How to assign Asset number to PP work center -reg

Hi,
When we create PP Work center  through CR01 can we assign the asset number ? 
or   while creating asset number through AS01 can we assign the PP Work center ?
Our major issue is
FI : ASSET
PM:Equipment
PP: Workcenter
we  are not able to link .  we need to have same cost center for all the three . but as of now we dont have the link for the three and what ever cost centers we assignsystem is accepting
how to solve this ?
i could not find any fields in work center either to assign asset or equipment ?
only in equipment i can give PP work center but how it links all the three Asset , Equipment and Work center ?
regards,
madhu kiran.

HI
In euipment you can assign the PP work center and from the asset AS02/AS03 go to environment > additional  amster data > you can get the cost center assigned to asset fro this you can relate the cost center to all three.
Hope it will help u
Rgds
Anupam Sharma

Similar Messages

  • Assigning Asset Number as Account Assignment Object in Depreciation Run

    Hi,
    We want to assign Asset Number along with Cost Center as an additional Account Assignment Object in our Depreciation Run. For this we have maintained Asset as an active object and assigned it to the Depreciation Area 01 and activated it for all Transaction type "*".
    However, when we see the FI Document Posting, we get Cost Center number from the Asset Master record posted to Depreciation account but a "*" comes in the field of Asset Number in the FI Document? Is it possible to have asset number also in the FI document?
    regards,
    Chintan Shah

    Hi
    Thats standard behaviour
    Its not possible because, one consolidated document is posted in FI for lots of assets.. The posting happens in a batch mode.. thats why, the Asset No is displayed as *
    For Asset wise depreciation reports, you can see reports like S_P99_41000192 - Posted depreciation by asset and posting period  and S_ALR_87010175 - Posted depreciation, related to cost centers
    Br, Ajay M

  • How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

    How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

    Hi,
    First go thourh the FM import export parameters list.
    Try to create an internal table of type INRI-NRRANGENR for number ranges.
    We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
    Try to create the ncessary ones using this FM.
    In the Exit, EXIT_SAPMM06E_001,
    the Export parameters are-
    EKKO-EBELN- the PO ios created with in that specified range
    Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
    Try to code this in the Include provded and keep Breakpint and check the PO number generated.
    Reply if u need more help on this.
    Reward if helpful.
    Best Wishes,
    Chandralekha

  • Error:- How to assign Partner Number (KU) in R3 System [Idoc(KU) to File]

    Hi ,
    In Idoc to file Scenario (KU to LS), how to assign Partner numbe (KU) in R3 Sender system.
    I m getting below error:-
    No partner profile (outbound parameter) could be found using the following key:
    Do the needful.
    thanks
    Anshul

    Yes,  I have the partner profile maintained in we20 of type KU
    In We19, it is showing error:-
    No partner profile (outbound parameter) could be found
    For Example- For Logical system it is possible through  SALE

  • Assignment of activity group to work center

    Hi,
    We want to assign activity type to work center more than six,
    how we can assign activity type more than six to work center?
    i have created activity type group in klh1,
    in activity group i have assigned activity type more than six,
    How we can assign activity type group in work center?
    Regards
    Gajjen

    HI
    It is not possible to assign more tha six actvities to a cost center as per SVK defined in the WC.
    Check with the business process field for assign  with your CO guy in thw WC.
    A business procedure within an enterprise that uses resources and can involve activities from a number of different cost centers in a controlling area.
    When executing a business process, activities can be utilized for several cost centers of a controlling area.
    Check and revert
    Regards
    Anupam Sharma

  • Error when assigning the personnel no to work center

    Hi,
    I have uploaded the HR mini master.Now when I am trying to assign the personnel no to work center it gives me an error as to no objects found. Although I am able to see the list in F4.Checked the validity of both the masters (HR and WC).
    Please suugest!
    Regards,
    Meghana

    Hello,
    Have you tried to assign personnel number one by one ?
    You said you checked the validity for both WC and HR.Did you mean you checked the validity of personnel number you tried to assign ? Also check the relationship period in the pop up screen before F4.
    Regards,
    Deepak

  • Number Range for Work Center

    Hello All
          Am having a little concern regarding the number range for Work Center, kindly let me know where the number range for Work Center is maintained or from where it is picked up when we are using external no range assignment for Work Centers.
    Regards,
    J K Tharwani

    Thanks Sir for your reply,
            Actually the requirement is the client want that Equipment number must be the same as the Work Center Code, and Work Center code which i have decided is something like 0101001 & if i give the external no to the Equipment then the system doesnt take the same number instead it takes 101001 i.e. it ignores the initial "0" in the work center code. Actually I wanted to see the no range from where the work center numbering is being picked up, but later on i came to know that there is no such no range setting for work center instead it has contol from no range for object type. Shall look forward to your valuable inputs & guidance.
    Regards,
    J K Tharwani

  • How to track chnages done to a work center in past

    Hi all,
    How to track chnages done to a work center in past.
    I have tried Cr10 t cdoe, when i input plant and kept all other fields blank,and still it is not generating any output.
    Am i missing anything,is ther any other tcose or table,pls guide
    Thnx
    HKR

    Hi,
    1) You have to activate Change document indicator in the Transaction OP40 for the Workcenter categories.
    2) And for what are all the fields you wanted to capture the changes, for those data elements you have to ensure that change document is activated in the data dictionary.
    These are the pre-requisite for getting change documnets for the work centers.
    Regards,
    R.Loganathan

  • Assign a report to a work center

    Dear Experts,
    I would like to add a report view to my custom work center. Do you know why this error message appeared? What is the condition for a work center to be used for report assignment?
    Many thanks in advance
    Cheers
    Linh Hoang

    Hello Linh,
    I would suggest you the following, in order to be able to assign a report to a Work Center View you need to create stable anchors for your WoC view in the UI Designer.
    The ReportAssignment-Anchor can be added via UI designer. Plus, the work center view subtype should be "Application".
    For even more details, you might refer to help description:  Developer Desktop => Analytics => Business and Technical Background => Defining Analytics Content
    I hope it helps
    Cheers
    Tales Caron
    Support Engineer

  • How to find out number of  years worked using sql

    Hello,
    How to find from a table which has hiredate and should return number of years worked with range like 0-5, 5-10,10-15 etc.
    Any help is highly appreciated.
    Thanks

    I think this query can solve your issue
    SELECT CASE yeared,COUNT(CASE) FROM
    SELECT
    CASE
    WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=5 THEN '0-5'
    WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 5 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=10 THEN '5-10'
    WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 10 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=15 THEN '10-15'
    WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 15 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=20 THEN '15-20'
    WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 20 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=25 THEN '20-25'
    WHEN MONTHS_BETWEEN(SYSDATE,hiredate)/12 > 25 AND MONTHS_BETWEEN(SYSDATE,hiredate)/12 <=30 THEN '25-30'
    ELSE '>=30'
    END CASE
    FROM scott.emp )
    GROUP BY CASE
    Regards.

  • How to calculate the number of days worked for a given period

    I need to calculate the number of days worked by contractor employees for a time period to be entered by a user. I am building a query on an infoset which contains employee information including contract start date and contract end date for the employee.
    Ideally I'd like the user to enter the time period which should be reported on e.g. 01.08.2009 to 31.08.2009
    The report should then identify all the contractor employees which were working during this period and to work out how many days they worked during this period. Obviously the contract start and end dates could fall both inside and outside the reporting period.
    Can this be done and if so, do you have any suggestions as to how to do it?
    Thanks.

    hi
    So here you will first have to load the master data table employee in one internal table and read this table with the variables entries.
    Your code in the reporting exit should look like that.
    bye
    data : wa_employee type /bi0/pemployee.
    When 'ZDATE1'
    if i_step = 2.
    LOOP AT i_t_var_range INTO loc_var_range WHERE vnam = 'ZDATE2'.
    clear l_s_range.
    clear wa_employee
    1- select the entries from table employees
    select single employee dateto datefrom
    from /bi0/pemployee
    into corresponding fields of wa_employee
    where dateto le loc_var_range-low
    and datefrom ge loc_var_range-high.
    if sy-subrc eq 0.
    CALL FUNCTION 'FIMA_DAYS_BETWEEN_TWO_DATES'
       EXPORTING
           i_datum_von  = wa_employee-datefrom
           i_kz_ult_von = 'X'
           i_datum_bis  = wa_employee-dateto
           i_kz_ult_bis = 'X'
           i_szbmeth    = '1'
       IMPORTING
          e_tage       = no_days.
           l_s_range-low  = no_days.
           l_s_range-sign = 'I'.
           l_s_range-opt  = 'EQ'.
          APPEND l_s_range TO e_t_range.
              ENDIF.
            ENDIF.
    endloop.
    ENDIF.
    Boujema

  • How to increase the number of HTTP Worker Threads?

    Hi Buddy,
    I am using the lateset NW AS Java. It's a DEV system and the number of HTTP Worker Threads is 5.
    Do you know how to increase the number?
    What is the number in a Production System?
    Thank you!

    Parameter name: FCAServerThreadCount
    It's under Service->http.
    Use config tool for NW70.
    For NW71 and above use NWA and config tool.
    Also refer this -
    http://wiki.sdn.sap.com/wiki/display/JSTSG/%28JSTSG%29%28Web%29FAQ-FCAServerThreadCount

  • How to assign Line Number for Lines when click on Add More Lines

    Hello All,
    Kindly help me to assign line number for the lines which are added through Add More Lines button on an Advance table. If user clicks on the button Add More Lines then there are 5 lines get inserted at a time but I am not able to handle the line number for them.
    Similarly, if user delete any of the line then I need to re-order them.
    Kindly help and share if there is any sample code.
    Thanks,
    Sandy

    Hi,
    Check if this link helps you :
    Re: How to display serial numbers in the results table region
    --Sushant                                                                                                                                                                                                                                                           

  • How to assign request number to a report painter

    hi all
    i have to assign a request number to the report that i have created using report painter.
    please let me know how to assign a request number.
    thank you all in advance.

    Hi,
    If you are creating new report once you press Create on SE38, it would give you a screen where you enter the program details..
    After this You  get a Create Object Entry Screen on which you have to deifne Package ... Please don't select package as $TMP as it would not allow you to create request..
    Select relevant package and Press Save..
    It would give you another screen with blank Request Number..
    Please press the Create Button..
    The system will create a request Number and display in the request number..
    Press Save ..
    Hope this helps..

  • How to create a copy of a Work-Center?

    Dear Experts,
    in SAP CRM 7.0 i have made a copy of the Work Center SRV-MD. The name of the copy is: ZSRV-MD. The most important data can be found in the following table:
    Workcenter Standard  Workcenter Copy    Logical Link  Destination ID     Component
    SRV-MD                  SRV-MD             SRV-MD-WC     SRV-MD-WC          WCC_SRV_ACC_PRO
    SRV-MD                  ZSRV-MD             ZSRV-MD-WC    SRV-MD-WC          WCC_SRV_ACC_PRO
    I want to use both Work-Center for the same Role. My problem is that I want to define for both workcenter different Logical Links. But when I change the links on the first workcenter it is changed too for the other one.
    Do I have to create a Z-Component to avoid that? The problem might be that the same Destination ID is used which is leading to the same Component?
    Best Regards
    Oliver

    Hi Experts,
    under:
    Customer Relationship Management -> UI Framework -> Technical Role Definition -> Define Work Area Component Repository
    I have defined a a new Target-ID (ZSRV-MD-WC) for the created Z-Component: ZWCC_SRV_ACC_PR (Copy of WCC_SRV_ACC_PRO).
    Then under:
    Customer Relationship Management -> UI Framework -> Technical Role Definition -> Define Navigation Bar Profile
    I have created a new Logical Link with the following data:
    Logical Link ID: ZSRV-MD-WC   
    Type:                B Work Center
    Target ID:         ZSRV-MD-WC 
    This Logical Link I have assigned to the Z-Work-Centre:
    Work-Center ID: ZSRV-MD     
    Logical Link:       ZSRV-MD-WC     
    But the problem is that the system still is calling the Standard Component WCC_SRV_ACC_PRO. In which method I can make a debug or look for the problem?

Maybe you are looking for