How to Assign Business partner for Vendor Organisation

Hi,
We are in SRM upgrade from SRM 3.0 to SRM 7.0.
For Vendor organisation say 0 50002381 there is no Business partner assigned.
Under this organisation there are 200 vendors .
When i run the report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP
it is showing an error -No partner assigned
How to assign the Business partner for the organisation .
Please give your inputs
Regards
G.Ganesh Kumar

Hi Muthu,
Thanks for the reply
Already the SAP NOTES : 1372409 is applied.
I am running the Migration report: BBP_XPRA_ORGEH_TO_VENDOR_GROUP. I am getting an error
" Check mode 9: :Invalid Object on supplier node"
How to resolve this issue.
Already one more thread is open for this issue
Regards
G.Ganesh Kumar

Similar Messages

Assignment: Business partner for person '50000029' is not unique

HI,
In the past, whenever I use to create the employee using Tcode PA40, the corresponding Business Partner (BP) used to get created.
But now when I create the employee, BP does not gets created.
I checked using the program "HR_SYNC_PERSON" and found that whenever I select the employee option and execute it gives the following error(whenever I select the employee option and execute):
Assignment: Business partner for person '50000029' is not unique
Can you please help!
Regards
Manish

Oh, I understand. Earlier I misunderstood your statement.
So the CP is 50000029. Regardless, the point is still the same. SAP tried generating a BP to tie to CP 50000029. Your system HAS configured a BP number range. Whatever the next value of your number range is, seems like is already being used.
Go to the BP number range config and look at the next value. Look in transaction BP and enter that BP and see if you get any hits. My guess is that you will. You'll likely need to end up changing your business partner number range. You won't get unique violations for different OTYPE values.
What's your existing BP number range next value? What happens when you search for that value in transaction BP?

How to check Business Partner for archiving ?

Hi friends,
I want to check the BP for Archiving.
So I am trying to set the Archiving Flag in BP Status Tab
But the Archiving Falg Check box is never in Display Mode and so I am not able to check the BOx. What is the use of that box if it can't be accessed ? Any clues on how to check it ?
Many thanks
C.K.

Hi,
You can run DACONTROL transaction to set the deletion flag for business partner.
-Thanks,
Ajay

How to Assign Customized Form for Vendor Balance Confirmation - F.18

Dear All,
While executing the transaction code f.18. System is showing vendor balances with IDES logo. I want to assign the customized form. Can anybody tell me where to assign form fro F.18.
Regards
Sreenivas

kindly check in the configuration
SPRO-Financial Accounting-Accounts Receivable and Accounts Payable-Business Transactions-Closing-Count-Balance Confirmation Correspondence-Make and Check Settings for Correspondence-Define Form Names for Correspondence Print
Select the program "SAPF130K" which one is for balance confirmation. against this the form is attached

To assign business partner no. to central person

Hi
We are pulling org. structure form HR to SRM system. We are mainating the same central person as well as positon from HR system. But one of the central perosn in SRM is missing the business paterner due to which when I run BBP_BP_OM_INTEGRATE we get an error business partner no unique, I repaired the user I did not work. How to assign business partner to CP.
We are SRM5.0 ECS
with regards
Manjuanth
Message was edited by:
Manjunath Somashekara

Hi
Please try this ->
1.
Go to Web Transaction "Manage Business Partner". (BBPMAININT)
There are several options - go for "Employee for Business Partner" and enter in the field the supplier number or search for the supplier you want to create an employee for. Hit create and fill out the screen. The upper part of the screen creates the employee, in the lower part the user id (with which you logon) is maintained. The structure of the screen is asking all relevant elements needed to create a full SRM users and integrates the account into the Org Model.
For the central Org Unit for Bidders enter the Node Number for the Vendor Root.
How to assign contact person user id to Vendor uploaded from ECC?
OR
2. You need to go into Transaction BP, select the BP for whom you want to change their roles. Click on the change button and then you can select from the drop down field "Change in BP Role" the role that you need for that BP.
Business Partner
Other releated helpful links ->
Re: Central Person already exists
Re: regarding business partner, central person and organizational unit relation
Central Person and BP ID
How to delete Central Person?
Regards
- Atul

How to create Business Partner in CRM 2007

Hi gurus!! how are you? I´m a rooky to sap crm and I would like your help and guidance to know how can I create a Business Partners and Roles.
Whatever detailed help or documentation you may give me will be rewarded =)
Thanks a lot in advanced!!!
Lorena.

Hello!
In the WebUI there are different Business Partner Types (Person, Organization, Group).
From user perspective you can differentiate between:
- Corporate Account (Organization)
- Individual Account (Person)
- Group Account (Group)
- Employee (Person)
- Contact Person (Relationship) (Person)
All these Business Partner have an own Overview-Page. Usually you can create the Business Partner starting from the related Search-Result-List (by default the new-button is not available for Employees as a Sales Rep usually doesnu2019t create new Employees u2026).
You can assign Business Partner Roles to these Business Partners (there is an own Assignment-Block within every Overview-Page of a Business Partner). Some roles will also get assigned automatically, if you create this Business Partner.
However it is possible to assign multiple roles to the Business Partner. Itu2019s also possible to have different Views of one Business Partner. E. g. an Individual Account can also be a Contact Person for another Account. But here it is not the Role determining the View it is the Contact Person Relationship doing this.
The Role itself also has an impact on the UI of the Business Partner as dependent on the Roles some Assignment-Blocks are displayed or not.
I hope this was not confusing u2026
Best regards
Arno

Problem with BP. Assignment: Business partner person to user not unique

I have a problem with a user. They have no BP assigned in PPOSA_BBP. We have found a BP in transaction BP.
When we try the BBP_BP_OM_INTEGRATE the message BBP_UM_UI048 appear" Assignment: Business partner person to user not unique" .
Any idea about how solve this??
Best regards
Jorge

Hi
Which SAP version are you using ?
The user needs to be attached to the Org Plan. (PPOMA_BBP)
Have you maintained the Contact person for this USer in the Org Plan. (PPOMA_BBP) ?
Please check the consitency of this BP as well.
Have you read the documenattion of the Transaction -> BBP_BP_OM_INTEGRATE ?
If no, here it is..
Transaction -> BBP_BP_OM_INTEGRATE
Short text
Object Synchronization and Repair
Purpose
This report enables you to run a consistency check for the integration of HR Master Data and Business Partner data. If not all data exists for the business partner, you can first synchronize data. When synchronization is run for organizational units, the basic data (name, description) and the address data is included; when synchronization is run for central persons, bank information is included in addition to the basic data and address data.
Prerequisites
To be able to run this report, integration between Organizational Management and SAP Business Partner must be active.
Features
This section contains information about the functions you can use to select and output data.
Selection
The following options enable you to restrict the selection of objects:
Central Person
In addition to selecting central persons created during integration between HR Master Data and Business Partner data, you can also select central persons who have been created locally. However, central persons created locally are not checked for consistency.
Employee (object type P)
This selection option is only available in HR systems. The corresponding central person is displayed together with the person. Both objects are kept consistent in the Basic Data, Address, and Bank Data columns.
Positions
Business Partners (Employee role)
Users
Organizational Unit(s)
You can specify specific organizational units for the selection.
Business Partner (Organizational Unit role)
Note:
The selection objects Position, Business Partner (Employee role), User, and Business Partner (Organizational Unit role) are only available if an implementation of BAdI HRALX_HRALXSYNC_BADI exists.
Branch as of Organizational Unit
This option enables you to select all objects in the structure for one or more organizational units. You can also restrict selection according to one of the following object types:
Central Persons Only
Employees Only
Positions Only
Business Partners Only (Employee role)
Users Only
Organizational Units Only
Business Partners Only (Organizational Unit role)
Include All Object Types
Changes Since
All organizational units and central persons for which changes have been made since the last time all objects were synchronized are read. When all objects have been synchronized successfully, a new change date is set.
Note:
If a selection has been made but the relevant input field remains blank, all objects of a particular object type are read from the database. This condition can lead to a long runtime, therefore, SAP recommends you also enter a restriction.
Output
The organizational units and central persons that have been found are displayed in a list that includes status data.
To facilitate navigation, a hierarchical tree structure is displayed on the left-hand side of the object list. The branches are sorted according to the type of action that is to be executed.
If an implementation of BAdI HRALX_HRALXSYNC_BADI exists, checks from this BAdI are executed in the External Checks branch.
If you double-click on the folder icon in the navigation tree, all objects are displayed in the list.
Note:
Meaning of status display for data in the Basic Data, Address, and Bank Data columns:
Icon Message Text Meaning
Green traffic light Business partner does not need to be synchronized with HR object data All business partner data is consistent with HR object data.
Yellow traffic light Business partner does need to be synchronized with HR object data Business partner exists. The business partner data is not consistent with the HR object data.
Red traffic light Object data is new and must first be created for the business partner The business partner does not yet exist or the the business partner data is incomplete.
No traffic light Object type does not include this type of data Check type is not relevant for this object.
Activities
To integrate business partners or to repair selected objects, you must select the relevant lines in the object list and choose Execute. Any errors that occur are displayed after synchronization.
Hope this will help.
Please reward suitable points, incase it suits your requirements.
Regards
- Atul

How to Create Business Partner with fix number in t-code :BP

Dear SIr,
Normally I will set number range for auto to create Business Partner. In case , If we would like to crea How to Create Business Partner with fix number in t-code :BP , howe to do?
Please kindly advise.
THnak you and best regards,
Vimol

Dear Shobhit,
How to put the thread as you mentioned.
Best regards,

Error TTB1: You have not assigned business partner B1000 to a customer

Hi,
When trying to post the costs of a forex transaction we receive this error message: You have not assigned business partner B1000 to a customer ; Message no. FLBP116. When posting these costs (on a P&L account) we go through a finance interface to derive a CO object (network activity) from PS. Strange thing is that we don't have this error in Dev or QAS but only in acceptance which is a copy of prod... The interface works fine for costs from guarantees and L/C which goes to an other network activity in PS.
Any recommandations on this? The BP functionality has never been used befor by my customer.
Thanks in advance, and this a week befor possible go live...
Hans.

Update in PS was needed...

How can i maintain conditions for vendor sub-ranges

Hi All,
How can i maintain conditions for vendor sub-ranges. These conditions apply to all materials from vendor's sub-range.
Eg: vendor X has the two subranges R1 & R2. I want to maintain separate conditions for R1 & R2. When ever i created PO with ref to particular subrange that Vendor conditions has to be appeared.
How can i achieve this?
Could u pls suggest?
Thanks & Regards
Anilkumar Dalai

Hi,
First Create a Condition Table with field "Vendor sub-range" in M/03
Then create an Access Sequence using this Condition Table in M/07
Then assign this Access Sequence in the Gross Price Condition Type in M/06
Then assign this Condition type in Calculation Schema in M/08
Then maintain condition record for this condition type in MEK1
And then select the appropriate VSR Code in ME21N and check the Pricing.

How to use Business Object like Vendor or PurchasingInfo

Hi,
How to use Business Object ( like Vendor or PurchasingInfo ) from my Object?
For example:
CLASS myEntity DEFINITION.
          PUBLIC SECTION.
               METHODS: getVendor EXPORTING pVendor TYPE Vendor.
           PRIVATE SECTION.
           DATA: aVendor TYPE REF TO Vendor.
ENDCLASS.
CLASS myEntity IMPLEMENTATION.
METHOD getVendor
           pVendor = aVendor .
ENDMETHOD.
ENDCLASS

Hi,
I am giving u a demo Program for ur doubt.
REPORT demo_class_counter .
CLASS counter DEFINITION.
PUBLIC SECTION.
    METHODS: set IMPORTING value(set_value) TYPE i,
             increment,
             get EXPORTING value(get_value) TYPE i.
PRIVATE SECTION.
    DATA count TYPE i.
ENDCLASS.
CLASS counter IMPLEMENTATION.
METHOD set.
    count = set_value.
ENDMETHOD.
METHOD increment.
    ADD 1 TO count.
ENDMETHOD.
METHOD get.
    get_value = count.
ENDMETHOD.
ENDCLASS.
DATA number TYPE i VALUE 5.
DATA cnt TYPE REF TO counter.
START-OF-SELECTION.
CREATE OBJECT cnt.
CALL METHOD cnt->set EXPORTING set_value = number.
DO 3 TIMES.
    CALL METHOD cnt->increment.
ENDDO.
CALL METHOD cnt->get IMPORTING get_value = number.
WRITE number.
For more demo programs type 'abapdocu' in the command field
U will be getting some demo programs.
There select the abap objects.
Regards,
Jagadish

How to "PREPONE" Business partner Valid from date (Role: TR0600)

Hi Experts,
I created BP on 4/03/2011 and using this BP I created one Commercial Lease in Contract but while activating the contract system showing Warning message as mentioned below.
Role Obsolete: Master Tenant with Customer Account is only valid in period From 01.03.2011
Message no. REBPBP035
Diagnosis
The validity of role Obsolete: Master Tenant with Customer Account is restricted for this business partner to the period From 01.03.2011. However, the object to which the business partner is to be assigned is valid for a longer period (validity period of object: 25.05.2010-24.05.2013).
Procedure
Extend the validity period of the role to cover period 25.05.2010-24.05.2013 in business partner processing or assign a different partner to the object for the period in which role Obsolete: Master Tenant with Customer Account is not assigned to the partner.
Please provide me the solution to overcome this issue.
Thanks in advance.
Br,
CM

HI CM,
you have to change the date of assignment of the BP role accordingly (as
mentioned in the warning message) if you do not want the message to
appear any more. Normally, the assignment of a BP to a contract should
cover the whole validity period and if this is not given, the message
arises.
Please check the validity data of the role of the assigned business
partner. Therefore you have to go to the business partner maintenance
screen and there check the validity data of the BP role.
As the validity data of the role aren't easy to find I have attached a
screen shot for your information.
Hope this helps.
Regards, Franz

How to search Business Partner filter by country

As topic above, how to search Business Partner filter by country, which table is involve?
Appreciate your kind effort
Thx

Hi
1) you can use the function module 'BAPI_BUPA_SEARCH' to filter BP by country. In the address data field, you can enter country code (say IN for India) and this will return you the list of BP's belonging to the country.
2) You can use view BBPV_BUPA_ADDR to see the BP's for a particular country.
for this view, if you look at the "Table/Join Conditions" tab, you can see the underlying tables used for join ->
BUT000 ->BuPA Master
BUT020 ->BP Address table
ADRC ->Address services.
Hope the above info helps.
Regards
Nisha

Maintain Reference Business Partner for Consumers

hi all,
i have Maintain Reference Business Partner for Consumers through the spro ( t-code : CRMC_BUPA_CONSUM ) that I find it wrong in another day, so can i delete one of the field that i have mantained for a particular reference bus partner ? if i can...please show me how ? i read once i mantain ..i can not change it , is that true ?
best regards
indah puspita

Hi Indah,
If you are using version 5.0 try this,
Start Transaction SE37. Create function module CRM_BUPA_CONSUMER_ADD_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes ( added sales area) to all consumers". Define the following import parameters:
Parameter Name: IV_MAX_BLOCK_SIZE
Type specification: TYPE
Associated Type: I
Default value: 100
Optional: X
Define the following table parameters:
Parameter Name: IT_SALES_AREA
Type specification: LIKE
Associated type: BAPIBUS1006_SALES_AREA
Parameter Name: ET_RETURN
Type specification: LIKE
Associated type: BAPIRET2
Optional: X
Save the changes.
Create function module CRM_BUPA_CONSUMER_CHANGE_SA in function group CRM_BUPA_CONSUMER with short text "Transfers changes of a sales area to all consumers". Define the same parameters as for the above function module.
save changes.
Create report CRM_BUPA_REF_BP_ADAPT_CHANGES in package CRM_BUPA with Transaction SE38.
Title: "Distribution of changes to reference business partner"
Type: 1
Status: P
Package: CRM_BUPA
Save the changes.
Use Transaction SE38 to open report CRM_BUPA_REF_BP_ADAPT_CHANGES and maintain the following text symbols (menu: Goto -> Text elements -> Text symbols):
For CRM Release 5.0, define additionally:
010 Sales organization 20   50
011 Distribution channel 12   50
012 Line of business 6    50
On the "Selection texts" tab page (menu path "Goto -> Text elements -> Selection texts"), maintain the following texts for the variables already defined:
Name: GV_P1
Text: New sales area
Name: GV_P2
Text: Changes to sales area
Save and activate all changes.
check the OSS notes 1014356 if the problem still persists.
reward with points.
cheers,
MARK

Create business partner for existing employee for SAP version 4.7

Hi all !
Do you know of a similar program of function like the HR_SYNC_PERSON in ECC 6.0 but work for version 4.7 ?
I have look in OSS and SAP forum but I have not found.
Our company need to create business partner for all existing employee but for our SAP 4.7 version.
Thanks
Hugo Nguyen

USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Transaction Code - MM41                     Create Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Transaction Code - MM42                     Change Material &
Exit Name           Description
MGW00001            Material Master (Retail): Additional Data
MGW00002            Material Master (Retail): Number Assignment
No of Exits:          2
Rewards if useful.........
Minal

How to Assign Business partner for Vendor Organisation

Similar Messages

Maybe you are looking for