How to Apply GP India Packages (Rule and Non-Rule) in peoplesoft

Hi All,
Can any one tell describe detailed description about applying GP India Rule packages and Non-Rule packages.
I.e. Import, Compare and Upgrade Rules package AND Import, Compare and Upgrade Non Rules package.
Thanks in advance
Thanks & Regards,
Siva Prasad B

Hi All,
Please upadte it
Thanks & Reagards,
Siva Prasad B

Similar Messages

  • How to Apply GP India Packages in peoplesoft

    Hi All,
    Can you please tell me how to apply GP INDIA packages (Rule & Non-Rule) in detail?
    Thanks in Advance.
    Regards,
    Siva Prasad B

    Hi Siva,
    For any country, the procedure is to
    RULES:
    1. Run the Rules scripts (named typically as cc999999_imp.dms; cc is Country code; 999999 is the package/Bundle ID)
    2. Run the Compare process part for Rules package from PIA
    3. If no errors found, run the Upgrade process from the PIA (the same page)
    Anyhow, I strongly recommend you to read 'Using Utilities' in this book(http://download.oracle.com/docs/cd/E20215_01/hr91pbr1/eng/psbooks/hgpy/book.htm).
    Edited by: Rao on Sep 20, 2011 8:03 AM

  • How to apply java support packages.

    hi all,
    i applied support packages for 4.7EE but i dont know how to apply java support packages.
    can anyone explain about how to apply  java support package for netweaver s??
    from scratch anyone can explain.
    regards
    vijay

    Hello Vijay ,
    Java Support packs can be installed without using SDM also if you are on NW2004.
    Process:
    Eg SP18
    Download the following DVDs
    1. WebAS 6.40 SP18(Part 1/4): SAP Installer
    2. WebAS 6.40 SP18(Part 2/4): SAPInst Control File for Oracl
    3. WebAS 6.40 SP18(Part 3/4): OS Depend. parts of Java RuntiA
    4. WebAS 6.40 SP18(Part 4/4): OS Indep. Parts of Java Runtime
    Uncar each of them in the sequence
    1,4,3,2
    Once u uncr then u will get some more uncarred files
    eg D:\sapinst\J2EE-RUNT-CD\SCS\NT\I386\SCS.SAR uncar it into run directory : DIR_CT_RUN ( D:\usr\sap\SRX\SYS\exe\runU)
    Note: The value of DIR_CT_RUN can be found In Profile SRX_SCS01_B3BPH1W)
    Run SAPINST
    Note:Give RFC user as 000 DDIC
    Java Support packs can be installed using JSPM  if you are on NW2004s
    1)Download SP Stack or SP
    2)Copy the SCA files to /usr/sap/trans/EPS/in
    3)Execute the JSPM go.bat from \sapmnt\SID\DVEBMGSXX\j2ee\JSPM
    4) Provide SDM Password
    5 ) Select the Traget SP level .
    6 ) Deploy.
    Also, you can find the current SP Level in http://localhost:5<instance numeber>00 and then system information.
    Regards ,
    Santosh Karadkar <a href="https://forums.sdn.sap.com/click.jspa?searchID=-1&messageID=3819594">Click here for further info</a>

  • How do I fix the gray screen and non responsive cursor after iMac sleeping?

    How do I fix the gray screen and non responsive cursor after iMac sleeping?

    If you're running OS X 10.8.5 or earlier, then from the menu bar, select
     ▹ System Preferences... ▹ Accessibility
    If the checkbox at the bottom marked
    Enable access for assistive devices
    is checked, uncheck it and test.
    If you're running OS X 10.9 or later, select
     ▹ System Preferences... ▹ Security & Privacy ▹ Privacy ▹ Accessibility
    If any applications are listed on the right and have a checked box next to them, uncheck all the boxes and test. You may first have to click the padlock icon in the lower left corner of the window and authenticate as an administrator to unlock the settings.

  • How to show PL/SQL package  output and fix below error(please help)

    --PACKAGE SPECIFICATION AND BODY complied successfully but I can not see output some error are also there..  please help ;how to fix this problem
    -- with code
    CREATE OR REPLACE PACKAGE package_variables IS
    -- Declare package components.
    PROCEDURE set(value VARCHAR2);
    FUNCTION get RETURN VARCHAR2;
    END package_variables;
    CREATE OR REPLACE PACKAGE BODY package_variables IS
    -- Declare package scope variable.
    variable VARCHAR2(20) := 'Initial Value';
    -- Define function
    FUNCTION get RETURN VARCHAR2 IS
    BEGIN
    RETURN variable;
    END get;
    -- Define procedure.
    PROCEDURE set(value VARCHAR2) IS
    BEGIN
    variable := value;
    END set;
    END package_variables;
    VARIABLE outcome VARCHAR2(20)
    CALL package_variables.get() INTO :outcome;
    SELECT :outcome AS outcome FROM dual;
    EXECUTE package_variables.set('New Value');
    CALL package_variables.get() INTO :outcome;
    SELECT :outcome AS outcome FROM dual;
    OUTPUT
    PACKAGE package_variables Compiled.
    PACKAGE BODY package_variables Compiled.
    Error starting at line 2 in command:
    CALL package_variables.get() INTO :outcome
    Error report:
    SQL Error: ORA-01008: not all variables bound
    01008. 00000 - "not all variables bound"
    *Cause:   
    *Action:
    OUTCOME
    1 rows selected
    anonymous block completed
    Error starting at line 2 in command:
    CALL package_variables.get() INTO :outcome
    Error report:
    SQL Error: ORA-01008: not all variables bound
    01008. 00000 - "not all variables bound"
    *Cause:   
    *Action:
    OUTCOME
    1 rows selected
    */

    EXECUTE package_variables.set('New Value');
    CALL package_variables.get INTO :outcome;
    SELECT :outcome AS outcome FROM dual;
    OUTPUT
    anonymous block completed
    Error starting at line 2 in command:
    CALL package_variables.get INTO :outcome
    Error report:
    SQL Error: ORA-06576: not a valid function or procedure name
    06576. 00000 - "not a valid function or procedure name"
    *Cause:    Could not find a function (if an INTO clause was present) or
    a procedure (if the statement did not have an INTO clause) to
    call.
    *Action:   Change the statement to invoke a function or procedure
    OUTCOME
    1 rows selected

  • How to apply patch to forms 6i and report 6i version

    Hi to All,
    Can any give any link or Metalink Doc ID or any method to how to apply patch to forms and reports 6i in cleint server architecture.
    Thanks and Regards
    imran

    Hi user622720
    Pls Check this Link
    Pls verify this as an example:
    MyProject =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = servername)(PORT = 1540))
    (CONNECT_DATA =(SID = TEST))
    and change the bold fields as required according to ur application..!
    Hope it Helps,
    Regards,
    Abdetu..

  • How to fix "cannot convert between unicode and non-unicode string data types" :/

    Environment: SQL Server 2008 R2
    Introduction:Staging_table is a table where data is being stored from source file. Individual and ind_subject_scores are destination tables.
    Purpose: To load the data from a source file .csv while SSIS define table  fields with 50 varchar, I can still transfer the data to the entity table/ destination and keeping the table definition.
    I'm getting validation error "Cannot convert between a unicode and a non-unicode string data types" for all the columns.
    Please help

    Hi ,
    NVARCHAR = DT_WSTR
    VARCHAR = DT_STR
    Try below links:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/ed1caf36-7a62-44c8-9b67-127cb4a7b747/error-on-package-can-not-convert-from-unicode-to-non-unicode-string-type?forum=sqlintegrationservices
    http://social.msdn.microsoft.com/Forums/en-US/eb0d1519-4be3-427d-bd30-ae4004ea9e8d/data-conversion-error-how-to-fix-this
    http://technet.microsoft.com/en-us/library/aa337316(v=sql.105).aspx
    http://social.technet.microsoft.com/wiki/contents/articles/19612.ssis-import-excel-to-table-cannot-convert-between-unicode-and-non-unicode-string-data-types.aspx
    sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

  • How to apply an InDesign Paragraph Rule above, but not when first in column

    How do I apply a paragraph rule "above" but not when first in a column. In other words, the rule above will only run if it isn't the first paragraph in the column (even if it appears in a multi-column text frame).
    Before you jump the gun: Rule below will not solve that, for various reasons.
    Thanks much in advance.

    Aha! Apparently totally!
    Here a similar way to yours with an anchored block. Copy it and launch this simple regex. Easy with no headache! 

  • How to apply data into 2 tables AND to more than one record in same table?

    Hello,
    I am trying to apply/insert data into 2 tables AND at the same time apply data to more than one record (in the same table). How would I do this in APEX?
    I have updated using one table with no problem, however, when I try updating with the two tables/ multiple record sets, I get errors.
    I appreciate the help.
    Thanks.
    Linda

    You can achieve what you want using PL/SQL. Can you post ur code?

  • How to apply ERP enhancement packages?

    Any document around? Please help. Thanks!

    Hi ,
    I want to install EHP3 on My ERP system. 
    Installation document on EHP3 says that .
    1. Make sure that you have installed at least SAP Solution Manager 4.0 Support Package 13.
    2. Update the Solution Manager Content to at least ST-ICO 150 Support Package 13.
    But My Solman system 4.0 has only SP level 7. and ST-ICO -level  : 6.
    Is it possible to download the EHP3 from My solman server (SP7). 
    Please guide me how to download EHP3 for ECC6.
    Thanks and Regards
    Thirumal.

  • How to retreive contents of package spec and body over jdbc

    is there a query i can issue that would return the contents (both spec and body) of a database package? similar to "desc schema.pkg" ?
    i want to issue this query via jdbc and get back the contents of the package spec/body.

    solved:
    select * from user_source where name='my_pkg'
    Message was edited by:
    user612126

  • How to apply group settings of UDF and UserDefinedValues to all documents ?

    I have made many User Defined Fields, category group settings of UDF, and User Defined Values (Formatted search) in a marketing document.
    And I want to apply them to all of the marketing documents, that is Sales and Purchase documents,,, all the same.
    Is there any way to achieve it?
    Thanks in advance...

    Thanks,,
    This thread it not about setting for different users but for different type of documents.
    And is there any way to configure the category settings of UDF for document types by SDK coding?
    Edited by: Sung-Su Beck on Nov 29, 2011 7:27 AM

  • How to maintain order of Full Screen and non Full Screen apps in Mission Control

    Hey guys, so i've gotten used to Full Screen Apps now, but as a power user who was used to Spaces, I like my windows to be in a specific order. 10.7.2 was great in that we can now re-arrange our screens in Mission Control, however, as soon as I do a restart, Lion reverts to having desktops on the left, and full screen apps on the right (i.e., it doesn't keep the order in which I left them before the restart). Now this really bugs me because by using the swipe feature, I want to know EXACTLY what app is to the left or right of me, as opposed to just turning on the "Order screens by most recent use" option, which I find to be too chaotic and unorganized. Has anyone figured out a way to do this? Below of pics of how I would like Mission Control to look like, and how it looks like after a restart.
    How I'd like for Mission Control to look like: (Desktops and Full Screen Apps intermingling)
    How Lion re-arranges Mission Control after a restart: (Full Screen Apps to the right)

    Shift-CMD-F toggles full screen off and on in Fx. Also, if you've put the Full Screen icon in the Firefox Toolbar, bring the mouse cursor up to the top of the screen. This will reveal the toolbar and you can click on the icon to return to normal.
    Get the icon from View>Toolbars>Customize. Drag it into the Toolbar somewhere.
    Message was edited by: WZZZ

  • How do InDesign documents compare on retina and non-retina screens?

    I've heard that InDesign looks bad on retina screens, but I don't live near a mac dealer and I can't see any photos anywhere to judge for myself.
    Does anyone have any photos which could show how it compares to a non-retina mac?

    Hi Anubha,
    I do not understand what you said below.
    I am running Adobe Acrobat Pro Version 9.5.5. I do not remember whether it came with Photoshop or InDesign.
    When I open Photoshop, it opens without my having to follow any instructions to activate the software. As a matter of fact, I cannot find my Photoshop serial number anywhere in the Photoshop program itself. I do know it from my profile at Adobe.com. Are you suggesting I deactivate Photoshop on the new computer and then reactivate it using my serial number? Will it reactivate?
    When you say
    "/Library/Application Support/Adobe" at the root level of the startup disk (not the Library folder inside a user's Home folder)
    what do you mean? I do not have a startup disk. I have the original installation disk but that version of Photoshop has been updated a few times.
    After staring at your instructions for a while, I realized that you might be talking about the Library/Application Support folders resident on my Macintosh HD, although why you called it a startup disk is unclear to me. IAC, I went into those folders and duly moved the three folders into a new folder I called “Acrob1” and restarted Adobe Acrobat 9 and got the following error message: “AMT Subsystem Failure  The licensing subsystem has failed catastrophically. You must reinstall of call customer support.” with a small (6).
    By undoing my actions I am back to the staus quo ante.
    Now what?
    Regards, Robert

  • How to Apply YTM and MTD filter to the Query Calculating "Total Sales" Amt

    Hi,
    I got the requirement to calculate "Total Sales" amount in following format,
    1. Calculate Total Sales YTM per Country
    2. Calculate Total Sales MTD per Country
    I am done with Queries to get Country wise Total Sales amount but stuck at the point, how to apply YTM (Year to Month) and MTD (Month to Date) filter. Can anyone have idea about how to apply YTM and MTD filter to query??
    Regards,
    Priyanka

    Hi,
    I got the requirement to calculate "Total Sales" amount in following format,
    1. Calculate Total Sales YTM per Country
    2. Calculate Total Sales MTD per Country
    I am done with Queries to get Country wise Total Sales amount but stuck at the point, how to apply YTM (Year to Month) and MTD (Month to Date) filter. Can anyone have idea about how to apply YTM and MTD filter to query??
    Regards,
    Priyanka

Maybe you are looking for

  • How to do Alias of multiple columns?

    Hello Pl/SQL gurus - I have a sql query as following - SELECT A as AA , B as BB, C as CC, D as DD, E as EE, F as FF FROM TABLE A TABLE B TABLE C WHERE..... Now i want to give some Alias say AAA to already aliased column AA,BB and BBB to CC,DD and CCC

  • Java SSF for Digital Signatures and Document Encryption

    Hello, I have read in "SAP Help - Java Development Manual" that there is a Java SSF library for Digital Signatures and Document Encryption API. http://help.sap.com/saphelp_nw04s/helpdata/en/4f/65c3b32107964996a56e4165077e24/frameset.htm I am trying t

  • ECC 5.0 and CRM 7.0 Integration Questions

    Hello, We are on ECC 5.0 and are part of a global implementation that is putting in CRM 7.0. We have a couple of issues/questions. 1.  We want to integrate ECC Internal Orders with CRM Contracts and Orders.  However we don't see the ECC Internal Orde

  • I Pod Touch Music player stopped working but Sounds and iTunes samples still work?? Help.

    Howdy. My Music player has stopped working, but regular sounds and iTunes samples still work?? Can anyone help. Push the orange music button and the player opens, but when I push the play button nothing happens other than the pause icon comes up. Bot

  • Secured media access over Internet on ix2-dl

    I have been very happy with accessing my media off my ix2-dl over LAN with moy mobile devices, and I noticed that the Media Server functionality does allow for remote Internet access to my media. I'm trying to understand whether or not that is secure