How to apply patches if application installed multinode type
I have installed the 11.5.10.2 applications with multinode type
node A contains Forms, web and Dbtier
node B contains admin and concurrent.
In my case how do i apply patches( U Driver)
I started applying pathes from Node B went smoothly, but
If start applying patches on node A it showing some errors
while applying 5985992 on node B , the fallowing erros is showing
AutoPatch error:
Error while executing statement
AutoPatch error:
ORA-06550: line 3, column 10:
PLS-00302: component 'IS_PATCH_APPLIED2' must be declared
ORA-06550: line 3, column 1:
PL/SQL: Statement ignored
I fallowed the metalink doc 556785.1, Now the error is resolved but is it necessary to apply u5985992.drv on both the nodes
Similar Messages
-
How to apply patch to forms 6i and report 6i version
Hi to All,
Can any give any link or Metalink Doc ID or any method to how to apply patch to forms and reports 6i in cleint server architecture.
Thanks and Regards
imranHi user622720
Pls Check this Link
Pls verify this as an example:
MyProject =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = servername)(PORT = 1540))
(CONNECT_DATA =(SID = TEST))
and change the bold fields as required according to ur application..!
Hope it Helps,
Regards,
Abdetu.. -
How to apply patches to SP16?
Hi,
I am looking for a clear direction of how to apply patches to the J2EE Engine 6.40 SP16 to SP20. I have NW04, and the patch level is 102141.313. Please tell me how to start. Thank you.
Regards,
-NapadolHi,
Download te following file from service markeplace
CTRLMSS20_0-20001822.SAR
J2EERT20_0-10001982.SAR
J2EERTOS20_0-20001822.SAR
SAPINST20_0-20001822.SAR
Uncar these SAR files
Hope you know how to uncar these files.
After Uncarring two folders will be generated.
J2EE-RUNT-CD
SAPINST-CD
Run the <b>sapinst</b> present within the SAPINST-CD folder.
Choose the option Import support package.
This will patch the engine from SP16 to SP20
Any queries revert back.
Do reward poits.
Regards,
Nayana -
How to apply patches by using solution manager system?
HELLO FRIENDS,
when i download the patch SAPKB70012 & next level patches from service market place, it says that we have to apply the following packages by using maintenance optimizer(solution manager). here i have solution manager4.0., please any one let me know how to configure the maintenance optimzr and how to apply support packages by the solution manager system.
Thanks&Regards
Farkath.CHello
Solman will not implement the files you can download the files using Solman. You need to move the downloaded files to application server and implement them for that you need to configure MoPZ
You can go to server market place service.sap.com/RKT in that select Solution manager.
You will have to select the product as solution manager 7.0 and in technology consultants and system administrator you will find the configuration documentations in for for SIM files.
You can use that and learn how to configure the optimizer on the system.
Then you can download the files and implement the same.
Regards
Vivek -
I'm trying to apply patches to dbxml 2.2.13.
I'm pretty sure I'm alone in finding this tricky...but here goes:
Each patch seems to need some different -p arg to strip some arbitrary bit of the path. Am I missing something obvious here?
A couple (eg patch 6 shown below) don't work (I tried downloading using different browsers just in case they're not saving plaintext right)...
patch -p1 < ../patch.2.2.13.6
missing header for context diff at line 3 of patch
(Stripping trailing CRs from patch.)
patching file src/dbxml/nodeStore/NsEventGenerator.cpp
Hunk #1 FAILED at 357.
1 out of 1 hunk FAILED -- saving rejects to file src/dbxml/nodeStore/NsEventGenerator.cpp.rej
Again, I've not used patch before so apologies for being thick.Jacoby,
I think you're right. The patch files have somehow become inconsistent that way. The code portions are still correct.
I'll look into fixing this, but in the mean time, if you hand edit the patch files so that the relative paths to the individual files involved is consistent, they'll work better.
Regards,
George -
How to apply patch on database 9.2.0.1.0
Please any body can send patch applying procedure. I want to apply patch on 9.2.0.1.0 to new release.
ThanksWhat do you mean by 'new release' in your thread? 9.2.0.8.0 is not the new release, but the latest and the last patchset for 9iR2.
You should download from metalink the patchset corresponding to your platform (actually not specified either) using your valid CSI.
~ Madrid -
How can I download the Applications Install DVD
Is there a way to download the Applications Install DVD? My disk got damaged.
You can get replacement System Install & Restore CD/DVDs from Apple's Customer Support - in the US, (800) 767-2775 - for a nominal S&H fee. You'll need to have the model and/or serial number of your Mac available.
If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number. Here's a list of links to all of those - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html Another resource: International Support Phone #s.
-
How to apply patch on Kernal for ECC 5.0?
Hi,
I have installed a new SAP ECC 5.0 system. The release verion shows the current Release as 6.4 and Patch Level 43. Now I want to apply the latest patch on Kernal.
Can any one please provide me the steps for
1). How to proceed with the Kernal upgarde?
2). Which all files to be downloaded from Service Marketplace before proceeding
with the upgrade?
3). Any configurations/back up to be done before starting with upgradation?
4). Any document for the upgradation of Kernal.?
5). How to confirm whether the upgradation has been done sucessfully?
Please reply ASAP!
Thanks in advance.
Regards,
ManishHI
For latest patches you can check at
http://service.sap.com/swdc -> Support Packages and
Patches -> Entry by application -> Application Components
-> SAP ERP -> ERP2004 -> SAP ECC Server
There are two kinds of kernal files:
SAPDBEXE and SAPEXE,one is DB dependent and one file is DB independent.
For downloading the kernal patch:Follow the below path as per your OS and DB combination
for downloading a kernel patch
go through following
service.sap.com/swdc
downloads-> SAP Support packages -> My Company's Application Components -> SAP KERNEL 32 bit ->SAP KERNEL 4.6D 32-BIT ->SAP KERNEL 4.6D 32-BIT->Windows Server on IA32 32bit -> Select ur database->Windows Server on IA32 32bit
Reward suitable points -
How to apply patch 118833-36 on a containerized server?
We have a V890 running Solaris 10 that has two zones (containers) running instances
of Oracle database. `smpatch' won't install patch 118833-36 in the normal manner
because it's flagged as an interactive patch. The recommended procedure is to shut
the server down, boot it in single-user mode and then apply the patch this way:
# cd /var/sadm/spool
# smpatch add -i 118833-36
Then, you are supposed to shut it down again, do a reconfiguration boot, and finally
run smpatch again to apply the remaining patches.
Will this procedure work for a server with containers? I understand that the zones have
to be running for the patch upgrade to succeed. Is there a way to boot the zones into
single-user mode as well? We need to ensure that Oracle doesn't start during the
patch procedures.Log into the global zone and run :
# shutdown -y -g0 -is
This should bring down the global zone to su mode and halt the other zones (notice Halt)
However I believe there is a bug presently where this does not always happen and you are still able to telnet to the local zones.
Local zone admin could always run zoneadm -z <zone-name> halt on each zone (notice halt not single-user).
Once global zone in in single-user mode install the patch as normal, when the global is done it will bring up each local zone to single-user mode to add the patch too.
118833-36 may need patch add and -G option as this patch also has been experiencing some issues, in which case I believe you would need to do the patch add process on each zone manually
Once the global zone is brought back up again it should bring up the local zones as well.
Let us know if you experience the locals not being halted as mentioned above and need to do it manually. -
Hi All,
I am working on xapps for Mobile to implement CRM mobile sales for handheld using CRMHH 5.0. For that I am using the WAR file MSAHH02_0-10003081.ZIP( xMSA FOR HH (WITH CRM) 5.0 SR02 ) available on SAP marketplace.
Now I want to apply the patch available for the same i.e. MSAHH02P_4-10003081.ZIP(Patch for MSA FOR HH (WITH CRM) 5.0 SR02 )
Can anyone please tell the procedure to apply the patch.
Thanks & Regards
SumitHI
For latest patches you can check at
http://service.sap.com/swdc -> Support Packages and
Patches -> Entry by application -> Application Components
-> SAP ERP -> ERP2004 -> SAP ECC Server
There are two kinds of kernal files:
SAPDBEXE and SAPEXE,one is DB dependent and one file is DB independent.
For downloading the kernal patch:Follow the below path as per your OS and DB combination
for downloading a kernel patch
go through following
service.sap.com/swdc
downloads-> SAP Support packages -> My Company's Application Components -> SAP KERNEL 32 bit ->SAP KERNEL 4.6D 32-BIT ->SAP KERNEL 4.6D 32-BIT->Windows Server on IA32 32bit -> Select ur database->Windows Server on IA32 32bit
Reward suitable points -
How to apply patches to BW instance
we have NW04 SR1 software.
Using the SAPINST gui we installed WebAS Unicode with Java Add-in.
We did a client copy 010 for XI and 020 fro BW. (We want to maintain different clients for XI and BW).
Then we installed the BW UDI Component, XI and Adapter Engine.
We started applying the patches - Servcie Pack 18.
ABAP patches went well.
While installing the J2EE patches,I have to specify the client. So I specified the XI client 010 and installed the J2EE patches.
Now my question is - do install the J2EE patches for BW purpose with client 020?
If so, will there be any conflict between the install done with client 010?
Please advise.
Thanks,
Bhaskarclosing - no answer
-
Apply Patches on Oracle Database with Logical Standby Database
Here I am:
I got a primary database with a logical standby database running Oracle 11g. I got two client applications, one is the production site pointing to the primary one, another one is just a backup site pointing to the logical one.Things will only be written into the primary database every mid night and client applications can only query the database but not add, update nor delete.And now, I want to apply the latest patch on both of my databases. I am also the DNS administrator, I can make the name server pointing to the backup site instead of the production one.I want to firstly apply the patch on the logical one, and then the physical one.
I found some reference which explains how to apply patches by adopting "Rolling Upgrade Method". however, I want to avoid doing any "switch over" mentioned in the reference because I can make use of name server. Can I just apply patches as the following way?
1)Stop SQL apply
2)Apply patches on logical standby database
3)let the name server point to the backup site
4)Apply patches on the primary database
5)Start SQL apply
6)Let the name server point back to the production site
Thanks in advance.Pl follow the steps in MOS Doc 437276.1 ( Upgrading Oracle Database with a Logical Standby Database In Place )
HTH
Srini -
Note on applying patches to the file system and database
Dear all,
I am new to Oracle E-business suite. Anyone in the house that can give a note (either a step by step or oracle metalink note) on how to apply patches to a file system or database.
Kind Regards.Hi,
Steps to apply an application patch:
- Stop all application services (keep the database and the database listener up and running)
- Download the patch from Metalink
- Copy the patch file to any directory (i.e. /u04/patches)
- As 'applmgr' do the following:
- Source the environment file
- $ cd /u04/patches
- Type 'unzip <patch_number>.zip'
- cd <patch_number>
- Type 'adpatch'
- When it prompts you to enter the patch driver, type 'u<patch_number>.drv'
Apply the patch on the database tier first then on the application tier.
Do not forget to 'Enable Maintenance Mode' from adadmin before applying the patch. Once you apply the patch successfully, 'Disable Maintenance Mode' from adadmin.
And, always follow the steps in the patch README file.
For database patches, follow the steps in the patch README file and apply the patch using opatch as oracle user.
For more details about applying patches, please refer to:
"Oracle Applications Maintenance Utilities" manual
http://download-uk.oracle.com/docs/cd/B25516_14/current/html/docset.html
How to apply EBS 12i pathces in both Linux and Windows
Re: How to apply EBS 12i pathces in both Linux and Windows
Need to apply patch!
Need to apply patch!
Regards,
Hussein -
Plan to apply patch SAP_JTECHS 7.00
Hi
I am planing to apply patch SAP_JTECHS 7.00 SP18 patch level 13 for Note.1416047.
Current support package version
SAP_JTECHS 7.00 SP13 patch level 0
JSPM 7.00 SP13 patch level 0
I would like to know how to apply patch.
I assume to do below.
1.update JSPM above SP18
2.update SAP_JTECHS SP18 level 13.
Please let me know if I'll need to do other operations.
Thanks and Regard,
Junichi HoshiHi,
The other post says you have to apply the complete stack instead of applying a single component. All the components should be on the same stack level. Its up to you and your team wheather you want to apply stack or just a single component.
You can download the stack from the market place http://service.sap.com/swdc
Regards,
Vamshi. -
Hi,
Windows xp
oracle form 10.1.2.0.2
How to apply patch 9593176 ?
there is no tool for that ?
Regardskingadmin wrote:
Hi,
Windows xp
oracle form 10.1.2.0.2
How to apply patch 9593176 ?
Before apply of this patchset, you have to apply patch *5983622*.
Do you done this already ?
Hope this helps
Hamid
Maybe you are looking for
-
Front Camera Freezing and Shutting Down
i have an iphone 4s and when i try to use the front camera the screen will freeze and turn blue after this it will turn black and switch me back to the rear camera. And if press on the screen for the camera to turn around again it turns black and goe
-
I got a new computer and now iTunes is telling me it can't sync with two computers
I got a new computer and now iTunes is telling me it can't sync with two computers, it's telling me it will erase what's on my iPad and re-sync. Will I lose my iPad data that's on it?
-
Hello Guyz, I have a scenario where I have to filter values of one text characteristic based on the other text characteristic. i.e I have text char whose values are either yes or no and there is a date characteristic. As per the requirement when the
-
Firefox 14 simply won't display Courier on my system. Every instance of Courier is replaced by Courier New, and it makes my website look improper (I want the aliased look of the original Courier font). Why won't Firefox 14 use Courier?
-
How to put dots at the end of dmee line instead of blanks?
dear all, i have a question about dmee, one customer needs just a line in the dmee has dots at the end instead of blanks. This field has 36 chars. when it is filled with fpayh-zstra, the blank fields should be dots instead, and they want this just fo