How to asmcmd cp non ASM files to ASM on a remote node

We have a 8TB database, RDBMS 11,1. on Solaris 10, non ASM. Need to copy the 1290 files to remote node of AIX ASM to prepare for a upgrading to 11.2.0.2.
We tried to use asmcmd cp to copy the files directly from non ASM too ASM remotely, but did not work.
$ asmcmd cp -ifr [email protected]:/oradata/prdsdev/datafiles/dev_4.dbf +PRDSU_DATA/PRDSU/TEMPFILE/dev_4.dbf
Enter password: ********
Argument "normal" isn't numeric in numeric ge (>=) at /optware/oracle/11.2.0.2/grid/lib/asmcmdshare.pm line 1676.
errors
ORA-01031: insufficient privileges (DBD ERROR: OCISessionBegin)
We were using the user fttr. Do we need to login as SYSASM, do we need to go through OS auth, any other privilege required. What instance do we need to login, regular database that is using the data files, or ASM instance is goin g to manage the files.
Thanks in advance

1. my previous question is if asmcmd cp can accomplish the task.
2. RMAN COPY, as I know, will either copy non asm files to ASM files locally, or copy files asm to asm across nodes. which means that we have to do two steps, rather copy the non asm files to a node of asm directly.

Similar Messages

How do I locate non picture files and location? I'm getting low memory and can't find word,PDF etc

how do I locate non picture files and location? I'm getting low memory and can't find word,PDF etc

iPads don't have a filesystem like a computer, Files of that nature must be associated with an App and reside inside that particular App's file space. So the way to find them is to open the App that opens that file type and look in its file or document list for them.

How to publish a non scorm file to open in new window on LMS?

Hi, I've published an elearning module to our LMS, but I can't get it to open in a new window.
I've published some captivate courses before which all did open in a new window. The difference with this one is that all the others were scorm (had quizzes which this one doesn't.)
Is that the problem? I did try to publish the file as if it were a scorm file (tick 'enable reporting for this project') but then the LMS could not open the course.
The file is published like: elearn output: disabled, display score: no, enable access.: yes. Output options: export html
Any ideas?
Thanks a lot!

Hello and welcome,
Several factors will be responsible for the SWF output file. You use high resolution (ppi, 24-bit; sometimes I have better results with Optimized which cannot be set here but has to be done in the slides themselves), probably needed because of quality. You can reduce more by setting only those slides that need this high quality to High (or Optimized) and leave the others at Low but this also has to be done in the Slide Properties and then you'll have to check 'Retain Slide Quality Settings'. But what is the total resolution of your project: widthxheight? Because that is also one of the main factors! Next question: do you have audio? Audio clips add a lot more to the filesize than slides and/or graphics. If you have be sure to keep the lowest acceptible settings for the audio. Do you have video inserted? Again... adds to filesize.
Maybe this seems a stupid question, but I have so often seen files with slides that have an unneccessary long duration. Each second of a slide adds 30frames to your project...
Lilybiri

How to expose Hibernate 'non' conventional beans into flex apps via remoting

I am relatively new to the flex world. I am from the
Spring/Hibernate world.
In Hibernate, the POJO object or domain object , or simply
beans that you use to persist you object into the database does not
have to follow the bean definition/contract, i.e: public default
constructor with getter/setters. There are good reasons behind
creating those kind of 'hibernate beans' (I will call them that way
for lack of a better name). In fact, only defining a one-parameter
constructor (i.e. omitting the default one) guaranties you that
your client cannot invoke your API without that needed parameter.
Likewise, exposing only the getters for some private member
variables (without the setters) make sense when you don't want that
variable to ever change, etc....hibernate can do all that using
cglib, etc....
Now, my understanding of Flex and how remote services work
(from what I could see in all the samples around about
hibernate/spring), is that your java server bean get proxied
'dynamically' or 'statically' if I wish into an Actionscript class
object according to the rule: "values found in public bean
properties with get/set methods and public variables ", therefore
my public getVariable() from my 'hibernate' bean does not get sent
back.
This is creating me tons of problems, because the server API
already exist and we already have a JSF implementation using
it....Changing into flex is just my own initiative to prove that we
can get better UI...
What is flex/BlazeDS solution for fixing this case?
One solution that comes to mind (not very bright, but should
work) is to build a plain java bean object for each of these
'hibernate' beans to ensure the translation on both side between
the 'hibernate bean' and the 'expected' bean from flex. From the
server to the client, It would to copy the content of the hibernate
bean and return those 'proper' beans back to flex. On the way out
(from the client to the server), it would have to recreate the bean
as exposed on the server before sending it to the server).... It's
probably not the best solution, especially considering that
eventually as some point, I will need to define another set of
those object, in flex, using actionscript (I think these are what
you guys call VOs) in order to do strong typing in
flex........becomes very tough to manage!
Any input would be valuable.
Thank you,

Hi Saket,
By 'not really complete' I'm assuming (hoping) that some work has been done on this already. Our project requires the use of custom assets, so it's very important that we get this functionality running as soon as possible.
Any help, unsupported or otherwise, would be great. Feel free to email me any details if you'd prefer not to post anything public on the boards.
Cheers,
Kristian

How to converrt files on RAW devices in ASM to non ASM file system.

Hi all,
I have on problem .
Is that possible to migrate ASM raw files system to non ASM file .
If possible plzz describe them.
If not also please tell y not?
Thanks in addvance
Regards
Krishna

Hi,
I totally agree with Mahir. And I just want to share one thing:
Use %U to generate guaranteed unique names :
For backupsets, %U means: %u_%p_%c
For an image copy of a datafile, %U means: data-D-%d_id-%I_TS-%N_FNO-%f_%u
For an image copy of an archived redolog, %U means: arch-D_%d-id-%I_S-%e_T-%h_A-%a_%u
For an image copy of a control file, %U means: cf-D_%d-id-%I_%u
Thank you

How to restore (not duplicate) DB from RAC ASM to non ASM

Hello everybody,
i am trying to recover db from RAC+ASM to non ASM no RAC node. I am running Oracle 10g (10.2.0.4) on Win2003 Server. I have functional backup from my prod system.
Here are my steps:
*1. On prod server i make backup running this script in RMAN*
configure channel device type 'SBT_TAPE' parms'SBT_LIBRARY=oracle.disksbt,ENV=(BACKUP_DIR=e:\backup)';
RUN {
backup device type SBT_TAPE database tag zal20081129;
SQL 'alter system archive log current';
backup device type SBT_TAPE archivelog ALL tag zal20081129;
*2. I prepared clon instance on another server (The same Oracle version) and start it to nomount mode.*
*3. I copied the backup from prod server to clon server to exactly the same path. (e:\backup)*
*4. I connect to RMAN on my new node and I use the DBID parameter and I restore controlfile.*
rman
connect target /
set DBID 3079749916
startup nomount
run {
allocate CHANNEL CTAPE DEVICE TYPE 'SBT_TAPE' PARMS'SBT_LIBRARY=oracle.disksbt,ENV=(BACKUP_DIR=f:\backup)';
allocate channel CDISK DEVICE TYPE DISK;
restore controlfile from 'f:\backup\78k91lrn_1_1';
alter database mount;
*5.Then I check the backup, crosscheck etc.*
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
169 Full 42.78G SBT_TAPE 01:12:54 04-MAR-09
BP Key: 169 Status: AVAILABLE Compressed: NO Tag: DATAFILES
Handle: 75k91hcj_1_1 Media:
List of Datafiles in backup set 169
File LV Type Ckp SCN Ckp Time Name
1 Full 928460863 04-MAR-09 +DATA/agost/datafile/system.272.668509367
2 Full 928460863 04-MAR-09 +DATA/agost/datafile/undotbs1.273.668509387
3 Full 928460863 04-MAR-09 +DATA/agost/datafile/sysaux.263.668509393
4 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_archive_data.298.668509401
5 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_archive_index.258.668509401
6 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_blob.259.668509401
7 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.274.668509405
8 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.275.668509533
9 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_report_data.260.668509661
10 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_report_index.261.668509661
12 Full 928460863 04-MAR-09 +DATA/agost/datafile/undotbs2.264.668509661
13 Full 928460863 04-MAR-09 +DATA/agost/datafile/users.265.668509667
14 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.270.668510837
15 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_index.299.668510843
16 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.300.668510859
17 Full 928460863 04-MAR-09 +DATA/agost/datafile/ifsapp_data.301.668510865
BS Key Size Device Type Elapsed Time Completion Time
171 1.98G SBT_TAPE 00:02:54 04-MAR-09
BP Key: 171 Status: AVAILABLE Compressed: NO Tag: ARCHIVE_LOGS
Handle: 77k91lm2_1_1 Media:
List of Archived Logs in backup set 171
Thrd Seq Low SCN Low Time Next SCN Next Time
1 790 927018133 03-MAR-09 927379509 03-MAR-09
1 791 927379509 03-MAR-09 927635333 03-MAR-09
1 792 927635333 03-MAR-09 927804715 03-MAR-09
1 793 927804715 03-MAR-09 928438198 04-MAR-09
1 794 928438198 04-MAR-09 928496353 04-MAR-09
1 795 928496353 04-MAR-09 928496667 04-MAR-09
2 941 927018173 03-MAR-09 927414357 03-MAR-09
2 942 927414357 03-MAR-09 927725821 03-MAR-09
2 943 927725821 03-MAR-09 927747874 03-MAR-09
2 944 927747874 03-MAR-09 927804436 03-MAR-09
2 945 927804436 03-MAR-09 928375778 03-MAR-09
2 946 928375778 03-MAR-09 928460503 04-MAR-09
2 947 928460503 04-MAR-09 928496341 04-MAR-09
2 948 928496341 04-MAR-09 928496660 04-MAR-09
*6. Then I run this script to restore and recover db.*
run {
SET UNTIL SEQUENCE 795 THREAD 1;
SET UNTIL SEQUENCE 948 THREAD 2;
restore database;
switch datafile all;
recover database;
*7. Everything goes well see under.*
RMAN> 2> 3> 4> 5> 6> 7>
executing command: SET until clause
executing command: SET until clause
Starting restore at 04-MAR-09
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
channel ORA_SBT_TAPE_1: starting datafile backupset restore
channel ORA_SBT_TAPE_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to +DATA/agost/datafile/system.272.668509367
restoring datafile 00002 to +DATA/agost/datafile/undotbs1.273.668509387
restoring datafile 00003 to +DATA/agost/datafile/sysaux.263.668509393
restoring datafile 00004 to +DATA/agost/datafile/ifsapp_archive_data.298.668509401
restoring datafile 00005 to +DATA/agost/datafile/ifsapp_archive_index.258.668509401
restoring datafile 00006 to +DATA/agost/datafile/ifsapp_blob.259.668509401
restoring datafile 00007 to +DATA/agost/datafile/ifsapp_data.274.668509405
restoring datafile 00008 to +DATA/agost/datafile/ifsapp_index.275.668509533
restoring datafile 00009 to +DATA/agost/datafile/ifsapp_report_data.260.668509661
restoring datafile 00010 to +DATA/agost/datafile/ifsapp_report_index.261.668509661
restoring datafile 00012 to +DATA/agost/datafile/undotbs2.264.668509661
restoring datafile 00013 to +DATA/agost/datafile/users.265.668509667
restoring datafile 00014 to +DATA/agost/datafile/ifsapp_index.270.668510837
restoring datafile 00015 to +DATA/agost/datafile/ifsapp_index.299.668510843
restoring datafile 00016 to +DATA/agost/datafile/ifsapp_data.300.668510859
restoring datafile 00017 to +DATA/agost/datafile/ifsapp_data.301.668510865
channel ORA_SBT_TAPE_1: reading from backup piece 75k91hcj_1_1
channel ORA_SBT_TAPE_1: restored backup piece 1
piece handle=75k91hcj_1_1 tag=DATAFILES
channel ORA_SBT_TAPE_1: restore complete, elapsed time: 01:25:12
Finished restore at 04-MAR-09
Starting recover at 04-MAR-09
using channel ORA_DISK_1
using channel ORA_SBT_TAPE_1
starting media recovery
channel ORA_SBT_TAPE_1: starting archive log restore to default destination
channel ORA_SBT_TAPE_1: restoring archive log
archive log thread=1 sequence=794
channel ORA_SBT_TAPE_1: restoring archive log
archive log thread=2 sequence=947
channel ORA_SBT_TAPE_1: reading from backup piece 77k91lm2_1_1
channel ORA_SBT_TAPE_1: restored backup piece 1
piece handle=77k91lm2_1_1 tag=ARCHIVE_LOGS
channel ORA_SBT_TAPE_1: restore complete, elapsed time: 00:02:26
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_1_794_4TX5D7RD_.ARC thread=1 sequence=794
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_2_947_4TX5D7OY_.ARC thread=2 sequence=947
channel default: deleting archive log(s)
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_2_947_4TX5D7OY_.ARC recid=1563 stamp=680629925
channel default: deleting archive log(s)
archive log filename=E:\ORADATA\AGOST\FLASHBACK\AGOST\ARCHIVELOG\2009_03_04\O1_MF_1_794_4TX5D7RD_.ARC recid=1562 stamp=680629925
media recovery complete, elapsed time: 00:00:13
Finished recover at 04-MAR-09
*8. Then when i want to open database*
using command 'Alter system open resetlogs;' I got this error:
RMAN>
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 03/05/2009 07:26:03
RMAN-06003: ORACLE error from target database:
ORA-00600: internal error code, arguments: [kgeade_is_0], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/], [], [|http://forums.oracle.com/forums/]
In the alert log I have got this error: (for every log group)
ORA-00313: open failed for members of log group 4 of thread 2
ORA-00312: online log 4 thread 2: '+FLASHBACK/agost/onlinelog/group_4.260.668510637'
ORA-17503: ksfdopn:2 Failed to open file +FLASHBACK/agost/onlinelog/group_4.260.668510637
ORA-15001: diskgroup "FLASHBACK" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
ORA-00312: online log 4 thread 2: '+DATA/agost/onlinelog/group_4.268.668510633'
ORA-17503: ksfdopn:2 Failed to open file +DATA/agost/onlinelog/group_4.268.668510633
ORA-15001: diskgroup "DATA" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
ORA-29701: unable to connect to Cluster Manager
So obviouslly database wants to open online logs in the path like ASM. Which is wrong. What should I do to tell database to open it according to init.ora parameters
*.db_create_file_dest='e:\oradata\agost'
*.db_create_online_log_dest_1='e:\oradata\agost'
Any suggestions???
Thanks

Hi,
thanks for you quick answer. But I do restore to the local file system, even if the log says:
restoring datafile 00001 to +DATA/agost/datafile/system.272.668509367
restoring datafile 00002 to +DATA/agost/datafile/undotbs1.273.668509387 .....
all the datafiles are correctly restored. I think oracle uses the parameter db_create_file_dest and creates the files there.
I tried also the script with SET NEW NAME:
run {
Set newname for datafile 1 to 'e:\oradata\AGOST\system.272.668509367';
Set newname for datafile 2 to 'e:\oradata\AGOST\undotbs1.273.668509387';
Set newname for datafile 3 to 'e:\oradata\AGOST\sysaux.263.668509393';
Set newname for datafile 4 to 'e:\oradata\AGOST\ifsapp_archive_data.298.668509401';
Set newname for datafile 5 to 'e:\oradata\AGOST\ifsapp_archive_index.258.668509401';
Set newname for datafile 6 to 'e:\oradata\AGOST\ifsapp_blob.259.668509401';
Set newname for datafile 7 to 'e:\oradata\AGOST\ifsapp_data.274.668509405';
Set newname for datafile 8 to 'e:\oradata\AGOST\ifsapp_index.275.668509533';
Set newname for datafile 9 to 'e:\oradata\AGOST\ifsapp_report_data.260.668509661';
Set newname for datafile 10 to 'e:\oradata\AGOST\ifsapp_report_index.261.668509661';
Set newname for datafile 12 to 'e:\oradata\AGOST\undotbs2.264.668509661';
Set newname for datafile 13 to 'e:\oradata\AGOST\users.265.668509667';
Set newname for datafile 14 to 'e:\oradata\AGOST\ifsapp_index.270.668510837';
Set newname for datafile 15 to 'e:\oradata\AGOST\ifsapp_index.299.668510843';
Set newname for datafile 16 to 'e:\oradata\AGOST\ifsapp_data.300.668510859';
Set newname for datafile 17 to 'e:\oradata\AGOST\ifsapp_data.301.668510865';
Set newname for tempfile 1 to 'e:\oradata\AGOST\temp.276.668509397';
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_1.256.668509345'' TO ''e:\oradata\AGOST\REDO01.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_1.257.668509351'' TO ''e:\oradata\AGOST\REDO02.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_2.257.668509357'' TO ''e:\oradata\AGOST\REDO03.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_2.258.668509361'' TO ''e:\oradata\AGOST\REDO04.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_3.266.668510623'' TO ''e:\oradata\AGOST\REDO05.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_3.259.668510627'' TO ''e:\oradata\AGOST\REDO06.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_4.268.668510633'' TO ''e:\oradata\AGOST\REDO07.LOG'' ";
SQL "ALTER DATABASE RENAME FILE ''+FLASHBACK/agost/onlinelog/group_4.260.668510637'' TO ''e:\oradata\AGOST\REDO08.LOG'' ";
SET UNTIL SEQUENCE 795 THREAD 1;
SET UNTIL SEQUENCE 948 THREAD 2;
restore database;
switch datafile all;
recover database;
But it gives me this error in RMAN:
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
sql statement: ALTER DATABASE RENAME FILE ''+DATA/agost/onlinelog/group_1.256.668509345'' TO ''e:\oradata\AGOST\REDO01.LOG''
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of sql command on default channel at 03/06/2009 10:48:55
RMAN-20000: abnormal termination of job step
RMAN-11003: failure during parse/execution of SQL statement: ALTER DATABASE RENAME FILE '+DATA/agost/onlinelog/group_1.256.668509345' TO 'e:\oradata\AGOST\REDO01.LOG'
RMAN-11001: Oracle Error:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
and in alert log i have got this:
Errors in file c:\oracle\product\10.2.0\admin\agost\udump\agost_ora_3200.trc:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
Fri Mar 06 10:48:55 2009
ORA-600 signalled during: ALTER DATABASE RENAME FILE '+DATA/agost/onlinelog/group_1.256.668509345' TO 'e:\oradata\AGOST\REDO01.LOG' ...
dont know what to do.
There must be way how to recover it. I think my first try (without SET NEWNAME) is closer to the end, there is only need to "repair" the online logs.
Any other suggestions?
thanks

How to add other 2 control files at ASM in linux RAC

Hi Experts,
I am new for RAC .
the vendor build a RAC for us. I found there are only one control file in system.
we use oracle 10.2.0.4 at ASM with RAC in redhat linux 5.
how to add 2 additional control file to ASM for RAC ?
Please provide a procedur in detail.
Thanks
Jim

Hi damorgan & Friends,
I could not find some infomration to add control into ASM . I can do this job( see below procedure) in no ASM .
My question, our database locates at ASM and control file with a system auto-number ( fully qualified filename ) as
+DATA1/SALE/controlfile/current.256.690290159
How do I physical copy and rename other 2 contril file in directory and modify location in pfile?
I saw some paper to use request as an alias (such as +dgroup2/control/ctl.f). i can not image to copy/rename control.
Please help me!!
Thanks
Jim
========added control file for no ASM database and works=====================
1)
SQL> create pfile from spfile;
File created.
2)
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL
3)
SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
4) modify pfile add additional control file2/3 as
control_files='C:\Oradata\ORCL\control01.ctl','C:\Oradata\ORCL\control02.ctl','C:\Oradata\ORCL\control03.ctl'
and physical copy control01.ctl and raname as control02.ctl,control03.ctl
5)
SQL> startup pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.er database mount;
6)
SQL> Create spfile from pfile='C:\oracle\product\10.2.0\db_2\database\initORCL.ora';
File created.
7) check control file info under pfile environment
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L
8)SQL> shutdown immediate
Database closed.
Database dismounted.
ORACLE instance shut down.
9) startup as spfile environment.
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1247900 bytes
Variable Size 62915940 bytes
Database Buffers 100663296 bytes
Redo Buffers 2945024 bytes
Database mounted.
Database opened.
10) check control info for spfile environment
SQL> show parameter spfile
NAME TYPE VALUE
spfile string C:\ORACLE\PRODUCT\10.2.0\DB_2\
DATABASE\SPFILEORCL.ORA
SQL> show parameter control_file
NAME TYPE VALUE
control_file_record_keep_time integer 7
control_files string C:\ORADATA\ORCL\CONTROL01.CTL,
C:\ORADATA\ORCL\CONTROL02.CTL
, C:\ORADATA\ORCL\CONTROL03.CT
L

How to skip non-PDF files in Action on folder?

Hello,
I have an Action in Acrobat Pro XI that takes a default folder and (using JS) batch converts the PDFs to text. However, it also tries to convert *.txt files. I don't care that it imports the *.txt to *.pdf as temp file but it then stops the batch processing by asking if I want to save the changes to the temporary PDF. How can I bypass this? Here is the JavaScript it executes:
    /* Convert PDF to Text File (*.txt) */
    var inPath = "../";
    var outPath = "/c/users/***/desktop/test/output/";
    var myFile = inPath + this.documentFileName
    var myFileExt = myFile.replace(/^.*\./,'');
    if (myFileExt == 'tmp'){
        console.println(this.path);
    } else {
        console.println('Found a PDF!');
        console.println(this.path);
        this.saveAs(outPath + this.documentFileName + ".txt", "com.adobe.acrobat.plain-text");
Options I'm fine with:
Skipping all non-PDF files from the Actions WizardCan't find a method to do this.
Disabling the Save As prompt for the temporary created PDFs (*.txt files)
The line returned by console.println(this.path) if myFileExt == 'tmp' is this":/C/Users/**/AppData/Local/Temp/A9R6966.tmp
It still creates a temporary PDF.
I tried this.closeDoc('true') but it closes Acrobat entirely.
I hope that is concise enough! Thanks for looking.

Skipping all non-PDF files from the Actions Wizard
This used to be possible, but unfortunately it's not possible any longer in Acrobat XI.
What you can try to do is just add a Save command to your Action and hope that it saves the temp files silently (maybe you can save them in some temp folder), and then closes them and continues...

[JSF 2.0] How to add a non-displayed comment in JSF xhtml files?

Hello!
I would like to know how to put a non-displayed comment in a JSF xhtml file.
Currently, a ** will be sent in the HTML output.
I've tried also:
*// My comment*
*<%-- My comment --%>*
and other ideas, but they are failing.
On the web, I red an ugly solution, implying to add one parameter in each faces-config.xml files our project could have, and asking JSF not to parse some statements (if I remember well).
Whatever, I am quite sure it was a solution for JSF 1.0 or 0.9...
There must be a clean way to write a comment, but I just can't find it.
How do I write a comment that is not displayed on HTML output, in a JSF xhtml file?
Regards,
Grunt.
Edited by: Grunt2000 on May 10, 2010 9:23 AM

Grunt2000 wrote:
Hello!
I would like to know how to put a non-displayed comment in a JSF xhtml file.
Currently, a ** will be sent in the HTML output.
I've tried also:
*// My comment*
*<%-- My comment --%>*
and other ideas, but they are failing.
On the web, I red an ugly solution, implying to add one parameter in each faces-config.xml files our project could have, and asking JSF not to parse some statements (if I remember well).
Whatever, I am quite sure it was a solution for JSF 1.0 or 0.9...
There must be a clean way to write a comment, but I just can't find it.
How do I write a comment that is not displayed on HTML output, in a JSF xhtml file?Does this help?
<context-param>
<param-name>facelets.SKIP_COMMENTS</param-name>
<param-value>true</param-value>
</context-param>I'm not sure if that works under JSF 2. If not, you can always use <ui:remove/>.

How to upload non iWork files to iCloud...am I missing something?

I am wondering how to upload non iWork files to iCloud..such as pdf's, Xls, etc....etc any type of file really the way I could with iDisk.
Am I missing something simple?
Thnaks,
Derek

Thanks for your reply. Just curious if this method is standard setup the way Apple recommends to use iCloud in this situation or if it is a work around to accomplish what I am after?
Thanks again!
d.

Moving spfile from non-asm to asm file system

Hi All
We are migrating non-asm file system to asm file system, we are held up in moving the spfile from non-asm file system to asm file system ...
we tried the below method
Recreate SPFILE on ASM diskgroup
SQL> create pfile='c:\initTEST.ora' from spfile;
File created.
SQL> create spfile='+DGRP2/spfileTEST.ora' from pfile='c:\initTEST.ora';
File created.
after this we started both the running instance and asm instance
but after starting the instance TEST we saw the instance still using spfile of non-asm file system
what is the correct way of moving the spfile from non-asm to asm file system..
Regards
Hariharan.T

You need to perform this first:
First rename the $ORACLE_HOME/dbs/spfileTEST.ora to spfileTEST.ora_old
create initTEST.ora in dbs location with below contents:
Also i recommend you to recreate the spfile in ASM as it might not be in good shape.
When ever you start the oracle instance there is a specific order to find the oracle pfile/spfile
1. O_H/dbs/spfile<SID>.ora
2. O_H/dbs/init<SID>.ora
3. O_H/dbs/spfile.ora
4. O_H/dbs/init.ora
in your case instance always finds spfileTEST.ora in dbs location (non -ASM) and will stop looking further. If you remove it our of the way it will find initTEST.ora which will redirect to spfile present in ASM.
NOTE: As per your earlier update you created spfile in ASM after puttin spfile='+DG...' in the initTEST.ora..
If you start the instance with this SPFILE you will be getting "maxmimum cursors limit exceeded" error.
-Ravi.M

ASM to non-ASM database duplicate-ORA17503:ksfdopn:2 Failed to open file

Hi,
I am trying to duplicate an ASM database in to non-ASM database.
Having trouble when trying to start the duplicate database, it is looking for the redologs which are there in the ASM diskgroup in the production database, but the duplication database is non-ASM,
The database version is 10.2.0.4 on HP-UX 11.31
ORA-00313: open failed for members of log group 11 of thread 1
ORA-00312: online log 11 thread 1: '+DATADG/orcl/onlinelog/group_11.302.670427231'
ORA-17503: ksfdopn:2 Failed to open file +DATADG/orcl/onlinelog/group_11.302.670427231
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
Sun Aug 21 14:20:14 2011
Errors in file /u01/app/oracle/admin/orcl/udump/orcl_ora_12482.trc:
ORA-00367: checksum error in log file header
ORA-00305: log 12 of thread 2 inconsistent; belongs to another database
ORA-00312: online log 12 thread 2: '/oradbstg/oradata/orcl/redo01.log'
Sun Aug 21 14:20:14 2011
RESETLOGS after incomplete recovery UNTIL CHANGE 3632387878
Resetting resetlogs activation ID 1179611173 (0x464f7025)
Sun Aug 21 14:20:14 2011
Errors in file /u01/app/oracle/admin/orcl/udump/orcl_ora_12482.trc:
ORA-00313: open failed for members of log group 7 of thread 1
ORA-00312: online log 7 thread 1: '+DATADG/orcl/onlinelog/group_7.298.670427121'
ORA-17503: ksfdopn:2 Failed to open file +DATADG/orcl/onlinelog/group_7.298.670427121
ORA-15001: diskgroup "DATADG" does not exist or is not mounted
ORA-15077: could not locate ASM instance serving a required diskgroup
Sun Aug 21 14:20:14 2011
Errors in file /u01/app/oracle/admin/orcl/udump/orcl_ora_12482.trc:
ORA-00600: internal error code, arguments: [kgeade_is_0], [], [], [], [], [], [], []
ORA-600 signalled during: alter database open RESETLOGS...Any help would be appreciated.

When you are performing this task , is the ASM diskgroup "DATADG" mounted or existed.. try to figure out that first whether the diskgroup is mounted/existed or not .. And also when incomplete recovery is performed oracle creates the online redolog files when you start the db with resetlogs..
you can go through the following link :
http://oracleinstance.blogspot.com/2010/08/duplicatecloneconvert-asm-file-system.html
Cheers!

How to translate/convert read non-mac files

I can't open my bank statement which I download from the internet. It's in 'Money' format.
But since I can 'translate' .xls when working in Appleworks why can't I get a downloaded equivalent version?
What's the best way to convert non-mac files that can't be concerted by maclinkplus (which is installed in my iBook)?
Thanks
Gordon

That's something to take up with your bank. Most bank & some credit card company web sites give you the option of what format you can download your account information in. Unfortunately, most don't give an option of tab-delimited text, just CSV (comma-delimited), & AppleWorks can't open CSV natively. You can, though, open the file in a work processing document & use Find/Replace to Find the comma delimiters, usually "," including the quotes & replace with \t, the "code" for tab. You will need to manually remove the beginning & ending quotes. Then select all & paste into a spreadsheet.
Or you can do what I do for several of mine. I access my account info using Camino or Firefox, not Safari, & select > copy > paste into my spreadsheet. I use Camino or Firefox because the tabs between fields are usually copies as such. Safari doesn't "understand" these tabs & will paste as a lot of spaces & returns.

How to select none-adjacent files

Given a list of files - can I select none-adjacent files ?
I tried Alt Click, it does not work

Yes, it is in the Mac Help files. In the Finder, click Help, and enter "selecting files" in the search. In the search results, click "Select Items." That help file describes the shortcuts. Also, here is the same help page on the Web: Select Items
If you came from Windows, selecting works pretty much the same way on the Mac. You can substitute the Mac Command key for times you would use the Windows Control key, or substitute the Mac Option key for times you would use the Windows Alt key. This works for (most) keyboard shortcuts and many mouse actions. For example:
On Windows:
Shift-click files for contiguous selection
Control-click files for non-contiguous selection
On Mac:
Shift-click files for contiguous selection
Command-click files for non-contiguous selection

How long should a search to Include Non-Indexed Files take??

Hello,
I left last night doing a search in Bridge and I said to include the non-indexed files ... it has been running over 12 hours???
Is this normal on a large server?
If I let it keep going, will it make all the future searches faster?
thanks!
babs

I just did a search of at least 14,000 files and it took less than 1 minute.
Hence my statement that Bridge (despite being a fabulous app for ingestion and sorting etc, all the work needed before the files are ready for distribution or publishing) it is lousy for use as a DAM (Digital Asset Management).
It is also not designed for use over a network as you already clearly stated.
To spoil your party a bit more, I just timed my search in my DAM application Canto Cumulus Single user edition. Having almost 60.000 keepers from the last 17 years in my digital archive a search took almost 2 seconds....
Yes it is not fair because Bridge comes (somewhat) for free with PS or other CS applications and Cumulus single user is around 300 $ I believe.
But there are some cheaper DAM applications. All those DAM apps are pretty lousy in the work Bridge is very good at. It is just trying to get the right tools for the job

How to asmcmd cp non ASM files to ASM on a remote node

Similar Messages

Maybe you are looking for