How to assign a query and a template to a role

Hi gurus
Considering my little knowledge that i have of BI 7, I just want to confirm is this the way to assign a query to a role.
On the main menu of the query designer at the top left we have query-->Publish--->to Role and subsequently assigning the query to the specific role required and similar steps are followed to assign the template to the same role as well...kindly confirm this.........as i guess it is important to assign the query and the template to a the correct role so as to get the correct data.As our query is created for the manager role....points will be given

Hi Anurag,
Check this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a249a990-0201-0010-e18e-b2f5ed135497
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a101b894-0b01-0010-6c90-e70766b33256
Roles assigned to a BI 7.0 Consultant
Role assigning to a Query in BEX report
Assign points if this is helpful...........
Rgs,
I.R.K

Similar Messages

Authorization to query and web template in BI 3.5

Hello
I need to grant users athorizatio to the WEB template and its query. Query is based on Multiprovider.
Should I save query and WEB template to existing role and grant authorizaion to tis role or I also need to grant authorization to multicube and all cubes underneath?
Thanks

Hi,
You need to assign two objects for authorizing web templates and query..
S_RS_COMP AND S_RS_COMP1... in both these object you need to assign appropriate roles and activities.
S_RS_MPRO object to assign authorization to MP.
Regards,
Anup
Edited by: Anup Chaudhari on Dec 3, 2009 8:42 AM

How to assign a query retrived value to a user defined object in a table

how to assign a query retrived value to a user defined object in a table

Rajeshwar,
If you use the "Search" feature in this forum, you should be able to find helpful links to similar questions. You could also look at the RecordSet and DoQuery documentation in the SAP Business One SDK Help Center documentation to assist you with your question.
HTH,
Eddy

Filters Query and Web Template

Dear All,
Many reports use filters in both the query and the web template. What
is the difference?
Regards,
KS

the filter used in query and web templates are same
there is no difference between filters used.
as webtemplate uses the same query as its data provider so it is going to run the same filters.
for e.g. if u have query x then if there are filters in it .
if u have webtemplate y , and u have to assign a data provider to webtemplate which is nothing but query itself....
so if u run webtemplate u will at the end execute query x only...
now wat is filter.
filter means it will filter out that data.
for e.g. if u created a variable for calendar month and u restrict it so that user can enter the calendar month value range when they execute query x....
then if u execute query x
then upon its execution the variable will pop u p and it will ask u to enter range of calendar months
lets say u enter 1/2007-12/2007
so u r query executes and it will only bring data for year 2007.
now if u wish to see the data of 2006 and try to restrict it in Context menu or Restric screen, then it will display as NO DATA.
this means it will filter the data for particular year.
so if u wish to see the data for all years
then dont create variable and dont restrict Calendar month
Instead bring calendar month in Free characteristics
so later u can run the query for different years.
i hope u understand

Variance Scaling in Query and Web Template Showing Different Results

Hi experts,
I have the following problem - variance scaling in my query and web template are showing different results.
My variance in column is set as follows:
Formula: NODIM(A % B)
Scaling Factor: 1
I have a structure in row that uses Scaling Factor of 1,000.
Let say the value of Column A is 120 and Column B is 100.
When I execute the query, it will show 0.02
However, when I execute the web template it will show the correct scaling i.e. 20.
May I know what can I do to correct above scaling error?
Thank you!

You can not remove the scalling factor, but once you check the checkbox below the dropdown menu, the scalling factor will go away.
I checked at my end and when I set the scalling fact as 1, I was getting 9.9% while I was expecting 9900%. When I removed the scalling factor I started getting 9900%.
I would let you know if I came across anything else.
What about the unit of Column A and B. Are they same or different?
- Danny
Edited by: Danny Matt on Jun 22, 2009 1:54 PM

IE error of query and web template

Hello experts,
We had completed the configuration of " Integration into Portal"
successfully.
Query and web template can execute successfully via "Execute" button.
After click "Execute" button, query or web template display the result
in IE.
And we can use right-click menu to do all of operation at beginning.
But after we click the right menu a few times, it will occure error.
The error information as follow:
Line : 8914
Char : 2
Error: 'initMenus[...].windowHeight' is null or not an object
Code : 0
URL : http://jt-
pldev.gnpjv.cgnpc.com.cn:50000/irj/servlet/prt/portal/prtroot/com.sap.ip.bi.web.portal.integration.launcher
Is there any solution? Thank you.
Best Regards,
Chen Jianguo

same here.
Internet Explorer 7, web templates or web analyzer:
1. open context menu with right mouse key
2. click on a free area outside the menu, to close the menu
3. opening the menu do not work anymore. buttons do not work anymore either.
searched notes, sdn, ... patched all to the newest level...
still the same error.

How to assign a user and position to a release code .

How to assign a user and position to a release code ?
I tried in SU01 but the data is not getting reflected in the table
T16FW. from where the rule (20000026) is picking the user .
is there a transaction to do so ?
Thanks in advance .

These are done in SPRO. Search for release in SPRO, you will find your answer.
Regards, IA

Plz help don't know how to create a query and link it to a UDF

hi,
i am new to business one and however hard i am trying to use a query to link it to a UDF, it is not working. i think i am doing the whole thing wrong,so ill just post one problem i have and if any one of u can explain to me in steps i may be able to learn to link other queries and UDFs.so plz help me out .
problem:
i want to display the account balance of every customer/vendor whenvever i open a marketing document. i have created a UDF for the marketing documents in the title with name and description 'account balance'.
Now how do i link the customer/vendor name field to this UDF so that the query generated will show the account balance of the corresponding customer/vendor.plz tell me in steps as to what tables to choose ,what fields to choose, what conditions and relatoins to use in a query wizard
thank you

hi,
A/R invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OINV.CardCode]
A/P invoice
for name UDF:
SELECT T0.CardName FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
for balance UDF:
SELECT T0.Balance FROM OCRD T0 WHERE T0.CardCode = $[OPCH.CardCode]
FOR OTHER FORMS ONLY CHANGE THE END OF THE QUERY FOR Example
$[OPCH.CardCode]
OPCH is the table name, change it to other table.
save the query and set it to customer code for refresh in A/R invoice
save the query and set it to Vendor code for refresh in A/P invoice
regards
sandip

How to Assignment between Material and Account Assignment Group

Hi,
When we are creating a sales order with material ABCD, then in material line item -->under Billing Document Tab --> in Accounting screen, there is field Acct asgnmt grp (Account Assignment Group).
From where we can assign between Material and Account Assignment Group, after that it automatically pick in sales order creation.
Please guide..

Please refere to below link it may help.
Re: how to configure new account assignment group of material
Thanks Dev.

How to assign output type and trigger printing in ABAP

hi all,
i have create invoice by using BAPI_BILLINGDOC_CREATEMULTIPLE and create header/item text with CREATE_TEXT.
please advise how to assign the output type and trigger immediate printing after this.
thanks.

Hi Reetha ,
This is a functional setting , and should be done by some functional guy. The setting can be done by NACE.
Just follow the path : NACE - > Select V3 for Billing - > Press Output type Button Just above - > Assign Output Type and
then Assign Output program and form in PROCESSING ROUTINE comes into left. Set this output type for immediate print.
Whenever You create a billing document by BAPI with this document type , the print out will be fired immediately.
Hope it will solve your problem.
Thanks.

How to assign file extension and custom icon to executable?

Hi all,
I was reading an old thread about this issue:
http://forums.ni.com/ni/board/message?board.id=170&thread.id=116925
I need to try to do this. My application uses a custom file extension (i.e. .abc). Upon installation I would like to:
1. Assign My App and custom icon to the file class (extension .abc).
This could be done by manipluting the registry (http://msdn.microsoft.com/en-us/library/bb776856(VS.85).aspx)? This could be a problem with Vista s unless registry operations occur during installation any changes are placed in a VirtualStore, correct?
2. Enable the double-clicking of .abc file type to pass the data in the file to my VI (exe).
According to the File Handling Guidelines of Jean-Pierre Drolet (http://www.openg.org/tiki/tiki-index.php?page=File+Handling+Guidelines) the best way to do this may be using LabVIEW as an ActiveX server.
I know that when I build an executable (or installer?) there is the option to enable LabVIEW to act as an ActiveX server. This much I know I need to do.
I thought I would open this discussion again as others may be interested and there doesn't appear to be a completely clear solution available. Please do contribute where you can.
Cheers,
Battler.

battler. wrote:
My application consists of Event Structure.
How to register for ommand line event so that when a user double-clicks on a .abc file I can handle the opening of it?
This needs to work (the files need to open) not only when the application is closed but also when it's already open.
Anyone have ideas?
The solution to that is to implement a DDE server in your application (and add DDE entries to the registry on installation). There are still DDE functions in LabVIEW vi.lib\Platform\dde.llb but they are considered depreciated and have been removed from the palette, also because Microsoft is trying to tell everyone that DDE is depreciated and sort of unsupported too. But it is still the mechanisme to pass actions from the shell to running applications.
I hesitate to send you over to lavag.org where there have been some discussions about this years ago. If you go there you would do good to employ a friendly attitude. That board is run all by enthusiasts and idealists and they are all great folks but react not very friendly to people with an attitude.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

How to delete the queries and WAD templates from the SAP BI

HI,
We had a task to delete the list of quires and WAD templates from the SAP BI landscape(development,quality and production servers)
Please suggest the process to follow for removing the quires from the SAP BI landscape.

Hi Venkata,
I assume that the DEV-QA -PRD are in Sync with each other.
When you are deleting a query from the DEV,it should ask for a NEW transport request.IF not it means it is collected in some other request ,may be in NA or in Junk request.So see to it that it is FIRST saved in your request and then using RSZDELETE T .Code you can delete it.When you transport the request to QA or to PRD ,the query automatically gets deleted from that landscape.
Let me know if there are any issues.
Rgds
SVU123

Read / Write Security from Query and Display Templates

When you assign a role to the READ access of the Security tab of either the Query or Display template, this means the user can only view the report on the screen.
My question is...
When you assign a role to the WRITE access of the Security tab of either the Query or Display template, DOES this means the user can enter information on the screen? Or is there another meaning to the WRITE section?

Please look at the bottom of this page:
<a href="http://help.sap.com/saphelp_xmii115/helpdata/en/Getting_Started/Template_Editor/Query_Editor.htm">http://help.sap.com/saphelp_xmii115/helpdata/en/Getting_Started/Template_Editor/Query_Editor.htm</a>
Writer Roles is a design time template editor permission to make physical changes to the template itself.
Regards,
Jeremy Good

How to write SQL query and apply aggregate functions on it

Hello experts,
Iu2019ve a task to write SQL query on tree tables and do inner join on them. Iu2019ve accomplish this task by using T-CODE SQVI. However now I need to write a query and apply SQL functions on it i.e. Add, Count, Max and Min etc. Please can someone tell me how I can write SQL query with aggregate functions in SAP?
Thanks a lot in advance

HI Mr. Cool
you can see the below code for using aggregate functions.
where ARTIST and SEATSOCCU are the field names for which you want to perform these functions.
DATA: TOTAL_ENTRIES TYPE I,
      TOTAL_ATT TYPE I,
      MAX_ATT TYPE I,
      AVG_ATT TYPE I.
SELECT COUNT( DISTINCT ARTIST )
       SUM( SEATSOCCU )
       MAX( SEATSOCCU )
       AVG( SEATSOCCU ) FROM YCONCERT INTO (TOTAL_ENTRIES, TOTAL_ATT,
MAX_ATT, AVG_ATT).
Thanks
Lalit Gupta

How to create the Query and T Code for Special Reports

Dear Freinds,
Could any one advise the process to create the Query and the T code for some special combination of reports. Where can we find the documentation on this if that exists?
Thanks for the help.
Regards
Moderator: Please, search SDN - you'll find the answers

HI
Go to Tools -->ABAP WorkBench -->Utilities --> SQVI QuickViewer ( Query Builder)
Go to Tools -->ABAP WorkBench -->Utilities -->SAP Query -->SQ01,SQ02,SQ03
first create Infosets in SQ02, Assign Infoset to UserGroups in SQ03 and create a Query in SQ01.
Create a Transaction Code in SE93.
regards
Venkat

How to assign a query and a template to a role

Similar Messages

Maybe you are looking for