URL Generator. the openURL function on the jsp page is defined as follows:
    <script>  
    function openUrl(url)
             window.location.href = url;     
    </script>       
    What I am trying to do is to replace my current iview with the iview in the URL. It actually works, but only on the second time I press the button. The first time I just get a refresh of the exact page I was viewing.
    If I look at the source of the html (via Explorer - view Source) , it looks completely different: before I press the button for the first time, the source is very long and contains millions of functions; after I press the button one time (which appears to do nothing but refresh) I get a much smaller source that contains mainly the current Iview.
    Any ideas?
    Thanks,
    Yoni

  • Read action from a different view in the same window

    Hi all,
    I have a view which contains a ViewContainerUIElement and a ButtonRow. A second view with form fields is embedded in the container of the first view. Validation of the form fields in the second view depends on the button pressed in the first view. How can I determine in the second view, the name of the action that is executed in the initial view?
    Thanks and regards,
    Patrick

    Patrick - I answer this question in a previous forum [Close a popup of another view being on the Main View;
    If you used the wizard in order to create the popup the wizard create a button "OK" that I'm guessing you change to "SAVE", you will need to create an EVENT HANDLER under your method list tab in my example my EVENT HANDLER is "SEARCH_RESULT" once the user click the "OK" button it will call SEARH_RESULT event and it will do your code inside the event.
      DATA LO_WINDOW_MANAGER TYPE REF TO IF_WD_WINDOW_MANAGER.
      DATA LO_API_COMPONENT  TYPE REF TO IF_WD_COMPONENT.
      DATA LO_WINDOW         TYPE REF TO IF_WD_WINDOW.
      data LO_VIEW_C         type REF TO if_wd_view_controller.
      lo_view_c = WD_this->wd_get_api( ).
      LO_API_COMPONENT  = WD_COMP_CONTROLLER->WD_GET_API( ).
      LO_WINDOW_MANAGER = LO_API_COMPONENT->GET_WINDOW_MANAGER( ).
      LO_WINDOW         = LO_WINDOW_MANAGER->CREATE_WINDOW(
                         WINDOW_NAME            = 'SEARCH_POPUP_WIN'
      *                  title                  =
      *                  close_in_any_case      = abap_true
                         MESSAGE_DISPLAY_MODE   = IF_WD_WINDOW=>CO_MSG_DISPLAY_MODE_SELECTED
      *                  close_button           = abap_true
                         BUTTON_KIND            = IF_WD_WINDOW=>CO_BUTTONS_OK
                         MESSAGE_TYPE           = IF_WD_WINDOW=>CO_MSG_TYPE_NONE
                         DEFAULT_BUTTON         = IF_WD_WINDOW=>CO_BUTTON_OK
    lo_window->subscribe_to_button_event( button = IF_WD_WINDOW=>CO_BUTTON_OK
      action_name = 'SEARCH_RESULT'
      action_view = lo_view_c
      is_default_button = ABAP_true ).
    *  lr_popup->open( ).
      LO_WINDOW->OPEN( ).
    the subscribe_to_button_event will call the event handler and it will trigger your code inside the event.
    Thanks
    Jason P-V

  • How to print text in English & chinese lang in the same window in smartform

    Hi All,
    My requirement is in the Smartform for few windows i need the text in the English Language as well as corresponding Text in chinese Language.
    For Eg                               Buyer:                         
                                             需方：                         
                                            Address                         
                                            地址：                         
                                            Contact:                         
                                            联系人：                         
                                           Tel:                                     Fax:          
                                           电话：                                                  传真          
                   I need only the corresponding  Labels to be converted to  the chinese language.  Please let me know how this can be done.
    Thank you.

    Hi Vasudha,
    You maintain the English & chinese text in different standard text using SO10 in different languages.
    Then include these texts in your smart forms.
    The  process to include these texts :
    Right click on the node=>create=>text=>choose the type as Include text.
    Text Name         <The standard text created in SO10>
    Text Object       TEXT
    Text ID           ST
    Language          <Language>
    Regards
    DKS

  • How do I set Firefox to open items in the same window instead of a new tab or window?

    I want to be able to open items (such as click on the results of a search) and not have it open in a new tab or window, just open in the same window (as the search results).

    See:
    *http://kb.mozillazine.org/browser.link.open_newwindow
    *1: current tab; 2:new window; 3:new tab;
    For links opened via JavaScript you can look at this pref:
    *http://kb.mozillazine.org/browser.link.open_newwindow.restriction
    You can open the <b>about:config</b> page via the location/address bar.
    You can accept the warning and click "I'll be careful" to continue.
    *http://kb.mozillazine.org/about:config

Maybe you are looking for