How to aquire data of Bluetooth device connected to USB port by using LABVIEW?

I am using LabVIEW2010 and want to acquire data of Bluetooth device which is connected to USB port while i am using OS xp3
THANKS

Does it have a driver to use it as a serial port?
Say hello to my little friend.
RFC 2323 FHE-Compliant

Similar Messages

"Device connected to USB port has malfunctioned and is not recognized"

When I hooked my nano up to my computer today, the screen went black with a silver apple icon on it...it's still all lite up and on...but it won't change from that screen.
And my computer says, "Device connected to USB port has malfunctioned and is not recognized", so it won't show up in iTunes.
What do I do?? Thanks.
Windows

iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.

HT202731 Unstable operation when 2 or more USB devices connected to usb port on a MacBook Pro running Yosemite

I have tried connecting a number of devices to my MacBook Pro but I have found if I try to connect 2 or more using either usb ports or a usb hub the computer reports 'disk not ejected properly' and sometimes it will fail to recognise the device and remove it from the desktop or it stalls operation and I have to turn the computer off at the power button.
I have tried erasing the hard drive and reinstalling the operating system.
I have done various types of reset suggested by apple support.
The computer has been to an Apple dealer who has tested the hardware but found nothing due to the intermittent nature of the problem.
I have operated the computer with only the software originally installed on it present.
Could it be possible that a virus could be present on the usb devices I am trying to connect?
My computer is a MacBook Pro (13-inch, Mid 2012)
Processor 2.5 GHz Intel Core i5
Memory 4 GB 1600 MHz DDR3
Startup Disk Macintosh HD
Graphics Intel HD Graphics 4000 1024 MB
Operating System X Yosemite 10.10.1
Devices I have connected to USB ports all USB 3.0 compatible in a variety of combinations:-
7 port superspeed USB 3.0 hub (powered).
4 port Inateck USB 3.0 portable hub (not powered).
Buffalo ultra portable 500Gb USB 3.0 hard drive.
Seagate Expansion portable 500Gb USB 3.0 hard drive.
Seagate Expansion desktop 2Tb USB 3.0 hard drive (powered).
Seagate Expansion desktop 3Tb USB 3.0 hard drive (powered).
ScanDisk Cruiser Edge 16Gb USB stick.
ScanDisk Cruiser Edge 32Gb USB stick.
Hewlett Packard 16Gb USB stick. (This causes an instant crash now.)

Why?
- Because when I'm editing/ rendering lots of HD video everyday, I don't want to share system resources between virtual machines... I want the entire system's resources devoted to what I'm doing.
- I don't want to spend anymore money than I have to in order to buy one of the faster virtual systems. Not to mention, I've had a bad experience with Parralels in the past and I'd rather not use one again.
- I really don't want to clutter up my system anymore than I have to for a project that's only going to take a few weeks.
- I don't mind swapping hard drives... it takes two minutes, and I have an empty ssd just sitting on the shelf.
So, back to my original question. Can I just swap the computer's drives, then install Ubuntu on the second drive and be good to go without any harm to my MacBook Pro or OSX on the other drive (which wouldn't be connected when Ubuntu is running)?
Thanks.

How to get data from bluetooth device?

Hi,
I'm trying to create an application in which I want to communicate with another bluetooth device for data. As I know using GameToolKit framework we can communicate with another iPhone or iPod device, but in my application I want to get data from different bluetooth device.
Is it possible in iphone SDK? If yes, can somebody help me out?
Thanks.

avinash.ng wrote:
manage to get data from other devices via the bluetooth ?
You might want to look over the External Accessory framework, released with 3.0.
...keep in mind, however, that the only way to communicate with other BT devices via the EAF is if they are in the 'Made for iPod' accessory program. http://developer.apple.com/iphone/program/accessories/
However again.... Even though they communicate through standard BT connections, accessories need special hardware in order to process the data stream coming from the iPhone / iPod touch. Unfortunately, this may mean that any idea of communicating with generic BT devices won't work on iPhone OS 3.x.
If the devices you want to talk to are Bonjour-discoverable via WiFi, they don't need to be part of the MfI program. Does that sound like your case?
Also you may want to keep in mind that 3rd. party devs in the future may release dongles that connect via the 30-pin dock port, providing access to existing BT devices. If said devs opened their communication protocols, that might enable the goal of communicating with said devices.

How do I browse & play .mp3 files from a USB flash drive using Labview 8.0?

I'm a tester & want to test USB flash drives connected to PC.
I want to browse the file system & playback the audio files, .jpeg files etc in the USB drive. I've Labview 8.0. When I searched for some examples or VIs which can detect the USB flash drive, couldn't find any. So if you could point me in the right direction, I can find a solution to my problem.
Thanks.
Solved!
Go to Solution.

You probably won't find specific examples for this. A USB flash drive is mounted by the OS and appears as a new memory storage device to all software on the PC, including LabVIEW. You can certainly write a LabVIEW program to open files on the stick and play/run them but I would create a VI that wrote files to the stick and then read them back and checked them for bit-level errors. Keep in mind that your OS might be doing parity checking under the hood which would make your test rather meaningless.
BTW, testing memory by looking at pics or listening to MP3s would be useless of course. A human can't see or hear bit-level errors in a high bandwidth data stream.
Using LabVIEW: 7.1.1, 8.5.1 & 2013

How can I rename a Bluetooth device on my iPad?

How can I rename my Bluetooth device on my iPad? I just bought the same model of a Bluetooth speaker that my daughter uses and since I babysit for her often, I want to be able to connect to either device. And I want to be able to distinguish by name each device.

On your iPad you cant. There are no settings/preferences in the bluetooth section.

How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V

How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V
I would like to get some resources about detailed information on the subject above.
Any help would be greatly appreciated.
Thank you,
carloss

check this
Hyper-V in Windows Server 2012 R2 Client Hyper-V Enhanced Session Mode in Windows 8.1
Starting with Hyper-V in Windows Server 2012 R2, Hyper-V can now redirect local resources to a virtual machine session through Virtual Machine Connection tool. The enhanced session mode connection uses a Remote Desktop Connection session via the virtual
machine bus (VMBus), so no network connection to the virtual machine is required
https://technet.microsoft.com/en-us/library/dn282274.aspx

How do i add a bluetooth device to my mac? there is no " " button in my bluetooth preferences and turning the devices to discover mode doesn't work

How do i add a bluetooth device to my mac? There is no " +" button in my bluetooth preferences and turning the devices to discover mode doesn't work

The Bluetooth setup assistant should "find" a device in range when that device is turned on. What are you trying to add?
Wireless input devices: Bluetooth frequently asked questions ( How do I add or remove a wireless device to or from my Mac (pairing or unpairing)?)
Barry

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?

Why can't there be a simple utility that shows me which device connected to my Airport is using how much of the bandwidth in a simple graphical or stats format without requiring me to be a level 10 Black Belt or Chuck Norris' paternal tooth fairy?
I need to see who is consuming the most bandwidth and limit that user/device. A very simple and dare I say it, legal, moral, and normal wish.

They are not overloading the Airport. They are overwhelming the capacity of your Internet connection.
No. It's not "shared equally". That's not how packet switched networks function.
Most consumer grade routers do not have the ability to restrict bandwidth use on a per machine basis. You need relatively expensive (but readily available) equipment to do that.
How many people are on the network? It can't be that hard to hunt them down.

Disable bluetooth "Device Connected" and "Device Disconnected" notification

Hi there.
Is there a way to stop the bluetooth "device connected" and "device disconnected" notification from appearing in the middle of the screen?
Logically this notification should be optional and disabled out of the box just like other hardware notifications (network, printer, hard disk etc..).
Cheers
Marty

Does it have a driver to use it as a serial port?
Say hello to my little friend.
RFC 2323 FHE-Compliant

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

Hi - my 2011 Mac Pro no longer recognizes devices in the usb ports, I've been told it's the logic board. is there a way I can connect the iomega external hard drive to it through the firewire or thunderbolt ports?

jrburrows wrote:
Ok, fair enough. But since Job's death - Apple's control on leaks has been terrible. I got the new iPhone, and I like it - but it hasn't made nearly as big as an impression as previous ones. Because of the vast ammount of leaks. With the iPad mini leaks, it's 99% sure to come out next week.
Apple uses many manufacturers and it's massive also websites prefer to report on Apple whether true or false because it brings more hits.
Amd by "others" I meant other people on iPads - not other devices/manufacturers. It's possible to do so, I just want to know how. I honestly don't think we'll ever be in a Post-PC era until all tablets allow us to use USB in the way computers do.
No, USB is not the future, you missed the memo about cloud and wireless computing?

How to upload data from excel to SAP and options to be used

How to upload data from excel to SAP and options to be used
thank you,
Regards,
Jagrut Bharatkumar shukla

Hi Jagrut,
You can use gui_upload.
chk the sample program mentioned below.
REPORT ZFTP .
DATA: BEGIN OF I_FILE OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE.
DATA: BEGIN OF I_FILE2 OCCURS 0,
DATA(2000) TYPE C,
END OF I_FILE2.
DATA: W_COUNT TYPE I.
PARAMETERS: P_FILEN TYPE STRING,
P_FILE2 TYPE STRING,
P_NUM(4) TYPE N..
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILEN.
PERFORM F_FILE_GET USING P_FILEN TEXT-G01.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE2.
PERFORM F_FILE_GET USING P_FILE2 TEXT-G01.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = P_FILEN
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
tables
data_tab = I_FILE
IF SY-SUBRC <> 0.
MESSAGE E024(Z1).
ENDIF.
LOOP AT I_FILE.
W_COUNT = W_COUNT + 1.
IF NOT W_COUNT > P_NUM.
MOVE I_FILE TO I_FILE2.
APPEND I_FILE2.
ENDIF.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
BIN_FILESIZE =
filename = P_FILE2
FILETYPE = 'ASC'
APPEND = ' '
WRITE_FIELD_SEPARATOR = 'X'
HEADER = '00'
TRUNC_TRAILING_BLANKS = ' '
WRITE_LF = 'X'
COL_SELECT = ' '
COL_SELECT_MASK = ' '
DAT_MODE = ' '
CONFIRM_OVERWRITE = ' '
NO_AUTH_CHECK = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
WRITE_BOM = ' '
TRUNC_TRAILING_BLANKS_EOL = 'X'
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
IMPORTING
FILELENGTH =
tables
data_tab = I_FILE2
FIELDNAMES =
*& Form F_FILE_GET
text
-->P_P_FILEN text
-->P_TEXT_G01 text
FORM F_FILE_GET USING L_FILENA L_TEXT.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = ' '
MASK = ',.,*.TXT.'
MODE = 'O'
TITLE = L_TEXT
IMPORTING
FILENAME = L_FILENA
rc =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Reward if helpful.
Regards,
Harini.S

Mac pro does not recognize ipad device when connected via usb port, suggestions?

mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions? itunes 10.7

Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
The most likely issue: Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

Been trying to use an external memory card reader with my macbook air- connecting via usb port, air does not recognize device nor the microSD card from my gopro - help

Been trying to use an external memory card reader with my macbook air… connecting via usb port, air does not recognize device nor the microSD card from my gopro … help

Some external ones do not work with the Mac's although most do. There are some driver compadibility issues with Mavericks, so I would wait for an update.

TOUCHSMART 520 PC NOT RECOGNIZING DEVICES IN THE USB PORT.

When I plug any devices into the USB port, they are not recognized. The computer acts as if they are not there. The devices (MP3, camera, Garmin, etc) turn on, so I know that they are connected. The Printer and wireless mouse that connect through the USB port still work and I have tried changing ports...it doesn't make any difference. Even if I try to search for thr device, the computer does not find it. Any ideas?

Hi DJOBES,
Welcome to the HP Community, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
Sorry to hear about your USB issues. I will be happy to assist you but I need some additional information; what is your operating system and product number?
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

How to aquire data of Bluetooth device connected to USB port by using LABVIEW?

Similar Messages

Maybe you are looking for