How to archieve the bpm 11g process
I have customer which have a lot of process instance,before delete the finish and expire process instance,they want to archive them,such as archieve the finish process before some date(11.30),I want to ask do we have some way to support this function?
Thanks a lot!
This feature has been disabled in version 11g and to do some purging of instances of BPM (SOA Suite) should ask a DBA to take these actions within the database.
For more information see the documentation:
http://docs.oracle.com/cd/E17904_01/integration.1111/e10226/soaadmin_partition.htm
Similar Messages
-
How To Configure Oracle BPM 11g Process Portal on Oracle WebCenter Spaces
After setting the file process-portal-install.properties and have set the path environment variable to the ANT.
When i execute a command ant -f install.xml i can see the next error
[exec] Updating deployment targets for the datasources...
[exec] This Exception occurred at Tue Dec 18 14:32:49 EST 2012.
[exec] javax.management.InvalidAttributeValueException: Array has at least one null element
[exec] Problem invoking WLST - Traceback (innermost last):
[exec] File "/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/wc-post-install.py", line 253, in ?
[exec] File "/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/wc-post-install.py", line 112, in updateTargets
[exec] File "", line 581, in set
[exec] File "", line 1847, in raiseWLSTException
[exec] WLSTException: Error occured while performing set : Error setting attribute Targets : Array has at least one null element
[exec] Use dumpStack() to view the full stacktrace
[exec]
BUILD FAILED
/opt/oracle/Middleware/Oracle_SOA1/bpm/process_spaces/install.xml:207: exec returned: 1
Someone know the cause of this error??
Thanks in advanceHi;
I belive you can follow this thread if you insist to make 11g installation on ubuntu. But as installation documents refer Ubuntu is not a certified platform yet for 11gr2,you can find details on below docs. (I suggest use OEL platform which is free and certified wiht Oracle 11gR2 db)
http://download.oracle.com/docs/cd/E11882_01/install.112/e16763/pre_install.htm#CIHFICFD
Certified platform for 11gR2
On Linux x86:
Asianux Server 3 SP2
Oracle Enterprise Linux 4 Update 7
Oracle Enterprise Linux 5 Update 2
Red Hat Enterprise Linux 4 Update 7
Red Hat Enterprise Linux 5 Update 2
SUSE Linux Enterprise Server 10 SP2
SUSE Linux Enterprise Server 11
On Linux x86-64
Asianux Server 3 SP2
Oracle Enterprise Linux 4 Update 7
Oracle Enterprise Linux 5 Update 2
Red Hat Enterprise Linux 4 Update 7
Red Hat Enterprise Linux 5 Update 2
SUSE Linux Enterprise Server 10 SP2
SUSE Linux Enterprise Server 11
Regard
Helios -
How to increas the max user process number in Solaris 11?
Hey
Could anyone told me how to increas the max user process number in Solaris 11? I tried below as described in https://blogs.oracle.com/hasham/entry/solaris_10_increasing_number_of , but it cannot work.
set pidmax=60000
set maxusers = 4096
set maxuprc = 50000
set max_nprocs = 50000
Thanks!
Edited by: 966272 on Oct 18, 2012 7:38 AMPerhaps you should work your original forum post:
Oracle 11g installation fail on Solaris 11 64bit - ORA-00443
through to a resolution before you complicate things that likely don't apply.
You make an assumption in that other post about exceeding various maximums. That may be true or it may not be true. Since the installation of a database program seems to be your actual expectation, go work that forum thread instead. -
How to view the characteristics in process order
Hi, How to see the characteristics in process order screen which are assigned in material master classification view. say, created a material and assigned some characteristics in classsification view. for the same material created a process order. like to see those characteristics in process order. is it possible. please advise.
raju
to see this characteristic in the process orden you should go to Header >> CO Classification. If you want to add a characteristic, this should be added to SAP_KKR_CLASS. Characteristics for material (001) are not the same than those for CO Classification (013), so you should develop some special report (we did some special developmet for the printing of order forms )
regards -
How to automate the data load process using data load file & task Scheduler
Hi,
I am doing Automated Process to load the data in Hyperion Planning application with the help of data_Load.bat file & Task Scheduler.
I have created Data_Load.bat file but rest of the process i am unable complete.
So could you help me , how to automate the data load process using Data_load.bat file & task Scheduler or what are the rest of the file is require to achieve this.
ThanksTo follow up on your question are you using the maxl scripts for the dataload?
If so I have seen and issue within the batch (ex: load_data.bat) that if you do not have the full maxl script path with a batch when running it through event task scheduler the task will work but the log and/ or error file will not be created. Meaning the batch claims it ran from the task scheduler although it didn't do what you needed it to.
If you are using maxl use this as the batch
"essmsh C:\data\DataLoad.mxl" Or you can also use the full path for the maxl either way works. The only reason I would think that the maxl may then not work is if you do not have the batch updated to call on all the maxl PATH changes or if you need to update your environment variables to correct the essmsh command to work in a command prompt. -
How to know the runtime execution process
Hi ,
How to view the runtime execution process(steps) of a class. I know how to debug, but i like to view the Assembly language code .
Please suggest
Thanks ,
RajWhy on earth are you ignoring your previous topic about the same question where the answer is already given more than once?
[http://forums.sun.com/thread.jspa?threadID=5355140] -
How to fool the cluvfy (11g) into thinking CentOS is an acceptable OS
Hi,
Does anyone know how to fool the CVU (11g) to think CentOS 5 is acceptable? With 10g it was easy, just edit the /etc/redhat-release file. But it seems Oracle has gotten wise and made 11g tougher to fool.
I am in the midst of installing Oracle 11g Clusterware. I am at the tailend of the Clusterware Installation, on the "Configuration Assistants" screen and I just got a failure message at the part where the OUI runs the "Oracle Cluster Verification Utility", this command is executed:
cluvfy stage -post crsinst -n node1,node2
The command fails because it doesn't accept the Operating System and then OUI reports the error.
Has anyone got a workaround for this?
Thanks,
PhanyThanks for your response.
I see what you are saying. You are saying it is safe to click the Next button on the OUI if you are confident the error thrown by the CVU is ignorable.
I want to clarify that my initial impression was that the OUI was stuck at this failure and it was unsafe to ignore the error and proceed farther because perhaps some important step may be skipped. However I reviewed my screenshots from the last time I installed RAC a year ago (10gR2), and it seems like on this "Configuration Assistant" Screen the CVU is the last step. The other assistants "Succeeded", so I feel fairly confident with clicking the [Next] button on the OUI and proceeding.
My screen looks like this:
==================================================
Configuration Assistants
Tool Name.............................................................Status.............Type
Oracle Notification Server Configuration Assistant.......Succeeded.... Recommended
Oracle Private Interconnect Configuration Assistant.....Succeeded.... Recommended
Oracle Cluster Verification Utility................................Failed (See Details).... Recommended
...................................................................... [Retry] .......[Stop]
Details
|....blah, blah, blah.............................. |
| ........................................................|
[Help]...........[Installed Products].......[Back].......[Next] ........ [Install] ...... [Cancel]
==================================================
LOL, I guess it was the popup error message that spooked me into not clicking the Next button:
OUI-25031: Some of the configuration assistants failed/cancelled.
It is strongly recommended that you retry the configuration assistants at this time.
Not successfully running any "Recommended" assistants means your
system will not be correctly configured. -
How long does the number porting process take?
Hello Everybody! I just got my iphone (witch I LOVE it by the way) but I was wondering, how long does the number porting process take?
I ported my phone number over from SprintPCS last night at around 7pm EST and right now it's 8am EST and my Palm seems to still be working... Is this normal?
I'm still receiving incoming calls to my Palm, Text messages to my Palm, but yet I can do outgoing calls from my iphone... I'm kinda confused...
I mean I received the text on my iphone from sprint telling me: "Welcome to AT&T" as well as receiving the e-mail saying my new phone number is the same one I've had for 6 years now... Is 13 hours considered normal?
Thanx! :-DQueenYvette,
If it continues to be an issue tomorrow, I would recomend calling again, and getting in contact with AT&T's porting department. They are familiar with resolving any issues that may arise.
Powering off both phones is to make sure that the old phone is not maintaining an active connection with the old carrier that can interfere with the last steps of the porting process. If at all possible its a good idea to leave the old phone powered off, and restart the new phone about once an hour so that it will resync with the towers.
Hope this helps,
Nathan C. -
Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?
Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and apply the fix below:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book. If you can't finish trying all of the otpions and then boot into Safe mode and try there.
OT -
How to trigger the BPM process from WD Application
Hello All,
I have a simple business process with two ui activities. I am able to start the process from NWA -> Process Repository.
But, I need to start the process from the application. Here is the requirement:
User opens the application. ON completion, the BPM process for approval needs to be triggered. How do i access/obtain process?
If I need to call a particular task in process, How do i do that?
Kindly assist.
Thank you.
Regards,
Sharathif you want to know the whole story, please refer to the doc
http://help.sap.com/saphelp_nwce72/helpdata/en/44/4d2bb1c6b00597e10000000a155369/frameset.htm
the profile, provider system,endpoint。。。。。
search this doc in sdn, it is a good example regarding the configuration.
How to Use SOA Configuration to Call RFCs and Web Services from within SAP NetWeaver BPM
hope those may help. -
BPM 11g Process Administrator functions: Where are they now??
Good morning,
I've got some decent ALBPM6.0.5 experience, and now I've just started in a new project that uses BPM 11g. I've attended to an Oracle "Hands On" so I know 11g is VERY different from 10g/ALBPM.
My main problem is that I cannot find anywhere where are Roles and Users managed in the server. From where do I administer Roles, Users, Groups, Organizational Units. All that used to be in the Process Administrator. How is that done now? I swear I've gone through all the documentation at http://download.oracle.com/docs/cd/E14571_01/soa.htm and still found nothing :(
Also, is now using an LDAP mandatory? Or can something like ALBPM Directory still be used??
Thanks in advance.User/Role management is now done through the workspace itself. You must login as an administrative user (like weblogic) and you will see an Admin link in the upper right of the workspace.
Authentication and user lookup is now handled directly by Weblogic - so you setup authentication Providers in the WLS security realm through the admin console.
By default Weblogic is configured to use an internal LDAP that stores local users (this is where the "weblogic" user itself is defined).
General steps are provided here:
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10226/hwf_config.htm#BHCJGBFJ
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/secmanage/atn.html#wp1198953
Edited by: Mike Rokitka on Jul 2, 2010 11:17 AM -
BPM 11g Process Hierarchy?
Hi,
In the BPA Suite I can define a process hierachy by assigning a BPMN process diagram to a function like a subprocess.
(How) can I do this in the BPM Suite 11g?I believe you have to use the Send/Receive tasks now in order to call a reusable subprocess in BPM 11g. This requires the sub process to be message based where as the Call activity allowed non message based processes.
-
How to set the value of process variables/payload using a managed bean?
Hello,
Someone can give me an example about how to set the values of a process payload in a managed bean?
thank you!Try this:
jsf page:
<af:selectOneChoice label="Select Suburb"
requiredMessageDetail="Select a suburb"
valueChangeListener="#{selectOneChoiceBean.onValueChanged}"
validator="#{selectOneChoiceBean.validate}"
unselectedLabel="None" autoSubmit="true"
binding="#{selectOneChoiceBean.selectOneChoice}"
value="#{selectOneChoiceBean.value}">
<f:selectItems value="#{selectOneChoiceBean.selectionList}"/>
</af:selectOneChoice>
backing bean:
public class SelectChoiceBean {
private List<SelectItem> selectionList;
private String value = "B";
private RichSelectOneChoice selectOneChoice;
public SelectChoiceBean() {
initSelectionList();
public void setSelectionList(List<SelectItem> selectionList) {
this.selectionList = selectionList;
public List<SelectItem> getSelectionList() {
return selectionList;
public void onValueChanged(ValueChangeEvent valueChangeEvent) {
System.out.println(valueChangeEvent.getNewValue());
// Add event code here...
public void validate(FacesContext facesContext, UIComponent uIComponent,
Object object) {
// Add event code here...
private void initSelectionList() {
selectionList = new ArrayList<SelectItem>();
selectionList.add(new SelectItem("A", "A label"));
selectionList.add(new SelectItem("B", "B label"));
selectionList.add(new SelectItem("C", "C label"));
public void setValue(String value) {
this.value = value;
public String getValue() {
return value;
public void setSelectOneChoice(RichSelectOneChoice selectOneChoice) {
this.selectOneChoice = selectOneChoice;
public RichSelectOneChoice getSelectOneChoice() {
return selectOneChoice;
} -
How to call the BPM objects in the child JSP?
Hi,
We are facing some problem, we are trying to use the JSP for the UI instead of BPM Presentation.
In the JSP we are calling the child JSP(using JSP include), we need to pass the BPM objects from child to parent JSP.
Can any one help me on how to pass the Object between the JSP's and BPM Obejcts.
I will explain in the Example too,
1. We are created the BPM objects with fields
2. Created 2 JSP's 1. Main.JSP 2. Sub.JSP
Now we need to call the sub.jsp into main.jsp,while we calling we need to pass the sub.jsp BPM Object.
Regards,
Anandh PHi
When you use <% include page="test.jsp" %> you can use the same object's name in child jsp like in parent file (this is static way to include another file).
Hope this could solve the problem. regards. -
How to delegate the work flow process.
hi
i was wondering if someone has taken a leave and he is replaced by an employee x,the work flow approval should be directly move to the employee x.
but its not the case.as when someone is one leave,the workflow does not go to his replacement to approve
Is there a way how to delegate the workflow process?"
Thank youHi,
By identify the replacement in leave process, workflow process doesn't route to that person. I guess that replacement field is just for data capturing only. The approver should use delegate functionality available on notification responsibility to identify which process route to which person in a given time period.
Thanks
Maybe you are looking for
-
I'm running Windows Vista on Parallels on my MacBook Pro and I desperately want to be able to get my tasks from Outlook onto my iPhone 4S in some form. I've been struggling unsuccessfully so far with TaskTask and with 2Do. Any ideas?
-
NEF File Preview not available w Nikon D300
Using Lightroom 1.3, when I attach the Nikon D300, 12 or 14 bit file, the NEF and jpg files do import successfully, but only the jpg files show in preview. The NEF previews are grayed out. Sorry if this topic is addressed. I cannot find anyone with a
-
Error with late payment (LATEPYMT) batch: getting multiple LPC values for every bill
In my Environment, the LPC value is getting generated more than once for every bill i.e., If i'ven't made a payment for two continue bills then the system is generating the current balance on this bill and again sepearatly another lpc value for the c
-
MSE NMSP status inactive after WLC 5508 HA failover
I have a customer who has a Prime Infrastructure 2.0 server and MSE 7.4 server for Context Aware Services. The MSE also has the AeroScout Tag Engine for Tracking the AeroScout RFID tags it has deployed. They have a WLC 5508 HA pair running versi
-
Trying to download I tunes 11.5. Keeps giving error messages. How will I solve it?