How to assign container resource to routing

Hi,
We have three container resources representing 3 storage tanks with capacity in kilograms. I am not able to assign the storage resources to routing. We are using discrete routing.
Please help.
Thanks,
Andy

Hi andrew3,
Container resource functionality is available only in PP-PI manufacturing and not in Discrete manufacturing, because of which you are not able to assign this resources in routings
Thanks and regards
Sravan maturu

Similar Messages

How to assign PRT in routing

hi,
   please tell me how to assign PRT in routing.
        Thanks
         Parag

hi friend,
for assigning the PRTs in routing go through following ways:-
1. go in TC CF01
2. enter PRT (spanner.hammer,document,etc (only one)
3.enter
4.save the settings
5.go in routing CA01.
6. click on PRT ( first select the operation to which the PRT is to be assign)
7. click on OTHER
8. fill the requirements
9.enter and save.
hope this solution will solved your problem,
thanks and regards,
sachin.

How to assign BOM & Routing to Prod Version.

Dear Frndz,
Pls tell me how to assign BOM & Routing to Prod Version.This is to execute the REM flow.
Regards,
Srini

Hi,
Step1. Create Material MM01
Step2. Create BOM CS01
Step3. Create Rate Routing CA21
Step4. In MM02 for the above material, go to MRP4 View and click on production version pushbutton, and give Version Number and description and the validity dates and rem allowd indicator and then double click on the version line, it will take u to another screen, there you Select rate routing and assign the group & group counter in Planning Data and then in BOM Data u enter Alt BOM & BOM Usage details. For rem tick on REM Allowed check box and then click on Check, if all the assignment is OK then it will give you a message saying BOM & ROUTING available. Save the material master.
Regards
Vinod

How to assign resource (not personel resource) to Activity/WBS/Network

Hi,
can anybody show me how to assign resources (not personel resource) to Activity/WBS/Network, how to plan/manage resources in PS
Thank you
Long

Hi,
Resource Planning will work in Project in two methods.
1.work center:
In work center we will assign resources such as machines etc to execute the Projects
2. Workforce Planning:
In work force planing resource assignment to network activity will happen. Project Team will be assigned to WBSE. Capacity planning / levelling will happen through this functionality.
Refer the below URL to know more details of resource planing in projects
http://help.sap.com/erp2005_ehp_02/helpdata/en/ed/b7853488601e33e10000009b38f83b/frameset.htm
Hope this will help you.
Regards,
Rakesh Pradhan

Help Pls: how to assign a user form to a non active sync resource adapter

I need to implement a non active sync resource adapter, such as oracle database or RACF. When a user is assigned a resource by IdM, an account is created on that resource. I want to transform some attributes during the creation, such as pre-padding the accountId with a letter and zeros. My questions are:
1) I think attribute transformation should be accomplished by user form. is it correct? How do I assign the user form to the non active sync resource?
2) What workflow/userform should I change to accomplish that?
Thanks a lot.

A cleaner option would be to
1. Create a custom form, which could be derived from the Tabbed User Form.
2. Create a delegated admin, with account administrator capabilities at the minimum, and required controlled organization, and assign the above form to this delegated admin -- this is on the same page.
3. Use this form to create IDs on the specific resource.
Now in this custom form you could have the logic on how to create the ID in the specific resource. In fact you could have different logic for different resource. Check the tech deployment guide for the exact syntax, but the field might be:
account[Res_Name].identity
Note that this setting would override the 'Identity Template' setting as defined in the RA configuration.
And BTW, it would really help if you readup the 'Forms' section in the guide.
Regards,
Suveer Chainani

How to deal with resource bundle in multiple applications system

Hi all,
I'm building new system depend on the method of
one common model with multiple applications for the view objects
my JDeveloper version 11.1.2.3
my Question
How can i merge the resource bundle for these applications
as in the common model exists file for resouce bundle
and each other applications contains resource bundle files how can i merge all these file in one Resource bundle file ?
Edited by: 985756 on Apr 2, 2013 12:39 AM

Hi,
Please check anerjusb blog for your answer
Hoping this will help you.
http://andrejusb.blogspot.in/2009/12/reusing-resource-bundles-from-different.html
Thanks & Regards,
Vikas

How to assign the downloaded file path in dropdown menu dynamically?

I have one jsp page. In that jsp page one dropdown menu is there. Dropdown menu contains "save" and "saved content". I download the file using "save" option in menu. That downloaded file path is assigned to the below of the "saved content" option. Then i clicked that downloaded file path, that file will be open.
My problem is how to assign the downloaded file path in dropdown menu. plz help me.

dittu wrote:
My problem is how to assign the downloaded file path in dropdown menu. plz help me.I don't understand your problem.

How to assign Values to nested table and pass as parameter to procedure?

How to assign Values to nested table and pass as parameter to procedure?
Below is the Object and its type
create or replace type test_object1 as object
val1 varchar2(50),
val2 varchar2(50),
     val3 varchar2(50)
create or replace type test_type1 is table of test_object1;
create or replace type test_object2 as object
val1 varchar2(50),
val2 varchar2(50),
     val3 varchar2(50)
create or replace type test_type2 is table of test_object2;
GRANT ALL ON test_object1 TO PUBLIC;
GRANT ALL ON test_type1 TO PUBLIC;
GRANT ALL ON test_object2 TO PUBLIC;
GRANT ALL ON test_type2 TO PUBLIC;
here is the table made of object type:
create table test_object_tpe
sl_num NUMBER,
description VARCHAR2(100),
main_val1 test_type1,
main_val2 test_type2
NESTED TABLE main_val1 STORE AS tot1
NESTED TABLE main_val2 STORE AS tot2;
here is the procedure which inserts values into nested table:
PROCEDURE INSERT_TEST_DATA(sl_num IN NUMBER,
description IN VARCHAR2,
p_main_val1 IN test_type1,
p_main_val2 IN test_type2
IS
BEGIN
FOR rec in p_main_val1.first..p_main_val1.last
LOOP
INSERT INTO xxdl.test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
sl_num
,description
,test_type1 (test_object1(
p_main_val1(rec).val1,
                                   p_main_val1(rec).val2,
p_main_val1(rec).val3
,test_type2 (test_object2( p_main_val2(rec).val1,
                    p_main_val2(rec).val2,
                    p_main_val2(rec).val3
END LOOP;
commit;
END INSERT_TEST_DATA;
here is the anonymoys block which assigns values to the object type and pass values into the procedure:
set serveroutput on;
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1(1).val1 := 'testx1';
inval1(1).val2 := 'testx2';
inval1(1).val3 := 'testx3';
inval2(1).val1 := 'testy1';
inval2(1).val2 := 'testy2';
inval2(1).val3 := 'testy3';
CSI_PKG.INSERT_TEST_DATA(sl_num => p_sl_num,
description => p_description,
p_main_val1 => inval1,
p_main_val2 => inval2
end;
Can anybody correct me.
Thanks,
Lavan

Thanks for posting the DDL and sample code but whenever you post provide your 4 digit Oracle version (result of SELECT * FROM V$VERSION).
>
How to assign Values to nested table and pass as parameter to procedure?
>
Well you are doing almost everything wrong that could be done wrong.
Here is code that works to insert data into your table (the procedure isn't even needed).
declare
p_sl_num NUMBER := 1001;
p_description VARCHAR2(50) := 'Testing Val1';
inval1 test_type1 := test_type1();
inval2 test_type2 := test_type2();
begin
inval1.extend();
inval1(1) := test_object1('testx1', 'testx2', 'testx3');
inval2.extend();
inval2(1) := test_object2('testy1', 'testy2', 'testy3');
INSERT INTO test_object_tpe
sl_num,
description,
main_val1,
main_val2
VALUES
(p_sl_num, p_description, inval1, inval2);
commit;
end;
/See Example 5-15 Referencing a Nested Table Element in Chap 5 Using PL/SQL Collections and Records in the PL/SQL doc
http://docs.oracle.com/cd/B28359_01/appdev.111/b28370/collections.htm#CJABEBEA
1. You don't even need the procedure since all it does is a simple INSERT into the table which you can do directly (see my code above)
inval1(1).val1 := 'testx1';There is no element one (1) of 'inval1' since you haven't created any elements yet. You need to EXTEND the collection to add an element
inval1.extend();And then there is an empty element but 'inval1' is a container for objects of type 'test_object1' not for scalars like 'val1', 'val2', and 'val3'.
So you can't do
inval1(1).val1 := 'testx1';You have to create an instance of 'test_object1'
inval1(1) := test_object1('testx1', 'testx2', 'testx3');And so on for the other collection
You don't need the procedure (as my sample code shows) but once you populate the variables properly it will work.

How to assign task to others with an attachment?

Hi All,
How to assign task to other with an attachment and field values in the actual InfoPath form?
In detail, If a InfoPath form has submitted then task should be assigned to a person with an attachment and some field values which are present in InfoPath form.
How to achieve this scenario?
Thanks in advance!

What you describe is a simple approval workflow. SharePoint comes with approval workflows out of the box.
When a task is created to approve an item, it does not need to have the attachment that is already in the item. The task will contain a link to the item that needs to be approved, so there is no need to duplicate the file attachment.
You may want to read a bit more about the out of the box approval workflows in SharePoint. Start here:
Understand approval workflows in SharePoint 2010
cheers, teylyn

How to assign credit limit to customer group

hi,
sap gurus,
how to assign credit limit to customer group.
can we do that
if we can
plzhelp me
regards,
balaji.t
09990019711.

hi,
You can assign a credit limit to a group of customers, as well as to an individual customer. If a company has different branches, you would define the credit limit for just one customer in this group (the head office) and this customer account then becomes the credit account.
Procedure
To assign a credit account to a branch account, from the Credit Management screen, choose Master data - Change.
Enter the name of your customer, the corresponding credit control area and select the Status indicator.
The system displays the Change Customer Credit Management: Status screen.
Choose the function Edit - Change credit account. In the dialog box that appears, you can enter the credit account (the account number of the customer you are using) to set the credit limit for the entire group.
After you choose ENTER, the system contains the credit limit of the branch as 0.00. The Credit account field displays the account number of the customer for which the reference credit limit is defined.
You can only specify a credit account within a credit control area.
The accumulating total of receivables is recorded both for the reference customer and the "dependent" customer. However, the system checks only against the reference customer as to whether the credit limit has been exceeded.
When displaying the credit account, you can view which customers are referenced to this account. To do this, from the credit account master data screen, choose Edit - Cust. for credit acct.
regards,
Siddharth.

How to install proxy in my router linux inside ?

I have the router type, Digicom RAW300U-A02 , linux inside.
I would like install the proxy software "Squid".
I've connected my router through ssh and i've seen the busybox interface with this commands:
# busybox
BusyBox v1.00 (2012.11.08-03:54+0000) multi-call binary
Usage: busybox [function] [arguments]...
or: [function] [arguments]...
BusyBox is a multi-call binary that combines many common Unix
utilities into a single executable. Most people will create a
link to busybox for each function they wish to use, and BusyBox
will act like whatever it was invoked as.
Currently defined functions:
[, arp, ash, basename, busybox, cat, chmod, chown, cp, cut, date,
dd, df, dirname, dmesg, echo, egrep, env, expr, false, fdisk,
fgrep, find, free, getty, grep, gunzip, gzip, head, hostname,
ifconfig, init, insmod, kill, killall, ln, login, ls, lsmod, md5sum,
mkdir, more, mount, mv, netstat, nslookup, passwd, pidof, ping,
ping6, ps, pwd, reboot, rm, rmdir, rmmod, route, sed, sh, sleep,
sysctl, tar, test, tftp, top, traceroute, true, udhcpc, udhcpd,
umount, uname, uptime, usleep, vconfig, wc, yes, zcat
how to install software with only those commands ?
i should download the sw directly from busybox, meaning from router, or from my pc and then put it in the router ?
thanks
ps.
the why is limiting bandwidth usage of one pc.
Last edited by otto88 (2013-09-13 20:05:38)

hmmm not sure if this will work at all because you have no idea as to what dependancies your going to need or if you will have the space required. Adding to that many routers load the OS into ram from a rom chip therefore you will loose everything you do on a reboot!
You could look into JTAG hacking your router at the risk of bricking it OR just get an old unused pc & re-purpoose it as a proxy with rules set up to only affect the target pc you wish to restrict.
If you insist on putting all of this in your router you will need space for the cache aswell also this will impact performance of the router due to more processes running & no clue of the resources the router has.

How to assign numbers in external number range?

Dear experts,
Since NUMBER_GET_NEXT can only be used to assign numbers in internal number range, how to assign numbers in external number range?
So far, I only know the NUMBER_CHECK function module to deal with external number ranges and it only check a number whether it lies in any external number range or not, but it doesn't update any number range status. What I need is a function module like NUMBER_GET_NEXT that supports external number range.
Thanks in advance.
Regards,
Haris
Edited by: harissahlan on Oct 19, 2011 5:44 AM

With external number range, there is no updating of the number range objectt. The only thing you need to know is whether the number you wish to assign is allowed according to the external number range. And also check if there isn't already an object/document with the same number in the database.

How to assign a task to Reuestor in OIM 11g

How to assign a task to a requestor (who has raised a request for other user).
I created a Task assignment adapter and mapped variable in Process definition as
Map To: Request Info
Qualifier: Requester User Login
Still it returns null and default task is assigning to System adminstrator. I am pasting the Task Assignment code here. User key value coming as Null.
Do you have any idea what is the exact mapping required in Process definition.?? Pls note: I am using OIM version 11.1.1.5.0
public class TaskAssignmentToUserAdapter {
     Logger logger = Logger.getLogger("COM.IDM.PROV.COMMON.ADAPTERS");
     public String getTargetType(String targetType){
          return targetType;
     public String assignTaskToUser(String userKey,tcDataProvider dataProvider ){
          System.out.println("The user key value:" +userKey);
          return userKey;
     }

Not sure what sample code I can give you, but you need to do a query in your adapter like:
select REQUEST_KEY from OIU where ORC_KEY='?'
Here ORC_KEY should be mapped to the process instance key.
Once you have the Request key, you can use RequestServcie APIs to get the requester information. http://docs.oracle.com/cd/E14571_01/apirefs.1111/e17334/oracle/iam/request/api/RequestService.html#getBasicRequestData_java_lang_String_
Or if you don't care then get the requester key from the request table. Thus you can have the final query as:
select USR_LOGIN from USR where USR_KEY=(select REQUESTER_KEY from REQUEST where REQUEST_KEY = (select REQUEST_KEY from OIU where ORC_KEY='?'))
HTH,
BB

How to assign an order to a GL account

Hi all,
Can anybody please let me know how to assign an order to the GL account?
Thanks,
S.Sumana.

Hi,
There is no such an assignment. When you post a document, you define your G/L accounts and cost objects. If you want to make a default internal order for certain cost element, you can go to KA02 or OKB9 and define the defaults there.
Regards,
Eli

How can i use a second router to replace verizon fios router?

Okay so just as the title says how do i use a second router? I got a cisco valet router... I don't know how to use it because the verizon router/modem is wierd i know how to use a router if i only had a modem but fios gives router/modem so how can i use my 2nd router? The current verizon fios router/modem is b/g mode and i wanna change to b/g/n so i can get a better speed from my internet... SO how can i use my 2nd router? I tried this http://www.dslreports.com/faq/verizonfios/3.0_Networking#12506 but i don't get it can someone guide me better or make a video explaination on how to use a 2nd router? I have it connected with see as in pic i connect from my router Internet port to wan port and the ethernet lan port to the ethernet lan port on verizon fios and no work please help...

OK, so with this, we have a few options. You appear to have a MoCa connection to the ONT, hence the coaxial cable being present.
1: The ActionTec can be bridged to the Valet router. This will not require any additional cabling, however it will require a small amount of work to have working. You will also require the ActionTec still in the mix, even though it will not be acting as a router anymore with this configuration.
Visit http://www.dslreports.com/faq/16077 and look at Option 4. There is a thread linked that will allow you to set up the ActionTec as just a MoCa bridge, and will pass the Public IP to your router. You will, in order for this to work once the ActionTec is bridged, need to connect the cable from your Valet router's Internet port, to the ActionTec's LAN port and nothing else goes to the ActionTec. From this point, your Valet should run as your primary and everything should connect through your Valet. If you are adding another router, a Netgear N300, you should perform the LAN to LAN setup, which we will talk about once you've got the Valet working correctly. LAN to LAN configs require a custom setup, so do not set up the Netgear for now.
2: This is my preferred method, which would be to run an Ethernet cable to the ONT. Option 6 in the FAQ. This will require spaking to Verizon to have them move your ONT to Ethernet, but once they do this, you can disconnect the Coaxial Cable from your ActionTec router, and plug in your CAT5/CAT6 cable from the ONT to the ActionTec's Internet/WAN port. Use the ActionTec to ensure everything is working after the switchover, and once off the phone, log into the ActionTec, perform a DHCP Release, and then prompty power off the ActionTec. Once this is done, plug the CAT6 cable into your Valet router's Internet port. You should from this point, be able to connect to the Cisco, and if the DHCP Lease was broken successfully, the Cisco should begin serving up your Internet connection. If it does not, leave the Cisco powered off for a few hours to break the DHCP lease, and then power it up. If the Valet does not work, still, give the Valet a factory reset and set up this router again, with the Ethernet cable from the ONT connected to it.
I would just take a good luck at the FAQ linked above again, and see what would work the best. Easiest thing to do is to get the ONT moved to Ethernet, which allows you to eliminate the ActionTec unless you need it in the future for TV service, and also allows you to use any router with ease.
Once the Valet is up and running and holds your Public IP address from Verizon (use http://whatismyip.com/ to determine this) , and also serves up IPs to devices on your network, post back and we can help you set up the Netgear. If you have any issues while setting this up, fall back to the ActionTec. It's factory reset will work without configuration needed, regardless of you being on Coax or Ethernet.
========
The first to bring me 1Gbps Fiber for $30/m wins!

How to assign container resource to routing

Similar Messages

Maybe you are looking for