How to archive an edited film (in FCE) in FCP X

When I archive a film, edited in FCE, the first clip and sometimes also the second clip of the film is placed at the end! The other clips are corectly placed.
How to change it?

the edited tape , with resolves, is split into clips!
That's what I was asking you. So it's not a single digitized file? This is problem with the tape recording or the playback. A continuous recording, such as printing to tape in FCE, should create a single digital video file when captured. The application is getting breaks in the playback which it's seeing as shot changes. There may in fact be a few frames missing at these points. I would suggest using a different application, maybe the QT player to capture the media.
(Not sure what resolves mean. Dissolves?)

Similar Messages

  • How can 2 user edit 1 word document at the same time

    hi,
    in office 2013 professional plus, can 2 user edit 1 word document at the same time?

    Hi,
    As far as I know, multiple users can not edit Word file in the same time directly. Could you give me your demand?
    Please check the two follows workarounds if they are helpful:
    http://blogs.msdn.com/b/johnmullinax/archive/2010/04/19/co-authoring-how-two-people-can-edit-one-word-2010-doc-at-the-same-time.aspx?Redirected=true
    http://www.ehow.com/how_7229904_allow-word-document-same-time.html
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
    Regards,
    George Zhao
    TechNet Community Support
    Hi
    thank you; its worked.
    I'm so excited about this; thank you again.

  • How to archive the IDOC

    Hi
    How to archive the IDOC to remove error form some report
    Thanks
    Manjunatha

    Hi
    goto Transaction SARA , Archiving Object  - IDOC - IDoc - Intermediate Document
    1 .Enter the archiving object IDOC and choose the required action, here  Write (= Archive).
    A warning will be displayed if some of the archiving sessions for the archiving object IDoc are still incomplete. You can ignore the warning but you then run the risk of possibly archiving some IDocs twice.
    2. Define the  start date of the archiving session and the  spool parameters (print output).
    The traffic lights should now be green, indicating that these parameters have been maintained. Please note that you can set the archiving mode for the print output to Store Only and therefore avoid printing every individual archiving log. Enter the object type IDOC as the attachment parameter and use the F4 Help to select a suitable document type for the object type. Also enter a free text as Additional information for the archiving report.
    4. Choose   Maintain to create a report variant. As selection parameters, enter the message type and a time period within which the IDocs received their last, current status.
    5.You can specify whether you want to perform this variant as Test or Production, in the Process Flow segment of the selection parameter screen. If you choose Test, you get statistics of the processed IDocs. For a detailed log, select Detailed Log. 
       6.         Choose  Continue and save your variant.
       7.      Return to the archiving screen and choose .
    If you selected immediately in step 3, the message New archiving job was generated is displayed in the message bar at the bottom of the screen.
           8.      You can check whether your archiving session is complete by selecting Job overview. If you choose Administration, an overview of the completed and incomplete archiving runs is then displayed. If IDocs which match your selection parameters were found in the database tables, your archiving session is displayed as a folder full of archive files.
    Please gothrough the Link
    http://help.sap.com/saphelp_erp2004/helpdata/EN/dc/6b81ed43d711d1893e0000e8323c4f/frameset.htm
    Thanks & Regards
    Kishore
    Edited by: Kishore Kumar Chiluka on Jul 29, 2008 12:03 PM

  • How To Archive Encore CS3 projects

    Question: How To Archive Encore CS3 projects
    I edit my AVI files in Premiere Pro CS3 and then author in Encore CS3. When the project is finished, I want to archive both the Premiere and Encore projects. If I need to restore a project, I would recapure the AVI files from the mini DV tapes using Premiere.
    What Encore and Premiere files and folders do I have to save so I can later restore the project?
    What files and folders can I erase?
    Thank you for the feedback.

    Adobe Premiere Pro is very similar to Final Cut Pro (non-X). It has a number of pros, including being bundled with the Creative Suite, which includes Photoshop.
    Avid Media Composer is, IMHO the best "story telling" editor, but is a little more difficult and unwieldy when it comes to effects etc. In addition to being pricey, it also require compliance with the use of only AVID approved hardware.
    Autodesk has Smoke on the Mac, which is an excellent effects editor, but with a $17K price tag.
    My personal plan is to bunker my FCS 3 systems and run them until they drop, while slowly and comfortable migrating to Premiere Pro.
    One big advantage to either of these editors (with the exception of Smoke on the Mac)  is that they are cross-platform, so if you learn the Mac version you can switch easily to the PC version - which protects your investment of time in learning the softwre as the future for the Mac Pro is also hazy.
    MtD

  • Editing film in FCP

    This is a very elementary question, but after reading much im still not clear about the steps as to how to edit film telecined 24 fps on digibeta or beta then down converted to dvcam.
    Can anyone help to make clear as the specific steps to take to capture, edit, sound sync to the producing of the edge numbers for the negative cutter?
    thanks so much
    sameer

    Here's a book recommended by David Slater in the thread listed below it.
    Nonlinear - A Field Guide to Digital Video and Film Editing, by Michael Rubin
    http://discussions.apple.com/thread.jspa?messageID=2051736??
    Here's another thread I got with a search of this forum.
    http://discussions.apple.com/thread.jspa?messageID=1317675??
    I'm sure there's more great info out there, but if you search this forum for 'pulldown' or 'film editing' or some such, you'll find tons of info in this forum.
    The first thread I listed (with the book suggested by David Slater) has multiple links to sites that will give you tons of info.
    Hope that helps.
    K

  • How to Archive PCL2 & PCL4 clusters

    Hi,
    Can anyone , Please let me know ,How to Archive PCL2 & PCL4 cluster data ?
    Thanks
    kisu

    Hi,<br>
    PU22
    Description                                                                               
    After you have created an archiving group, you can use the archiving    
    menu to carry out all the further steps in archiving.                                                                               
    Note                                                                    
         There are differences between the business and the technical side of
         archiving.                                                          
         The business side includes all the preparation work before data is  
         actually removed from the database. This includes the following     
         points within the archiving menu; Edit archiving group, Personnel   
         numbers and HR archiving preparation.                               
         The technical side includes the transfer of data to the archive and 
         deletion from the database. These activities are outlined in the    
         Archiving group of the archiving menu.   
    An archiving group can be changed, depending on it's status. If you have 
    not already assigned any personnel numbers to the archiving group, you   
    can still change all the archiving group's characteristics. If you have  
    already assigned personnel numbers to the archiving group, you can no    
    longer change the following characteristics:                                                                               
    o   Whether to use Payroll, and for which country you use it                                                                               
    o   Which payroll data should be archived                                                                               
    o   If travel data and/or time evaluation results are processed in       
        Payroll                                                                               
    If you have already checked personnel numbers in the test run, you       
    should repeat this test after changing the archiving group.                                                                               
    Note                                                                     
        An archiving group that has been released for archiving can no       
        longer be changed.                                                   
    FURTHER read the documentation of  the PU22 tode. same with SARA.
    Copying and  pasting is more like junk. I would recommend you to go to SAP and read the document in the t-codes itself.                       
    Good luck<br><br>
    Thanks,
    Amosha
    <br><br>"Known is a drop & unknown is an OCEAN!"

  • How to archive attachments

    Dear experts,
    I don't know how to archive files attached to transactions?
    When I archive transactions, are they also archived at the same time?
    Or do I have to archive transactions and attachments separately?
    'BC_LOIO' seems the archive object for me when seeing t-cd:aobj.
    Please help me.
    Regards,
    Fukuhara Yohei
    Edited by: Yohei Fukuhara on Dec 25, 2009 1:59 PM

    Hello,
    Attachments to your business transaction will not be archived when you archive your business document.
    First you have to figure out where is your attachment stored?
    If it is stored in SAP Table then you can think of relocation / migration of attachments to your external content server.
    If attachment is already stored in external content server then nothing to worry about these documents. Users can display Physical attachments even after you archive business document from respective archiving object.
    Hope this will answer your question.
    -Thanks,
    Ajay

  • Are You Trying To Edit A Format FCE Can't Handle? Take A Look Here.

    Lately a number of people have been having problems editing formats that FCE can't handle easily.
    I came across this link for FREE Mac video editing applications:-
    http://tv.isg.si/site/?q=node/873
    You will find apps for Windows and Linux platforms as well.
    I have no idea how good (or bad) they are, but thought that anybody trying to edit a weird format may find them useful alongside FCE ........ I could be completely wrong, but as they cost nothing you have nothing to lose - except time.
    Just noticed the article is over 3 years old, but the apps are still there for download ....... don't know how well they will work on the latest Macs, but you are not paying anything!
    Message was edited by: Ian R. Brown

    Welcome to Apple Discussions!
    To summarize your problem:
    1. It happens with more than one version of iPhoto.
    2. It happens in more that one account.
    3. It happens with more than one OS.
    Try some basic remedies. I don't think they will solve the problem, but it can't hurt to try them. Quit iPhoto and delete your iPhoto preferences. To do this, go to your username> library> preferences> com.apple.iphoto.plist. Delete this file. Then reopen iPhoto; it will create a new preference file with all of the default settings.
    Do a verify and repair of permissions using Disk Utility.
    My feeling is that this is a hardware rather than software problem. If the problem persists, I suggest that you post in the PowerMac G5 forum.
    I hope this helps.

  • I have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?

    i have bought a film from itunes and the credit has come out of my account, but i can't find the film anywhere, it said it was downloading, then i left the laptop and on return i couldn't find the film. how do i find the film?

    Maybe it is in the Purchased category of iTunes,
    Try going there

  • I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone?

    I am trying to edit my music list and then sync it to my iPhone 5 so I don't run out of storage space. However, I see the check marks on the iTunes library but am unable to uncheck them? How do I manually edit what will be synced to my phone? (the check marks are not bolded, does this mean they are not in my library but only on my phone?)

    You uncheck the music in your iTunes library on your computer and along with sync only checked songs and videos selected under the Summary selection for your iPhone sync preferences with iTunes, only checked songs in your iTunes library will be transferred to your iPhone or remain on your iPhone and the unchecked songs in your iTunes library that are currently on your iPhone will be removed when syncing.
    Or make use of iTunes playlists and choose selected playlists, albums, artists under the Music selection for your iPhone sync preferences with iTunes and select the playlists below that you want transferred to your iPhone.

  • How to open and edit a TopLink .mwp file?

    I can not open the toplink_mappings.mwp file using JDeveloper tool.
    How to open and edit a TopLink .mwp file?
    Thank you

    Hi,
    Use JDeveloper to import the mwp project .In Jdeveloper,File->Import->ToplinkWorkbench->Select the .mwp file and can work from JDeveloper in editing the tlmap.xml and session.xml.
    Regards,
    P.Vinay Kumar

  • Video Format Total Solution: How to Convert and Edit Video on Windows/Mac

    More and More video formats are coming out with different video encoders and it makes our spare time more and more colorful. However, it is not to say that there is no problems. Actually, different video formats make it difficult to share video with others, even your own camcorder and iPod. Is there an easy way to convert videos effectively. Yes, there is.
    In this article, I will show you guys how to convert videos on windows and mac.
    Part 1. How to Convert and Edit Videos on Windows
    For Windows users, you need a Video Converter(http://www.aiseesoft.com/total-video-converter.html) to do that for you.
    Here I use Aiseesoft Total Video Converter(http://www.aiseesoft.com/total-video-converter.html)
    Step 1: Download and install Aiseesoft Total Video Converter
    After you download it to your computer, double click it and it is really easy to install.
    You just need to click “next” and it will complete it in seconds. It will automatically run after installation.
    http://www.aiseesoft.com/images/guide/total-video-converter/screen.jpg
    Step 2: Load Video
    Click “Add File” to find the video that you want to convert and click “open”. It will be loaded automatically.
    Step 3: Select the target to decode
    In the “Profile” drop download list you can find your target according the usage of your output video, such as if you want to put the video on your iPod touch, you can select the “iPod” in the first list and “iPod touch 2 MPEG-4 640*480(*.mp4)” in the second list.
    Step 4: Set Advanced Parameters
    After you select the right output profile, you can click “setting” button to set your advanced parameters. You can adjust video and audio settings separately. In video section, you can change “video encoder”, “resolution”, “frame rate”, “video bitrate”In audio section, you can change “audio encoder”, “sample rate”, “channel”, “audio bitrate”If you want to save this profile and settings and use it next time you can click “save as” button to give a name to it. And the next time you want to use it you can find it in the profile list named “user defined”.
    Step 5: Choose a Destination
    To browse and find a output folder for your output files or just the default one.
    Finally, Click “Convert” button to begin your conversion, here in the converting
    interface you can choose “shut down the computer when conversion complete” or “open output folder when conversion complete” or you just do not choose neither one.
    Tips: How to Edit the Output Video
    This video converter is also a video editor, you can use it to edit your output video as follows:
    http://www.aiseesoft.com/images/guide/total-video-converter/effect.jpg
    1. Effect:
    You are allowed to adjust the “Brightness”, “Contrast”, “Saturation” and you can choose the “deinterlacing” to make the video more enjoyable.
    2. Trim:
    In “Trim” section you can pick up any part of the video to convert.
    There are two ways to select the part of the video you want. One is set the start and end time in the box. The other one is to drag the start and end button in the processing bar.
    3. Crop:
    This function allows you to choose a certain play area to convert. That means you can choose a part of the screen you like to convert. For example, you just like the tv in the middle of the screen, then you can drag the frame around the preview window to select the tv and the output preview will show you the output video.In this section you can also choose the “zoom mode”, such as “keep original”, “full screen”, “16:9”, “4:3”.
    4. Watermark
    In the section, you can add a watermark on the output video to show people something, such as your name, website, studio name or other things. The watermark could be words and picture. You can adjust the transparent of the watermark easily to make it more beautiful.
    Part 2. How to Convert Video on Mac
    This time you need a Video Converter for Mac(http://www.aiseesoft.com/video-converter-for-mac.html)
    Step 1: Add File
    Click “Add File” button to load the video you want to converter
    http://www.aiseesoft.com/images/guide/mac-video-converter/steps.jpg
    Step 2: Choose profile and adjust settings
    You can find your output video format from a drop-list called “Profile”You can also adjust the specific settings of the output video, such as “Resolution”, “Bitrate”, “Encoder” and so on.

    @ Tamwini
    Your only goal is to sell software.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?

    How to import and edit a 3D video made with Sony HDR-TD10E camcorder, with .MVC file?
    I have PremierePro-CS5 installed.
    This stereo 3D camcorder (Sony HDR-TD10E), output an .MVC (MultiViewCoding) file, coded in H.264 format.
    This format is already compatible with Bluray3D stereoscopic format.
    1) But, how to edit the .MVC in Premiere?
    2) What plugin should I use (if exists) for PremiereProCS5?
    3) Cineform Neo3D, can manage the .MVC format? Can convert it to Cineform format file, for import it into Premiere?
    4) What software should I use to convert an .MVC video to an AVCHD H.264 file, and import it into PremierePro CS5 or CS5.5 for editing?
    Thanks!
    Horsepower0171.

    Sorry, I am Italian, it is very difficult for me to understand what he says!
    I can just read the english text, or follow the actions of a videotutorial!
    Thus my question is the same:
    -What software can do that?
    -Sony Vegas 10 do the Bluray3D authoring?
    -For MVC editing, should I wait for Adobe CS6? Or is it planned an update for CS5.5?

  • How can i send multiple films from iMovie06HD to iDVD? ( iDVD gave me ****)

    After 2 weeks of jerky videos, unexpected shutdowns, multiplex and buring errors i yesterday finally had something. Than i noticed, that the chapters didn't work. Allright, i thought, those 5-min chapter-marks are a mess anyway. I got myself iMovie06HD to finally set the markers myself.
    My Problem: I have got four films to burn on that dvd. Each of which is about half an hour and i want them to be on that dvd as four single films with own chapter menues.
    How can i send multiple films to iDVD from iMovie06HD? All i found was "only send selected clips" which i did but then my four single films arrive at iDVD as ONE whole film, with chapters yes - but there is no way to create a menu with four single films. I tried all i could imagine. I tried to solve the problem by creating four iMovie projects which will also create four corresponding iDVD projects. I tried to export the movies in multiple formats but then the chapter markers seem to be gone.
    I have to admit i'm desperate. I hope i made my problem clear to you and somebody knows a solution. Thank you! Cheers, Matthias

    Just drag and drop each iMovie project on to the iDVD menu - being careful to avoid any of the drop zones.

  • HT5177 How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    How can two people edit the same FCPX file? One company, so both people/computers share the same license. Example: I work on revision A and my boss takes it and makes revision B and gives it back to me using two separate computers.

    Have the project, events and media on one drive which is common to both macs.
    You can download FCP X to both macs using the same Apple ID that it was purchased with.
    Andy

Maybe you are looking for