How to apply transitions to objects Cp5?

Hello all...
I would like to apply transition effects(fly, blinds,etc) to objects like rectangle, highlight box, text caption, etc.
Can anyone suggest me to add more animation effects(as much as possible in Cp) to give my project a good look as if it is created in Flash.
Thanks,
Kartik.

Hello Kartik,
I suppose you already explored the Effects coming with Captivate 5? And that you already tried out combinations of those effects (that can be stored as new customized effects)? You can already have a lot of transitions created that way.
If you have Flash CS5 you can create other Classic tweens (not the Motion tweens), export them as XML (Commands menu) and import them as new customized effects in Captivate to have them available. Would that do?
Lilybiri
PS: in another thread I just did see that you are considering upgrading to CP5, perhaps this (old) blog post could help you about customized effects:
Editing motion paths and reusing customized effects

Similar Messages

How to apply transitions between clips in the same track?

Hey guys,
I'm in Uni on Final Cut Pro 5 and all the videos and discussions tell of how to apply transitions between clips in the same track.
I like to have my clips on different tracks so that I can overlap them at specific points but I don't know how to do this?
If I have track one. . .which ends. . .and have track 2 beginning below that (and have it overlapped for a few seconds) I don't know how to enable the transition at the point where track 2 begins.
Can anyone help?

Yep I understand that.
Let's say I overlap track 2 as I don't like the beginning of it. . .so I want the transition from the end of track one to track two to occur in the middle of track 2 - should I just trim the track to the point I want the transition to occur as opposed to have it overlapping?

Photoshop CS6 Video - how to Apply Many Transitions Efficiently ?

Hello, i edit lots of software video tutorials inside Photoshop CS6 and overlay the videos with lots of red circles and keyboard keys. All these overlays need a short fade-in and fade-out. How can i apply these fade-ins and fade-outs more efficiently?
So far i only can do like this:
- If have to drag every single fade-in and every single fade-out to every single object, these are two actions per object. I believe there is no keyboard command for this and also i cannot create my own keyboard command here.
- Often i *copy* an object with Ctrl-J which already *has* the fade-in and fade-out. But the newly *copied object* does *not* sport the fade-in and fade-out; so i have to apply those manually again.
Is there any way to speed up the procedure of applying transitions? (Bulk-apply transitions? Keyboard ways?)
I already tried to activate the special time-frame keyboard commands. But i believe it doesn't help with the task i described (applying transitions). What's more, with special time-frame keyboard commands active, the arrow keys get new tasks then; but i need the arrow keys for *regular* keyboard commands in connection with the move tool (to precisely move the overlay objects to their desired position).
Any hints would be great!
More generally:
If you know any *advanced* tutorials on video in Photoshop CS6 (written or video), i would be interested. I am very familiar with general Photoshop including general video there. I don't need any introduction.
I have also tried to do my tasks in Premiere Pro CS6, but found it a bit overwhelming and went back to edit the video tuts in Photoshop. Even though after some getting-used-to-it, Premiere might be better for me. I *do* have to import lots of smart-objects and vector-objects with transparency from Photoshop all the time, and Photoshop is my natural habitat.
Thanks for all suggestions!

The long and short answer is that you are using the wrong tool, but since you already tried Premiere and were "overwhelmed", well, I guess that settles that. Seems to me you have locked yourself into a corner by habitually using PS for everything, no matter how awkward. It would really be easy to export all your graphics to separate files, import them in Premiere, build a prototype project and then save everything as presets. The same would be true for After Effects. In fact you could probably create a lot of stuff even natively in both programs using the titler tool or effects... Also what you describe is exactly what tools like Camtasia Studio also do automatically based on the mouse and keyboard data recorded during the session. I know it's not what you wanna hear, but it seems to me you are really using the wrong set of tools... As for solutions in PS - perhaps there's a way to get the edit points with scripting and then apply transitions automatically, but that's most likely as good as it gets...
Mylenium

How do I create a new Style that can be applied to an object?

Under the Assets menu there is a tab called “Styles”. My question is how do I create a new Style that I can apply to an object??? A link to a tutorial or something like that would be useful because I can’t find anything!!! Thanks in advance for helping me eliminate this frustration!!!

KomputerMan.com wrote:
What I want to do is create a library of styles that are basically pictures of various wood types.
There are a couple of approaches you could try.
Clipping paths
1. Draw the part shape as a closed path.
2. Position the image of woodgrain above or below the shape where you want it positioned.
3. Cut
4. Select the closed path.
5. Paste Inside.
See: Using FreeHand MX > Contents > Working with Objects > Working with clipping paths
Tiled fills
1. Use autotrace to trace the image of the woodgrain, using plenty of colors.
Using FreeHand MX > Contents > Using Imported Artwork > Tracing bitmaps > Tracing an image
2. Group the traced paths (but not the image) and create a tiled fill,
Using FreeHand MX > Contents > Using Strokes and Fills > Applying attributes to fills > Using tiled fill attributes
3. Make a style from a tile-filled object
4. Apply the style to other objects.
Judy Arndt

How to apply image (logo) to imported 3ds object?

I have a 3ds model of a golf ball I purchased. It imports properly into my Photoshop CC. I haven't been able to figure out how to apply an image (my logo) to the surface of the golf ball. Also, the golf ball has a dimpled surface so I will want the image to follow the contours of the ball, as if it would look if the logo were painted onto a real golf ball.
EDIT: Also, I want to keep the golf ball as a 3d object so I can animate it in a scene.
Thanks, Jerry

Mylenium, thanks for your response but unfortunately I'm still missing something here. I have two problems:
1. I don't understand how to size the logo to only cover a small portion of the golf ball. Because of the other problem I'll describe in 2) below, I simplified my test by trying this on a basic PS sphere. I loaded the logo image into the diffuse texture but it wraps the sphere. I tried editing the texture thinking I could fix it by using Transform scale, but that is greyed out. So, how do I cause the logo to apply to a small portion of the surface (as a traditional golf ball logo would appear)?
2. Perhaps the bigger issue here is when I attempt to do this with the golf ball 3ds model instead of the PS sphere, the wrapped logo appears to be sitting somewhere between the outer surface of the ball and the inner core. In other words, the wrapped logo has a very sporadic appearance where it shows up in some dimples but not others. It isn't just applying to the surface of the ball. Thinking this might have been a problem with the .3ds model I acquired an .obj golf ball from a different source but it exhibited exactly the same problem.
I'm experienced with PS and 3D in a couple of other programs, but new to 3D in PS. I appreciate your help with this.
Jerry

How do I transition color or opacity when mouseover using code?

Hello all,
I am seeking to adjust the color or opacity of an object solely with code, without using any keyframes.
How would I enter the proper code to shift the opacity of an object to be 50% on mouseover, and 100% on mouseout? It would be amazing if I could even apply transition timing.
I tried using:
{-webkit-transition: opacity 0.5;}
but had no luck.
Thank you in advance for any help!
Eric

First, you must check compatibility of CSS filters here, not all browsers suport all CSS filters.
Without animation:
sym.$("pi-001").css({"-webkit-filter":"invert(1)"});
Without animation and passing variable:
var inv=1;
sym.$("pi-001").css({"-webkit-filter":"invert("+ inv +")"});
For animation I think that you must create an embed function inside alternative syntax of animate method in step parameter:
var inv=0;
sym.$("pi-001").animate({"opacity":"1"}, {duration:1000, easing:"swing", queue:true,
     step: function(){
          inv>=1? inv=1: inv+=0.2;
          console.log("Invert:" + inv); //only for test
          sym.$("pi-001").css({"-webkit-filter":"invert("+ inv +")"});

How to create transitions for Premiere?

Hello All,
I've looked and looked to see how I can create transitions for Premiere, and I keep coming up short. I'm on a Mac and I can create transitions in Motion 5 for FCPX. But I always been an Adobe guy... It's just frustrating that I can't seem to find any help creating them for Premiere. I was hoping After Effect would do the trick? Maybe a 3rd party app can do it?
Let me clear... I know how to apply a transition to my clips. What I'm looking for is how to create a costume transition. Example: my have an object / artwork as the transition.
Please help.

Not sure if Spice Master is ported for the Mac, but you might want to check out Pixelan. Besides shipping with tons of Transitions, one can do a lot of creation, and their support is excellent.
Good luck,
Hunt

How to activate all inactive objects for current user

Hi
How to activate all inactive objects for current user ...
... I have found a (long winded) way to do this:
- Environment / Inactive Objects
- Add to Worklist
- Display Worklist
- Select All
- Activate
this will open a dialog titled "Inactive Objects for <username>"
which has the exact functionality I need ... but I can't figure out how to get to this dialog directly - without so many intermediate steps
the SAP docs repeatedly mention the ability to activate the inactive worklist - but do not mention how
does anybody know the TCode for this dialog?
thanks
ps does the term "mass activation" apply to importing change requests rather than development activation?
Edited by: FireBean500 on Jun 4, 2010 11:07 PM

No other way. But usually it's far more simple as all objects are already in our own worklist.
I wonder why your objects are not already in your worklist, as everytime you create or maintain an object, it is added to your worklist.

How can I create a object for a note?

Hi experts,
I need to apply the note 501905 but when I try in the SNOTE transacction I receive this error:
Object REPS Z_MRM_DELETE_PP does not exist; create it
Diagnosis
The SAP Note that you want to implement contains changes to an object that does not yet exist in your system.
SAP Notes contain only changes to objects that already exist. This means that the the system cannot automatically create new objects during the implementation of this SAP Note.
Procedure
1. Cancel the SAP Note implementationl.
2. Create an empty object REPS Z_MRM_DELETE_PP with the corresponding object editor.
3. Restart the SAP Note implementation.
How can I create that Object??
Thanks for the help!

Hi Carlos,
It says that you have to create a new program with a name Z_MRM_DELETE_PP.
Once you create and activate the program you can execute the SAP Note.
All this processure will be written in the SAP Note.
Please Go through the Note using below:
Step1: Use T.code SNOTE.
Step2: Use menu GOTO --> NOTE BROWSER. Provide the Note no and EXECUTE.
Step3: Double click on the displayed line.
Here you will get the information to do before implementing the note.
Go through all the documentation, and once you did all the development given in the note then you can implement the note.
Regards,
Sreekanth.

How to move the anchor object in indesign cs2 using js?

i can able to move the normal textframe and other objects but cant do this for anchor objects.
syntex: anchorobject.move([x value,y value],undefined,true)
how to move the anchor objects?
thanks
subha

Could it be that the anchord object in question won't move because you have it set to keep within margins which is preventing the move you're requesting? I've certainly run into that.
I've also run into the situation where the object model thinks the anchored object is in one place when it is actually in another because of that same keep within margins option. In this case, a move will apparently not work because the move is invisible, it being completely outside of the margins -- although that only applies to relative moves, I think.
Dave

How to apply recommendations given by addm report

Hi Gurus
Actually the addm report of my test database is giving some recommendations and i am not getting ,how to apply those on my database.
so i am putting some data here,if anybody could give me some hint regarding that it would be of great help as i am new in dba.
Waits on event "log file sync" while performing COMMIT and ROLLBACK operations were consuming significant database time. RECOMMENDATION 1: Application Analysis, 9.9% benefit (147 seconds) ACTION: Investigate application logic for possible reduction in the number of COMMIT operations by increasing the size of transactions. RATIONALE: The application was performing 112 transactions per minute with an average redo size of 3655 bytes per transaction. RECOMMENDATION 2: Host Configuration, 9.9% benefit (147 seconds) ACTION: Investigate the possibility of improving the performance of I/O to the online redo log files. RATIONALE: The average size of writes to the online redo log files was 3 K and the average time per write was 4 milliseconds. SYMPTOMS THAT LED TO THE FINDING: Wait class "Commit" was consuming significant database time. (9.9% impact [147 seconds]) FINDING 6: 8% impact (119 seconds) ---------------------------------- Wait event "process startup" in wait class "Other" was consuming significant database time. RECOMMENDATION 1: Application Analysis, 8% benefit (119 seconds) ACTION: Investigate the cause for high "process startup" waits. Refer to Oracle's "Database Reference" for the description of this wait event. Use given SQL for further investigation. RATIONALE: The SQL statement with SQL_ID "NULL-SQLID" was found waiting for "process startup" wait event. RELEVANT OBJECT: SQL statement with SQL_ID NULL-SQLID RECOMMENDATION 2: Application Analysis, 8% benefit (119 seconds) ACTION: Investigate the cause for high "process startup" waits in Service "SYS$BACKGROUND". FINDING 7: 6.3% impact (93 seconds)
NO RECOMMENDATIONS AVAILABLE ADDITIONAL INFORMATION: Hard parses due to cursor environment mismatch were not consuming significant database time. Hard parsing SQL statements that encountered parse errors was not consuming significant database time. Parse errors due to inadequately sized shared pool were not consuming significant database time. Hard parsing due to cursors getting aged out of shared pool was not consuming significant database time. Hard parses due to literal usage and cursor invalidation were not consuming significant database time. FINDING 8: 4.3% impact (63 seconds) ----------------------------------- The throughput of the I/O subsystem was significantly lower than expected. RECOMMENDATION 1: Host Configuration, 4.3% benefit (63 seconds) ACTION: Consider increasing the throughput of the I/O subsystem. Oracle's recommended solution is to stripe all data file using the SAME methodology. You might also need to increase the number of disks for better performance. Alternatively, consider using Oracle's Automatic Storage Management solution. SYMPTOMS THAT LED TO THE FINDING: Wait class "User I/O" was consuming significant database time. (13% impact [191 seconds]) FINDING 9: 4.1% impact (60 seconds) ----------------------------------- Buffer cache writes due to small log files were consuming significant database time. NO RECOMMENDATIONS AVAILABLE SYMPTOMS THAT LED TO THE FINDING: The throughput of the I/O subsystem was significantly lower than expected. (4.3% impact [63 seconds]) Wait class "User I/O" was consuming significant database time. (13% impact [191 seconds]) FINDING 10: 3.5% impact (51 seconds) ------------------------------------ Wait event "class slave wait" in wait class "Other" was consuming significant database time. RECOMMENDATION 1: Application Analysis, 3.5% benefit (51 seconds) ACTION: Investigate the cause for high "class slave wait" waits. Refer to Oracle's "Database Reference" for the description of this wait event. Use given SQL for further investigation. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ADDITIONAL INFORMATION ---------------------- Wait class "Administrative" was not consuming significant database time. Wait class "Application" was not consuming significant database time. Wait class "Cluster" was not consuming significant database time. Wait class "Concurrency" was not consuming significant database time. Wait class "Configuration" was not consuming significant database time. Wait class "Network" was not consuming significant database time. Wait class "Scheduler" was not consuming significant database time. The analysis of I/O performance is based on the default assumption that the average read time for one database block is 10000 micro-seconds. An explanation of the terminology used in this report is available when you run the report with the 'ALL' level of detail.
regards
Richa

I'm not sure what about the recommendations you don't understand as what you posted seems quite clear. Take #1 for example:
Investigate application logic for possible reduction in the number of COMMIT operations by increasing the size of transactions.is telling you that it appears you are doing incremental commits. Are you? Can you change it if you are?
When you respond please include full version information.

How to blur (non-moving) objects in video

Hi - I've been trying for 2 hours to just blur something out of a video to no avail, using rectangle mask, then 'gaussient' filter. All I see on the screen, even after increasing the "amount" of blur to maximum setting, is a red rectangle. The blur effect is barely noticeable. I can't see what I'm doing wrong? Additional questions:
1) How do I get the layer to "stick?" Just save or export the project as an mp4?
2) How do set the start and stop of the filter? (I can change the start with the 'handle bars' on the purple bar, but not the end).
OS/X 10.9.5 (although updating to Yosemite shortly!).
Thank you for any help you can provide.
Karri

karrifromab wrote:
Hi - I've been trying for 2 hours to just blur something out of a video to no avail, using rectangle mask, then 'gaussient' filter. All I see on the screen, even after increasing the "amount" of blur to maximum setting, is a red rectangle. The blur effect is barely noticeable. I can't see what I'm doing wrong?
If I'm understanding what you're looking to do, to blur a portion of footage:
Add your footage
Duplicate it
Add your shape mask to the duplicate footage
Add the blur filter to the duplicate footage*
*Be sure to add the filter to the footage and not the mask, otherwise you'll be blurring the shape mask (making it appear feathered, instead of blurring the footage).
Your Layers List should look like this:
     Group
          Footage copy
               Rectangle mask
               Gaussian Blur
          Footage
Not this:
     Group
          Footage copy
               Rectangle mask
                    Gaussian Blur
          Footage
Additional questions:
1) How do I get the layer to "stick?" Just save or export the project as an mp4?
2) How do set the start and stop of the filter? (I can change the start with the 'handle bars' on the purple bar, but not the end).
1) I'm not sure I follow what you're looking for here. Saving the project will allow you to open it in the future to modify or export it again. Once your project is finished, you can export it as a movie or image sequence or directly to a web service. It all depends on your delivery needs.
2) You've got it right, just like how you change the start, you can do that with the end.
It sounds like either you don't have your entire project visible so you're not seeing the end of the filter. Try zooming out of the Timeline. (lower right corner is a slider, or click the Timeline area and hit shift+z).
Or the filter is applied to an object that is bigger than your project. Set the playhead to where you want the filter to end and with it selected, hit o. This sets an outpoint for the selected object. You can also adjust the timing for any object in the Properties tab in the Inspector. Twirl open the Timing brick and you'll see scrubbers for In, Out and Duration.
Hope that gets you going.

How to create transparency between objects

Hi, I'm hoping you cam assist with something that is troubling me.
I have a circle with split into 5 segments (image A).
All of the segments have a stroke (1px) of white, and a fill.
What I want is for the STROKE to be transparent so that when I position the 5 segments over a different background colour (image B) I see the colour underneath where the white stroke would otherwise appear. To recap - I would like to retain the width of the stroke, and make the stroke coloue transparent..
I've tried the Opacity setting, but this applies to the object, not just the stroke.
Your help would be gratefully received.
Thanks. I'm on CS5

Ah, I see how you drew it.
I would make a copy of your design. Remove the stroke. Draw a straight line the size of the gap you want. You'll loose the color difference (the blue) but I would make a compund path of the shutters. Position a copy of the line over a joint. Use the pathfinder to slice a piece between two of the shutters. Make another line copy, position, rinse and repeat.
While my copy of your design began as a trace, you are welcome to it if it helps.
http://www.wenzloffandsons.com/temp/shutter.ai
Take care, Mike

How to apply animation

i would like to apply animation on control through jquery like toggel between two div (panel etc) using jquery also reply me how to import library in sapui5?

Hi DaveIII,
In my experience, just using Blend is hard to accomplish this requirement, we need to use Animation to make this work.
Please refer to this article:
http://www.codeproject.com/Articles/197132/Simple-WPF-Page-Transitions
The author created a simple library to apply transition animation between pages:
Any here is a simple sample, it controls animation from code behind:
<Storyboard x:Key="slideRightToLeft"
TargetProperty="RenderTransform.(TranslateTransform.X)"
AccelerationRatio=".4"
DecelerationRatio=".4">
<DoubleAnimation Storyboard.TargetName="viewer" Duration="0:0:0.6" From="-300" To="0"/>
<DoubleAnimation Storyboard.TargetName="bordervisual" Duration="0:0:0.6" From="0" To="300"/>
</Storyboard>
Download link: http://1drv.ms/1BfUzOB
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How can I remove an object using Photoshop Elements 7?

How can I remove an object using Photoshop Elements 7?

You could probably use the 8 point garbage matte in this situation. I personally think the 8-point garbage matte is a bit cumbersome, but it should get the job done.
1. Use the Razor Blade tool to place a cut before and after the shot with the bottle.
2. Select the bottle clip.
3. Press and hold Shift + Option, then drag the bottle clip up one track. This should create a duplicate clip directly above your original clip. (I'll refer to this duplicated clip as bottle2.)
4. Locate the 8-point Garbage Matte filter and apply it to bottle2.
5. Locate the Gaussian Blur filter and apply it to bottle2.
6. Control click bottle1, and uncheck the "Clip Enable" setting from the shortcut menu. This will disable that clip.
7. Double click bottle2 to load it into the Viewer. Then select the Filter tab.
8. For the Garbage Matte filter, you'll notice 8 rows of numbers, these are the current locations for the control points, which you should be able to see in the Canvas. Start with point #1, and click the "+" button in the filters area, then in the Canvas click and drag to move the point. When you release the mouse button, you'll need to reclick the "+" button in the filters tab. Repeat these steps until you've isolated the bottle.
9. Feather the edge of the matte.
10. Adjust the Blur amount.
11. Reenable bottle1. Playback the clip and make any necessary adjustments.
Depending on your experience with Motion, you might also want to try sending bottle1 to Motion, then use Motion to control the layering.

How to apply transitions to objects Cp5?

Similar Messages

Maybe you are looking for