How to ascertain the fans operate when needed?

I have a MBP 2 GHz, 2 GB Ram. When I run the Apple Hardware test, both the shorter and the extended versions, no troubles are found; I can hear both fans kick in one after the other during the logic board testing part. However, I have never heard them kick in during MBP daily use. According to CoreDuo Temp, the CPU temps goes as high as 78-84 Celsius during more intense operations. Yet, the fans do not kick in.
As posted on the subject, how do I ascertain that the fans will kick in when they need to? How can I check that out?
Thank you!
SVT

Someone should really make a program that can let us control the fans, I've noticed my MBP from the outside gets no warmer when playing counter strike source on an overclocked videocard compared to when its idle just because the fans are on. I bet if the fans are on when idle or doing light tasks the MBP would run MUCH cooler.

Similar Messages

How to disable the reminding dialog when close the webi report viewer

Dear all
How to disable the reminding dialog when close the webi report viewer
Background
When user close the webi report viewer in inforview by click the button in the right-top of the webi report viewer frame. It always prompt a dialog to remind user that the modification will be lost without saving.
But customer need to disable this dialog, and can clost the report viewer directly.
So is there any ways to modify this?
I think it shoule modify some .js file under tomcat, but can not find the solution.
Thanks a lot, any information woulde be appreciated.
David Zhang

I've had the same issue bugging me since installing Snow, er, lion, er, cat, er, cougar, er, Mountain Lion. Incredibly ANNOYING.
It's stupid stuff like this and reverse scrolling that really turn long-timer users off. I'm personally glad Forstall got fired for blunders such as these.
I'm serious peeved that turning off iCloud Documents & Data actually deletes documents and data locally. That's just incredibly stupid.
MANY thanks mende1 for the answer on how to fix it.

How to see the pass folios when log in to another cell phone or iPad

how to see the pass folios when log in to another cell phone or iPad

You need to log into the content viewer with the same Adobe ID you used to create the folio. Note: iPad folios will not appear on the iPhone but should be available on all other devices.

How can I prevent firefox to Offer to save passwords and how to remove the tick checked when I log in to gmail?

While using firefox I am using, private browsing and not remembering any passwords.
When I login to Gmail, the login page shows option to type in my gmail id and then password, and at the bottom, it gives the option of checkbox to remember the password next time. NOW, the problem is that, THIS CHECK box is always TICKED (Checked). I don't want it to be checked at all.
So How can I prevent firefox to Offer to save passwords and how to remove the tick checked when I log in to gmail?
Thank you so much.

Hi Imran_Afzal, if you know that setting the cookie has no effect after you close your private browsing session, is it really worth finding a hack to clear the checkbox?
I believe in order to do that you would need to use an extension or userscript. However, I haven't searched for one.
''Note: When searching for a userscript on userscripts.org, be very cautious as many hacked scripts have been posted lately. Check reviews and check the code to make sure it only runs on your Google site before installing.''

How to access the Text Frame, when we use scrollable frame,

Hi Friends,
How to access the Text Frame, when we use scrollable frame,
Thank you,
[ Nav ]

That's the same question:
how can I access something (a page item) on a page…
Answer: you need something unique in that object you can get a handle on.
Or you use the selection a user of your script is doing and work with that selection…
A "scrollable frame" is nothing special. What it makes it a "scrollable frame" is the DPS software.
So you have to look for attached labels on the object, that identify the object for the PDS plug-in "Overlay Creator" as a "scrollable frame". That's possible with the "extractLabel("KeyString")" function. But you need to know the appropriate key-string in advance.
In another of your thread in the DPS forum, I basically answered the question how to obtain those key-strings.
When knowing the key-string you could loop through all your page items (you can skip all text frames) in the allPageItems-collection, to identify the "scrollable frame" by extracting the right label.
If you have more than one "scollable frames" you need a second unique identifier for the particular object.
That could be nearly any property.
Keep in mind, there is no "scrollableFrames" collection in the DOM !
Uwe

How to block the 'save' function when the required fields are not filled?

Hello, Everyone
I am new for this scripting. My question is:
How to block the 'save' function when the required fields are not filled?
I designed a PDF file with some required fields and I do not want the user to save the document until all required fields are filled. My idea is to write some scripts in Willsave method like:
if (this.getField("Family Name").value == ""){
app.alert('You should fill the Family Name field firstly!');
But I do not think it works as finally the document is saved after all.
Please help me on that!
So much thanks.

Dear Randybearwang,
I am a Rocky myself and I know how though it is to establish some good codes. Since I created some forms with validation options myself I might have a code for you. The code also creates an alert box (Yes/no option) if the user chooses yes the form will be validatet, if he chooses "no" the alert window will be closed.If everything is filled out correctly the form will be saved otherwise the textbox will be higlighted and gets focus.
If you need further assistance , please let me know
Have fun with the code.
P.s I don´t know how to upload the "PDF" document. I wrote you an email, please get back to me if you still need the file.

How to Customize the Error Message when a user enters a wrong password

Hi Gurus
Pls Help out me that
How to Customize the Error Message when a user enters a wrong password ?
I need the Help to Customize the messege ?
How we can do
Pls Tell me indetail

Firstly many appologies I have given you slightly duff information here, I had been editing the file above for email notification texts not logon / password texts.
The file you need is actually a portal .par file and can be found in the deployment/pcd directory. The file you need is called com.sap.portal.runtime.logon.par (with a .bak extension at this time).
You need to copy this file to a local machine and unzip the contents. The files you need to edit are contained in a further jar file which can be found in the \PORTAL-INF\lib directory - it is called umelogonbase.jar. It too needs to be extracted and the file you need to edit is logonMessages_xx.properties (where the xx is the language code you are using).
In this file you will find lines like:
NUMERIC_REQUIRED=Invalid new password (must contain digits)
You need to identify which texts you wish to modify and edit the text to the right of the equals sign. Once complete rezip the umelogonbase.jar file and then the com.sap.portal.runtime.logon.par (this time name it without the .bak extension. Then logon to the portal and upload the new par and you should see your new logon messages.
Haydn

Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

How to change the default JRE when there are several version of JRE in Sys

How to change the default JRE when there are several version of JRE in System?
i have installed j2sdk1.5.0 then installed j2ee1.4,then installed Weblogic6.1 which use jdk1.3
Now the JRE is jdk1.3\bin
When run class that was compiled with jdk1.5,throw:
java.lang.UnsupportedClassVersionError
How can i change the jre to 1.5?

There is a workaround to move from 1.5 version to the older 1.4 version. But this could be specific to the browser setting the JRE version.
Excerpts from sun docs:
However, a user can still run older versions. To do so, launch the Java Plug-in Control Panel for the older version, then (re)select the browser in the Browser tab.
Example:
Assume you are running on Microsoft Windows with Microsoft Internet Explorer, have first installed version 1.4.2, then version 5.0, and you want to run 1.4.2.
Go to the j2re1.4.2\bin directory where JRE 1.4.2 was installed. On a Windows default installation, this would be here: C:\Program Files\Java\j2re1.4.2\bin
Double-click the jpicpl32.exe file located there. It will launch the control panel for 1.4.2.
Select the Browser tab. Microsoft Internet Explorer might still appear to be set (checked). However, when 5.0 was installed, the registration of the 1.4.2 JRE with Internet Explorer was overwritten by the 5.0 JRE.
If Microsoft Internet Explorer is shown as checked, uncheck it and click Apply. You will see a confirmation dialog stating that browser settings have changed.
Check Microsoft Internet Explorer and click Apply. You should see a confirmation dialog.
Restart the browser. It should now use the 1.4.2 JRE for conventional APPLET tags.
Details are here
http://java.sun.com/j2se/1.5.0/docs/guide/deployment/deployment-guide/jcp.html
My system (Windows XP) has the version 1.5_09 set as the default. However i just installed JRE 1.5_06 and would like to revert back to _06 as the default JRE..
Will update if i find more information

How to get the Useru2019s position when the user doesnu2019t have CP relation

We have a custom program which will add / delete attributes (In transaction PPOSA_BBP). It is working fine for users which were assigned with CP relation But it fails for users which doesnu2019t have CP relation (since we are getting the position of users form HRP1001 then we are retrieving the existing attributes based on the position after that updating the attributes) as we are getting the position from HRP1001 it fails for users were no CP relation.
Help us how to get the Useru2019s position when the user doesnu2019t have CP relation. Suggest us any function module or how to query the HRP1001 or some other table if exists
Regards
Paul

Hi Paul,
Have a look at these tables.
Using table BUT000 the central business partner data are stored, f.e. partner type, partner names, partner number, partner guid, person number, etc. In table BUTBKK the bank data to a business partner are stored.
Central business partner address data
The table ADRC is used for the address of a business partner. Table BUT020 links the business partner number with the address number. Using table BUT021 several addresses to a business partner with different usages (modes), f.e. correspondence or delivery address, can be stored. The personal data of a business partner person are stored with key person number in table ADRP. The person number is assignd to a business partner person in table BUT000. Communication data of business partners as e-mail, telephone, fax, etc. are stored in the tables ADDR1 u2013 ADDR12. The business address of a contact person or an employee consists of the organization address (company resp. org.-unit) and of an address addition, which describes f.e. a building, a room number, etc. The address addition is stored in table ADCP and is identified by the keys address number of the organization address and person number.
Relationships between business partners
Table BUT050 contains the relationships between a business partner organization and a business partner person using relation types. The relation types are defined in table TBZ9, f.e. the relation type u2018has employeeu2019 corresponds to identifier u2018BUR010u2019, the relation type u2018has contact personu2019 corresponds to identifier u2018BUR001u2019. Table BUT051 stores communication data of a contact person relationship (compare to table ADCP). Table BUT052 stores several address numbers to one business partner relationship (including a standard flag).
Hope this helps,
Kind Regards,
Matthew

How to delete the temporary files when we log out from ESS

Hello expert,
In my company we are running ESS using ITS server, do you know how to delete the temporary files when we log out from ESS?
Thanks.

The temporary files used by ESS. For example paystub pdf file.

How to validate the file path when downloading.

Hi
How to validate the file path when downloading to Presentation or application Server.

hiii
you can validate file path by following way
REPORT zvalidate.
TYPE-POOLS: abap.
DATA: w_direc TYPE string.
DATA: w_bool TYPE abap_bool.
w_dir = 'c:\Myfolder\'.
CALL METHOD cl_gui_frontend_services=>directory_exist
EXPORTING
directory = w_direc
RECEIVING
result = w_bool
EXCEPTIONS
cntl_error = 1
error_no_gui = 2
wrong_parameter = 3
not_supported_by_gui = 4
OTHERS = 5.
IF NOT w_bool IS INITIAL.
WRITE:/ 'Directory exists.'.
ELSE.
WRITE:/ 'Directory does not exist.'.
ENDIF.
regards
twinkal

HT4061 how to restore the iphone 4 when you get a restore message error (-1)?

how to restore the iphone 4 when you get a restore message error (-1)?

If the iPhone was jailbroken, you get this error due to baseband mismatch. No help for such iPhones here in this forum.
if not, Restore on another computer. If error persists it is hardware failure.

How to get the search option when we are creating new view

Hi,
How to get the search functionality when we are creating new view.
Ex:- if we see the standard component BT112S_SC. Under this
AdvancedSP is the view,
same kind of view if i want to create new view with same bol entity in my new component. I am unable to get that search functionality.
for search functionality,,i think view should inherit the super class CL_BTSRV_ADVS_CNTRL, but in my new view controller class, i am unable to find this class.
Can anybody give me some inputs on this.
Thanks,
neelam

In case you are still not able to proceed please refer the following blog.
http://blogs.moovar.com/sap/sap-crm-web-ic-create-a-new-search-view-and-result-view
Regards,
Harshit

How to edit the nbu file when the mobile device is...

How to edit the nbu file when the mobile device is not connected?
That software that is available in the nokia site “nokia phone browser” is not useful! Why?
It is not working unless the mobile device is connected (attached)
It is quite slow when editing the contacts! (attached)
Then why the nokia doesn’t offer a simple software that enable us to edit and explore the content of our nbu files?
Is there some workaround in this regard?
Is there some software the can edit the nbu files?
Thank you for the help,
Best
Jamal
Attachments:
Clip_774.jpg ‏166 KB
Clip_775.jpg ‏127 KB
Clip_773.jpg ‏243 KB

when serializing the DOM, use this: transformer.setOutputProperty(OutputKeys.DOCTYPE_SYSTEM, scrReg.dtd");
Merry Chrasmas too ;-)

How to ascertain the fans operate when needed?

Similar Messages

Maybe you are looking for