How to assgn charge head with GL and Sales order

Dear Exparts'
I am a new user of SD module .I have created a charge head but stuck in GL assignment and Assign the charge head with Sales order.(sales order is already created)
Can any one tell me any direct transaction code or SPRO for the said problem.
Yeasin

hi,
maintain condition type kf00 in pricing procedure and assign G/L account, maintain the condition record in vk11,now goto sales order change(va02),goto contion tab and press update,new pricing will be carried out
regards
senya

Similar Messages

One Time Only charges in SD-SA and Sales Orders

Hi,
We have a requirement to provide a header surcharge condition in sales order / scheduling agreement for one time only charges. This basically required to throw a lump sum charge on order and charge the customer. User would enter the pricing condition manually whenever required and then once this is entered the full value of condition should be charged on the next invoice that is created, after adding the pricing condition on order.
The challenges that we are facing are:
1. Once the pricing condition is entered on order/SA, standard system would keep on condition in all the subesquent invoices.
2. The amount charged is prorated based on the quantity billed.
3. Any subsequent change of quantity in order results in recalcuation of condition value based on the quantity and might lead to a situation where amount would exceed the actual intended charge.
1. Is there a way to restrict order pricing condition to be copied on to one specific billing document. Once it has been charge should not be charged again on any of subsequent invoices.
2. Whenever the condition is passed to invoice, should be passed with full value.
3. Subsequent changes to order quantity (due to new del. schedule or order change) should not trigger the recalculation of this header condition.
Adding condition in delivery or invoice directly would easily meet the requirement but due to some limitation we have to add the condition at order only.
Can anyone suggest how to approach this problem technically? Is there any enhancement possiblity. Can we create some base value formula/condition value formula to override SAP standard behaviour.
Any help in this regard is highly appreciated. Points guaranteed for helpful replies.
Regards,Gajendra

Solved myself

How to fetch post goods issue date and sales order creation date

Hi All,
How to find out the difference between SD Sales Order Item Creation Date and final Post goods issue Date. I would like to know how to fetch those dates and what is the relationship between the tables from which i will get the dates.
Please let me know the solution .
Thanks in advance.

Hi,
Sales order creation date is when u raise a sales order in favor of the customer using VA01.......using ATP logic system purposes the material availability date....
after saving ur sales order...when u raise the Delivery using VL01n w.r.t to OR...than u have to perform picking ....In the picking Tab...specify the amount to be picked than press Post Good Issue....means the goods left the company premises ..
You can the fetch the values using tables- Use T code SE12 or SE16
Vbak-----order header
Vbap-----order item
Vbek-----order schedule line
Likp-----Delivery header
Lips----Delivery item

Capture Characteristics with Material and Sales Order

Dear All ,
I have to capture the charecteristics alongwith the material, these characteristics also flow in the sales order, basically a class has been defined which holds a number of characteristics and this class is assigned to the material and I guess this is done using the variant configurator,
1) How will be able to capture the same and display
   those ?
2) Does this characteristics flow in the standard
   extractors of the material and sales order or any
   other cube which can multicubed with those ?
Plz do suggest me the an viable option.
Thanks & Warm Regards,
Fayak.

Hi Anil,
Thanks for your reply, I have checked up the material attributes it does not flow there and I was referrring to one note where you can enhance your datasource using CTBW to capture this characteritsics so I did enhance 0MATERIAL_ATTR, the other attributes are listed as an TEXT DataSource and If I check them using RSA3 data gets populated accordingly but the enhanced datasource 0MATERIAL_ATTR which become 1CL_MAT001 does not return any records shows zero records, I am looking for charcterictics which have been mapped using an Variant Configurator and as far as the note suggests it has to be done thru CTBW to capture this, I have done that but success still eludes me,
Experts Plz help on this as I am on pressure to complete this.
Thanks,
Fayak.

How to get COUNT of Invoice No and Sales Order No from Multiprovider

Hello Guys,
I have a scenario like below. I have 2 info cubes (1) Billing Item Info cube (2) Sales Order Item Infocube which stores Item level data in infocube. I created Multiprovider for these Sales Order Item Cube and Billing Item Info cube.
Now in My Multiprovider, Invoice No and Sales Order No gets repeated no of times because one Invoice and One order will have no of Materials. I have a requirement to count Total No of Billing Document and Total No of Sales Document for a Day in the BEx Report. I was thinking to use COUNT function but if Sales Document or Billing Document gets repeated then it will count those records which i don't want. correct me if i am wrong.
How to get Total no of Billing Document and Total no of Sales Document from a Multiprovider where i have Item level data is stored ?
Regards,
Komik Shah
Edited by: Komik Shah on Aug 20, 2011 5:33 PM

Hi,
Count can be achieved as per the following document. Create for Billing Doc and Sales Doc separately.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/009819ab-c96e-2910-bbb2-c85f7bdec04a
Regards,
Suman

How to restrict BOM explosion in Quotation and Sales Order

Dear all,
How can we restrict BOM main item explosion in Sales Order.
this BOM main item is having special order items which have to generate purchase requisition (item category - BANC),
with out exploding bom main item, can we generate a purchase requisition for BOM subitems, can any body explain me that how can we do that.
your suggestions will be highly appreciated.
thank you
Raghu Ram

Hi Raghu Ram,
The BOM explosion is controlled by item category.
In the item category configuration screen, under "Bills of Material/ Configuration", you can see "Structure Scope" field.
Select the one which is applicable to your case:-
"blank" - Do not explode material structure
A - Explode single-level BOM
B - Explode multi-level BOM
C - Configuration, no BOM explosion
D - Configuration, poss. with BOM explosion
E - Structure from Customer_Function (product selection)
Hope this helps
Regards,
Nicole

How to put Free goods with taxes in Sales Order?????????

Hello All
I am facing a problem that in my country the taxes should be paid for the free goods also that means if I sold 100 PC of material X and I gave 2 free pieces I will pay taxes for 102 PC but the system calculates the taxes for only the main 100 PC
Regards
Jacopo Françoise

HI,
When we dont to apply taxes we uses Normal process where we assign higher level item category to free good item category , and we determine it as TANN.
But to able to consider free good for taxes perpose we need to add R100 item category in pricing procedure with requirement 55 and Alternative condition base value as 28.
Along with that we have some setting in Item category whr you need to maintain B in Pricing relevence field (Pricing for free goods ).
With this setting you problem will be solved
Regards
Amol S

How can I start anew with Photos and clear the (minimal) stuff it has uploaded

I've about had it up to here with this new Photos scheme. I reorganised my Aperture libraries on both my iMac and MBA in preparation for this, delayed turning Photos on for a couple of days until I thought everything was ready based upon the limited advice that was out there, and then got stuck in an endless loop of "uploading" and "preparing" every time I opened Photos. There are 19,975 images in my Aperture library on the iMac. I was stuck at Uploading at anywhere between that number and 19,000 with no progress after hours of waiting. I tried all the tricks mentioned here including re booting, restarting the app, repairing/rebuilding the database, killing the "cloudd" process, etc.today Today when I restarted Photos, it now said I had 23,775 images to upload- 4000
more than I have-and of course it got stuck there, like it has for the last week.
I copied the previous Aperture library (pre Photos migration)back to my iMac and opened it in Aperture. Thankfully, all the photos I had taken on my iPhone this week during this Photos clusterphuck transition were in the Aperture Stream so I didn't lose any of those. I'm willing to give this whole thing one more shot. So i need some advice. How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
<Re-Titled By Host>

How can I start anew with Photos and clear the (minimal) stuff it has uploaded (about 6000 of 19,000 images in the last 7 days) ? If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
It is hard to say from your post, why the migration did not succeed in your case.
by "stuck on upload" do you mean, you opened the Aperture library in Photos, and Photos converted it to a Photo Library, and then the upload to iCloud Photo Library did hang? Or did already the upgrade to the Photo Library fail?
If you want the Aperture library to upload to iCloud Photo Library, it needs to be on a disk formatted MacOS Extended (Journaled) and the original image files must not be referenced. Referenced originals will not upload.
Also, the upload may hang, if you do not have enough free iCloud storage, orr if one of the videos or photos in your library is in an unsupported format or corrupted.
To start over, try to repair and rebuild the Aperture library before opening it in Photos. Try all Aperture Library First Aid options - starting with repairing the permissions. (Repairing and Rebuilding Your Aperture Library: Aperture 3 User Manual)
If I simply delete the Photos.photolibrary file will that do the trick and lt me start a new fresh library using?
You will have to delete the photos that are already in icloud too; otherwise you are risking duplicates.
Can you launch Photos at all? If yes, delete all photos in Photos and empty the Recently Deleted album. Wait for the deletion to sync to iCloud. Then delete the Photos.photolibrary.

I have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending

i have a problem with mail. the spelling and grammer check box before sending the messege is no longer there. I did everything but cannot get it back. is ther anyone who knows how to get the box with spelling and grammer checks before sending the mail.
Also the mail is acting very funny by not getting the rules work in a proper method. Is ther a software to repair mail.

i did both of them, but still the while sending the mail the diolog box is not showing up and also the spelling and grammer does not do the spelling check.
This problem just started for about 3 to 4 days now. earlier it was working normally.

How to build a multiselect with (nested) and and or conditions

Hi,
I have to tables: persons and categories. I would like to build functionality to enter values for categories, with a combination of and- and or- conditions (nested) to select persons.
Has anyone an example how to do this ?
Any reaction will be appreciated.
Leo

Reporting is not limitted in the MP you can perform in the same way as you do reporting on the single IC or DSO.
No its not like that like you can only select common fileds in both the info providers. you can also identify the fileds that are not common to both the info providers.
For example, the report need both customer's accounting number and sales order number. But accounting number only in accounting cube while sales order number only in sales order cube. Then how can I meet the requirement?
We have a constant selection option in the query designer while reporting on this fileds we will use this function.
inorder to meet the above requirement please check the below link which gives you detailed information regarding your requirement.
for more details chk the below link
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70dcd7b5-6a3d-2d10-c984-e835e37071a2?quicklink=index&overridelayout=true
Regards
KP

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book. Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can hav

I already have a new book that is ready to publish as an iBook. In addition I also have an app prepared for this book.
Please tell me how to upload this book (title is: "How To Cope...with life") and the app for it into your iBook Authors app so I can have it offered for sale @$0.99, in your app store?
FROM: Terry Weber, Email: [email protected]

https://itunesconnect.apple.com/WebObjects/iTunesConnect.woa/wa/bookSignup

Anyone know how to gernerate CRUD applications with flex and coldfusion?

Anyone know how to gernerate CRUD applications with flex and
coldfusion? I am working with a remote coldsfusion installation
with MS SQL and I don't have RDS.

You might investigate "squidhead". It is CF based. I'm not
sure if it has any Flex related features.
http://squidhead.riaforge.org/

How to find index name with primarykey and column on a table?

Hi,
how to find index name with primarykey and column on a table?
please help me.
Thankyou.

1 select ac.table_name, ac.index_name, aic.column_name
2 from user_constraints ac, user_ind_columns aic
3 where ac.constraint_type = 'P'
4   and ac.index_name = aic.index_name
5* order by 1,2,3
SQL> /
TABLE_NAME                 INDEX_NAME                COLUMN_NAME
ACTION_TABLE                 SYS_C0011033                NESTED_TABLE_ID
ACTION_TABLE                 SYS_C0011033                SYS_NC_ARRAY_INDEX$
CATEGORIES_TAB                 SYS_C0011038                CATEGORY_ID
CUSTOMERS                 CUSTOMERS_PK                CUSTOMER_ID
INVENTORIES                 INVENTORY_IX                PRODUCT_ID
INVENTORIES                 INVENTORY_IX                WAREHOUSE_ID
LINEITEM_TABLE                 SYS_C0011034                NESTED_TABLE_ID
LINEITEM_TABLE                 SYS_C0011034                SYS_NC_ARRAY_INDEX$
ORDERS                      ORDER_PK                 ORDER_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                LINE_ITEM_ID
ORDER_ITEMS                 ORDER_ITEMS_PK                ORDER_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                LANGUAGE_ID
PRODUCT_DESCRIPTIONS            PRD_DESC_PK                PRODUCT_ID
PRODUCT_INFORMATION            PRODUCT_INFORMATION_PK           PRODUCT_ID
PROMOTIONS                 PROMO_ID_PK                PROMO_ID
WAREHOUSES                 WAREHOUSES_PK                WAREHOUSE_ID
16 rows selected.

How to know the excess stock with in a sales order and line item

Hi,
i am running an MRP against a sales order and sales order line item. the materials are getting planned based on the requirement. but due to some reasons the production orders are confirmed with out consumption of the actual required quantity of the components. so the stock is kept ideal in the sales order though it is not required further.
do to some othere reasons also the excess stock of componenets exist. the PR or POs may also exist for the materials though they are not required further.
i am in need of a report for the excess stock or excess PR or Purchase order for a sales order.
please give me logic to find the excess things in that sales order and sales order line item. the Expensional message 26 is there in stock requirement list . but it does not give the excess quantity existing.
regards
madan

hi rajesh,
thanks for your reply. please tell me the logic to see when only partial quantity of sale sorder are delivered and also when no delivery is made also.
but manufactured and placed in stock.
please tell me the tables to follow and logic of going ahead with them.
regards
madan

How to restrict header text changes in sales order level

Dear Experts,
how to restrict header text changes in sales order level change mode
thanks

Hello Chandu,
how to restrict header text changes in sales order level change mode
In order to restrict changes to Sales Order Header Text, the appropriate User Exit would be USEREXIT_MOVE_FIELD_TO_TVCOM_H. With the help of ABAPer, you can include the simple logic on the basis of Header Text type such that whenever any changes are incurred on the Sales Order header text, updates would be prevented.
Please try out this approach and let us know your latest observation on this issue.
Regards,
Sarthak

How to assgn charge head with GL and Sales order

Similar Messages

Maybe you are looking for