How to apply patch on database 9.2.0.1.0

Please any body can send patch applying procedure. I want to apply patch on 9.2.0.1.0 to new release.
Thanks

What do you mean by 'new release' in your thread? 9.2.0.8.0 is not the new release, but the latest and the last patchset for 9iR2.
You should download from metalink the patchset corresponding to your platform (actually not specified either) using your valid CSI.
~ Madrid

Similar Messages

  • How to apply patch to forms 6i and report 6i version

    Hi to All,
    Can any give any link or Metalink Doc ID or any method to how to apply patch to forms and reports 6i in cleint server architecture.
    Thanks and Regards
    imran

    Hi user622720
    Pls Check this Link
    Pls verify this as an example:
    MyProject =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = servername)(PORT = 1540))
    (CONNECT_DATA =(SID = TEST))
    and change the bold fields as required according to ur application..!
    Hope it Helps,
    Regards,
    Abdetu..

  • How to apply patches to SP16?

    Hi,
    I am looking for a clear direction of how to apply patches to the J2EE Engine 6.40 SP16 to SP20. I have NW04, and the patch level is 102141.313. Please tell me how to start. Thank you.
    Regards,
    -Napadol

    Hi,
    Download te following file from service markeplace
    CTRLMSS20_0-20001822.SAR
    J2EERT20_0-10001982.SAR
    J2EERTOS20_0-20001822.SAR
    SAPINST20_0-20001822.SAR
    Uncar these SAR files
    Hope you know how to uncar these files.
    After Uncarring two folders will be generated.
    J2EE-RUNT-CD
    SAPINST-CD
    Run the <b>sapinst</b> present within the SAPINST-CD folder.
    Choose the option Import support package.
    This will patch the engine from SP16 to SP20
    Any queries revert back.
    Do reward poits.
    Regards,
    Nayana

  • Applying patch to database...

    Hi an anybody guide me how to apply a patch to a database.. say I am applying patch in 10.2.0.4 to move it to *.*0.5..
    how is it different from applying PSUs??
    if after applying that also it shows us old version what cud be the reason??
    Please suggest

    Hi Saha,
    It depends on what kind of patch you are applying. Some patches could be as big as a full database upgrade and other could be as small as just to run ‘opatch apply’. For all patches, when you down load the patch binary files please also download the related documents and read the document thoroughly. Also don’t forget to check post-patch instruction.
    If you are simply looking for a general command to apply oracle one off patch then the command is ‘opatch apply’. For other opatch options please execute ‘opatch –help’.
    Hope this helps, Thanks,
    = Zia

  • How to apply patches by using solution manager system?

    HELLO FRIENDS,
        when i download the patch SAPKB70012 & next level patches from service market place, it says that we have to apply the following packages by using maintenance optimizer(solution manager). here i have solution manager4.0., please any one let me know how to configure the maintenance optimzr  and how to apply support packages by the solution manager system.
              Thanks&Regards
               Farkath.C

    Hello
    Solman will not implement the files you can download the files using Solman. You need to move the downloaded files to application server and implement them for that you need to configure MoPZ
    You can go to server market place service.sap.com/RKT in that select Solution manager.
    You will have to select the product as solution manager 7.0 and in technology consultants and system administrator you will find the configuration documentations in for for SIM files.
    You can use that and learn how to configure the optimizer on the system.
    Then you can download the files and implement the same.
    Regards
    Vivek

  • How to apply patches if application installed multinode type

    I have installed the 11.5.10.2 applications with multinode type
    node A contains Forms, web and Dbtier
    node B contains admin and concurrent.
    In my case how do i apply patches( U Driver)
    I started applying pathes from Node B went smoothly, but
    If start applying patches on node A it showing some errors

    while applying 5985992 on node B , the fallowing erros is showing
    AutoPatch error:
    Error while executing statement
    AutoPatch error:
    ORA-06550: line 3, column 10:
    PLS-00302: component 'IS_PATCH_APPLIED2' must be declared
    ORA-06550: line 3, column 1:
    PL/SQL: Statement ignored
    I fallowed the metalink doc 556785.1, Now the error is resolved but is it necessary to apply u5985992.drv on both the nodes

  • How to apply patches

    I'm trying to apply patches to dbxml 2.2.13.
    I'm pretty sure I'm alone in finding this tricky...but here goes:
    Each patch seems to need some different -p arg to strip some arbitrary bit of the path. Am I missing something obvious here?
    A couple (eg patch 6 shown below) don't work (I tried downloading using different browsers just in case they're not saving plaintext right)...
    patch -p1 < ../patch.2.2.13.6
    missing header for context diff at line 3 of patch
    (Stripping trailing CRs from patch.)
    patching file src/dbxml/nodeStore/NsEventGenerator.cpp
    Hunk #1 FAILED at 357.
    1 out of 1 hunk FAILED -- saving rejects to file src/dbxml/nodeStore/NsEventGenerator.cpp.rej
    Again, I've not used patch before so apologies for being thick.

    Jacoby,
    I think you're right. The patch files have somehow become inconsistent that way. The code portions are still correct.
    I'll look into fixing this, but in the mean time, if you hand edit the patch files so that the relative paths to the individual files involved is consistent, they'll work better.
    Regards,
    George

  • How to apply patch on Kernal for ECC 5.0?

    Hi,
    I have installed a new SAP ECC 5.0 system. The release verion shows the current Release as 6.4 and Patch Level 43. Now I want to apply the latest patch on Kernal.
    Can any one please provide me the steps for
    1). How to proceed with the Kernal upgarde?
    2). Which all files to be downloaded from Service Marketplace before proceeding  
         with the upgrade?
    3). Any configurations/back up to be done before starting with upgradation?
    4). Any document for the upgradation of Kernal.?
    5). How to confirm whether the upgradation has been done sucessfully?
    Please reply ASAP!
    Thanks in advance.
    Regards,
    Manish

    HI
    For latest patches you can check at
    http://service.sap.com/swdc -> Support Packages and
    Patches -> Entry by application -> Application Components
    -> SAP ERP -> ERP2004 -> SAP ECC Server
    There are two kinds of kernal files:
    SAPDBEXE and SAPEXE,one is DB dependent and one file is DB independent.
    For downloading the kernal patch:Follow the below path as per your OS and DB combination
    for downloading a kernel patch
    go through following
    service.sap.com/swdc
    downloads-> SAP Support packages -> My Company's Application Components -> SAP KERNEL 32 bit ->SAP KERNEL 4.6D 32-BIT ->SAP KERNEL 4.6D 32-BIT->Windows Server on IA32 32bit -> Select ur database->Windows Server on IA32 32bit
    Reward suitable points

  • Apply patch without database

    Hi, I install oracle 11.2.0.1 software without db to my os.
    Before creating a new database I want to apply the patches which this version needs.
    Is this possible or should I create db and apply the patches later? In patch document,
    it mentions the steps as I already have db. Thanks.

    efendicans wrote:
    I won't move the db. I will create a new one and import a schema with datapump from another db(10.2.0.2). As I understand from your replies I can patch binaries, create db and then import schema(without applying the db steps in patch document). Am I right? Thank you.Again, it depends on how you create the database. Go through the dbca wizard and select "custom" instead of one of the pre-defined databases. When you choose "custom", the script that gets generated to create your database starts with nothing and does a CREATE DATABASE. So your database is created from the git-go with the patched system. If you chose one of the pre-defined database types, it gets created by restoring a 'seed' database that was most likely created at the base level, so would need to have the database portion of any patches applied.
    I never use the pre-defined databases, for this very reason.
    (PS it would be very educational for you to go through dbca twice, once for a pre-defined db, and once for a custom. At the end, simply select 'create scripts' WITHOUT actually creating the database. Then study the scripts.)

  • How to apply patch 118833-36 on a containerized server?

    We have a V890 running Solaris 10 that has two zones (containers) running instances
    of Oracle database. `smpatch' won't install patch 118833-36 in the normal manner
    because it's flagged as an interactive patch. The recommended procedure is to shut
    the server down, boot it in single-user mode and then apply the patch this way:
    # cd /var/sadm/spool
    # smpatch add -i 118833-36
    Then, you are supposed to shut it down again, do a reconfiguration boot, and finally
    run smpatch again to apply the remaining patches.
    Will this procedure work for a server with containers? I understand that the zones have
    to be running for the patch upgrade to succeed. Is there a way to boot the zones into
    single-user mode as well? We need to ensure that Oracle doesn't start during the
    patch procedures.

    Log into the global zone and run :
    # shutdown -y -g0 -is
    This should bring down the global zone to su mode and halt the other zones (notice Halt)
    However I believe there is a bug presently where this does not always happen and you are still able to telnet to the local zones.
    Local zone admin could always run zoneadm -z <zone-name> halt on each zone (notice halt not single-user).
    Once global zone in in single-user mode install the patch as normal, when the global is done it will bring up each local zone to single-user mode to add the patch too.
    118833-36 may need patch add and -G option as this patch also has been experiencing some issues, in which case I believe you would need to do the patch add process on each zone manually
    Once the global zone is brought back up again it should bring up the local zones as well.
    Let us know if you experience the locals not being halted as mentioned above and need to do it manually.

  • How to apply patch for MSAHH02_0-10003081.ZIP( xMSA FOR HH (WITH CRM) 5.0 S

    Hi All,
    I am working on xapps for Mobile to implement CRM mobile sales for handheld using  CRMHH 5.0. For that I am using the WAR file MSAHH02_0-10003081.ZIP( xMSA FOR HH (WITH CRM) 5.0 SR02 ) available on SAP marketplace.
    Now I want to apply the patch available for the same i.e. MSAHH02P_4-10003081.ZIP(Patch for MSA FOR HH (WITH CRM) 5.0 SR02 )
    Can anyone please tell the  procedure to apply the patch.
    Thanks & Regards
    Sumit

    HI
    For latest patches you can check at
    http://service.sap.com/swdc -> Support Packages and
    Patches -> Entry by application -> Application Components
    -> SAP ERP -> ERP2004 -> SAP ECC Server
    There are two kinds of kernal files:
    SAPDBEXE and SAPEXE,one is DB dependent and one file is DB independent.
    For downloading the kernal patch:Follow the below path as per your OS and DB combination
    for downloading a kernel patch
    go through following
    service.sap.com/swdc
    downloads-> SAP Support packages -> My Company's Application Components -> SAP KERNEL 32 bit ->SAP KERNEL 4.6D 32-BIT ->SAP KERNEL 4.6D 32-BIT->Windows Server on IA32 32bit -> Select ur database->Windows Server on IA32 32bit
    Reward suitable points

  • How to apply patches to BW instance

    we have NW04 SR1 software.
    Using the SAPINST gui we installed WebAS Unicode with Java Add-in.
    We did a client copy 010 for XI and 020 fro BW. (We want to maintain different clients for XI and BW).
    Then we installed the BW UDI Component, XI and Adapter Engine.
    We started applying the patches - Servcie Pack 18.
    ABAP patches went well.
    While installing the J2EE patches,I have to specify the client. So I specified the XI client 010 and installed the J2EE patches.
    Now my question is - do install the J2EE patches for BW purpose with client 020?
    If so, will there be any conflict between the install done with client 010?
    Please advise.
    Thanks,
    Bhaskar

    closing  - no answer

  • Apply Patches on Oracle Database with Logical Standby Database

    Here I am:
    I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
    I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
    1)Stop SQL apply
    2)Apply patches on logical standby database
    3)let the name server point to the backup site
    4)Apply patches on the primary database
    5)Start SQL apply
    6)Let the name server point back to the production site
    Thanks in advance.

    Pl follow the steps in MOS Doc 437276.1 ( Upgrading Oracle Database with a Logical Standby Database In Place )
    HTH
    Srini

  • Note on applying patches to the file system and database

    Dear all,
    I am new to Oracle E-business suite. Anyone in the house that can give a note (either a step by step or oracle metalink note) on how to apply patches to a file system or database.
    Kind Regards.

    Hi,
    Steps to apply an application patch:
    - Stop all application services (keep the database and the database listener up and running)
    - Download the patch from Metalink
    - Copy the patch file to any directory (i.e. /u04/patches)
    - As 'applmgr' do the following:
    - Source the environment file
    - $ cd /u04/patches
    - Type 'unzip <patch_number>.zip'
    - cd <patch_number>
    - Type 'adpatch'
    - When it prompts you to enter the patch driver, type 'u<patch_number>.drv'
    Apply the patch on the database tier first then on the application tier.
    Do not forget to 'Enable Maintenance Mode' from adadmin before applying the patch. Once you apply the patch successfully, 'Disable Maintenance Mode' from adadmin.
    And, always follow the steps in the patch README file.
    For database patches, follow the steps in the patch README file and apply the patch using opatch as oracle user.
    For more details about applying patches, please refer to:
    "Oracle Applications Maintenance Utilities" manual
    http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
    How to apply EBS 12i pathces in both Linux and Windows
    Re: How to apply EBS 12i pathces in both Linux and Windows
    Need to apply patch!
    Need to apply patch!
    Regards,
    Hussein

  • How To Install Patch in BI Publisher Server

    Hi Experts,
    Can any one please guide me how to apply patch in BI Publisher server.
    Any reference would be appreciated.
    P.S : I have gone through the "read me" file but it is not making much sense to me.
    Regards,
    Andy

    What patch is this ? PSU/CPU or a upgrade ?

Maybe you are looking for