How to assign Authorisation to a transaction code
Hi ,
I have created a report and i have assigned a transaction code to it.
But i want only 3 users to access the transaction code when others try to access the Transaction code there should be a message saying that they are not authorised to view that.
Can someone help me out in this regard
Hi Arvind,
Go to TCode SE93 enter your Tcode and Change it. There enter Authorization object as S_TCODE.
Cheerz
Ram
Similar Messages
-
How to assign function module with process code in IDOC ?
how to assign function module with process code in IDOC ? and what code i have to write in that function module for custom IDOC ?
helpful answer will be rewarded?Hi,
First goto transaction we42 -->editing mode --> new entries -->give name of your process code and description --> processing with alv service and function module -->then press enter -->after that enter the name of the function module you want to associate from the drop down and save it.
Thats the way to assign function module with process code.
In that process code we will have the Function modules and Bapi's which will take the data which we are sending through IDOC and then process it.
for example: i am triggering the IDOC for every purchase order created then this process code in the receiver system will take the data which i have enetered in the sender system to create the purchase order and process it and creates the same purchase order in the receiver's system.
Reward if helpful.
with regards,
Syed -
How to assign authorisation object to user
hi,i have created authorisation object now i want to assign it to role and
then to user
how to get this.
i went into pfcg transaction but i didnt know how to assign authorisation object to
role and then to user
can any one tell me how to procedd further?
Message was edited by:
venkat sHi Venkat,
When you create authorization object in RSSM you only assign info object.
How did you assign respective values?
once your authorization object is saved you should find it in PFCG. even if you go to expert mode for profile generation
Check tecnical name.
Alternatively instead of inserting manually go to selection criteria and the system will display all active authorization objects and you can choose your object.
Jaya -
How to activate background option in transaction code S_ALR_87013558
Dear All
Kindly guide me. How to activate background option in transaction code S_ALR_87013558
Regards
Sanjeet KumarHi Sanjeet,
I think the thread that you have read have different program number.
Please follow the below mentioned steps:
1. First execute report S_ALR_87013558. Then go to System->Status and copy the program number from there.
2. Go to se38 and put the program number and execute.
3. Go to Program at the top menu and now there you can see the option Execute in Background available there.
4. Execute and save it as variant.
5. Go to SM36, mention the job name and enter. Put the variant and save.
6. Go back, and go to start condition and start immediate or as per date/time desired.
Try this, if it works.
Regards,
Amit Rajoria -
How to assign screen variant to transaction variant
Hi ALL
I HAVE CREATED A SCREEN VARIANT HOW TO I ASSIGN IT TO TRANSACTION VARIANT , PLS GUIDE ME ON THIS ITS IMPORTANTSunaina,
Transaction Variant:
Transaction variants are client independent. That means that in order to transport them you are creating a workbench request. Client independent means that the moment you save your changes, they will appear in every client on the same box. If for instance you have 3 development clients, by creating a transaction variant you will be able to see it in all 3 clients. You won't need to use transaction SCC1 to transport your changes to the other development clients.
Say for an example you need to deactivate (output only) the pricing date and material pricing group field in VA01/2.
You can use the T.code SHD0, choose your transaction variant here, further choose your screen variant.
Next select your screen variant and in the Menu bar select Variant> change with processing>Make repairs in foreign namespaces only if they are urgent> Continue(Enter)>again 'enter'>Object can only be created in SAP package>continue(enter)> Exit and save >This variant contains other screens, adopt these as well?>enter>enter> scroll down to the entry 'pricing date' or VBKD-PRSDT make the necessary changes and save.
The system will prompt to assign a package and request enter the necessary values.
Crux:- you just make fields as display, or 'supress', knowing your requirements
Transaction Variants to make fields Mandatory, Hidden or Display. Also applicable to screens and tabstrips.
You can hide unwanted screens and fields in any of the standard SAP programs without changing any of the standard programs. Additional features such as making the variant as default on the standard SAP transaction code is only available as of 4.6x.
Transaction SHD0 - Create a variant for the required transaction by changing the layout through hiding fields and screens.
Transaction SE93 - Create a variant transaction (e.g. for VA02 = ZVA02).
o Next allocate the transaction variant to this variant transaction.
In 4.6c, you can default your transaction variant as the standard variant. (SHD0 - Edit -> Activate/Deactivate as standard variant)
One more feature available, instead of creating a new T.Code...you can simply assign the Transaction Variant in the Sales Document Type in T.Code-->VOV8.
Hope this Clarifies your Doubt and Please Reward If Really Helpful
Regds
MM -
How to fill tables of VFBS transaction code?
Hi all,
we have modified standard status U of program SAPMV45B in order to have a new button to show an ALV.
But when we press 'back' button of the ALV it doesn't work properly and it doesn't return to the corresponding transaction where we were (VA01/VA02/VA03).
We think we have not filled properly the tables of VFBS.
Any ideas of how to fill them?
Thanks in advanced.Hi,
The problem can be because of below reasons:
1. At first time saving of your Transaction code, you could have selected as Local Object.
2. You could have assigned a new TR to the Transaction.
Solution:
1. You can delete the transaction code once. And again generate the transaction code, and save it in your old TR itself.
Regards,
Vishal -
Providing all authorisations except basis transaction codes
Dear all,
I am planning to give SAP_ALL authorisation to users in the system.
but I need to restrict such that they dont have access to critical basis t-codes like (SU01, PFCG, SCC4 etc..)
Can you pls let me know how to perform the same.
Is there any predefined roles to do the above....
I am using an ECC 6 server. This is a normal test server.
Any suggestions and ideas are warmly appreciated.
Regards,
chandru.Hi Chandru ,
If you want have a customized role SAP_ALL and exlcude all BASIS and Security authorizations in the role following is one way of approach.
1) GOTO PFCG transaction and create a new role
2) Now go to MENU tab , here is transactions column , click on *FROM SAP MENU* and select all the fields except Admistration and CCMS options under TOOLS and now click on transfer.
3) this will transfer all SAP transaction codes in the system except BASIS and SECURITY transactions
4) Now go to authorization --> change authorization data .
Here inactivate the following :
BC_A --> Basis - Administration
BC_C --> Basis - Development Enviromment
BC_Z --> Basis Central Functions
And finally save and generate the role.
This will role will give you the access to all the SAP transactions of all the functions in the system except the critical modules BASIS and SECURITY.
Thanks & Regards
Kantikiran Duggirala -
How can I see all the Transaction Code that the client is using?
How can I see all the List of Transaction Code that the client is using?
Hello Sugauli,
Did you mean to ask
transaction types the client is using?
instead of
transaction code
If so, go to SPRO (in ERP system) and follow this path:
Sales and Distribution -->
Sales -->
Sales Documents -->
Sales Document Header -->
Define Sales Document Types
All the transaction types that are not used have an X in the column Block.
Easwar Ram
http://www.parxlns.com -
How to make VIP flag in transaction code fpp2 as non editable
Hi everyone,
Please guide me about:
How to make VIP flag in T Code FPP2 as non editable only for some particular users?
Is there any authorization object exists for this flag in FPP2 transaction?
Actually there are many users who have authorization of transaction fpp2. But we want only some particular users should have authorization of making changes to this flag.
Please guide with your valuable replies.
Thanks and RegardsHi...MP Vashishth
try to creat an Authorization Management ... in customizing...
Cross-Application Components --> SAP Business Partner --> Business Partner --> Basic Settings --> Authorization Management
Creat an Grup..and others steps...!
and when finish clic on Generate and Assin Authorization !!!
I Hope it Help !
regards
Andre Frugulhetti
Edited by: Andre Frugulhetti on Sep 22, 2009 9:38 PM
Edited by: Andre Frugulhetti on Sep 22, 2009 9:39 PM -
How to post stock and what transaction codes
Hi gurus
If I created new material how can I post stock in to the material to process.
Ex:MMBE for stock checking.
But what is the t -code to enter some stock at materila.
also how what other transaction I can for stock posting at various scenarios.(I mean what other transaction codes for different things)
Thanks
KrisHi
Enter T.Code: MIGO
Select : Other
Movement Type : 561
In the item Details Entyer the material . enter the quantity. Plant and Storage Location.
Save it. CHekc the Stock In MMBE for that material.
Thanks & Regards
Ram -
How to link reort to a transaction code
HI
I want to know that how to link a classical report to a transaction code.
Thanks & Regards
Ankush
Moderator message : Not enough re-search before posting, see forum rules. Thread locked.
Edited by: Vinod Kumar on Jul 27, 2011 4:46 PMOtto and Chintan,
Yes I need the silent SAVE option enabled through this button.
Its offline scenario. User saves the copy of the form locally.
In the form there will be a SAVE button.
When user clicks on it, the data he entered before click should be saved like CTRL + S.
Regards,
Srinivas
Edited by: srinivas aare on Feb 18, 2010 7:16 PM -
Authorisation roles and transaction codes for users(MTO--PPmodule)
Hi !!!
GURUS !!!!!!!!
I am working here on live project for make to order scenario.
We are using only batch management.
Could you give me transaction codes for users for authorisation roles.
All codes from start to end scenario.
Regards,
NitinDear,
You have to do the JRM - Job role mapping. The list of transactions cannot be decided commonly across all implementations, as per your Business process definition you have to list the transactions invovlved and which business roles are required for that.
One example: PP_Planner is a Role, this is applicable for the planning person, he will be given transactions related to SOP, DM and MRP, he will not be given transactions related to SFC. Its vice versa for a operations person.
Thanks & Regards,
Vijaya Bhaskar A -
How to create transport request with Transaction Code
hi,
i have made a Report and then i have transport it to QAS server but mistakenly i transport the request without T-Code.
Now i want to make a new transport request with T-Code but can't understand where i can make this new request because when i go to this path*UTILITIES -> VERSION MANAGEMENT -> * it shows me the request which i have transport it.So i want to make a new request with Transaction Code included in that request.Kindly guide me where i can make this request.
Thanks.hi,
Goto se93 give your tcode and press chagne,after entering into it make some change and click on save, it wil ask for TR. Save it and export it to quality.
Regards
harris -
How to find the list of transaction code based on a field ?
Hi Gurus
I have a unique requirement.We are adding a new field into our system and want to know which all t-code contains that field ? So that we can update the user training manual. Can some one tell me the ways and means of finding the list of all the t-code ( or where used e.g functional area ) based on " a field" ?
Thanks in advance
SNHi,
1. Tcode KS02.
2. click on the text "Cost Center"
3. hit F1
4. Click on the technical information
5. in the next screen double click on Field name :KOSTL
6. Select the row for the component KOSTL
7. Click on the display list
8. In the next screen, in the object name:KBAS
Drilldown to transactions.
Here you get a complete list of the transactions.
Hope its useful.
thanks. -
How to Execute FEBP and FEBA transaction codes
Hi All,
Can you please explain me how to configure customizing for FINISTA in EBS.
And also can you plz explain how to execute the t codes FBEP and FBEA.
regards
MadhaviHi
Enter T.Code: MIGO
Select : Other
Movement Type : 561
In the item Details Entyer the material . enter the quantity. Plant and Storage Location.
Save it. CHekc the Stock In MMBE for that material.
Thanks & Regards
Ram
Maybe you are looking for
-
Form 16 - Issue on arrear amount
Dear all, I have run payroll of April, 2010 and also for May month with revision of salary w.e.f. April, 2010. There some employees are getting arrears. In form 16 when I am checking the amount of that wage type in emoluments paid (page no. 4) that i
-
IPod Nano Frozen please help :)
Hello, My 3rd Gen. iPod Nano has frozen on me. This is what happened in detail..: I turned my ipod on and it just came on stuck on a screen which is a song that is playing . The ipod says that it is on hold but it isn't. The volume bar is showing con
-
Retaining state on failover of SO
We have a ServiceObject that we need to mark for failover. The data that resides on this SO needs to be re-populated on the backup copy of the SO when it becomes active. My question is how are others handling the duplication of the data on the primar
-
I've this wsdl taken from the wsdl specification documentation. <?xml version="1.0"?> <definitions name="StockQuote" targetNamespace="http://example.com/stockquote.wsdl" xmlns:tns="http://example.com/stockquote.wsdl" xmlns:xsd1="http://example.com/st
-
PM Refurbishment Process used in conjunction with RLM (Remote Logistics Man
Hello Experts, I was wondering whether anybody had any insight or experience in making use of the PM refurbishment process inconjunction with the remote logistics management module? Linking between offshore Refurb order to onshore and then to vendor