How to approve virtual server in STMS

I already created the virtual system for the current development server. Since this system already exist, I tried to go to SAP Systems -> Approve, this option is disable. How should I proceed?

1. The upgrade i mean is on OS and database. It is upgraded from Windows 2005 to 2008 and MSSQL 2005 to 2008, so need to install in new server.
That's OK, I got it now.
2. This means that I need to make sure that all the released transport request must be transported to production before I migrate the system copy to the new server?
No, nothing like that. You just start using new server/new DEV by configuring STMS for it and start moving the transports from new DEV --> current QAS --> current PRD.
3. Is there any problem if the SID is different from the old server? Any impact?
I don't think so. See below.
4. If no impact, all the STMS configuration follow the current development server, should be no problem, rite?
Right I think. You try one thing - this is for already existing transports --- Since new DEV is ready and if you have changed the SID then you first test a single transport test - to move a single transport from this new DEV (the transport number which contains old SID) to current QAS. Verify the results.
And as far as new generated transports are concerned (after you start development in new DEV) those will be created with new SID naming in any case.
Thanks

Similar Messages

How to join local computer to virtual server domain ?

Hi everyone,
I am new to Window Azure cloud computing. I found many articles and tutorials available online but I am kind of lost because I don't what I need to do to achieve my scenario.
Scenario: I want to migrate my servers to cloud and retire all local servers such as DC and file server. At the same time, I wish to control the network traffic to limit the clients access to Internet resources. I am not sure retiring the
all local servers is something right to do and how to do.
What I have done:
1. Site-to-Site VPN connection with Dell Sonicwall TZ205 to VNet. (I followed the route-based VPN in this document -> https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&ved=0CB0QFjAA&url=https%3A%2F%2Fsupport.software.dell.com%2Fdownload%2Fdownloads%3Fid%3D5343958&ei=ykGhVIK6GISWuASU6oHQBw&usg=AFQjCNGGS6fsuK6IHAWyQgZi5fey4xhfKg&bvm=bv.82001339,d.c2E&cad=rja)
2. Created a VM in the VNet. (I can ping the VM from computers connected to TZ205)
3. Installed active directory and configured the domain forest.
What I need to do:
1. How to join the local computers to the virtual server domain controller with S2S and P2S VPN. (Some Internet resources mentioned I need to install Connect agent in order to do this)
Extra questions:
1. Is it possible to request the clients to provide account credentials before the point-to-site VPN to VNet is established ?
2. How do I configure the TZ205 VPN router to send all the Internet traffic to the VNet instead of the ISP gateway? The computers connected to TZ205 firewall router public IP address doesn't change to the VNet gateway IP.
Thanks for your time reading my questions. It will be helpful if you can provide me some useful links or ideas.
Sincerely,
Chee-Kian

Greetings!
I assume there is connectivity between on-prem device and DC on Azure VM.
You can set the Internal IP of the DC as DNS on the on-prem device and trying joining it to the existing domain. Please note to use S2S VPN.
It is not possible to provide user credentials while connecting to vNet via P2S VPN. It's a certificate based authentication (which is so by design).
With regards to your query to send all internet traffic to vNet instead of ISP gateway. Please refer to Forced Tunneling:
http://msdn.microsoft.com/en-us/library/azure/dn835140.aspx
Hope this helps.
Thank you,
Arvind

How to specify Host Server for Replicated Virtual Desktops within RDVH Collection

My question about how to specify Host Server for Replicated Virtual Desktops within Collection.
I know there is a aswered thread on this, but that solution (wait a week) didn't work for me.
So i have 2 servers, RDS01 and RDS02 with both 15 Hyper-V VM's and replicating to eachother. That part works fine.
Now I wanted to make it easy for my users I build a Connection Broker: RDCB
All went fine in that setup, but when I want to add the existing VM's from RDS01 and RDS02 to the collection it just radomly adds running ones and replicated ones.
So both RDS01 and RDS02 have 15 VM's running and 15 replica's in stopped state, but when I look in my collection, it says RDS01 has 23 and RDS02 has 7 VM's. When I add them all, I see he wants to add a lot of stopped states replica's from RDS01 instead of
the running ones from RDS02.
How can I specify which one he should use? Or need I disable replication first, setup the whole RDCB collection thing, and then turn replication back on? Or does Hyper-V replication not work at all when used in a collection?
I hope someone can help out here. I'm googling and trying for 1,5 week now, but i can;t get it right.
Thanks in advance.

Hi Robin,
Thanks for your patience.
After you removed Replication from 1 machine on both RDS01 and RDS02, please restart that machine. After that, please add this machine to the RD collection again to test how the issue goes.
As we know, Hyper-V Replica provides asynchronous replication of Hyper-V virtual machines between two hosting servers. It is simple to configure and does not require either shared storage or any particular storage hardware. Any server workload that can be
virtualized in Hyper-V can be replicated. Replication works over any ordinary IP-based network, and the replicated data can be encrypted during transmission. Hyper-V Replica works with standalone servers, failover clusters, or a mixture of both. The servers
can be physically co-located or widely separated geographically. The physical servers do not need to be in the same domain, or even joined to any domain at all.
Currently, would you please add only running state VMs to the RD CB collection? And would you please capture some screenshots of the error message? Thanks very much for your cooperation.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How to start virtual OVM Manager and restore server pool which hosts it?

It had to happen... the day I migrate our OVM Manager from an ESX host into an Oracle VM, we have a massive NetApp outage, and everything fails to come back. As a result of having lock errors when trying to start any VMs I noted on the forum various solutions and ended up following the steps concerning stopping ovs-agent and removal of /etc/ovs-agent/db/* on all the servers. Next I re-added the repo to all the servers using repos.py, but of course now none of the servers are in a pool so the --list command shows them as [R] rather than [*], and the /OVS directory is not yet mapped. So the next stage, according to the instructions which I am following, describes using the 'Restore' option in the OVM Manager GUI. Given that /OVS is not mounted and all of the servers are now config-less, I can't see how I can start the OVM Manager VM to get to the aforementioned "restore" option...
Thank Jeebus I kept the ESX copy of OVM manager on (but powered down), as I was able to fire it up and do the restore, and now everything is hunky dory. However, this is our Dev platform and I was going to build the Prod platform and deploy OVM Manager straight into the OVM architecture via the template, rather than having it on ESX, but this issue on the Dev install has made me think twice about the mobius nature of managing the VM architecture from within the VM architecture...
I am assuming I am missing some sort of commandline knowledge, so... given:
- empty db directory
- root repos [R] on all servers
- as yet unmapped /OVS
...how to get the server pool up and get something back into /OVS, and then start my OVM Manager VM so I can 'restore'? Is it even possible? because if it isn't, I'll be blowed if the Prod OVM manager is going to get deployed like this...
And no, there's no money in the budget for extra tin just to sit there running the OVM Manager and nothing else.
TIA
Kev

user12474530 wrote:
Still nobody seems to know of how to create a server pool on the CLI (outside of OVM Manager) though...There is no way to create a server pool on the CLI without Oracle VM Manager. You either need to use the Web UI of the Manager, or use the ovmcli command-line tool. Both of those require Oracle VM Manager to be running.
However, once the Pool is created, you do not need the Manager to be running to perform simple tasks like starting/stopping guests. That can be done with the xm command-line tool.
I agree with you about running VM Manager as a guest of the Oracle VM Server: I actually don't recommend this in production, unless you have at least two Server Pools. Then you can have the Manager of Pool A hosted by Pool B and vice-versa. Most often however, I recommend a completely independent Manager machine, either physical or hosted on a separate virtualization stack.

How to restart a virtual server in WS7

Does anybody know host restart a virtual server without restarting the whole instance?
Thanks.

you can run 'bin/reconfig' - this will make any changes (that does not require a restart) available to the running server (this includes all virtual servers configured within this server instance) without requiring a restart - i mean without any downtime
no, there is no way to make dynamic reconfig work only for a single virtual server. but i guess, what you care most is - ability to modify a setting for a virtual server without disturbing other virtual servers - 'bin/reconfig' is probably what u r looking for.

How do I set up a virtual server with a time capsule?

I am trying to set up a wireless camera in my house to be viewed from away from the house.
I cannot seem to figure out port forwarding/virtual serving on the settings of my time capsule. I had no issues doing it with my old router. Does time capsule have that abilty?
I have Macs and PCs,

I figured it out.

How do you configure AMS to stream flash files from my dedicated virtual server?

I would like to stream files from my dedicated virtual server instead of my computer. Is it possible to configure AMS so that I can do this? Any help would be appreciated. Thanks!

See screenshots:
Nancy O.

Need to create a virtual server and give its access to another admin

Dear Sir,
I am a new admin and have 5 Blade server "HP ProLiant BL660c Gen8".
I access these servers through HP enclosure.
I have to install Hyper-V on server 1 which consisted of the OS windows server 2012 R2 Datacenter edition.
I created a plan to create 5 Hyper-V VM's on the physical server and I requested the IT department network Admin that I want these 5 VM's to able to connect to each other.
The network Admin created a Trunking configuration on the physical server and after this setup he provided me Hyper-v node IP address and 5 more IP addresses for the 5 Hyper-v VM's.
Now it was left to me to Add the Hyper-v role and create 5 VM's.
While Adding the Hyper-V role, I was asked in the middle of the setup to add the network adapter for
connecting to external network.
I went inside the network connection settings and I see one network adapter "Microsoft Multiplexer"
which had the IP address of the Hyper-V node which was given to be me by Network Admin.
Besides this I found following Network Adapter: (Mgmt,Trunk):(Mgmt A, Trunk A);(Mgmt B, Trunk B) =Total
6 Network Adapter out of which only "Mgmt" was configured with the IP address of the Hyper-v node given by my Network Admin. Remaining all other Network adapters IPV4 configuration
was unchecked except "Mgmt"
So I selected the "Mgmt" connection while Installing the Hyper-v role
SO I chose this Network connection for adding the Hyper-V role.
My question: Did I chose the correct Network Adapter.
After doing this I created a VM-1 and tried to assign the IP address given by the Network Admin. But the network Admin did not provide me the default gateway so I used the deafult gateway according to the IP address and used the last digit as "1"
like a general installation.
Now my question is: 1.How can I use this VM to be used as a Virtual server?
2. I would like to open this VM through my browser by entering the IP address of this VM-1. How can I do this?
Because I access my physical server through the IP address. SO in the similar way I want to access this VM-1 through the IP address
OR is there any alternate way to access this VM-1 separately.
My Requirement: I need to give VM-1 access to another admin to Install his application on it. SO how to give him to access this VM directly?
This is my main query.
Waiting for your reply.
Thanks & Regards,
Ahmed

Jawin, Jacob, etc.. are fine for creating COM clients but COM servers is a totally different story. I suspect you'll either have to write your own JNI or get out your C/C++ compiler.

Archlinux on Microsoft Virtual Server - installs but doesn't boot

Hi all,
I'm trying to sneak Arch into our organization, but as we're very Windows-focussed it may take some time. I thought I would be able to install it as a virtual machine on our Virtual Server, but I haven't had any luck.
The system seemed to install fine, but when I restart the machine and take out the virtual CD it just sits there with a blank screen, but using 97% CPU.
Here's how I installed the system:
Physical machine: Core II Duo 2GHz running Windows Vista 32-bit, with 2GB memory and a 120GB IDE drive.
1) Setup a virtual machine - it has 256MB memory, and a 100GB dynamically-expanding IDE virtual hard disk.
2) Attached the Don't Panic 2007.08 BASE ISO to the Virtual Machine, and started her up.
3) Started the installer with arch ide-legacy. This is because I've run through this install a few times now and without this option it complains that it can't read from /dev/null a lot and that it has trouble writing to VHD.
4) Did an auto-prepare and selected all of the defaults to partition the virtual hard disk.
5) Selected all of the base packages and installed them.
6) Did the "configure system", and left everything as the defaults except setting the root password.
7) Installed the kernel, again leaving the defaults in the config file.
8) Installed the bootloader. Last time I used GRUB, but it sat there saying it was installing for over 2 hours. This time I tried LILO and it installed in less than a few seconds.
After all that was done I exited the installer and did a reboot. Now it sits at 97% CPU usage constantly and shows nothing but a blank screen. Using ALT+F1-F5 shows nothing.
Microsoft Virtual Server has support for the Red Hat and other distributions so I would have expected ArchLinux to work. Has anyone else had success in getting Arch to run on Virtual Server? And is there anything I did wrong in my installation?
Cheers,
Paul

Well, according to this virtual pc 2004 supports archlinux 0.7.1 and 0.7.2 .
They claim virtual server 2005 uses the same core as virtual pc 2004 , so it should work.
Try installing with one of the previous isos, see ftp://ftp.archlinux.org/iso .

How to get Windows Server 2012 trial license key?

How to get Windows Server 2012 trial license key? I'm trying to install WinServer 2012 Trial on a VMWare Workstation 9. I'm asked for the product key during set up. If I ignore putting in the key (since I don't have one) The install fails stating no valid
key. I tried this with Oracle's Virtual Box and the same thing happens. I tried using Majic JellyBean to find the key, but that only works on pre-installed OS. A Technet article said to use aaaa-bbbbb-ccccc-ddddd etc. in the spaces. That doesn't work either.
Articles all over the web seem to have other people in the same boat. Please help :)

Download the trial version from here -
http://www.microsoft.com/en-us/server-cloud/evaluate/trial-software.aspx It does not require a key. If the software is asking for a key, it is not the trial copy. Where did you get your copy?
.:|:.:|:. tim

How to figure out server has capacity to install OEM 10 Grid control

How to figure out server has capacity to install OEM 10 Grid control
Hi Experts
I have HP_UX 11.11 server which has 1 instance on it with version 10.2.0.1.0.
Now I would like to install Grid control with a separate instance for repository.
I was told I would need 2 GB Ram for OMS and 2 GB Ram for instance.
Now how do I figure out if my server has enough resources from Ram perspective
Following is output from top and vmstat
1. for top it says 3045556K free , now is this free memory virtual(real +swap) or real?
2. as per top I only have free 3GB(3045556K) , so does that mean I can not have OMS & repository on
this server ?
3. In vmstat I see free memory as 762335
in man it says free - Size of the free list
what does this mean, how much is my free meemory ?
4. For OMS I read - It is a J2EE application that is installed and deployed using Oracle
Application Server
Now when I look at top I see these processes
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Does oasadm user means Oracle application server ? If yes does it mean I will not
need 2GB for OMS ?
cov6817:plmbomdv $ vmstat 2 5
procs memory page faults cpu
r b w avm free re at pi po fr de sr in sy cs us sy id
1 0 0 3348627 762335 69 11 0 0 0 0 0 1014 4916 671 12 1 87
1 0 0 3348627 762284 17 0 0 0 0 0 0 1040 10514 886 1 0 99
1 0 0 3330668 762284 10 0 0 0 0 0 0 1031 7820 872 0 0 100
1 0 0 3330668 762284 9 0 0 0 0 0 0 1033 6173 873 0 0 100
1 0 0 3330668 762284 5 0 0 0 0 0 0 1029 5468 891 1 0 98
cov6817:plmbomdv $ top
System: cov6817 Wed Jul 18 08:48:43 2007
Load averages: 0.02, 0.04, 0.03
267 processes: 215 sleeping, 51 running, 1 zombie
Cpu states:
CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS
0 0.03 0.0% 0.0% 0.2% 99.8% 0.0% 0.0% 0.0% 0.0%
1 0.03 0.6% 0.0% 0.4% 99.0% 0.0% 0.0% 0.0% 0.0%
2 0.02 0.6% 0.0% 0.2% 99.2% 0.0% 0.0% 0.0% 0.0%
3 0.01 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
avg 0.02 0.4% 0.0% 0.2% 99.4% 0.0% 0.0% 0.0% 0.0%
Memory: 8733312K (7157492K) real, 15353696K (13382776K) virtual, 3045556K free Page# 1/10
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND
0 ? 26521 oasadm 152 20 1517M 1141M run 3:49 2.53 2.52 java
0 ? 3377 oasadm 152 20 1657M 1276M run 54:49 1.88 1.88 java
Thanks a lot
New DBA

how much is my free meemory ?Do you have kmeminfo command installed?
4. For OMS I read - It is a J2EE application that is
installed and deployed using Oracle Application Server
s oasadm user means Oracle application server ? If
yes does it mean I will not need 2GB for OMS ?Even if that java vm is an instance of Oracle AS (OC4J), the Grid Control installs a separate instance of AS. The choice to install OMS app to any existing AS home does not exist in any version I know.
Find out what more is running on the box and how much resources (i.e. RAM) those apps are configured with.

Getting Virtual Server ID within OS running on guest VM

Hi,
If I login to OVM Manager and look at the info that is shown for a Virtual Server (under the info tab), there is a ID field.
I want to get this ID from within the OS running on one of the guest VMs. Could you let me know how can this be done? Which command can I use?
Regards,
Vinay

I have never installed the EM agent on Dom0. I always taken the approah of install in the EM agent on the guest and then attaching the VM Manager to EM. Thus, you get the performance stats of the guest themselves and the performance stats of the VM Servers themselves. I know it works. I'm doing it now. I do have collect issues from time to time and its more prevalent on some hardware than it is others.

Best practice steps for virtual server

Hello,
I need help in below questions. Please help.
Q1) What are the best practice steps to create a VM with Hyper-V?
Q2) What is the best practice for virtual network cluster?
Q3) What are the domain controllers? and how to upgrade it from 2003 domain to 2012 domain?
Please help me to answer above questions. I am new to networking server side. Please guide me step by step. Any help is much appreciated.
Thanks.
chirag

Please post your questions in the appropriate forums.
This forum is for the specific product Virtual Server 2005.
For Hyper-V related questions, use the Hyper-V forum:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?forum=winserverhyperv
For server questions please use the server forums:
http://social.technet.microsoft.com/Forums/windowsserver/en-us/home?category=windowsserver
Microsoft has a lot of documentation, have you read it yet? Googled?
Clustering:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7173caf4-a5aa-4426-a16b-592a6e6714ec/windows-server-2012-hyperv-cluster-step-by-step?forum=winserverhyperv
http://www.bing.com/search?q=hyper-v+cluster+2012+r2+step+by+step&src=IE-SearchBox&FORM=IE11SR
Domain upgrades:
http://technet.microsoft.com/en-us/library/hh994618.aspx

Business connector on Virtual Server

Hi All,
I need a urgent help to know, if there are any disadvantages if we setup a Business connector environment in Virtual Server rather than a Physical server?
The situation is, currently I have business connector working on Physical server, for which a Warranty is reach end of life and no further support to the hardware is possible from the mother company.
Hence we have a plan of moving the Business connector in the physical server to a new virtual server provided by our infrastructure team as virtual servers are less costlier than physical server. Hence I would like to know how good to choose Virtual Server for business connector.
Also, do any one can suggest what is the best way of approach would be, to move the existing Business connector server operations to new hardware i.e. is it fine to do pure system copy and will it work? or else do I need to redo from installing the BC software and configuring it manually.
Thanks,
Bindu

Hi Bindu,
we are running all of our BC servers on VMWare images. Works perfectly. You are better off installing the BC from scratch and remember if you are installing it onto Windows XP or alike you should select the Windows 2000 compatibility mode both for installation as well as when running it. This will allow it to run just fine.
Be aware that BC 4.8 is due to be released soon and that will give you a supported, JVM updated version of BC for Windows and Linux. Currently all JVM versions are un-supported for previous BC versions.
If you use the same name and IP for your virtual server than what you had for the previous physical server you should not see any changes in your configs. Again, we have moved these from physical to virtual doing just that and it all worked well.
If you don't care about support at this point in time then you can also run the whole lot on a newer JVM, though if this is feasible or necessary is up to you.
Cheers
Kalle

Business connector server on Virtual Server

Hi,
Currently our 4.6 release Business Connector servers running on Windows NT Operating system. We would like to upgrade them to BC release 4.7 on Windows 2000 operating system on Virtual servers.
Are there any known issues/disadvantages if we install Business connector servers on Virtual Server rather than a Physical server?
These virtual servers will be in the same domain as that of SAP systems. Host names of the upgraded Virtual servers will be same as the current production BC hosts.
Thanks,
Srini

Technical Data
These functions are:
Changed, new, deleted
For Release
   Software Component
·        Component: SAP Business Connector (external)
·        Release: 4.7
Assignment to Application Component
BC-MID-BUS (SAP Business Connector)
Country Setting
Valid for all countries
Use
The following information provides you with an overview of the new features in SAP BC Release 4.7: It also tells you about incompatible changes that you need to know about before performing an upgrade.
SAP BC 4.7 is based on Integration Server 4.6 from webMethods. However, the SAP BC elements in Integration Server 4.6 have been redeveloped (see below for details).
Features
Additional Functions in SAP BC Developer
As well as SAP BC Administrator GUI, you can now use SAP BC Developer to perform typical development tasks. You do not need administrator authorizations in SAP BC Developer to do this. For example, with SAP BC 4.7 you can use SAP Lookup to generate elements for the Developer. This enables you to gather information about function modules, structures (tables), BAPIs and IDocs in an SAP system, and then generate outbound maps or records for these objects directly.
SAP BC Developer contains a new menu, SAP, which contains the following functions:
·        Look up a function module and generate an outbound map
·        Look up a structure definition and generate a record.
·        Lookup a business object.
·        Look up an IDoc and creating a Record.
·        Browser for Function Maps.
In addition, the Developer now also supports the following actions:
·        Generate an SAP inbound map if you want an SAP system to run a service in SAP BC.
·        Generate an SAP outbound map to execute a function module in an SAP system.
·        Generate a record based on an SAP ABAP Dictionary structure.
·        Generate a record based on an SAP IDoc.
SAP BC Developer now also supports a proxy bypass list. This means that you no longer need to define whether a connection runs through a proxy; instead, the bypass list performs this task.
New Public Services on SAP BC Server
pub.string:gzip
Compresses the specified input string and generates a check total (optional). For measurements or for statistical purposes, the lengths of the zipped and unzipped strings are provided as output.
·        pub.string:ungzip
Decompresses a specified input string, which was compressed with pub.string:gzip, and verifies the check total (optional).
·        pub.string:numericParse
Analyzes a number in accordance with a given number pattern.
·        pub.math:randomLong
Generates a pseudo random number and sends its string representation in a pipeline variable. You can use this number as a universal identifier with an acceptable level of security, as long as it is used in non-distributed scenarios and for a small number of variables.
·        pub.file:head
Shows the start of a given file.
·        pub.file:tail
Shows the end of a given file.
·        pub.flow:sleep
Puts the current service into sleep mode for the specified period (in seconds).
Restructuring of the WmPartners Package
The WmPartners package in SAP BC Server has been completely restructured and now offers the following enhancements:
·        Improved status information in the messages displayed in the Transaction Store and the Audit Log. This solves a range of problems, such as incorrect status information being displayed by IDocs.
·        Improved search and sort options for transactions in the file system of the Message Store. In the Transactions menu, SAP BC Administrator GUI offers you a new option, Message Store Query Settings, which enables you to select and delete transactions. In Release 4.7, the Message Store can also be displayed on separate pages, which makes it easier to edit large numbers of transactions.
·        Improved search and sort options for Routing Rules. In the Routing Rules menu, SAP BC Administrator GUI offers you a new option, Routing Rule Filter Settings, which enables you to restrict the number of routing rules that are displayed, and to sort the display. The filter accepts all combinations of characters, and the placeholders '*' (string of characters) and '?' (one character). This makes it easier to sort and search for routing rules, especially if you need to process a large number of communication partners and message types.
·        Forwarding the "Confirm Event" tRFC (triggered by an SAP system) to the next receiver (for the following transports: B2B Service, ALE (R/3 IDoc), and XML (only if another SAP BC is the receiver)) and triggering "Confirm Event" from an external client. Both of these cases can be significant if the final receiver is an SAP system. In this case, "Confirm Event" removes the transaction ID from the ARFCRSTATE table, which can improve system performance significantly when a large number of tRFCs are being processed.
Support for Distributed Statistic Records (DSRs)
SAP BC has supported the generation of DSRs since Release 4.7 DSRs enable you to monitor the performance of each SAP system and its components. In this way, you can check how much system load is produced by each individual component, and how many resources are being used. This enables you to identify "performance leaks" and optimize system performance.
The DSR support integrated in SAP BC also allows you to measure the total retention period of a process in SAP BC. To evaluate the DSRs, you require additional SAP software, including specific versions of the SAP Solution Manager, and the RFC Library. The exact requirements are still being defined.
The details will be published in SAP Note 620418. You can find a link to this SAP Note on the SAP BC download page at http://service.sap.com/sbc-download.
SAP BC Server Core Enhancements
·        Reverse Invoke
The reverse invoke protocol has been enhanced and now allows you to forward more information, such as IP addresses.
If, for example, an application fails because a connection is broken, and other working connections exist, the connection is checked using a ping.
From now on, the internal server can open or reopen a defined number of connections, if necessary.
A document is generated for any exceptions on the internal server.
·        Email Listener
New Features in the Email Listener
¡        Reprocessing of invalid mails for IMAP Server
¡        Processed mails selected as "unread" if they have not been deleted.
You can also specify whether mails with exceptions are deleted or not.
·        Update Manager
The Update Manager manages fixes and patches for the upgrade of an SAP BC Server. Previously , the Update Manager allowed a fix to set other fixes as obsolete, using the updateVoidList field in the update.cnf file of the fix. An obsolete fix is not shown in classpath, but up to now the Update Manager has not been able to give a fix in classpath priority ahead of this other fix. The Update Manager has now been enhanced to support these fix priorities: The update.cnf file in the fix now contains an updatePrecedeList field.
Incompatible Changes
SAP BC Delivery Without JVM
The Windows Version of SAP BC 4.7 is no longer delivered with a Java Virtual Machine (JVM). The SAP BC 4.7 Installation Guide describes the JVMs that are supported.
See also
For more information, see the documentation on the SAP Business Connector, under
·        http://service.sap.com/connectors (SAP Business Connector ® SAP Business Connector in Detail ® Documentation).

How to approve virtual server in STMS

Similar Messages

Maybe you are looking for