How to arrive Password expiration situation in Cisco Router
Hi,
i have to test something on cisco router so i have to achieve this following scenario :-
I am trying to login using ssh username & passoword. so i need to expire this username & password on router.
Anybody tell me how to get this situation in my cisco router.
Thanks,
Pranay
Pranay,
Here is a guide on configuring the SSH username and password on your Cisco device:
http://www.cisco.com/c/en/us/support/docs/security-vpn/secure-shell-ssh/4145-ssh.html
You will need to setup the VTY lines, as well as setup a password in order for this to work.
Judging from the screen shot, you will need to run the commands listed in Global Configuration mode. (configure terminal)
Example:
Router#config t
Router(config)# username Pranay priviledge 15 secret 0 yourpassword
I hope this helps. Please let me know if you need further assistance.
Wes
Similar Messages
-
How to diable password expire feature
Could you let me know how to disable password expire feature in apex 4.1.0.00.32. for all admin accounts(We have 40 workspaces with different adnmin accounts).
I have checked all individual admin account in each workspace, the password expire check box is un-checked, but it still expired the account. What else I can do?
home-->admininstration-->Users-->Edit User-->Expire Password uncheckedThank you very much! I followed the link , this time I had set Account Password Lifetime (days) Enter 21960 (60 years), in hope that APEX will ignore the expired day count for good, instead of 45 day default , even though I already had Require User Account Expiration and Locking – Select No
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21678/adm_mg_service_set.htm#CIHBFFGH -
How to set password expiration for EBS users
how to set password expiration for EBS users .
Regards .Please follow below steps:-
This is available starting in RUP4.
The script to expire all passwords in the fnd_user table is $FND_TOP/patch/115/sql/AFCPEXPIRE.sql.
It can be executed from SQL*Plus or as a Concurrent Program: sqlplus -s APPS/ @AFCPEXPIRE.sql
or Submit concurrent request: CP SQL*Plus Expire FND_USER Passwords
This script sets the fnd_user.password_date to null for all users which causes all user passwords to expire.The user will need to create a new password upon the next login.
Thanks,
JD -
How to disable password expiration for the administrator?
Hello
is it possible to disable the password expiration for the administrator? For all other users the password should expire after 90 days but not for user administrator.
How would this look like with LDAP integration? I assume that user administrator is not replicated to LDAP and exists only in the local UME database, thus it would work like without LDAP. Or is my assumption wrong?
Thank you in advance for your answers.
Best Regards
WBHello Harikiran,
thanks for your answer.
Yes I found the setting in VA:
Global Configuration > server > services > UME provider >
ume.logon.security_policy.password_expire_days
or in Configtool:
Global Server Configuration > services > com.sap.security.core.ume.service >
ume.logon.security_policy.password_expire_days
But for me it sounds that this will apply then for all users that are managed in UME, not only for the administrator. Are you sure that this is only for the administrator?
What is with the users database table in WEB AS Java? Does somebody know the name of this table?
Regards
WB -
How to set Password expiration at 45 days for all users (new or existing)
Hey all please suggest suitable way to set password expiration at 45 days of all application users.
i am using APPS R -12.1.3 ...reply with possible ways.
URGENT... -
How to check: password expired,password forced to change,user disable
I am writing application to detect the following. I just need to check whether the condition is true. What are the things that I need to check for:
- when a user password is going to expired in x days?
- when a user is forced to changed a his password?
- when a user is disabled? For this, do I check the attribute "nsaccountlock=true"?
ChooichinI am writing application to detect the following. I
just need to check whether the condition is true.
What are the things that I need to check for:
- when a user password is going to expired in x
days?
you can use he passwordControls during a BIND operation and investigate if the password expired/expiring in so many secs
- when a user is forced to changed a his password?
- when a user is disabled? For this, do I check the
attribute "nsaccountlock=true"?Yes, if some interface is actually using this to disable the user in the first place.
>
Chooichin -
How to setup Guest Network Name in Cisco Router
Hello everyone!
The first. Sorry my english =)
I want tald you how to change guest network name in cisco (what have different name)
What we need.
1. Cisco Connect for Mac OSX (i use snow leopard and Cisco Connect for E3000)
2. Terminal
Okay. Let's go.
1. Install Cisco Connect for OSX
2. After setup - slighty setup your cisco router (give something name and password), then, when cisco connect say you "You now connected the internet" and going to main screen - exit from cisco connect
3. Open Terminal (Or you can use Finder (go to Application, show package content Cisco Connect))
4. Go to /Application/Cisco Connect.app/Contents/Resources/lcid/<your setup language, for english - go 1033>/
5. Edit resource_strings.pus (vi resource_strings.pus)
6. Change "-guest" in string <LocalizableString RcFileId='10019' BaseTextHash='0xA65E286D' BaseText='-guest'/> for something what you want. For example, i changed for ' Guest Network'
7. Save
8. Open Cisco Setup
9. Go to router configuration and change desired name. I changed to 'Grizlly Bear'
10. After setup name - go to Guest Setting and Enable. As you can si, your guest network name set as 'Grizlly Bear Guest Network'
11.Exit Cisco Setup
12. Go to web interface setup
13. Setup Wifi manual and change SSID for diferent names. I change 5Gh to 'Grizlly Bear Hi-Speed Network' and 2.4GHz to 'Grizlly Bear Main Network'
14. Setup your hostname for all services (fileserver, media server, etc)
Woala!
We have three diferent names network!
Questions?In order to enable Guest networking, the AirPort Extreme must be configured as your "main" Internet router. In this configuration, Connection Sharing = Share a Public IP address. The Extreme would be connected directly to the Internet modem and NOT downstream of another router with NAT enabled.
In this configuration, the Guest network would provide access ONLY to the Internet and NOT to your LAN. -
How to test Smart Call Home in cisco router?
Hi ,
I have done basic configuration n cisco router for Smart call Home.Please help me out on testing SCH if its proper or requres more configuration.Below is the configuration;
call-home
contact-email-addr [email protected]
mail-server 10.0.0.59 priority 1
mail-server "" priority 2
mail-server "" priority 3
mail-server"" priority 3
profile "CiscoTAC-1"
active
profile "Test"
destination preferred-msg-format long-text
destination address email ""
destination address email ""
subscribe-to-alert-group environment severity critical
subscribe-to-alert-group syslog severity minor pattern ".*"
subscribe-to-alert-group configuration periodic weekly Tuesday 17:00
subscribe-to-alert-group inventory periodic monthly 30 20:30hi bryan,
But how will i know the cisco is receiving the alerts for the devices.Is there any way for checking that.
Profile Name: CiscoTAC-1
Profile status: ACTIVE
Preferred Message Format: xml
Message Size Limit: 3145728 Bytes
Transport Method: email
Email address(es): [email protected]
HTTP address(es): https://tools.cisco.com/its/service/oddce/services/DDCEService
Periodic configuration info message is scheduled every 13 day of the month at 10:03
Periodic inventory info message is scheduled every 13 day of the month at 09:48
Alert-group Severity
diagnostic minor
environment warning
inventory normal
Syslog-Pattern Severity
.* major
Please suggest.. -
How to create custom GUI interface for Cisco router?
Hello,
I am working on a Cisco solution and I have my router configured for the solution I need. However, if a non-cisco person needs to use my solution then I think he will need a GUI interface which will have few "buttons" which when clicked will run some Cisco commands on Cisco router to make it work. Is there a way to design such GUI interface which is compatible with Cisco routers? I know Cisco has SDM, but that is too involved and detailed, which is useful only for people who know atleast a little bit about Cisco. Here I am looking at crowd who will have 0 knowledge of Cisco.
Please let me know if something like this can be done. If yes, how and how easily?
Thank you.There are lots of ways to do this - you can use SNMP or even HTTP to push or pull commands from Cisco devices. How easy it is to create a GUI depends on your programming skills. I would guess a simple web page triggering backend scripts would be the easiest way to do this.
-
How to send password expiration email warning- (Set in password Policies)
I tried creating a password policy and linked it with a resource object (iPlanet Directory Server). Its working fine. But I am not getting the email warning notification before the password actually expires.
I am not sure as to how the checkbox that I checked while creating the policy i.e, "Warn after---- days" , works.
Can anybody help me and detail me the process as to what and how should I do to send an email warning notification for the user whose password will expire in few days.
Thanks in Advance.Hi Amit,
Please check the below link for the solution:
Password protection for excel file - not urgent
Hope that helps!
Regards,
Saba -
How does fire extinguisher material affect a cisco router?
I have an oddball disaster-type situation where a fire extinguisher of type dry powder (ABC) was sprayed around a lot of Cisco gear in a server room. Could this material be corrosive to the circuit boards or would it just be dirty from the material?
ThanksComputer rooms are expected to have specialized extingushers because ABC material (usually Ammonium Phosphate) can be corrosive to electronics.
You would need to get a professional inspect to determine if these is damage to the electronics. Your insurance agent might be able to recommend someone.
Some reading: http://www.ilpi.com/safety/extinguishers.html -
How do I password protect wireless access point router model BEFW11S4 ver. 2?
My wireless connection works fine when it is not secure. My model router is sort of old and isn't supported by linksys. I had someone else set it up with a password, but someone must've hit the reset button as it no longer is working. When I set the "passphrase" for the WEP in the setup for my router it says it is successful. When I to my network it asks for the password. It accepts it, but then I get a message that says there is limited or no connectivity. I also get a message that there is no IP address. When I try to "repair" by right clicking the properties under the wireless connection, it says it Windows is renewing my IP address, but it fails, then the screen where you would normally see the IP address says Private Address IP 169.254.240.4 but it still is not connected. When I drop the Mandatory WEP and go back to the non-secur connection it works fine. Any ideas?
For connecting to network, you have to use WEP key 1, and not the passphrase. Rest you are doing correct.
-
How to disable/set password expiration to None in EBS
HI ,
I just clone a 11i , and was asked to set all users password not to expire . I have studied FND_USER_PKG.UPDATEUSER , but has no idea how to do it . Can anyone help ? Thanks
FelixHi;
Please check below which could be helpful for your issue:
Password information-Where ebs pass keep
Re: Password information
password expiration for EBS users
how to set password expiration for EBS users
password polciy
Password policy
Regard
Helios -
Remove password expiration time limit for ocs users
Hello,
I want to know how to remove password expiration time limit for ocs (11gR2) users? In our system all user accounts are getting expired in 1 week. I have to remove expdate. (profile was changed)
ThxSQL> select * from dba_profiles where RESOURCE_NAME LIKE 'PASSWORD_LIFE_TIME';
PROFILE RESOURCE_NAME RESOURCE LIMIT
DEFAULT PASSWORD_LIFE_TIME PASSWORD 180
MONITORING_PROFILE PASSWORD_LIFE_TIME PASSWORD DEFAULT
SQL> ALTER PROFILE DEFAULT LIMIT PASSWORD_LIFE_TIME UNLIMITED;
Profile altered.
SQL> select * from dba_profiles where RESOURCE_NAME LIKE 'PASSWORD_LIFE_TIME';
PROFILE RESOURCE_NAME RESOURCE LIMIT
DEFAULT PASSWORD_LIFE_TIME PASSWORD UNLIMITED
MONITORING_PROFILE PASSWORD_LIFE_TIME PASSWORD
To change the password for a user:
alter user username identified by new_password;
Edited by: hitgon on Apr 30, 2012 7:33 PM -
Remove Password Expiration Time setup
Hello,
I want to know how to remove password expiration time limit for ocs users? In our system all user accounts are getting expired after 3 to 4 weeks. I have to remove this restriction and make password never expiresYou have to do this directly in OID using oidadmin (Oracle Directory Administrator)
Instructions are in the admin guide at this URL
http://download-west.oracle.com/docs/cd/B25553_01/collab.1012/b25490/ch_users_groups.htm#OCSAG373
Maybe you are looking for
-
Scroll Bar on Stacked Canvas [Solved]
Hi, I am trying to do the following. I have a form FORM A. Another form FORM B is called with a click of a button on FORM A. FORM B is having 2 blocks each on a stacked canvas. BLOCK 1 is master block and BLOCK 2 is detail block. Table on which BLOCK
-
Most popular api for modifying excel spreadsheets?
I googled a bit and it seems like POI and jexcel are the most popular ? I'm interested in hearing your opinions... I've tried POI and I find it OK, but I wish I had more features like copying a row and "pasting/inserting" it into another row and copy
-
SQL STATEMENT NOT PROPERLY ENDED - HELP NEEDED
Can anyone tell me the error in this code, I get an error message sql statement not properly ended when I run it. update MODT set rootobj=(SELECT REF(A) FROM OR_COMP_T A WHERE A.ID=O.ID) AS OR_COMP_T_REF) FROM OLD_MODT O where id = 1;
-
Snow Leopard makes 3 burps-beeps
My imac 10.6.8 Snow Leopard makes 3 burps-beeps while running (not at start-up) Nothing goes wrong or happens, just makes the 3 weird noises while sitting with a web site open. How do I stop this. Only happens about 2 to 3 times a day when it does
-
Can't Open Display localhost:0.0
I'm trying to connect to my linux server but I'm having some major problems. The server had OEL 5 installed and my local pc is running Windows XP. I'm using PuTTy to connect to the server with Xming running on my loacl machine. I login as root and ru