How to apply exactly the same black band, to exactly the same part of the page, to 100 pages?

Hi there,
The more I refine my project, the more I tweak elements that, when I first created a Master Page, I didn't worry about enough.  So now, for example, I've created just the right size black band to be the background for each and every page (in the recipe part of my book), and I'd like to put it on each of these pages just like this:
X:  8.4399
Y:  -0.125
W:  17.7198
H:  1.5306
As I've been working on my book, it usually seems that when I copy something from one page to another, I have to shift its positionthis way and that.  Is there a technique I can use so that when I apply this new/improved black band to each page, it will be placed in exactly the same place everywhere?
I realize that I can go to each page and paste in the black band and then enter the X, Y, W and H listed above... but that's going to take me such a long time (and give me carpal tunnel).  This app is so smart, I'm thinking there must be a better way.
If someone knows it, I'd really appreciate learning it.
Thanks,
Malcolm

Get it positioned as desired on one page.
With it still selected > Edit > Cut.
Go to your master page.
Edit > Paste in Place.
You may have to reapply your master, depending on what else has transpired since it was set up. Then it will appear on every page to which the master is applied.
If it is best positioned "in the back" (it sounds as though that might be the case), you can paste it on a new layer and drag that layer to the bottom of the stack.

Similar Messages

  • I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

    I made a video in imovie and saved it, now i want to carry on making it from where i left but every time i try to add an image onto the end it just goes tot he wrong part of the movie, how do i just add it onto the end?

    Have you seen my User Tipp here
    "Movie Magic" with Stills and Dissolve
    When you 'prep' your stills in any 'picture app', you can do a lot of marvel by simply applying dissolves.
    In your case, I would create a white document (in Pixelmator, Keynote, Photshop, online at pixlr.com, whatever ...) and another with your logo (and further more ones with additional logos). Drag the jpgs into your iMovie Project and apply dissolves  - tadahh! - logos appear on white.

  • I downloaded an app off the store which said it was free and part of the 5 year promotion. I've been charged for the app by the store. I don't want the app and there's no one to speak to about it. Who can I call and how can I get the app off my phone?

    I downloaded an app off the store which said it was free and part of the 5 year promotion.
    I've been charged for the app by the store. I don't want the app and there's no one to speak to about it.
    Who can I call?
    How can I get the app off my phone?
    How do I get my money back from something I wouldn't have ordered?

    You cannot call anyone.  You contact them as everyone else does:  http://www.apple.com/support/itunes/contact/
    You delete the app as you do any other app.  Hold an icon until they wiggle.  Tap the "x".  This is covered in the manual.

  • When I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

    when I go on a song on my music on my iPod touch 4th gen I can no longer get the bar across the top of the screen which allows you to change which part of the song you are up to, how do I get it back?

    hello, please install the search reset addon - it will revert the most common customizations those adware programs do in firefox back to the default: https://addons.mozilla.org/firefox/addon/searchreset/

  • Trying to turn the background black and white in lightroom 5. Using the adjustment brush. It isn't working.

    Trying to turn the background black and white in lightroom 5. Using the adjustment brush. It isn't working.

    Set Flow and Density of the brush to 100
    Reduce it where you want the effect to blend.
    Bruce

  • Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Is there a way to place markers in a multicam clip, and then have those same markers carry over when you select part of the clip for a project (or various projects)?

    Thanks. Beforehand, I was double clicking on the multicam clip and forced to make a marker on either the Cam A or B. I realize now that I can do it in the Event Browser. THANK YOU.
    Considering I may create >20 markers per clips for around 10 different interviews, I wish there was a way to bring the Event Brower to the bottom half of the FCPX windows, to resemble the screen orientation when I'm working in an actual project (one could do this in iMovie), and this way the markers could be listed to the left without having all the other event clips around it. Is that clear? Is that possible?

  • I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?

    Hi An Iphone user,
    If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
    How do I delete a message?
    To delete a message, tap and hold the message bubble, then tap More.
    Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
    After you delete a message, you can recover it only by restoring from a backup.
    Send messages with your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    - Brenden

  • Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

    Hi all,
    I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
    I am having a variable named filename and archivefilename and two fileconnections  one is originalfiles and archivefiles
    archivefilename=replace( @[User::filename],"datafiles","archive")
    orginalfiles connection is an expression =@user:filename
    archivefies connection is an expression=@user:archivefilename
    the filename comes from reading the folder that contains those files
    public void Main()
                string[] filenames;
                filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
                Array.Sort(filenames);
                Dts.Variables["filelist"].Value = filenames;
                Dts.TaskResult = (int)ScriptResults.Success;
    The folder c:\luminis\archive\ exists
    why I am getting this error
    My filesystem task : destinationpathvariable =false
    destinationconnection:archivefile
    overwrite=true
    operation=movefile
    issourcepathvariable=false
    sourceconnection=original file
    why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
    sohairzaki

    there may be 2 problem...
    1> specify a target directory only, not with the file name. 
    OR
    2> Try using the unc,path format \\computername\sharename\
    let us know your observation...
    Let us TRY this | Mail me
    My Blog :: http://quest4gen.blogspot.com/

  • IN Premiere Pro CC how can I group copy all files in time line to another part of the time line

    How can I group copy all files from one part of the timeline to another part

    From the Premiere Pro manual (I believe track targeting matters, too.  That is, the targeted tracks only are copied): 
    Copy command enhanced to operate on a range in a sequence
    The existing Copy command (Edit > Copy, Ctrl+C (Windows), Command+C (Mac OS)) is enhanced when used in the Timeline panel. If there are no clips or keyframes selected, and an In Point or Out Point is set, then the range of time between the In point and Out point is copied to the clipboard.

  • Restricting the File adapter to pick up only a part of the payload

    Hi ,
    I have a csv file like below,
    $H$,Header1, xyz, xyz
    $H$,Header2, xyz, xyz
    $H$,Header3, xyz, xyz
    $D$,Detail1,xyz,xyz
    $D$,Detail2,xyz,xyz
    $D$,Detail3,xyz,xyz
    Header and Details links have no link to each other!!! I just wanted to check if at all it is possible for the file adapter to skip the header llines and take only the detail lines.
    Does this require any tweaking in the nxsd that is generated??
    Any light on this would help... :)

    Hi Anuradha,
      Could you please kindly provide answers to the queries below so that forum members can have a clear picture of your requirement
    1. What is the operating system of your PI server?
    2. What is the version of PI you are working on?
    3. What exactly do you mean by statement " I want the adapter to pick only one file at a time rather than picking all the available files in the system."  since adapter will actually pick up files one by one only in each polling interval. This goes in PI pipeline
    one after another in quick succession.
    4. Do you mean that you want to insert delays between successive file pick up then Baskar has already answered your question.
    5. Do you want the channel to pick up only one file in a day out of all possible file?
    6. Could you please kindly provide any sample file name you are receiving in PI ?
    regards
    Anupam

  • The Adobe site says that Bridge CS6 is part of the Creative Cloud

    It is not listed under the downloadable apps.  How do I download it as part of the Creative Cloud purchase?

    Install a desktop application such as Photoshop or InDesign and Bridge will be installed.

  • If I no longer have the old application Backup installed on my Mac (part of the .Mac subscription), do I still need the folder called Backup, that is in my Library in the Application Support folder?

    If I no longer have the old application Backup installed on my Mac (for performing scheduled backups of data on the computer), do I need the folder called Backup, that is in my Hard Drive, to Library, to the Application Support folder?  (There is no Backup folder in my Home Folder, to Library, to the Application Support folder.) 
    Backup was part of the .Mac subscription I used to have, and I have not used it since I gave up being a .Mac subscriber many years ago.  In fact I recall Apple saying at one point that they no longer supported the Backup Application.  I assume the Backup folder is just remnants from when I used to have that application, however I could be wrong, and don't want to trash the folder unwisely.
    As I looked through the various items in the Backup folder, nothing appears to be modified since 2007, which further confirms that this folder is from long ago when I used to have that application.  I did notice that the main Backup folder itself was the only thing that had a more current modification date on it.  That date coincides with the date that I installed Snow Leopard on my Mac earlier this year.  But I'm assuming that any operating system software installation will place a modification date on all the various folders of one's computer, with the date the new OS was installed.
    Any insight will be appreciated!  Thank you!

    Since it has always been very basic to backup your computer and all it's data, Apple provides no way for you to transfer music from your iPhone back to your computer.  As you know, you can re-download all iTunes purchases, but music that you ripped yourself you'll have to just re-rip again.
    You can try and find 3rd party applications that might help you.  I'm sure you'll pay, however.
    Let this be a very important lesson learned.
    Best.

  • How to apply deactivate property to a number of objects of same type

    Hello,
    I have 10 combination field boxes in my VI. I want to disable these combinations field when I run this VI. I know how to do it using property node but only for one obect. If I do this way I have to use 10 property nodes to disable all the field boxes. Is there any to use only one property node to disable all these combination boxes.
    thanks in advance.
    Solved!
    Go to Solution.

    You need to make reference for every control then build them all under one array. Give this array to property node using for loop. 
    Find out vi in attachment for reference. 
    CLAD
    Passionate for LabVIEW
    Attachments:
    Disable all at once..vi ‏10 KB

  • What is the thin black wire in Pavilion M9000 that connects to the power on/off button

    I am changing the power supply in the m9000 and this thin black wire appears to connect to different circuit boards. It is broken in several places and I am not sure on how to reconnect.

    Hello granpoobah,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are inquiring about the wire connecting your on/off button to your motherboard on your HP Pavilion Elite m9000 Desktop PC. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Business PCs - Compaq, Elite, Pro.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • How do install EPC header on the ASR router? or is it now part of the IOS?

    There was a discussion of using the router to look at the trace capture from the router, I downloaded the EPC header, but don't know to install.  Is there any documentation on how to install the script file onto the ASR router?  Thank you
    Osh

    Which script is this exactly?

Maybe you are looking for

  • I can't get to BIOS if internal HD is plugged in

    W520 running BIOS version 1.35 If I remove the hard drive, I can get into the BIOS just fine (I am talking about the internal HD, Intel 320).   I wanted to change the boot order.  However it makes no difference once I reconnect the hard drive, it wan

  • Display Blocked BPs-Can we see all detailed analyses in a one step process?

    Hi Before releasing any BPs blocked by the system our compliance users check the details of the blocks. Currently it is a 2 step process (after they are in the detailed screen of the Display Blocked Business Partners menu): 1 u2013 Double click on th

  • Multiple producer one consumer

    Greetings, I am developing an application where data are obtained at different rates and different processes, but I want to store in one file, store this data as I can if I have multiple producers and one consumer?? Solved! Go to Solution.

  • How to make formfield to clear after user submits data

    We created a form where a staff person responsible for hiring can enter a new employee's information and then distribute the information to colleagues who need to prepare various info for the new person's arrival. Sending out the same form to multipl

  • Exported JPG Versions too small

    Exported "original size JPGs" from Raw Masters. The file size I was expecting was between 3 and 5 MB but they come out 350kb more or less. If I choose double HD they come out around 1mb... Any idea why this is? Thanks for any help!